Cisco 7965 question

Hello, I'm the new admin for our CUCM ver. 8. Currently, I have a customer with a 7965 phone who would like to have the ringing on his secondary keys turned off. He still wants his primary line to ring just not the other 2. This has to be an easy fix but I just can't find any info on it. Thank you for your help

Hi Christopher,
Go to Device>Phone>Find and find the desired phone. Once you bring it
up click on the actual 2nd and 3rd DN's listed on the top left of the page.
The Ring settings are down towards the bottom of each DN config page;
Change them to either Flash or Disable
Line 2 on Device SEP0022900411F3
Display (Internal Caller ID)
Display text for a line appearance is intended for displaying text such as a name instead of a directory number for internal calls. If you specify a number, the person receiving a call may not see the proper identity of the caller.
ASCII Display (Internal Caller ID)
Line Text Label
ASCII Line Text Label
External Phone Number Mask
Visual Message Waiting Indicator Policy
Use System Policy Light and Prompt Prompt Only Light Only None
Audible Message Waiting Indicator Policy
Off On Default
Ring Setting (Phone Idle)
Use System Default Disable Flash Only Ring Once Ring
Ring Setting (Phone Active)
Use System Default Disable Flash Only Ring Once Ring Beep Only Applies to this line when any line on the phone has a call in progress.
Call Pickup Group Audio Alert Setting(Phone Idle)
Use System Default Disable Ring Once
Call Pickup Group Audio Alert Setting(Phone Active)
Use System Default Disable Beep Only
Recording Option
Call Recording Disabled Automatic Call Recording Enabled Application Invoked Call Recording Enabled
Recording Profile
< None >
Monitoring Calling Search Space
< None > MRC LP 911 CS MRC LP Calgary Local CS MRC LP Complete Access MRC LP Intl and Long Distance CS MRC LP Long Dist CS MRC LP On Campus Multicall Line2 CS Multicall Line3 CS Multicall Line4 CS Robs Hotline Security Hotline Test Css 12 VMRestrictedCSS Westmount LD Westmount Local CSS
Log Missed Calls
Cheers!
Rob
"Clocks go slow in a place of work
Minutes drag and the hours jerk"
-The Clash

Similar Messages

Cisco 7965 Phone Logs

I have a client that need to recover his Cisco 7965 phone logs from the month of June and wanted to understand why he only has 2 weeks worth of phone logs for the month of August.
Thank you,
bcrespo

The phones have a limited amount of memory and rotate the logs, if you don't see them that far in the phone, nothing to do here.

Issue defining DN 7965 because using 7965 SD Phone button template on Cisco 7965 VoIP phones

I am having issue with assigning DN7965 to a phone device. Error message indicates that 7965 is already associated and in use. We have associated phone template 7965SD because most our phones are CISCO 7965. Is there a way to overcome this issue ?

Hello, All!
I have continued testing this in my lab and have come up with the following results.
When setting up a new device, TAPS will generate an error if the DN is already in existence across multiple devices.
If replacing a device, you must use the same model device or else TAPS will generate an error.
Unfortunately, based on the above rules, I was unable to utilize TAPS for bulk upgrade of user devices from 7960 model phones to 7965 model phones. However, I have come up with an alternate solution.
Note: This solution would only need to be used in a scenario where you do not want to assign a MAC address before physically deploying the equipment. The below solution provides the flexibility of creating the phone configurations prior to deploying the equipment without having to have all hardware specifically assigned to a user/DN.
Bulk Update Cisco Phones without MAC Addresses
Bulk Admin > Phone > Export Phones > Specific Details (Pull relevant information, DN(s), Description, Owner User ID, CSS, so on…)
Download the file, change to csv, open in Excel
Clear contents of “Device Name” field. Parse through and update other fields if needed.
Save a copy as CSV, upload to CUCM as Insert Phones > Specific Details
In CUCM, create a Phone Template for import
Bulk Admin > Phone > Insert Phones > Choose File > Choose Phone Template > **Important** Select Create Dummy MAC
Run Job
Once job is completed, all 7965 devices will be created with a BAT prefix and dummy MAC address, check Device > Phone to confirm
…When ready to activate
Device > Phone > Search by DN for BAT device
Open device, change MAC address to new 7965 hardware, check “Is Active”
Click Save.
Plug-in 7965 device to network. When the phone comes online and gets past firmware it will pull newly generated SEP config with user ext.
I hope this helps. I appreciate the communities continued assistance.

Cisco WebView Questions

We utilize webview us our reporting / workforce tool for our in house call center. But there have been doubts pulling outbound number using webview. I stumble a report in Webview (Agtskg04). It shows External Out Tasks and Internal Out Tasks, still got confused in the definition of these two. Please help me understand on the difference with External Out Tasks and Internal Out Tasks. Most of our agents has more number on Internal Out Tasks, which I think is the outgoing calls to another agent or anthoer department or extension internally. But it's not what is happening they usually calls out to customers and not transferring to another extension.Thanks!
Second inquiry, What report in WebView that account all hours of an agent to calculation for the utilization? Aside from the Note Ready Summary Report, 'coz when I sum up all Not Ready times and Handle Time it does not add up to the total hours that the agent is login thru CTI.
Waiting for you brillian ideas,
ryanS>>

Thanks Nathan,
I have follow-up questions, this might some sound simple questions to you but we just don't know these things. We were never trained on Cisco WebView basic concepts and all other technical stuff that an end-user show know about. We were just reading pdf files online, which is very technical ( in terms of terminilogies). I am not a network engineer or a Cisco certified person our team most came from BPO companies and we're hired to do a workforce/reporting tasks in an in-house call center which they utilize Cisco phones and this Cisco WebView. I would really appreciate your time on this Nathan and all other Cisco WebView expert people.
Now, to my follow-up questions. what do you mean by a CallManager cluster?. Let me give a background on our telephony system here. All our departments here in our company uses Cisco phones worlwide. And we have a division that is on a call center set-up. They have two extensions US extensions and local (philippines) extensions. So when at times they need to callback our customers in US, they'll dial 991 then the customer's number. AND sometimes they will call to our local security in the building to ask for something or calling to our facilities. So, I'm guessing that this callmanager cluster are those phones or extension within our company like security personnel, to our finance team, etc. But when they call to our customers in US, which I assume outside our CallManager cluster? Is this gonna fall under Internal Out Tasks? Please have your explaination in a simple way as you can.
Thank you so much for those who are willing to help me understand!
sincerely,
ryan suedo

Cisco AP1550 Questions

I'm planning to use these APs in our rail yard. Basically when a train enters the yard I want it to start talking to these APs and to continually talk to them as they roll through the yard to download data logs. I'd like to get a rough idea of the range of these APs if using directional antennas pointing along the tracks and how close they'll have to be to form a mesh so I can save infrastructure costs from having to run ethernet to the poles or whatever they'll be mounted on.
Any advice or tips would be greatly appreciated.
Thanks
Joe

I would highly suggest "against" deploying this as a Mesh solution as Mesh is not suitable for "mobile" deployments (ie. MAPs on your "Trains" parenting with other stationary RAP/MAP when they roll in/through/out your rail yard). If your planning on mounting APs on the trains that are mobilized, I highly suggest you consider a WGB deployment as they can handle the mobility of this situation. Now, these WGBs on the Trains can most certianly connect to your Mesh infrastructure in the train yard, just don't attempt to deploy MAPs on the trains themselves.
Cisco should tell you the same as a "mobile" Mesh solution has caused severe problems for many customers; this is not their intended design.
Sorry, this doesn't touch on your "range" question, but just want to make you aware that this type of "mobile" Mesh deployment will most likely create a nightmare for you.

Cisco 2010P Questions

Hi all,
I have just purchased the Cisco 2010P-G5 Small business switch.
Questions:
Ø Does this switch support / work with the Cisco call manager and the Cisco Phones
Ø Can you automatically backup the config e.eg daily.
Many Thanks

Gary,
So you've purchased an SFE or SGE Small Business Switch. To answer your questions in order:
1. The SFE or SGE series is a Small Business Switch supported by the Small Business Support Center (SBSC) not traditional Cisco TAC. Communications Manager on the other hand is a TAC supported product, so as you can see the first issue is with two separate support teams. Also the SFE/SGE switches are not configured or managed with the same tools as traditional Cisco gear and are not IOS or CLI based. The SFE/SGE switches are not designed to fully integrate with Communications Manager; however you could very well likely get it working (they are 802.3af standards based PoE); but the other broader issues identified above should help you understand that's not a best practice.
2. As far as automatically backing up the configuration, there's not a built-in feature to do that if that's what you're asking about. You can run dual images on those switches however.
Hope this helps!
Glenn

Cisco ACS questions for new deployment

Hi all, I am designing a new Cisco ACS deployment to handle AAA services for all our network devices. I have read the user guides and I understand the different deployment scenario's. However, what i could not find in the user guide, were answers to the questions below...
Number of AAA clients, using command authorisation, that a single ACS server can handle?
Does a Large Add-On license (for more than 500 nodes) need to be purchased for every ACS server, or does one license cover the whole deployment?
How is AAA load-balancing performed? Does each AAA server need to be defined individually on every Network device? Or is there some intelligence build in to the AAA servers so that they can distribute the load themselves? Or can a load balancer be used like you can with Cisco ISE PSN nodes?
Thanks
Mario

Supported number of clients depends on License for example
The base license is required for all deployed software instances and for all appliances. The base license enables you to use all ACS functions except license-controlled features, and it enables standard centralized reporting features.
The base license:
Is required for all primary and secondary ACS instances.
Is required for all appliances.
Supports deployments that have a maximum of 500 NADs.
The following are the types of base licenses:
Permanent—Does not have an expiration date. Supports deployments that have a maximum of 500 NADs.
Evaluation—Expires 90 days from the time the license is issued. Supports deployments that have a maximum of 50 NADs.

ASA and Cisco VPN question

I am having an issue on a new ASA. I am able to connect to the customer?s network using the Cisco VPN client, but I am not able to PING or access anything on the customers network. What needs to be done to fix this???
There is a route on the customer?s router pointing back to the firewall for the IP range you get when you VPN in?
Thanks,
Chris

Thanks, please rate.
No, it is needed for pix as well. ASA 7.2, the command is "crypto isakmp nat-traversal".
It is necessary if vpn client is connecting behind nat. Allows ipsec to be encapsulated in udp port 4500. The transport tab I mentioned is in the connection entry properties, if you click modify. You will see enable transparent tunneling over udp.

Cisco LMS questions

I need the help from the expert of LMS installation , i need to make sure that services must be as the following
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks VisiBroker Smart Agent: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
Other things i will install on cisco server 2008 service pack 2.

Hi Islam,
Services STARTUP type is Absolutely correct..
Thanks
Afroz

CISCO 2960G Questions

As a novice, I have come upon some questions regarding the 2960G that readily available:
What type of memory is available on the 2960G, 24port?
Besides the configuration file, what other permanent data is stored on the 2960G?
If the power supply fails, what data is retained on the 2960G?
If the power supply fails, are any routing tables or IP addresses retained on the 2960G?
Assuming the 2960G was connected to a sensitive network would there be any sensitive material retained upon loss of power?
Thank you for your patience,
Mike

Hi
Normally this switches will have 32MB of Flash memory and 64MB of DRAM. Below you can see a summary of what is store on each and what happens if the switch is power off.
RAM, also called dynamic RAM (DRAM), has the following characteristics and functions:
Stores routing tables
Holds ARP cache
Holds fast-switching cache
Performs packet buffering (shared RAM)
Maintains packet-hold queues
Provides temporary memory for the configuration file of the switch while is powered on
Loses content when switch is powered down or restarted
NVRAM has the following characteristics and functions:
Provides storage for the startup configuration file
Retains content when switch is powered down or restarted
Flash memory has the following characteristics and functions:
Holds the operating system image (IOS)
Retains content when switch is powered down or restarted
Hope this helps.

JTAPI / Cisco - General Question

Hi - Hoping someone out there might be able to help me. I apologize if this is in the wrong forum.
We have a fully functional Cisco CallManager / IPT system implemented, and I am wondering where to begin looking at the JTAPI - knowing nothing about phone hardware / network technologies, and being an intermediate level Java developer, what interfaces / classes pertain to this implementation? Where (aside from the white papers I am currently reading) can I go for some "new to JTAPI" help?
Thanks in advance, Geoff

Hi Geoff,
You might have already found out what you are looking for. But still, just for the records, you can find all the information you are looking for, at this link -
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_programming_reference_guides_list.html
Thanks,
Vasu

Cisco 2801 Question

I'm trying to open a port in a Cisco 2801, the port 3001 to give internet access for a cisco switch which IP is 172.16.8.40
thanks in advance
cisco 2801 config
match access-group 110
class-map type inspect match-all vpn-traffic
match access-group 111
policy-map type inspect priv-pub-pmap
class type inspect all-private
inspect
class class-default
drop
policy-map type inspect pub-priv-pmap
class type inspect vpn-traffic
inspect
class class-default
drop
zone security private
zone security public
zone-pair security priv-pub source private destination public
service-policy type inspect priv-pub-pmap
zone-pair security pub-priv source public destination private
service-policy type inspect pub-priv-pmap
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
lifetime 84600
crypto isakmp policy 5
encr 3des
hash md5
authentication pre-share
group 2
lifetime 84600
crypto isakmp client configuration group BFvpn
key vPnBr1TT@ny9687!
dns 192.168.2.10
pool vpn_ip
acl remotevpn
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set aes-256-sha esp-aes 256 esp-sha-hmac
crypto dynamic-map vpn 65535
set transform-set ESP-3DES-MD5
crypto map vpn client authentication list AAA-VPN
crypto map vpn isakmp authorization list AAA-VPN
crypto map vpn client configuration address respond
crypto map vpn 65535 ipsec-isakmp dynamic vpn
interface FastEthernet0/0
ip address 75.150.67.105 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
duplex auto
speed auto
crypto map vpn
interface FastEthernet0/1
ip address 172.16.250.1 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
zone-member security private
speed 100
full-duplex
interface FastEthernet0/3/0
switchport mode trunk
no ip address
interface FastEthernet0/3/1
no ip address
interface FastEthernet0/3/2
no ip address
interface FastEthernet0/3/3
no ip address
interface Vlan1
no ip address
interface Vlan413
ip address 170.163.128.202 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
router eigrp 1
network 172.16.0.0
ip local policy route-map LocalPBR
ip local pool vpn_ip 172.16.251.10 172.16.251.20
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source static tcp 172.16.8.40 3001 172.16.250.1 3001
ip nat inside source route-map NAT-HFC interface FastEthernet0/0 overload
ip nat inside source route-map NAT-OPT interface Vlan413 overload
ip route 0.0.0.0 0.0.0.0 75.150.67.106 track 3
ip route 0.0.0.0 0.0.0.0 170.163.128.201 5
ip access-list standard remotevpn
permit 172.16.0.0 0.15.255.255
ip sla 1
icmp-echo 75.150.67.106 source-interface FastEthernet0/0
frequency 30
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo 170.163.128.201 source-interface Vlan413
frequency 30
ip sla schedule 2 life forever start-time now
access-list 1 permit 170.163.0.0 0.0.255.255
access-list 1 remark for Telnet & SNMP Restrictions
access-list 1 permit 172.16.8.0 0.0.3.255
access-list 7 permit 172.16.8.40
access-list 7 permit 172.16.8.41
access-list 7 permit 172.16.8.42
access-list 7 permit 172.16.8.43
access-list 10 permit 75.150.67.105
access-list 20 permit 170.163.128.202
access-list 102 deny   ip any 10.0.0.0 0.255.255.255
access-list 102 deny   ip any 172.16.0.0 0.15.255.255
access-list 102 deny   ip any 192.168.0.0 0.0.255.255
access-list 102 permit ip 172.16.0.0 0.0.15.255 any
access-list 102 permit ip 172.16.0.0 0.15.255.255 any
access-list 110 permit ip any any
access-list 111 permit ip 172.16.251.0 0.0.0.255 172.16.0.0 0.15.255.255
access-list 111 deny   ip any any
route-map LocalPBR permit 10
match ip address 10
set ip default next-hop 75.150.67.106
route-map LocalPBR permit 20
match ip address 20
set ip default next-hop 170.163.128.201
route-map NAT-HFC permit 10
match ip address 102
match interface FastEthernet0/0
route-map NAT-OPT permit 10
match ip address 102
match interface Vlan413
snmp-server community chimenet#3000 RO 1
snmp-server enable traps tty
tacacs-server host 170.163.248.63
tacacs-server host 170.163.248.64
tacacs-server directed-request
tacacs-server key 7 06050728414B071C1154405B5C54

Hello Jherrera,
Trust you are doing great.
Could you please additionally configure "ip nat outside" under interface Fastethernet 0/1 and "ip nat inside" under interface vlan 413 and interface fa 0/0 and check if the its working.
Regards,
Mohit
**Please rate if you find this post helpfull

802.1 aaa entries cisco aironet question

Is it possible to have multiple aaa entries for RADIUS servers on a Cisco Aironet?
What im trying to achieve is two SSID's, one on one VLAN and another on another VLAN..
The trouble is that our RADIUS servers are using MSCHAP v2 authentication and they are for two separate servers with different user accounts on two separate VLANs
What I am hoping to do is create two SSID's on seperate VLAN's, with a separate radius entry for both SSIDs

yes it is possible. On the ssid manager page you have the option of setting up EAP server and prioritize it according to the SSID.

How to setup Cisco IOS with multi public IP's

I'd like to set up a little network environment. We have bought 2 different subnet from our ISP.
The WAN internet connection: xx.yy.81.61/26
WAN gateway: xx.yy.81.1
First subnet : xx.yy.81.80/30 (this has the same first 3 octet as the WAN, probably doesn't count, because it is a different subnet)
Second subnet : zz.uu.156.48/29
As you can see in the first diagram, the xx.yy.81.61/26 is assigned to the CISCO's outside(WAN) interface, the internet connection is alive, all hosts in LAN have internet connection. We want to assign some hosts with public IP address (for webserver sake). I'm not familiar with networking, so please forgive me if I make some silly questions. In brackets, I make the cisco router setup with the "Cisco Configuration Professional 2.8" PC program.
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
| WAN (xx.yy.81.61/26)
| Gateway(xx.yy.81.1)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment (vlan)
10.10.10.1/24
I want to set up the CISCO:
- The question is, that how can i make my subnets alive? I just want to transmit(NAT) some public IP from subnet to specific HOST computer(or inverse?). I have made the NAT rules (zz.uu.156.50 <- 10.10.10.xxx), but no result, the public IP is unreachable(no ping, no traceroute).
- Do I have to assign a second IP(virtual) address from subnets to the outside interface(WAN). If yes, than how? Or my ISP has to route the subnets to my WAN IP address(xx.yy.81.61) ?
The truth is that the original setup was different, as you can see in the second diagram. In this case the both subnet was alive. Now, I unmounted the ISP owned HP router and I attached the CISCO directly to the modem output(first diagram), because we had some DNS issues and I think it is unnecessary to be 2 router sequentially. Please indicate if i was wrong.
I mention, that by the original setup, I could access the HP router (only the login interface) from internet with the first IP of the subnets (xx.yy.81.81 from the first subnet and zz.uu.156.49 from the second subnet).
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
|
|
+-------+
| | blackbox, no acces
| | ISP owned HP router
| |
+-------+
|
| WAN (xx.yy.81.82/30) or WAN (zz.uu.156.50/29)
| Gateway(xx.yy.81.81) Gateway(zz.uu.156.49)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment
10.10.10.1/24
Thanks for any answer or suggestion!

Hey,
Proxy-ARP should take care of this!
As long as you assign the NAT rules into the IOS Router it should start replying to any ARP request to those IPs on different subnets.
Of course the ISP should forward this ARP requests to you!
So make sure Proxy-ARP is enabled in the WAN interface and you should be good to go (as long as the NAT rules are good).
Regards,
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us

Cisco Expansion Module 7916

I have an issue with the 7916 expansion module on a Cisco 7965 phone. The sidecar loads properly (wilt all the configured extensions) and the page 1 & 2 buttons on the bottom luminate correctly. However, the side LED buttons do not light when a line is in use. I can press an extension and it calls correctly but only briefly flickers green then does not light. I have switched sidecar, power supply and phone as well as looked at the configuration setting in CM. Any config/solution someone has come across that they may be able to help with? Thanks in advance for any information.

Hi Ronald.
Did you try to configure one of 7965 button as BLF speed dial?
Did it work?
Which version of CUCM are you running?
Which firmware 7965 is running?
Let me know
Regards
Carlo

Cisco 7965 question

Similar Messages

Maybe you are looking for