Cisco 831 CRWS (web utility) not loading

Greetings. I just unwrapped my new Cisco 831 router, and everything worked out of the box (my post in this newsgroup is proof). However, when I attempt to access the CRWS web setup utility, I get a "Please wait while we check router version, IOS version, ..." and a blue progress bar infinitely fills up and re-starts-- it never allows me to get past this point and actually access the utility. My only guess is that I'm using Firefox v1.5 and this browser isn't supported-- but this would surprise me. Has anyone had this happen to them before, and does anyone have any possible solutions? Thanks in advance!

Hi
The system requirements for CRWS are:
* PC using the Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or Windows NT operating system.
* Netscape 4.5 or better
* IE 4.0 or better
* Java enabled on the Web browser
* Pentium II, 166 MHz or higher
* 800 by 600 screen resolution with 256 or more colors
It seems that Firefox isn't explicitly supported. Pls try IE or Netscape and see how you go.
Hope that helps - pls rate the post if it does.
Regards,
Paresh,

Similar Messages

Cisco SA 520W Web Interface not loading.!!

Hi
Im going to start with saying this appliance is really winding me up!! The unit has been working fine for a while and i now need to make some changes. The unit is passing traffic fine, URL filtering is working fine however when i load the web page to control it says "The server is down.
Connection failed " I have rebooted the device numerous times with no luck. I have tried a different laptop, cleared out cookies and all ie cash. tried a different browser. To no avail. Am loosing faith in this device
Any ideas

Hi accidentexchange,
Did you fail to log in when accessing the SA 520W thru both HTTP and HTTPS?
https://LAN_IP_address_of_SA520W/
http://LAN_IP_address_of_SA520W/
Furthermore, can you give us an overview of your network topology and user info. If possible, can you provide us the configuration and dbglogs from your SA 520W so that I can forward to the development team?
To get the dbglog from SA520W, login through web UI and in the browser enter the following URL:
https://LAN_IP_address_of_SA520W/scgi-bin/dbglog.cgi
These logs will store password, so please remove any password sensitive information. Also if you are not comfortable posting the dbglog on the community, you can send it directly to me through private message.
Cheers,
Julio

Web Pages not loading on Mobile Devices

Browsing web pages not working on mobile devices
I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
previously i had adsl from bt and didnt have these issues.
Solved!
Go to Solution.

Try turning Smart Setup off.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Devices where there are known to be problems include:
Some Apple devices including iPhone 5 and Apple TV
some Android smartphones
Xbox<
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Cisco Contact center Web page not opening

Hi,
I am using Cisco Contact center version 7 in High availability mode. Web page of the primary server is not opening, but web page of secondary server is working. If I restart the primary server the web page starts working but after sometime its stop working.
Please help me to resolve the same.
regards,
Neo

What Sr do you have on the UCCX 7.0(1) version ?
Your issue looks similar to the defect "CSCsu22366 - AppAdmin Page does not load -World Wide Publishing service stuck "
Once you see the issue can you try the following work around
====
Login to appadmin from the 2nd node, go to the Control Center page, select the broken node,
and restart it's CRS Administration process
=====
Hope this helps
Anuj

Why is my web site not loading correctly chrome does and firefox 3? NOT HAPPY

when I installed 4 it only loaded have the page on my home
and the rest looked absurd have deleted it and useing old version
I have not a clue what is going on ..not happy at all with this version Chrome works perfect older version firefox ok
what is going on ? with version 4

Hi ritawickham,
We've actually put together a troubleshooting section for [https://support.mozilla.org/en-US/kb/web-pages-dont-load website loading issues]. Have you had a chance to browse the documents there? If not, you should take a look. There is a lot of useful information.
Hopefully this helps!

Web View not loading in Cocoa Applescript application?

Hey guys...me again, and I need help, AGAIN, haha.
I found a tutorial for web views in Cocoa Applescript because I couldnt find it anywhere, but it wont load.
The web view does not display anything when the app is launching.
I am using Cocoa Applescript.
This is my AppDelegate.applescript I am using for the web view:
script AppDelegate
property parent : class "NSObject"
    property ourWebView : missing value (* This links the webview *)
          on applicationWillFinishLaunching_(aNotification)
-- tell ourWebView to setMainFrameURL_("http://tinyurl.com/RMHTML")
          end applicationWillFinishLaunching_
          on applicationShouldTerminate_(sender)
-- Insert code here to do any housekeeping before your application quits
                    return current application's NSTerminateNow
          end applicationShouldTerminate_
    on myButtonHandler_(sender)
        activate application "Terminal"
        tell application "System Events" to keystroke "Desktop/RecoverDevice"
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "setenv auto-boot true"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "saveenv"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "System Events" to keystroke "reboot"
        delay 1
        tell application "System Events" to keystroke return
        delay 1
        tell application "Terminal"
            quit
        end tell
    end doMyButton_
    on myButtontwoHandler_(sender)
        open location "https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YF2DKZYRH6B GA"
    end doMyButton2_
end script
Whoever helps me will be thanked in my apps about page...
Thanks, Adam B

When I launch it...it says this:
2012-01-22 17:21:01.658 RecoverMe[96706:407] Error loading /Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit: dlopen(/Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit, 265): no suitable image found. Did find:
          /Library/Application Support/SIMBL/Plugins/GreaseKit.bundle/Contents/MacOS/GreaseKit: GC capability mismatch
Does that have anything to do with it not loading the webview?

Web page not loading correctly

This web page does not load correctly in Firefox but is okay in other browsers:
http://forums.techguy.org/
Can anyone help please?

Hi, I don't think it's important to understand the results, it does us no good, other than to know they've made a mistake when designing that page, perhaps just a minor one that affects several thing after that, and that some Browsers can handle or figure out that error.
A bit like I ask a browser to draw me a map of what's at 1st & James street, and there is no 1st & James, but there is a nearby 1st & Main street, & a 2nd & James, so one browser refuses to draw what's at 1st & James since there is nothing, another draws what's at 1st & Main street, & what's at 2nd & James, figuring that must be what's wanted.
Bottom line, someone caring for that site needs to fix the error, or you can use a browser that handles that problem.

SGE2000 Web Interface not loading

Getting a white screen in both frames of the web interface after logging in. Can't figure out why it won't load.
SW ver 3.0.0.18
Boot: 2.0.0.03
HW Ver: 00.00.01
Have tried using Easy Upgrade tool and get a warning : Did not find device information. Application will terminate.
Step1:Trying to open telnet connection...
Step1:Gathering information
show system--checking result for "show system unit 1-2
Step1:Type :
Step1:OID : 1.3.6.1.4.1.9.6.1.72.2000.2
Step1:Sys Name : Corporate
Step1:Location : ServerRoom
Step1:Sys Contct : IT
Step1:Mac-Address : f0:25:72:89:9e:e2
Has anyone else run into this issue? Any ideas how to resolve?

Hi parking, if the GUI will not load please try the following;
The same computer using IE, Firefox, Chrome,etc
Different computer with the mentioned browsers (preferably Windows 7 or older)
If none of these work, try to factory reset the switch as it sounds like the software is hung

OutlineLoad utility not loading data

Hello,
I am loading data into Workforce Planning 11.1.2.1 with OutlineLoad utility (In "Administration>Data Load Settings" Data Load Dimension is "Employee", Driver Dimension is "Account" with loaded account members listed).
I load accounts of "Date" data type which are in "yyyymmdd" format in my CSV file - so these accounts are not loaded.
I will be very grateful for any hints on how to resolve my issues!
Thank you!
Edited by: Jedi Knight on Sep 20, 2012 2:21 PM

I am not sure which patch version you are running but from 11.1.2.1.102 there was an additional parameter available for when loading date type members.
"The date format setting for accounts of type “Date” was not always respected in the Outline Load Utility. This patch resolves this issue. It also enables youto override the date format defined in the ‘Attribute Date Format’ setting in the ‘Application Settings’ dialog using the new “/DF” parameters:
· /DF:MM-DD-YYY
The date data type values on a data load are assumed to be month-day-year. For example, 12-23-2011
· /DF:DD-MM-YYYY
The date data type values on a data load are assumed to be day-month-year. For example, 23-12-2011
· /DF:YYYY-MM-DD
The date data type values on a data load are assumed to be year-month-day. For example, 2011-12-23
This is a sample .csv file and command parameters:
Value,Driver Member,Data Load Cube Name, Point-of-View
12-22-2011,aDate,Plan1,"e1,Local,Jan, Current, BU Version_1, FY11"
OutlineLoad /A:<app name> /U:<admin user name> /DF:MM-DD-YYYY /I:c:\<.csv file name> /TR /L:c:/ outlineLoad.log /X:c:/outlineLoad.exc"
Cheers
John
http://john-goodwin.blogspot.com/

Web sites not loading on EDGE at my office

I've been using my iPhone 8 gig successfully to surf the web and the YouTube app on both Wi-Fi and EDGE (even though its slow) at home, at the gym, and at Starbucks. However, right now it's not working. We don't have wi-fi set up in our office, so I have to go through EDGE. Whenever I try to load a site I get the error "Safari can't open the page because it can't find the server." I have full bars and am able to make outbound calls and receive inbound calls. Any ideas?

I am having the same problem here, as well. I was able to load web pages and email earlier today (albeit seemingly slower than I was able to this weekend) and now, all of a sudden, it's not loading web pages, my weather and stocks widget or email. I am getting the same error message you mentioned. I have full signal strength, the little "E" up at the top and nothing. I've even tried turing off wifi and restarting the phone to force it to use EDGE as the default also with no luck.

Web address not loading

Recently upgraded server for my company web site and associated sites. They all contain the same url with different endings, ie: /client or /php etc. However, now within my home network, those urls will not load. Have tried it on multiple computers and different browsers. So I am assuming the modem or airport express are still trying to find the old server although the url remains the same. My computer finds the new server just fine outside my home network. I have had my ISP reset the modem and I have reset with every option the Airport Extreme Router. No luck.
Has anyone else experienced this problem?
Does anyone have a procedure or suggestion that might fix this problem that I haven't already tried?
Thanks for your help.

alba123,
With WiFi off, do you see an E outlined in blue next to that AT&T logo?
If not, you are not gettinga cellular data connection.
Has it worked previously?
If it has worked previously try turning airplane mode on for 30 seconds, and then back on. If its not working after that try reseting the iPhone by holding down the sleep/lock switch and the home button until you see the Apple logo.
If still not working, I would recomend contacting AT&T to verify there is not an issue with your account, or with EDGE connectivity in your area.
Hope this helps,
Nathan C.

Web browsers not loading webpages

Overnight, a couple of days ago, my web browsers (Safari and Chrome) both stopped loading webpages. When I click on a link, I get a blank page. But when I am logged as a guest or browse through Vmware's windows I can still browse normally. Thanks for helping to fix this.

Thank you Carolyn,
I've got Sophos installed from long time ago. That's the only antivirus that is installed.
Checking in firewall settings didn't help I think, cause even after desactivating the firewall temporaly didn't fix the issue in both web browsers.
This issue is not discussed in Mac malware guide.
Another detail, is that some web content will load like this discussion group or google search. But If I click on any item from google search, the page won't load.

Web sites not loading with firefox, but are loading with safari

HELP Firefox tech support needed
Have:
Mac OS X 10.4.11
Hughes Net Satellite
Since last firefox last update web site or pages from
AOL mail account are not loading, they are
coming up blank.
I do surveys and I am losing points
HELP
When I use Safari, AOL Mail the same web site loads up fine
Firefox worked great until that last update
[email protected]

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Error_loading_websites
*http://kb.mozillazine.org/Websites_look_wrong

Firefox web pages not loading properly

For the past few months I have been having problems with Firefox not loading some websites correctly. I have tried all the suggestions I have found when I Google the issue. I have created a new profile several times, I have constantly cleared my cache and cookies, I have uninstalled several times, and start in safe mode. All of these are just temporary fixes and the problem comes back in several hours to a day later. I can reload the web page buy holding down the sift button and then the pages load correctly. This is really starting to get frustrating and I'm seriously considering switching to IE9 or Opera, I only have the problem with Firefox. Can anyone help me?

This problem of Firefox occasionally failing to style pages, and being able to fix it for a while when you reload the page bypassing cached files (e.g., Ctrl+Shift+r), has been reported in several threads.
One possible cause is a corrupted cache. If you exit Firefox and rename its cache folder, Firefox should re-create a fresh cache. I have to research the steps for this if you want to try it.
Another potential culprit is an external program that removes files from the cache in a way that Firefox does not detect, so Firefox fails to re-request those files until you reload bypassing cache. Samsung's Support Center software (typically on newer systems) has been identified as one program that causes this problem, but there may be others.

Profile Manager Web Interface Not Loading

I set up a Mac mini with 10.9 and Server 3.1.2 to be our MDM server. After the initial configuration the https://<servername>/profilemanager and /mydevices web interfaces work just fine. I'm able to enroll five test OSX and iOS devices. Then I come in the next day and the /profilemanager web interface is unreachable. The /mydevices web interface still works though.
I tried reinstalling 10.9 and server and setting up from scratch and the problem repeats itself the next day. According to this thread deleting Server.app and reinstalling is one solution, but that did not work. I also tried resetting the Profile Manager, but that did not solve this issue either.
When trying to load /profilemanager on the server, a MacBook, and iPad, Safari will just hang when loading the page. The title bar changes to "Admin," the blue status bar hangs, and the page does not load.
This one is baffling. Any suggestions as to what to do would be most appreciated.

xcscredd(1156) deny file-read-metadata /Library/Server/ProfileManager
Process:         xcscredd [1156]
Path:            /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
Load Address:    0x10a244000
Identifier:      com.apple.XCSCredentialServer
Version:         1 (1.0)
Build Info:      255-XCSCredentialServer~32000000000000
Code Type:       x86_64 (Native)
Parent Process: launchd [1]
Date/Time:       2014-05-21 16:46:38.051 -0500
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 8
Thread 0:
0   libsystem_kernel.dylib                  0x00007fff965a20aa __getattrlist + 10
1   Security                                0x00007fff8c81f9de ___ZN8Security15cached_realpathEPKcPc_block_invoke_2 + 260
2   libdispatch.dylib                       0x00007fff8c95a28d _dispatch_client_callout + 8
3   libdispatch.dylib                       0x00007fff8c95b146 _dispatch_barrier_sync_f_invoke + 39
4   Security                                0x00007fff8c81f864 Security::cached_realpath(char const*, char*) + 148
5   Security                                0x00007fff8c676529 Security::DbName::CanonicalizeName() + 209
6   Security                                0x00007fff8c676418 Security::DbName::DbName(char const*, cssm_net_address const*) + 144
7   Security                                0x00007fff8c68292c Security::DLDbIdentifier::DLDbIdentifier(cssm_subservice_uid const&, char const*, cssm_net_address const*) + 100
8   Security                                0x00007fff8c6c53a4 Security::NameValueDictionary::MakeDLDbIdentifierFromNameValueDictionary(Securi ty::NameValueDictionary const&) + 206
9   Security                                0x00007fff8c6c4e82 Security::KeychainCore::CCallbackMgr::consume(unsigned int, unsigned int, Security::CssmData const&) + 192
10 Security                                0x00007fff8c7f679b Security::SecurityServer::NotificationPort::ReceiveImplementation(unsigned char*, unsigned int, Security::UnavailableReason) + 189
11 Security                                0x00007fff8c7f686b ___ZN8Security14SecurityServer16NotificationPort7receiveERKNS_12MachPlusPlus7Me ssageE_block_invoke + 21
12 Security                                0x00007fff8c7f6839 Security::SecurityServer::NotificationPort::HandleRunLoopTimer(__CFRunLoopTimer *, void*) + 19
13 CoreFoundation                          0x00007fff9127e494 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
14 CoreFoundation                          0x00007fff9127dfcf __CFRunLoopDoTimer + 1151
15 CoreFoundation                          0x00007fff912ef5aa __CFRunLoopDoTimers + 298
16 CoreFoundation                          0x00007fff91239755 __CFRunLoopRun + 1525
17 CoreFoundation                          0x00007fff91238f25 CFRunLoopRunSpecific + 309
18 Foundation                              0x00007fff908cfadc -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
19 Foundation                              0x00007fff9091810b -[NSRunLoop(NSRunLoop) runUntilDate:] + 78
20 xcscredd                                0x000000010a245e6f
21 libdyld.dylib                           0x00007fff8c9585fd start + 1
Binary Images:
       0x10a244000 -        0x10a256fff com.apple.XCSCredentialServer (1.0 - 1) <75a88431-46dc-35fc-8350-f97c59b411df> /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
    0x7fff8c670000 -     0x7fff8c8caffd com.apple.security (7.0 - 55471.14.4) <1d5da20e-db48-3e1d-9bf5-baa694192b25> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff8c955000 -     0x7fff8c958ff7 libdyld.dylib (239.4) <7c9ec3b7-dde3-33ff-953f-4067c743951d> /usr/lib/system/libdyld.dylib
    0x7fff8c959000 -     0x7fff8c973fff libdispatch.dylib (339.92.1) <c4e4a18d-3c3b-3c9c-8709-a4270d998de7> /usr/lib/system/libdispatch.dylib
    0x7fff90867000 -     0x7fff90b65fff com.apple.Foundation (6.9 - 1056.13) <2ee9ab07-3ea0-37d3-b407-4a520f2cb497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff911c9000 -     0x7fff913aefff com.apple.CoreFoundation (6.9 - 855.16) <a63e680e-e4b2-368b-8564-9dbe0d8ddb91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff9658d000 -     0x7fff965a9ff7 libsystem_kernel.dylib (2422.100.13) <498aebd7-4194-3cf2-aa16-d5d03ffbd8c0> /usr/lib/system/libsystem_kernel.dylib

Cisco 831 CRWS (web utility) not loading

Similar Messages

Maybe you are looking for