Cisco ACE Action Rewrite

Hi,
Can anybody help me to know the use of "action rewrite" command:
policy-map type loadbalance first-match XXXXX
class class-default
serverfarm YYYYYYY
action REWRITE
Regards,
Thiyagu

Hi Thiyagu,
That command is used to modify, rewrite or insert an HTTP header in the request or response.
More details here;
http://www.cisco.com/en/US/customer/docs/interfaces_modules/services_modules/ace/vA5_1_0/command/reference/actnlist.html
Cesar R
ANS Team

Similar Messages

Cisco ACE backend communication

We are performing SSL overloading in Cisco ACE 4710..
443 from client to load balancer then 80 on the backend.. which works fine, however when I change the backend to 8080 I get to the initial screen but everything after breaks,..
It seems to be something with 443 as if I configure the front end to talk port 81 and backend 8080 all works, as soon as the front end is changed to 443 I get to the first page then everything after breaks

Hi Networker,
Kindly use the following command:
ssl url rewrite location expression [sslport number1] [clearport number2]
As per in your case:
CLIENT -----> ACE = port 443 = sslport
ACE --------> Server = port 8080=clearport
Suppose you are specifying SSL URL rewrite for the URL www.cisco.com or www.cisco.net using the default SSL port of 443 and a clear port of 8080,
Then enter:
host1/Admin(config-actlist-mod)# ssl url rewrite location www\.cisco\.* sslport 443 clearport 8080
In the above example, the ACE attempts to perform the following tasks:
1. Match all HTTP redirects to http://www.cisco.com:8080 or http://www.cisco.net:8080
2. Rewrite the HTTP redirects as https://www.cisco.com:443 or https://www.cisco.net:443
3. Forward the HTTP redirects to the client
After you enter the ssl url rewrite command, associate the action list with a Layer 3 and Layer 4 policy map.
Check the URL for your reference:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/command/reference/actnlist.html#wp1041777http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_1_0/command/reference/actnlist.html#wp1050875
HTH
Sachin Garg

Cisco ACE 4710 - Health Monitoring for Real Servers

Hi,
I have setup the following health probe to check for the existence of a specific web page. My intention is that when the web page is removed, the health check fails and the rserver status changes to 'out of service'. Unfortunately, when I remove the web page, I see the health check fail, and the rserver state change to 'PROBE-FAILED', however the rserver does not go 'out of service' and continues to respond to requests.
Can anyone see where I'am going wrong?
Health check probe config
probe http live_http_int
interval 15
passdetect interval 60
request method get url /loadbalancer/internal.html
expect status 199 201
open 10
RSERVER config
rserver host Server1
description Server1
ip address 10.10.10.1
conn-limit max 4000000 min 4000000
probe live_http_int
inservice
rserver host Server2
ip address 10.10.10.2
conn-limit max 4000000 min 4000000
probe live_http_int
inservice

Hi syannetwork,
I think you have to "force" the failed server to close the connection when it has failed. Otherwise it will still serve the available HTML pages.
Have a look at the "Configuring the ACE Action when a Server Fails" in the "Cisco Application Control Engine Module Server Load-Balancing Configuration Guide" and let me know if the following command helped:
conf t
serverfarm host ServerFarm
failaction purge
Have a good WE.
Cheers
LPL

Cisco ACE - Exempt HTTP URL from SSL Offloading

Hi,
I have a cisco ACE module A2 (3.6). I am offloading url www.abc.com on cisco ACE. HTTP redirection to https is working & over https I am able to browse website perfectly. real servers are redirecting some pages over http. Due to page redirection from webserver I have to exempt one URL (http://www.abc.com/modules/docs/abc.aspx) from ssl offloading. It is possible or as a work around i have to rewrite complete url www.abc.com as ssl port.
Your inputs highly appreciated.
Regards,

Hi Masif,
In case you have not gotten assistance with this one, you just need to specify the specific URL and match it on top of the loadbalance policy that is already doing the redirection.
class-map type http loadbalance match-any No-Redirect
2 match http url /docs/abc.aspx
policy-map type loadbalance first-match ABC
class No-Redirect
serverfarm HTTP-Servers
class class-default
serverfarm Redirect
Hope this helps.
Pablo

Need help to Configure Cisco ACE 4710 Cluster Deployment

Dear Experts,
I'm newbie for Cisco ACE 4710, and still I'm in learning stage. Meanwhile I got chance at my work place to deploy a Cisco ACE 4710 cluster which should load balance the traffic between two Application Servers based on HTTP and HTTPS traffic. So I was looking for good deployment guide in Cisco SBA knowledge base then finall found this guide.
http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_DC_AdvancedServer-LoadBalancingDeploymentGuide-Feb2013.pdf
This guide totally fine with my required deployment model. I have same deployment environment as this guide contains with ACE cluster that connects to two Cisco 3750X (Stack) switches. But I have some confusion places in this guide
This guide follow the "One-armed mode" as a deployment method. But when I go through it further I have noticed that they have configured server VLAN as a 10.4.49.0/24 (all servers reside in it) and Client side VIP also in same VLAN which is 10.4.49.100/24 (even NAT pool also).
My confusion is, as I have learned about Cisco ACE 4710 one-armed mode deployment method, it should has two VLAN segments, one for Client side which client request come and hit the VIP and then second one for Server side. which means besically two VLANs. So please be kind enough to go through above document then tell me where is wrong, what shoud I need to do for the best. Please this is an urgent, so need your help quickly.
Thanks....!
-Amal-

Dear Kanwal,
I need quick help for you. Following are the Application LB requirements which I received from my clinet side.
Following detail required for configuring Oracle EBS Apps tier on HA:
LBR IP and Name required to configure EBS APPS Tier (i.e, ap1ebs & ap2ebs nodes)
Suggested IP and Name for LBR:
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm detail for LBR Setup
Following detail will be use for configuring the LBR:
LBR IP and Name :
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm Detail for LBR setup:
Server 1 (EBS App1 Node, ap1ebs):
IP : 172.25.45.19
Server Name: ap1ebs.xxxx.lk [ap1ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Server 2 (EBS App2 Node, ap2ebs):
IP : 172.25.45.20
Server Name: ap2ebs.xxxx.lk [ap2ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Since my client needs to access URL ebiz.xxxx.lk which should be resolved by IP 172.25.45.21 (virtual IP) via http (80) before they deploy the app on the two servers I just ran web service on both servers (Linux) and was trying to access http://172.25.45.21 it was working fine and gave me index.html page. Now after my client has deployed the application then when he tries to access the page http://172.25.45.21 he cannot see his main login page. But still my testing web servers are there on both servers when I type http://172.25.45.21 it will get index.html page, but not my client web login page. What can I do for this ?
Following are my latest config :
probe http Get-Method
description Check to url access /OA_HTML/OAInfo.jsp
interval 10
faildetect 2
passdetect interval 30
request method get url /OA_HTML/OAInfo.jsp
expect status 200 200
probe udp http-8000-iRDMI
description IRDMI (HTTP - 8000)
port 8000
probe http http-probe
description HTTP Probes
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
request method get url /index.html
expect status 200 200
probe https https-probe
description HTTPS traffic
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
ssl version all
request method get url /index.html
probe icmp icmp-probe
description ICMP PROBE FOR TO CHECK ICMP SERVICE
rserver host ebsapp1
description ebsapp1.xxxx.lk
ip address 172.25.45.19
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
rserver host ebsapp2
description ebsapp2.xxxx.lk
ip address 172.25.45.20
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
serverfarm host ebsppsvrfarm
description ebsapp server farm
failaction purge
predictor response app-req-to-resp samples 4
probe http-probe
probe icmp-probe
inband-health check log 5 reset 500
retcode 404 404 check log 1 reset 3
rserver ebsapp1 80
    conn-limit max 4000000 min 4000000
    probe icmp-probe
    inservice
rserver ebsapp2 80
    conn-limit max 4000000 min 4000000
    probe icmp-probe
    inservice
sticky http-cookie jsessionid HTTP-COOKIE
cookie insert browser-expire
replicate sticky
serverfarm ebsppsvrfarm
class-map type http loadbalance match-any default-compression-exclusion-mime-type
description DM generated classmap for default LB compression exclusion mime types.
2 match http url .*gif
3 match http url .*css
4 match http url .*js
5 match http url .*class
6 match http url .*jar
7 match http url .*cab
8 match http url .*txt
9 match http url .*ps
10 match http url .*vbs
11 match http url .*xsl
12 match http url .*xml
13 match http url .*pdf
14 match http url .*swf
15 match http url .*jpg
16 match http url .*jpeg
17 match http url .*jpe
18 match http url .*png
class-map match-all ebsapp-vip
2 match virtual-address 172.25.45.21 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match ebsapp-vip-l7slb
class default-compression-exclusion-mime-type
    serverfarm ebsppsvrfarm
class class-default
    compress default-method deflate
    sticky-serverfarm HTTP-COOKIE
policy-map multi-match int455
class ebsapp-vip
    loadbalance vip inservice
    loadbalance policy ebsapp-vip-l7slb
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 455
interface vlan 455
ip address 172.25.45.36 255.255.255.0
peer ip address 172.25.45.35 255.255.255.0
access-group input ALL
nat-pool 1 172.25.45.22 172.25.45.22 netmask 255.255.255.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input int455
no shutdown
ft interface vlan 999
ip address 10.1.1.1 255.255.255.0
peer ip address 10.1.1.2 255.255.255.0
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 999
ft group 1
peer 1
no preempt
priority 110
associate-context Admin
inservice
ip route 0.0.0.0 0.0.0.0 172.25.45.1
Hope you will reply me soon
Thanks....!
-Amal-

Urgent!!! Cisco ACE and asymetric routing assistance needed

I am wondering if someone can give me pointers on the cisco ACE
and asymetric routes. I've attached the diagram:
-Cisco IOS IP address is 192.168.15.4/24 and 4.1.1.4/24
-Firewall External interface is 192.168.15.1/24,
-Firewall Internal interface is 192.168.192.1/24,
-F5_BigIP External interface is 192.168.192.4/24,
-F5_BigIP Internal interface is 192.168.196.1/24 and 192.168.197.1/24,
-host_y has IP addresses of 192.168.196.10/24 and 192.168.197.10/24,
-Checkpoint has static route for 192.168.196.0/24 and 192.168.197.0/24
pointing to the F5_BigIP,
-host_y is dual-home to both VLAN_A and VLAN_B with the default
gateway on host_y pointing to VLAN_A which is 192.168.196.1,
-host_x CAN ssh/telnet/http/https to both of host_y IP addresses
of 192.168.196.10 and 192.168.197.10.
In other words, from host_x, when I try to connect to host_y
via IP address of 192.168.197.10, the traffics will go through VLAN_B
but the return traffics will go through VLAN_A. Everything
is working perfectly for me so far.
Now customer just replaces the F5_BigIP with Cisco ACE. Now,
I could not get it to work with Asymetric route with Cisco ACE. In
other words, from host_x, I can no longer ssh or telnet to host_y
via IP address of 192.168.197.10.
Anyone knows how to get asymetric route to work on Cisco ACE?
Thanks in advance.

That won't work because ACE uses the vlan id to distinguish between flows.
So when the response comes back on a different vlan, ACE can't find the flow it belongs to and it drops it.
Even if we could force it to accept the packet, ACE would then try to create a new flow for this packet and it will collide with the flow already existing on the frontend.
You would need to force your host to respond on the same vlan the traffic came in.
This could be done with client nat on ACE using different nat pool.
Gilles.

Cisco ACE loadbalancing matching more than one header in L7 class map

Dear All,
This is regarding Cisco ACE loadbalancing matching more than one header in L7 class map. I have a small setup with ACE 30 module in Cisco6500. I have got three webservers. Presently I have following configuration where I am mathing one url header.
class-map type http loadbalance match-all L7_WEB_HEADER_MATCH
description MATCH THE HOST HEADER OF HTTP REQUEST
2 match http header Host header-value ".*abhisar.com*"
So for above configuration, when traffic is coming for abhisar.com, it is working fine.
Now, I have following headers and DNS entry is pointing to same virtual IP for all http url header same as abhisar.com
abhisarindia.com
indiaabhi.com
So new configuration will be
class-map type http loadbalance match-any L7_WEB_HEADER_MATCH
description MATCH THE HOST HEADER OF HTTP REQUEST
2 match http header Host header-value ".*abhisar.com*"
4 match http header Host header-value ".*abhisarindia.com*"
6 match http header Host header-value ".*indiaabhi.com*"
So just want to confirm if this is fine.
Thank You,
Abhisar.

Dear Rajesh,
Thank you for reply. I will let you know once I carry out this activity.
Thank You,
Abhisar.

Slow connection in one server if accessing through Cisco ACE

Hi,
Good day, Can someone help me on my problem? I have 3 servers, server1, server2 and server3. When one pc accessing the server 3 application via Cisco ACE, it experienced a slow connection but when direct access without Cisco Ace, it's fast. The connection of this PC through cisco ace and direct access have no issue.
What need to do in my configuration? Below is my configuration
logging enable
logging timestamp
logging trap 7
logging buffered 7
logging monitor 7
logging host 167.81.126.5 udp/514
logging host 137.55.152.147 udp/514
resource-class SG_01
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 10.00 maximum equal-to-min
boot system image:c4710ace-mz.A3_2_0.bin
login timeout 30
peer hostname singapore-ace2
hostname singapore-ace1
interface gigabitEthernet 1/1
channel-group 14
no shutdown
interface gigabitEthernet 1/2
channel-group 14
no shutdown
interface gigabitEthernet 1/3
channel-group 14
no shutdown
interface gigabitEthernet 1/4
channel-group 14
no shutdown
interface port-channel 14
description ISOLAN-ACE-TRUNK
ft-port vlan 99
switchport trunk native vlan 1
switchport trunk allowed vlan 12,14,112
no shutdown
clock timezone SGT 8 0
ntp server 137.55.152.1
context Admin
member SG_01
access-list ALL line 8 extended permit ip any any
access-list ALL line 9 extended permit icmp any any
ip domain-name ysn.psg.philips.com
probe http singapore_01
description This probe used to monitor application url-app-script
interval 5
passdetect interval 5
request method get url /insiteserverstatus/insiteserverstatus.aspx
expect status 200 200
open 1
probe http singapore_02
description This probe used to monitor IIS-login-page
interval 5
passdetect interval 5
request method get url /InSiteLumiledsApplication/
expect status 200 200
open 1
probe icmp uplink
description This probe used in conjunction with ft track host
interval 2
faildetect 2
passdetect interval 3
parameter-map type connection PARAM_L4STICKY-IP
exceed-mss allow
rserver host sggysnysn1ms013
ip address 137.55.152.135
inservice
rserver host sggysnysn1ms014
ip address 137.55.152.136
inservice
rserver host sggysnysn1ms018
ip address 137.55.152.145
inservice
serverfarm host PLI9058
probe singapore_01
probe singapore_02
rserver sggysnysn1ms013
    inservice
rserver sggysnysn1ms014
    inservice
rserver sggysnysn1ms018
    inservice
sticky ip-netmask 255.255.255.255 address both SG_GROUP_01
timeout 720
replicate sticky
serverfarm PLI9058
class-map type management match-any HTTPS-ALLOW_CLASS
class-map match-all L4STICKY-IP_141:ANY_CLASS
2 match virtual-address 137.55.152.141 any
class-map type http loadbalance match-any NO_MS018
50 match source-address 137.55.155.31 255.255.254.0
class-map type management match-any SSH-ALLOW_CLASS
2 match protocol ssh source-address 167.81.124.0 255.255.255.192
3 match protocol ssh source-address 167.81.126.0 255.255.255.192
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match L7PLBSF_STICKY-NETMASK_POLICY
class class-default
    sticky-serverfarm SG_GROUP_01
    insert-http X-Forwarded-For header-value "%is"
policy-map multi-match PLI9058-VIPs_POLICY
class L4STICKY-IP_141:ANY_CLASS
    loadbalance vip inservice
    loadbalance policy L7PLBSF_STICKY-NETMASK_POLICY
    loadbalance vip icmp-reply
    connection advanced-options PARAM_L4STICKY-IP
interface vlan 12
description Client-side vlan
bridge-group 1
no normalization
mac-sticky enable
access-group input ALL
access-group output ALL
service-policy input PLI9058-VIPs_POLICY
no shutdown
interface vlan 14
ip address 137.55.152.236 255.255.255.248
peer ip address 137.55.152.237 255.255.255.248
service-policy input remote_mgmt_allow_policy
no shutdown
interface vlan 112
description Server-side vlan
bridge-group 1
no normalization
access-group input ALL
access-group output ALL
nat-pool 1 137.55.152.141 137.55.152.141 netmask 255.255.255.192 pat
no shutdown
interface bvi 1
ip address 137.55.152.189 255.255.255.192
alias 137.55.152.188 255.255.255.192
peer ip address 137.55.152.190 255.255.255.192
description Bridge-Group 1 Virtual Interface
no shutdown
ft interface vlan 99
ip address 192.168.1.1 255.255.255.252
peer ip address 192.168.1.2 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 100
heartbeat count 10
ft-interface vlan 99
ft group 1
peer 1
priority 150
peer priority 50
associate-context Admin
inservice
ft track host test1
track-host 137.55.152.234
peer track-host 137.55.152.235
peer probe uplink priority 50
probe uplink priority 50
ip route 0.0.0.0 0.0.0.0 137.55.152.233

Hi Earsdale,
All the three servers are using the same configuration, so, I'm afraid it's not possible to give you a simple answer. You will need more troubleshooting.
I would recommend you to start by checking the differences between the servers because one of those differences is certainly causing the failure.
Also, it would be helpful to get traffic captures on the TenGig interface of the ACE to compare the behavior of the connection when going to the different servers, as well as the differences when being load-balanced vs accessing the server directly.
If you need help with this troubleshooting, you can always open a TAC service request
Regards
Daniel

Cisco ACE A2(2.0) - webhost-redirection

Hello,
We are currently running the version ACE A2(2.0), pretty old one on Cisco ACE Module. We have applied webhost-redirection https://%h%p 302 but it doesn't seem to take effect and always go back to the host header value.
Is it a bug or a missing feature within A2(2.0) build ?
Please assist.
Thanks.

Also is there a way to check in ACE logs as to what are the redirects taking place to identify any issues etc.
Thanks.

Cisco ACE dynamic rerouting (dc to dc failover)

Good day,
We currtenly have two dc's (site A and site B)
We are using netapps as our SAN and we ar booting our server directly from the SAN
SAN A and SAN B are insync and the network between site A and site B is routed.
The challange:
When a server is failover from site A to B it still has an ip adress that is routed to site A.(due to the SAN boot)
We have a cold - hot design in regards to the servers (so no clustering of ESX)
I have been reading about cisoc ACE and i think that it would solve the challange by dynamily updateing OSPF.
Can any one please confirm that cisco ACE will solve this challlange (whitout the need for any other additional hardware)
Thanks a lot,
Regards,
joli-coeur Wouter
(CCIE Security 23078)

It's more related to disaster recovery planning than ACE configuration
The cleanest way is to use L2 extension.
Otherwise you can use VMWare SRM to change the ip addresses of your VMs, or run an OSPF process and replicate all the subnets and put it in the "shutdown state" (or announcing it with a very high cost, proximity routing will do the rest - ACE module can do this for the VIPs with OSPF route health injection, ACE4710 doesn't support RHI but on the upstream router you can define an IP SLA probe and perform conditionnal redistribution), or use a dummy VRF with all your subnets and when enabling DRP, perform route leaking... use NAT with DNS-based failover etc...
There is no generic answer to your problem.

How can ftp service on non-standard port be load balanced using Cisco ACE.

How can ftp service on non-standard port be load balanced using Cisco ACE.For example ftp service required on tcp 2000 port

Hi Samarjit,
you can do this by specifying the port number in the class map that you create . Please find the below mentioend config guide where you can specify the tcp/udp port , range or ports or even the wild card to match the port.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/administration/guide/mapolcy.html#wp1318826
Regards
Abijith

Logging user commands in Cisco ACE appliance

Good afternoon gentlemen
I need to configure the same as shown below in Cisco ACE Appliance. The requirement is logging all user access login (whether failed or succeeded) and also logging all commands that users issue.
#IOS commands
no logging console
logging buffered 307200 informational
service timestamps log datetime localtime show-timezone
logging trap debugging
login on-failure log
login on-success log
archive
   log config
      logging enable
      logging size 500
      hidekeys
      notify syslog contenttype plaintext
If you guys have an idea please answear
Regards
Christian

Hello Arun,
we saw before the message you report, it's probably a symptom of:
CSCtx03563
or
CSCue38032
I would suggest opening a TAC case to get this properly investigated.
Kind Regards,
Francesco

Monitoring the Cisco ACE module with SNMP

We use 2 redundant Cisco ACE loadbalancer in our datacenter
The models are ACE20-MOD-K9 with software A2(2.0)
Does anybod know how to monitor the environment (cpu, memory) of such a module with snmp?
We were not able to find an applicable MIB for that module.
The CISCO-PROCESS-MIB.oid (ftp://ftp.cisco.com/pub/mibs/oid/CISCO-PROCESS-MIB.oid) seems not to reflect the correct oid's.
What are the correct oid's for cpu and memory?
Where can I find a detailed documentation for snmp-monitoring the cisco ace module?
thanks

Hi Patrik,
to monitor the ACE I use these two MIB's:
ftp://ftp.cisco.com/pub/mibs/v2/CISCO-SLB-MIB.my
ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENHANCED-SLB-MIB.my
Example for CPU:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
cpmCPUTotalEntry 1.3.6.1.4.1.9.9.109.1.1.1.1
The resource usage and other interesting things you will find with a MIB browser.
Achim

Cisco ACE compatiblity with F5 GTM

Hi,
We have cisco ace 30 modules installed in cisco 6500 switches. For application availability purpose from the internet, we need to have some global site selector/3rd party devices with similar feature set that of cisco gss.
My question is: whether cisco ace is compatible to ge tintegrated with other 3rd party devices like F5 GTM?
kindly sugegst..

Good afternoon,
I'm not familiar with the GTM solution, but, as long as it's DNS-based like the GSS, it should be perfectly compatible. Bear in mind that the ACE is not aware on how clients are getting the IP address, it just replies to whatever connections it gets.
Regards
Daniel

Cisco ACE Inspecting RTSP Wowza Service?

Did somebody knows if Cisco ACE in some of their HW and SW versions support Inspect for RTSP of Wowza Service running in the serverfarm? We intend to setup the service in routing mode and without a Firewall or a Web APP Firewall avoiding BW consumption in ASA/FWSM.

Hi Samuel,
ACE does support RTSP inspection but specific server support is not mentioned. Please see more details about RTSP inspection at below:
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/security/guide/securgd/appinsp.html#wp1318637
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Cisco ACE Action Rewrite

Similar Messages

Maybe you are looking for