Cisco ACE can rserver use it's own VIP address ?

we've configured a serverfarm with a real server and a VIP.
The serverfarm can be reached and is functioning well.
Now we want the rserver to be able to reach it's own VIP address.
This is needed because the rserver has multiple websites which need each other
and we want to have load balancing.
Is this a supported configuration ?
regards,
Sebastian

you can simply add a new policy to match the servers ip addresses and then configure nat.
ie:
class-map match-all servers
2 match source-address 192.168.30.48 255.255.255.255
policy-map multi-match client-nat
class servers
nat dynamic 1 vlan 30
interface vlan 20
ip address 192.168.20.121 255.255.255.0
alias 192.168.20.124 255.255.255.0
peer ip address 192.168.20.123 255.255.255.0
no normalization
mac-sticky enable
access-group input PERMIT-ANY
service-policy input ALLOW-ALL
service-policy input client-nat
service-policy input SLB1
no shutdown
interface vlan 30
bridge-group 30
no normalization
mac-sticky enable
access-group input PERMIT-ANY
nat-pool 1 10.10.20.1 10.10.20.100 netmask 255.255.255.0
In this case I nat the to an address in 10.10.20.0/24 subnet and I have a static route on the servers pointing this subnet to ACE.
You could also use a free ip from the same server subnet and no static route would be required.
Also if ACE is already the default gateway for the servers, no specific static route is required.
Also, in this example, I'm not really nating a server. But the idea is the same. The only difference is that in your case, the outgoing interface will be the same as the incoming interface. Me I have everything in vlan 20 and vlan 30. You will have everything in vlan X and only vlan X.
Gilles.

Similar Messages

Can I use MainStage without owning Logic?

I use Pro Tools and Reaper in the studio, so I won't to jump ship to Logic; simply b/c however nifty it is, it's not worth the steep time-consuming learning curve. However, for live performance as a keyboardist, I'm looking for a Mac-based VST host to be controlled by a USB/MIDI keyboard controller, and am wondering if MainStage might be the way to go. The price is so cheap, how could I go wrong? But no matter where I search, I don't get a clear answer to these questions:
Can I use MainStage without owning Logic?
For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song (e.g., custom samples in Kontakt, Wurly, B-3, piano, glockenspiel, whatever) spread out in various discrete layers across a keyboard. Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
Thanks for any insight,
Peter

SASPro wrote:
Can I use MainStage without owning Logic?
If you buy it from the AppStore, YES
SASPro wrote:
For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
All the instrument and FX plugs are included, and a (massive) additional free download within the Mainstage application will get you all the extra content.
SASPro wrote:
This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song
Caution: Logic/Mainstage will only work with Audio Unit (AU) plugins, NOT VST. Most 3rd party plugs are available as AU plugs, but you need to make sure you have installed them.
SASPro wrote:
Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
Yes, and memory/CPU issues not withstanding, Mainstage generally works extremely well for this.
CCT

Can I use my fully owned CS2 on my iMac OX 10.9.5 as I paid over $1850.00 some 7 years ago for it and have been told by "Experts" that I can reinstall from my original software disks (which I have including all passwords etc required. Please assist as whe

Can I use my fully owned CS2 on my iMac OX 10.9.5 as I paid over $1850.00 some 7 years ago for it and have been told by "Experts" that I can reinstall from my original software disks (which I have including all passwords etc required. Please assist as when my old iMac died I find I could not get my CS2 to work. Very frustrating for some one my age who cannot afford a new InDesign. Thomas Bain

CS2 was created for the Power PC processor which your old iMac obviously was.
Your new Mac with OSX 10.9.5 is an Intel Mac and no longer runs Power PC applications.
For several years after the transition from Power PC to Intel Apple had provided an emulator called Rosetta that allowed Intel Macs to run Power PC applications.
However, the last version of the Mac OS that had Rosetta was OSX 10.6.8 Snow Leopard.
Even if you could find a copy of OSX 10.6.8 it would be highly unlikely that it would ever install on a newer Mac due to different firmware versions.
Your only hope is to buy an older used Mac that can run OS 10.6.8 Snow Leopard or earlier.
Sorry, but that ship has sailed.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

I have just connect my iPhone to iCloude and it is showing my sons address in the setting any change i can change that to my own Email address.

I have just connect my iPhone to iCloude and it is showing my sons address in the setting any change i can change that to my own Email address.

Welcome to the Apple Community.
You need to create and use your own iCloud account.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

Can I use my existing E-mail address to retrieve my password reset through security questions

Can I use my existing E-mail address to retrieve my password reset through security questions instead of through E-mail. When I try retrieving my new Apple password through reset through security questions? On the Apple id, it will not allow me to do so becasue I forgot my security answers to the question. I'm naming one or two of the wrong vechiles which is what the questions ask me for for security questions.
For icloud do you reccommend that I keep that same E-mail address or create a new one for my iCloud mail aside from my G-mail address name?
I asked support community for the very first time to reset my security questions and it wanted me to create a new user name for iCloud when I already have *****l for my original Apple id.
<Email Edited By Host>

TheresaEW,
I’d recommend contacting Apple directly to resolve your security question issue.

Can you use more than one email address on one account as to enable two or three devices to use imsg????

Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????

If I read your question right, yes.
My pad has two e mail addresses, and my phone has a phone number as well as a e mail address. For each device you can add additional 'receive at' addresses in settings.
Note, when you add a new address, apple will send an e mail to that new address that you need to respond to, to show that it is a valid address. So look in the inbox of that e mail account for the verification e mail. Note further, some spam filters think that the verification e mail might be spam, so if it does not show up in your in box, look in any spam file you might have.
in my case, the verification e mail came within a few minutes of declaring the new address.
The multiple address are useful if you have more than one device under your apple id, and want to be able to send stuff to that particular device.

Can we use more than one DNS address

Can I use more than one DNS address in the settings of my mini iPad. One for local and other for other country. If so, how can I enter them in DNS column? Thanks!

Can I use more than one DNS address in the settings of my mini iPad. One for local and other for other country. If so, how can I enter them in DNS column? Thanks!

Why can someone use same icloud e-mail address as mine?

Why can someone use same icloud e-mail address as mine?
I Have found that the new facebook account has been set up in someone's name using my iclound e-mail.

Do a backup.
Try System Preferences/iCloud and sign out. Then sign in with your new Apple ID.

I have an itunes account with 3 ipods can we each have our own email address

can we have our own email address if we share the 1 itunes account???

There can be only one emailladdress accociate with an Apple/iTunes ID. However, after you initiall set up the Messages and FaceTime apps with the Apple/iTunes ID you can add another email amessaging/calling addresses and delete the Apple/iTunes email address.

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

How can I use my old MobileMe email address if I did not migrate to icloud by the deadline?

I had a mobile me account that I did not migrate to icloud. Now when I try and set up an icloud account using the old mobileme email address, it says that address is already in use. I then try and access it but the password doesn't work and it says mobileme is closed. When I try and reset the password, it says an email has been sent to the email on file...which is an old mobileme address that I cannot access.
How can I get this email address set up in icloud?

Nice idea - I tried it but it doesn't seem to work (at least not for me).
So here are the details in case, you can spot something more I could do....
When MobileMe was live
MobileMe ID was [email protected]
AppleID (to make iTunes purchases) was [email protected]
When iCloud went live (and MM was still alive)
iCloud account was created based upon AppleID - [email protected]
iCloud would not create [email protected] as was already in use (by me)
iCloud would not merge [email protected] as iCloud does not merge
MobileMe migration to iCloud option was not taken
Deleted all data out of MobileMe account (mail, calendar, contacts, gallery)
Deleted MobileMe mail account off of all devices
When MM died
I received notification that I had not migrated my MM account
iCloud was happily working as Contacts/Calendar sharer using my AppleID of [email protected]
Weeks later on Mac running 10.8
System Preference - iCloud, already logged in with AppleID of [email protected]
Then ticked the untick Mail box
Long wait with small grey whirling cog box, stating "Loading". Eventually a BLANK message box with OK which then disappeared on a timeout.
System Preference - Mail... Re-added [email protected] (now picked up as iCloud account)
Mail - Accounts.... Re-added [email protected] BUT got message "Mail can'y connect to the account..."
So tried logging into www.icloud.com (using AppleID of [email protected] where my contacts/calendar now reside). Clicked on Mail icon and received "@me.com Address Needed" message

Can I use Mackeeper to remove duplicate address book entries?

On my MacBook using OS 10.7.2 and iTunes 10.5.1, after syncing with iPad2 and iPod Touch I now have 3 and 4 copies of most Address Book entries ON MY MAC BOOK. Can I use Mackeeper to remove duplicates? No option to remove duplicates ever appeared during the sync process.

I suggest if you have MacKeeper install, that your first move be to uninstall it.
Here is a script to find duplicates in addressbook
http://hints.macworld.com/article.php?story=20060322202753429
Allan

Can't use certain keys in Global Address Search

When trying to run a Global Address Search that starts with a letter that's on the numeric keypad (E, R, T, D, etc.) I cannot get it to search by the letter. E.g., if I press "D" it searches for "4". Pressing the Option (aka Orange) key doesn't toggle it to alpha mode. I can search using letters that aren't on the numeric keypad just fine. And if I my search starts with a letter that's not on the numeric keypad (e.g. "L") I can choose either "D" or "4" as the next letter, e.g., if I press "D" I see "4". If I then press "L" the 4 changes do a "d" and the search shows "dl". But if I erase the "l" the "d" switches back to "4".
Bottom line: I can't choose "D" as the first character in my search. I have to launch Contacts, then search. I'm on WebOS 1.4.
Robert

Hello.
It really doesn't work that way. When you type "D", the phone shows a "4", but it searchs for "D". There is no way to distinguish when you want to make a call by number from when you want to search, so the phone gives you both options.
Try to enter a "Dave Martin" contact in your phone and search him by pressing "DL", "DA" or "MA".
Regards.

Cisco ACE can rserver use it's own VIP address ?

Similar Messages

Maybe you are looking for