CIsco ACS 90 Days Trial
Hello,
I've been looking for the 90 day trial version of the Cisco ACS on Cisco.com. I've been able to find the trial for ACS 3.0 however is there a newer version above 4.0 for Windows available for download. All I could find is patches and upgrades however there is no full software available for download.
Regards,
Imran.
Hi Imran,
If you would like to have full software download for ACS windows, then please open up TAC case and we will publish files for you as only patches are available on cisco website.
Thanks,
Shilpa
Similar Messages
-
Hi,
I'm thinking about downloading the ACS 90-day Trial.
Before I do, however, I have some questions I haven't found the answer for.
a) After the trial period expires, and I decide to buy the ACS, how can I get the definitive license and will I have to reinstall averything on the ACS server again?
b) If I download the full version of the ACS through the Cisco website, how can I pay for the license?
Thanks for your help!OK, in order:
a) ACS for Windows does not have a license. If you decide to buy ACS, you will receive a package with a CD. This is the full production version. All you have to do is to install the new version over the 90-day eval version and you will retain your existing configuration.
b) Because there is no license, you cannot download the production version from Cisco. You will have to either order it online at http://www.cisco.com/en/US/partner/ordering/or13/or8/order_customer_help_how_to_order_listing.html
or contact a sales representative or one of the Cisco partners. -
hello,
i'm unable to find where to download Cisco ACS trial.
Thanks,
Omer ShtiviOk i managed to download the trial.
FYI
You download the full version and after you access throgh https you enter the Cisco Secure ACS License Registration
and downloading the demo license. -
Hello
Did anyone experience problem with Service Selection Rules in Cisco ACS. When I click this tab ( it only works for me in google Chrome), configuration is normally opened. But when I want to edit one of two default rules (rules that match radius and tacacs) nothing happens. If I want to add new rule, popup window in normally opened but I am not able to add any conditions or results. It is just nothing to choose from. I have some attributtues under "customize window". It looks like some gui problems.
I am using
acs/admin# sh application version acs
Cisco ACS VERSION INFORMATION
Version : 5.4.0.46.0a
Internal Build ID : B.221
with trial license. I am running ACS on vmware player (1 GB of RAM and 1 proc).
Thanks in advance
General
Name:
Status:
Enabled Disabled Monitor Only
The Customize button in the lower right area of the policy rules screen controls which policy conditions and results are available here for use in policy rules.
Conditions
ResultsWhen dealing with Cisco ACS and Cisco ISE you have to be very careful with your web browsers. For example there's a major bug when using Cisco ISE 1.1.x and Chrome.
Back to ACS, please refer to the release notes to see the validated web browsers.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/release/notes/acs_54_rn.html#wp222016
I have used ACS and ISE a lot, and we had many problems when using Internet Explorer and Chrome. That's why I prefer Firefox, but even with firefox we had little problems once in a while.
Please rate if this helps -
Hi,
I've red that there are some vulnerabilitied in Cisco ACS.
The advisory is that: cisco-sa-20070105-csacs
I have two installation of CiscoSecure ACS Release 3.3(3) Build 11.
One is ok while the second installation, few days ago, noticed me a crash in CSADmin.
Meanwhile I was trying to revolve this problem, there was a problem with the server's disk so now the server is off.
Anyone could tell me if it is possibile that there is a relationship between crash and the problems in advisory.
Is always recomandable to install the patch in the advisory?
Thanks in advance
AntonioAntonio,
We need to look at the CSAdmin log to see if the service crashed due to the problem mentioned in the advisory. But it is highly unlikely that the disk could have crashed because of any ACS Service.
It is recomended to patch up the vulnerability. You will need to mov eup to 3.3.4 -
Cisco ACS 4.2 1113 Recovery DVD
Good day!
We have CSACSE-1113-k9 Cisco ACS 4.2 1113 appliance. And we need to reimage (restore the appliance to its original state). Could enyone help me with proper link to software.cisco.com image of recovery DVD?
I'm trying to find it, but i cant see recovery dvd:
Downloads Home
Products
Cloud and Systems Management
Security and Identity Management
Cisco Secure Access Control Server Products
Cisco Secure Access Control Server Solution Engine
Cisco Secure Access Control Server Solution Engine 4.2Hi,
AFAIK you do not have the option to download ACS Recovery DVD from cisco.com. You can contact Cisco TAC and they can publish the software for you.
Do rate if Helpful....
Regards,
Kush -
Cisco ACS questions for new deployment
Hi all, I am designing a new Cisco ACS deployment to handle AAA services for all our network devices. I have read the user guides and I understand the different deployment scenario's. However, what i could not find in the user guide, were answers to the questions below...
Number of AAA clients, using command authorisation, that a single ACS server can handle?
Does a Large Add-On license (for more than 500 nodes) need to be purchased for every ACS server, or does one license cover the whole deployment?
How is AAA load-balancing performed? Does each AAA server need to be defined individually on every Network device? Or is there some intelligence build in to the AAA servers so that they can distribute the load themselves? Or can a load balancer be used like you can with Cisco ISE PSN nodes?
Thanks
MarioSupported number of clients depends on License for example
The base license is required for all deployed software instances and for all appliances. The base license enables you to use all ACS functions except license-controlled features, and it enables standard centralized reporting features.
The base license:
Is required for all primary and secondary ACS instances.
Is required for all appliances.
Supports deployments that have a maximum of 500 NADs.
The following are the types of base licenses:
Permanent—Does not have an expiration date. Supports deployments that have a maximum of 500 NADs.
Evaluation—Expires 90 days from the time the license is issued. Supports deployments that have a maximum of 50 NADs. -
[Cisco ACS] Memory Utilization limit
Hello,
We have 2 CSACS 1121 with Cisco ACS 5.2.0.26.10
The primary server manages 20000+ authentications per day.
Its memory utilization increases everyday.
It is now at 83%
Is there a limit?
What will happen when memory utilization reach this limit?
What can we do to purge memory utilization? (reboot, service restart...)
Thanks for your help
Patrickadmin# sh memory
total memory: 1031200 kB
free memory: 16288 kB
cached: 298568 kB
swap-cached: 0 kB
Do you know the minimum free memory amount for safe operations?
· is this ACS running any risks being this abpve?
· Are there any general clean-up commands that can be executed to free up memory without jeopardizing operations on the ACS? -
Which of these licenses have a 120 day Trial-period?
Table 5. Software Packaging and Licensing
License
Chassis Based or Port Based
Part Number
Supported Features and Platforms
Cisco Nexus 5548 FCoE NPV License
Chassis
N5548-FNPV-SSK9
FCoE NPV features supported on Cisco Nexus 5548
Cisco Nexus 5596 FCoE NPV License
Chassis
N5596-FNPV-SSK9
FCoE NPV features supported on Cisco Nexus 5596
Cisco Nexus 5500 Storage Protocols Services License, 8 Ports
Port
N55-8P-SSK9
Fibre Channel and FCoE and FCoE NPV features supported on any 8 ports of Cisco Nexus 5548 and 5596
Cisco Nexus 5500 Storage Protocols Services License, 48 Ports
Port
N55-48P-SSK9
Fibre Channel and FCoE and FCoE NPV features supported on any 48 ports of Cisco Nexus 5548 and 5596
Cisco Nexus 5500 Layer 3 Base Software License
Chassis
N55-BAS1K9
Static routing, RIPv2, OSPFv2, EIGRP stub, HSRP, VRRP, IGMPv2 and v3, PIMv2 (sparse mode), routed ACL; OSPF scalability is limited to 256 dynamically learned routes,
VRF-lite (IP-VPN)
Cisco Nexus 5500 Layer 3 Enterprise Software License
Chassis
N55-LAN1K9
Full EIGRP, OSPF with scalability up to 8000 routes, BGP; maximum routes supported by Layer 3 hardware: 8000 entries; uRPF
Cisco Nexus 5500 VM-FEX Software License
Chassis
N55-VMFEXK9
Cisco Data Center VM-FEX supported on Cisco Nexus 5548 and Cisco Nexus 5596
Cisco Nexus 5548 Enhanced Layer 2 Software License
Chassis
N5548-EL2-SSK9
Cisco FabricPath supported on Cisco Nexus 5548
Cisco Nexus 5596 Enhanced Layer 2 Software License
Chassis
N5596-EL2-SSK9
Cisco FabricPath supported on Cisco Nexus 5596
Cisco DCNM SAN Software License
Chassis
DCNM-SAN-N5K-K9
Cisco DCNM for SAN Advanced Edition for Nexus 5000 Series
Cisco DCNM LAN Software License
Chassis
DCNM-L-NXACCK9
Cisco DCNM for LAN Advanced Edition for Cisco Nexus 3000 and 5000 SeriesHi Andrey,
All of these licenses have 90 day evaluation periods. You can download them from the following link: https://tools.cisco.com/SWIFT/LicensingUI/Quickstart#. Next, click "Get Other Licenses > Demo and Evaluation...". DCNM licenses will be under Network Mgmt Products and N5500 licenses will be under Routers & Switches.
-Eric -
Netscreen firewall authentication by Cisco ACS
Since Netscreen firewall only supports RADIUS authentication, is Cisco ACS server able to support it? If yes, which version and where can I find more info about it?
If it supports RADIUS then ACS should be able to support it.
I belive the latest version of ACS is V6.33, you can download a trial version from this site.
All the information you require should be here:
http://www.cisco.com/en/US/products/sw/secursw/ps2086/index.html
HTH
PJD -
Hi all,
I installed a Pages '08 30-day trial copy one week ago and today I was greeted with the message that my trial period is over (already!). Has this happened to anybody else and does anyone know how to try to fix the trial copy?
Thanks a lot,
Gus, trying to get rid of MS Word.Hello,
You should try to delete the iWork preference files in:
Your user folder/Library/Preferences
and
Your user folder/Library/Preferences/ByHost
Their names are "com.apple.iwork.plist", "com.apple.iwork.keynote.plist", "com.apple.iwork.pages.plist", "com.apple.iwork.numbers.plist", etc.
Regards,
cm752004 -
I installed lightroom 5 with a 30 day trial and it finished.
Yesterday I installed cc and when I open LR5 I need a serial number.
What do I do/how do I get one?
Please help, Thank you.Your photos remain in place, the catalog you have been using will remain. After you install Lightroom from the CC, all you have to do is open your existing catalog and continue right where you left off.
-
Hi, having purchased and installed pages after my 30 day trial had finished I am now unable to save any changes to documents I had created in the trial version. It says I need a serial number, which I never got when I purchased the pages app. Does anyone kno how to rectify this, I would be very grateful for any help as I'm currently writing up my thesis and am now unable
Hi, I had the same problem and I found that you don't need a serial number anymore. Here is what I did:
(1)I went to Applications fodder on my Mac. (You can navigate to the Application folder from 'New Finder Window.')
(2) Deleted Pages (installed as part of the free free trial version) from the Applications Folder. Also deleted 'IWorks' from the Applications folder.
(3) Started AppStore.
(4) Clicked on Purchases.
(5) Clicked on Pages.
(6) Clicked Install.
(4) repeated (5) and (6) for Numbers and Keynote -
HELP URGENT How do I use an activation key to re-activate my 30 day trial ?
I am asking this question on behalf of my sister-in-law who is on dial up in a rural area and recently purchased an iMac with the 30 day trial of i-work. She purchased an activaion key on line but does not know how to re-activate the existing software. She did not receive any e-mail on how to re-activate the existing software on the computer.
What is the process at apple on how someone would re-activate a trial copy of i-work? Does she get an e-mail with the key and instructions on how to use it?
Her children are in the middle of a project that is needed for school and they cannot get back in to print anything.
Need your help ASAP.Welcome to the discussions, Desi.
If Keynote is still on the machine, they should only have to double-click the icon. When the application opens, there should be a button to press to enter the registration number. Some details are here.
http://docs.info.apple.com/article.html?artnum=301608
I haven't had to do this myself, post back if it doesn't work. -
issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login
issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login
Maybe you are looking for
-
This will make me pay for a higher data plan than necessary. Individual device totals add up to 5.5GB data yet the total usage on the plan is listed as 4GBpromo + 3.82GB = 7.82GB. What's the easiest way to go about getting this rectified?
-
How to use .properties files in Webdynpro Java code?
Hi all, I want to use a logon.properties file when I initial a JCO connection pool in my webdynpro DC (JCO.addClientPool()),but I found when I deployed this DC to the server, it always giv e me an FileNotFoundException. So I donot know how to depl
-
Unable to be heard when making a call?
I am unable to be heard when making a call, but can be heard when using speaker or headphone
-
Mail Doesn't Warn if Subject: is empty
If both the content of the mail body and the Subject header are empty, Mail opens a warning box to let yo u know. But if just the Subject is empty, mail doesn't warn you. Seems like it used to. Now, BOTH body and Subject need to be empty. I would be
-
Change language in creative cloud
I initially installed creative cloud in Danish, but now I've learned that my teacher will be using the english version, so I'd really like to have that one too. Problem is I can't seem to figure out where I change that setting. I've now uninstalled e