Cisco AIR-SAP2602I-N-K9 vs AIR-CAP2602I-E-K9
What's the difference between "AIR-SAP2602I-N-K9" and " AIR-CAP2602I-E-K9 "?
Hi there, the difference between the two is the regulatory domain they work on. The 802.11 specification as regulatory domains defines the different parameters for antenna gain, transmit power, channel selection, and so on. A (A regulatory domain - FCC):North America, South America, Central America, Australia, New Zealand, various parts of Asia E (E regulatory domain - ETSI):Europe, Middle East, Africa, various parts of Asia As you see on this site for example European shops sell the Cisco air-cap2602i-e-k9: http://hardware.nl/cisco/air-cap2602i-e-k9.html N (N regulatory domain - Non FCC):Mexico, Australia Find all regions divided by Cisco here: http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html
Similar Messages
-
I'm trying to deploy a WiFi solution for a client. It would consist of 2 SSIDs; one for internal users with internal network access and a guest with only internal access.
I have a Sonicwall TZ215:
External IP: x.x.x.x
LAN IP: 192.168.1.1/24
DHCP Server: 192.168.5-195/24
+++++++++++++++++++++++
Cisco SG500:
v1.3.0.62 / R750_NIK_1_3_647_260
CLI v1.0
set system mode switch queues-mode 4
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
hostname xxx
ip ssh server
snmp-server location "xxx"
snmp-server contact "John Doe"
clock timezone CST 0 minutes 0
clock dhcp timezone
ip telnet server
interface vlan 1
ip address 192.168.1.2 255.255.255.0
no ip address dhcp
interface gigabitethernet1/1/1
switchport mode access
interface gigabitethernet1/1/2
switchport mode access
interface gigabitethernet1/1/3
switchport mode access
interface gigabitethernet1/1/4
switchport mode access
interface gigabitethernet1/1/5
switchport mode access
interface gigabitethernet1/1/6
switchport mode access
interface gigabitethernet1/1/7
switchport mode access
interface gigabitethernet1/1/8
switchport mode access
interface gigabitethernet1/1/9
switchport mode access
interface gigabitethernet1/1/10
switchport mode access
interface gigabitethernet1/1/11
switchport mode access
interface gigabitethernet1/1/12
switchport mode access
interface gigabitethernet1/1/13
switchport mode access
interface gigabitethernet1/1/14
switchport mode access
interface gigabitethernet1/1/15
switchport mode access
interface gigabitethernet1/1/16
switchport mode access
interface gigabitethernet1/1/17
switchport mode access
interface gigabitethernet1/1/18
switchport mode access
interface gigabitethernet1/1/19
switchport mode access
interface gigabitethernet1/1/20
switchport mode access
interface gigabitethernet1/1/21
switchport mode access
interface gigabitethernet1/1/22
switchport mode access
interface gigabitethernet1/1/23
switchport mode access
interface gigabitethernet1/1/24
switchport mode access
interface gigabitethernet1/1/25
switchport mode access
interface gigabitethernet1/1/26
switchport mode access
interface gigabitethernet1/1/27
switchport mode access
interface gigabitethernet1/1/28
switchport mode access
interface gigabitethernet1/1/29
switchport mode access
interface gigabitethernet1/1/30
switchport mode access
interface gigabitethernet1/1/31
switchport mode access
interface gigabitethernet1/1/32
switchport mode access
interface gigabitethernet1/1/33
switchport mode access
interface gigabitethernet1/1/34
switchport mode access
interface gigabitethernet1/1/35
switchport mode access
interface gigabitethernet1/1/36
switchport mode access
interface gigabitethernet1/1/37
switchport mode access
interface gigabitethernet1/1/38
switchport mode access
interface gigabitethernet1/1/39
switchport mode access
interface gigabitethernet1/1/40
switchport mode access
interface gigabitethernet1/1/41
switchport mode access
interface gigabitethernet1/1/42
switchport mode access
interface gigabitethernet1/1/43
switchport mode access
interface gigabitethernet1/1/44
switchport mode access
interface gigabitethernet1/1/45
switchport mode access
interface gigabitethernet1/1/46
switchport mode access
interface gigabitethernet1/1/47
switchport mode access
interface gigabitethernet1/1/48
switchport mode access
interface gigabitethernet1/1/51
switchport mode access
interface gigabitethernet1/1/52
switchport mode access
exit
macro auto disabled
ip default-gateway 192.168.1.1
encrypted
+++++++++++++++++++++++++++++++++++=
Cisco AIR-SAP2602I
! Last configuration change at 00:11:27 UTC Mon Mar 1 1993 by administrator
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname XXX
logging rate-limit console 9
enable secret 5 $1$RVFD$DybWHlNypzf3XsnL6RGND/
no aaa new-model
no ip routing
ip domain name XXX
dot11 syslog
dot11 vlan-name Guest_VLAN vlan 200
dot11 vlan-name Internal_Users vlan 300
dot11 vlan-name default vlan 1
dot11 ssid Internal
vlan 300
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 05180704241A18471802161B05
dot11 ssid Guest
vlan 200
authentication open
authentication key-management wpa
guest-mode
mbssid guest-mode
infrastructure-ssid optional
wpa-psk ascii 7 10652D4B5341151E09173E
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-2946962253
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2946962253
revocation-check none
rsakeypair TP-self-signed-2946962253
crypto pki certificate chain TP-self-signed-2946962253
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32393436 39363232 3533301E 170D3933 30333031 30303431
34325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 39343639
36323235 3330819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
81009438 47D6CAB8 36B9260D D5FEFA7A DFA7E065 E47ECCA2 346674C6 54D9C004
D6D62585 DE26A41E 447E8607 D0BD58C5 92899510 4EEBF95C 9352D082 1BB71EBF
72D56DDC 87D55A85 4A242578 6BBD31AD E48C8354 1C7331BD 5ED9F29D 5F8B868E
14DB0C08 3930D2D4 3266ED2D 9902DAA4 A348B722 82FCC132 6FC4BF22 DC7B9DBC
2F010203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 149FB8D9 F772C9DE 4BC86DD9 451902F3 4994F7D8 E0301D06
03551D0E 04160414 9FB8D9F7 72C9DE4B C86DD945 1902F349 94F7D8E0 300D0609
2A864886 F70D0101 05050003 81810054 FBCE018A CC09679F 8CB2D20A C773DE00
51AFA13A AB5105D5 BAAB6F2F B7CAF46A 2BFDCDDC F156593F 16C509EF 8C5215C1
7631DEFA 9E16633C 1E89CE65 C56591B2 5BE90BD0 1941F0EA 5478924C 4C0E229D
013743C3 2D4993E0 C44F9143 89A7A5D6 870E3A6C A772B8BB D032956F 1A5B894A
40EC55B9 8C5E3876 7E4B45FE 3DD00B
quit
ip ssh version 1
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 100 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
encryption vlan 300 mode ciphers aes-ccm
broadcast-key vlan 1 change 10000
broadcast-key vlan 100 change 10000
ssid Internal
ssid Guest
antenna gain 0
stbc
mbssid
station-role root
interface Dot11Radio0.200
encapsulation dot1Q 200 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.300
encapsulation dot1Q 300
no ip route-cache
bridge-group 255
bridge-group 255 subscriber-loop-control
bridge-group 255 spanning-disabled
bridge-group 255 block-unknown-source
no bridge-group 255 source-learning
no bridge-group 255 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 300 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
broadcast-key vlan 1 change 10000
antenna gain 0
dfs band 3 block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1
no ip route-cache
interface Dot11Radio1.200
encapsulation dot1Q 200 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.300
encapsulation dot1Q 300
no ip route-cache
bridge-group 255
bridge-group 255 subscriber-loop-control
bridge-group 255 spanning-disabled
bridge-group 255 block-unknown-source
no bridge-group 255 source-learning
no bridge-group 255 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
hold-queue 160 in
interface GigabitEthernet0.1
encapsulation dot1Q 1
no ip route-cache
interface GigabitEthernet0.200
encapsulation dot1Q 200 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.300
encapsulation dot1Q 300
no ip route-cache
bridge-group 255
bridge-group 255 spanning-disabled
no bridge-group 255 source-learning
interface BVI1
ip address 192.168.1.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.1.1
no ip http server
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
+++++++++++++++++++++++++++++++++++++++++
I was able to get dhcp from the Sonicwall with 192.168.1.0/24, but not from the SG500. I created a scope(192.168.2.0/24 for guest; 192.168.3.0/24 for internal users) I even created DHCP scope on the AP, but cannot get an IP from that either. I creatd an ACL to allow the 192.168.3.0/24 access elewhere, and denied 192.168.2.0 access to other but internet.
If I disabled all scopes on the Sonicwall, I get an APIPA from both AP/SG500. Any thoughts?What is your default VLAN?
On the AP, you configured VLAN 200 to be the native. is that the same with your othe devices?
"encapsulation dot1Q 200 native"
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you" -
Cisco Air-SAP2602E-E with PoE Plus?
Hi to all,
Could be any situation in which the Access point AIR-SAP2602E-E-K9 would need PoE Plus (all four antennas transmiting maximum power, some radio speeds, etc)?
Thanks in advance.Nope.
Only the end-of-sale 1252 and 3602 (when add-on modules are installed) require PoE plus. Every other models are PoE only. -
Is AIR-OPT60-DHCP available on autonomous AIR-SAP2602I access point?
Hello Wireless Experts,
I was able to order AIR-OPT60-DHCP on controller based AP AIR-CAP2602I-E-K9 using CCW, but this option is not available on autonomous AIR-SAP2602I access points.
Is AIR-OPT60-DHCP available on autonomous AIR-SAP2602I access point?
Thanks.
GeorgeThat is a feature and only used in lightweight access points. The standalone autonomous access points don't use that. Just follow the configuration guide for your access point to get you started.
Sent from Cisco Technical Support iPhone App -
Download and upload speed per ssid in air-sap2602.
Dear team,
How to limit the download and upload speed per ssid in air-sap2602 ?
SSID =5MB download + 1upload
SSID= 30MB download + 5upload
RegardsIf you need help with traffic shaping, you should post your question on the rLAN, Switching and Routing forum:
https://supportforums.cisco.com/community/netpro/network-infrastructure/switching
You can also look for examples by searching Configure 1941 traffic shaping:
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfgts.html
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfcbshp.html
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Converting air-sap2602i-s-k9 from autonomous to LWAPP
Hi guys,
I need your expertise regarding how to convert from autonomous to LWAPP using AIR-SAP2602i-s-k9 with IOS version of ap3g2-k9w7-xx.152.-2.JA.
I'm following these commands but it is not available
debug capwap console cli or debug lwapp console cli
I cannot proceed to convert it Did I miss something or the 2600 series doesn't support LWAPP convertion ?
thank you
ErikHi Erik,
Those commands aren;t going to work, they're debug commands for a lightweight AP.
Here is the guide to upgrading:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
It's pretty simple though, get the lightweight software follow the upgrade tool instructions to load new software.
Though, you have a newer AP so you'd be ok just to load the new software on, if it's only for a small amount this is fine.
Thanks
Chris -
Can AIR-SAP2602E/I-C-K9 convert to controller based AP?
Can AIR-SAP2602E/I-C-K9 convert to controller based AP?
both S2G1K9W7-15202JA/ JB available?here are the procedure:
https://www.youtube.com/watch?v=wWDrFjwVNb0
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
Regards -
Cisco AIR-AP1242AG-A-K9 Vs AIR-LAP1131AG-N-K9 Which AP is best
Dear All,
I am confused between AIR-AP1242AG-A-K9 and AIR-LAP1131AG-N-K9, we have WLC 4400 which supports both, which one will be the best.
and what are the adv. adn disadv. of both.
Thanks,
Almas...Almas,
Depends on what you are looking to do. Both are good for any standard deployment, i.e. office space, hallways.
The 1242 is a bit more flexible as it has external antenna that can be articulated. So you can mount it on a wall, or on the ceiling. The down side, is they will be visible.
The 1131 has built-in antenna, and is designed to be mounted horizontally, on a ceiling for example.
So depending on where you can mount, that will determine the type of AP you need to use -
Compatibilidad de AIR-AP1261N-A-K9 con AIR-ANT24120
Buenos dias
queria saber si hay compatibilidad con AIR-AP1261N-A-K9 y AIR-ANT24120.
ayudaNo.
La antena es compatible con los productos de Cisco Aironet de radio que utilizan un conector de rosca de polaridad inversa naval (RP-TNC) conector.
1260 antenas compatibles
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/at_a_glance_c45-513837.pdf -
Hi,
Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it's aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes..
Thanks,
RennussAsk the content provider.
-
my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?
What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid. -
Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out.Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out. -
Local_nostrip.arm-air.txt is missing in AIR SDK 16
I merged Flex SDK 4.6.0 and AIR SDK 16.0.0.272 and use it in the Flash Builder 4.6.
I downloaded AIR SDK 16.0.0.272 in the following :
( Because I use Flash Builder, I downloaded the original AIR SDK without the new compiler. )
http://www.adobe.com/devnet/air/air-sdk-download.html
I added ANE files to my app and entered iOS SDK path in the properties window of project.
* iOS SDK path : /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS8.1.sdk/
When I build my app, the following error occurred :
After I read the error message, I check whether local_nostrip.arm-air.txt is in the specified location.
I found local_nostrip.arm-air.txt is missing in the sdk - it does not exist in the {pathtosdk}/lib/aot/lib/.
In the AIR SDK 15, local_nostrip.arm-air.txt file is in the {pathtosdk}/lib/aot/lib/.
Can I use local_nostrip.arm-air.txt of the AIR 15 instead?
Does anybody know?I am using Flash Builder 4.6.
I can't found where "run configuration" and "custom launch" is. -
I made a mistake in my macbook air now in my macbook air showing windows how can i put it back again to macbook air
You need to provide a lot more detail as to what you did.
Were you setting up bootcamp?
Did you blindly install Windows without using bootcamp?
If you set up bootcamp, press and hold the option key when you hear the start up bong until the screen shows both operating systems.You can then select the one that you want. -
Can you use a AIR-PWRINJ-FIB with a AIR-CAP3502I-A-K9 access point?
Is it possible to use a AIR-PWRINJ-FIB with an AIR-CAP3502I-A-K9 access point?
You cannot use a mouse as it defeats the point of a MacBook. You can although have a keyboard for the iPad which allows word processing and simple things like typing emails. Hope this helps
Maybe you are looking for
-
as i said, i checked onto itunes on my pc and noticed all the songs i had in my library had been erased, except for the songs i had purchased on itunes...how do i retrieve my songs...??
-
Here are my Error Codes: Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DF023, DW063 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 18 error(s) ---
-
OJMS and Standalone Java Client
Hi , any one had luck in accessing the ojms queue from a standalone java application.I am using oc4j standalone 9.0.0.3 container.I was able to do it from a jsp page . But when i tried the same from standalone java client , its giving me javax.naming
-
Trying to open port 8080 in WRT400N for external access
Hi, I have tried everyhting I can find and I still can't get it open. I verified no port 8080 is in use with the "netstat -a" trick I got a router checker that verifies I have only one router. I got a free app that tells me the port is not open. I tu
-
Bookmarks bar missing can't restore it
some time a site opens a pop up window without a bookmarks bar, I can't get it back by re-selecting it so I have to open a new window to get the bookmarks bar back. What is the solution? What is causing this?