Cisco AIR2602E not coming up when Antenna attached

Hi All,
I am facing a weird kind of situation. At one of my client side, we have Cisco AIR-2602E APs with ANT-2566 patch antennas. At one IDF, where Cisco 2960X are installed, the APs are not powering up when Antenna is attached. Once the Antenna is removed, the APs come up and then when Antenna is attached, it works fine. I have configured the port with "power inline port 2x-mode" command as well, but no use. Is there any issue with the Switch or AP?
Regards, Sohail

Currently, this is the status of the port.
#show power inline g1/0/1
Interface Admin Oper Power Device Class Max
(Watts)
Gi1/0/1 auto off 0.0 n/a n/a 30.0
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
Gi1/0/1 30.0 30.0

Similar Messages

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

ITunes does not turn on when iPhone attached.

I know I'll feel stupid after somebody gives me the answer to this. But, what the heck, if I don't ask I won't get. So here it goes: My iTunes does not turn on automatically when I attach my iPhone to my Mac. I have to open the application manually. Is there a setting to make it come on when I attache my iphone?

Yes, there is a setting to make it happen. Connect your iPhone to your Mac, and click on it in the iTunes column so it shows the iPhone information. Click on Summary, got to the bottom of that page, under Options, and check the box that says "Automatically sync when this iPhone is connected".
P.S. I know how you feel. I think I have posted about a dozen questions that I have ended up answering myself the next day when I wake up and think about the problem again.

ITunes not coming up when iPod is connected to laptop

When I plug my iPod Nano into the laptop where my iTunes music library is stored, the iTunes program doesn't begin automatically and the laptop gives me a prompt indicating that it is recognizing the iPod as an E drive. Meanwhile, the iPod shows "Do Not Disconnect." The cable is fine, as it works on my desktop, and I get the same response on the laptop regardless of what USB port I used. I tried switching my iPod so that it was tied to the iTunes library on the desktop, but this only resulted in all the pre-loaded garbage on the desktop replacing all of the songs I liked on the iPod. The iTunes software on the laptop will come up when I click on the icon, and the library with the songs I like is still intact there. So how do I get the laptop to recognize the iPod properly, or in the alternative, copy the iTunes library from the laptop to the desktop? I'm hesitant to try reloading the iTunes software on the laptop for fear of wiping out the iTunes library.

I have the same-ish problem, my laptop is not showing my iPod even though the computer says it's there and it appears connected in diagnostics.
You can try the 7 R's suggested by Apple but they haven't worked for me. If you reinstall iTunes you won't erase all your music because it's stored in the library, not in iTunes itself - trust me I've uninstalled and reinstalled it about 17 times over the past day or two and all my music is still there.
If you find a solution PLEASE let me know!

Energy saver not coming on when lid closed

I'm not sure if this because I changed some setting or because I did the battery sw upgrade but now when IU close the lid on my MBR it does not sleep. The apple on the back of it stays lit, and it looks like the display never goes off. Is there a setting that controls this?

I have the A1175 model number in the recall but my serial number ends in WCRA which has not yet been recalled.
There was an update associated with this recall which I installed (and can't find the link for now). I think that's what screwed with my energy saving.
My MBP also has a problem when it comes out of sleep on battery power the display is very very dim, so dark that you would think it is not running. But it is. The keys are slightly lit up and if I take it in a dark room I can see the screen just a little.
f10 does not brighten it up. The problem is intermittent and seems only to happen when I can't call Apple about it. If I restart the display works fine. Of course I lose whatever was open.

Columns "Max Pr Pts" and "Pt Min Prc" not coming automatically when we enter condition type 0LM1

Hi,
In the product master data COMMPR01, If we search any sales product and in condition tabs , when we give condition types 0LM1 in conditions, Max Pr Pts and Pr Min Prc columns are not getting added automatically as displayed below(The screen shot was taken in the another where it is working)
Could you help us to find how these two columns comes automatically when enter the condition 0LM1 in the product under condition tab.
System Details : QD3/504
Best Regards,
Manmohan

Hi Manmohan,
For Loyalty related functionalities, please use the Set Type - REWARD_PRO_LOY to the product categoty.
Details are given in SAP note:1331970.
Regards,
Srinivas

Iphoto 09 slideshow, music is not coming out when i export to idvd

hello,
I made a slideshow with about 500 pictures in iphoto 09. I aded music- several songs using a custom playlist. The music plays when i preview the slideshow in iphoto, but when i checked it after exporting (sharing to idvd) idvd the music does not play when i preview the slideshow before burning in idvd. I tried exporting a short slideshow and the music played back. Any suggestions?
thanks

Is any of the music purchased from the iTunes Store?
Regards
TD

IPhoto Batch Change window is not coming up when selected.

I have been using iPhoto for a couple of years now, and I would consider myself to be an intermediate user of the application. I mention this so that everyone knows that I am not crazy, and simply not doing something wrong. I am trying to perform a batch change of a few images, and when I click on batch change the window with the options will not come up. I made sure I had the latest patches, etc.. I am running the latest OS version, and I am at a loss here. I have tried doing a batch change on a single image, and multiple. I have tried images that I have done batch changes on in the past just to make sure it was not the new image files that were the issue. Nothing works. Please advise...

Welcome to the Apple Discussions. Log into another account on your Mac and see it you can get it to come up there. Post back with the results. Have you repaired disk permissions lately?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Approval messages not coming back when approving by mail

Hello,
We are on SRM 4.0
Approval messages are sent from SRM to different approvers by mail. This works fine.
But when the person approves by mail this doesn't work.
In transaction sost messages are still with 'grey' status and in transaction scot messages are all in status 'in transit'.
This happens only in our Production environment.
Has anyone suggestions?
Thanks,
Laurent.

Further to my previous reply , please also check the following
>
In transit
Number of send orders that are currently in process
outside of the SAP system, that is, the messages have
been transferred to the external nodes by the SAPconnect
send process but neither a positive nor a negative status
message has been received
>
check the following in your system
transaction SCOT--> in the menu
Settings ---> confirmation of reciept
have you set the value to 'SAP connect does not expect confirm.for
internet mail ?

Emails sent from Thunderbird are not getting received when signature attached

Emails sent from Thunderbird aren't being received by my yahoo and gmail accounts when I have the signature attached.
It's a business email account, and I really need to have a professional signature.
Thank you
Susan

There is a reason we suggest only composing HTML signature in the composer and saving the file. However, could you email me to see what that signature actually looks like (It might bounce we will see how google likes it.) this forum really messes up HTML source
Click on my name beside the response on the forum for my email address.

Push Notifications not coming through when in sleep mode

I recently upgraded to 3GS from 3G. I just noticed that no push notifications come through when the phone is in sleep mode. It used to work fine on my 3G. I haven't changed any network settings on my router at home. I do not use 3G data, only wifi. Is there a fix for this or does the 3GS have an issue with push notifications?

Shouldn't my iPhone at least fetch my email, if I have set it to 15 minutes. I would expect that it turns on the wifi to poll the email server for new messages. However in my situation, even when I leave my iPhone the entire night it will not once alert that there is a new message. Only when I finally wake the iPhone does it finally show up. I'll unlock the phone and then about 10 seconds later it will sound the new mail alert. So, to me that means that fetch doesn't initiate the wifi connection for some reason. Something has to be wrong.

Cisco ASA not returning traffic when wccp peering with Bluecoat.

Experts,
My setup has a Cisco ASA where we are doing wccp with a Bluecoat SG box. The traffic gets redirected to the Bluecoat due to the wccp settings so it's just transparent to the end users. Theye do not have to do any manual proxy settings in their IE.
We however notice that somehow the ASA does not return these connection back to the requesting hosts and somehere the connection table breaks. The message we see on the ASA that state table is somehow not being maintained. Any idea where this connection must be breaking?
Regards,
Nikhil Kulkarni.

Nikhil,
Let me give you a little bit of backgrounf in regards to WCCP that can help you. As you stated the ASA will do transparent redirection, so the client doesn't have to configure anything on the PC.
The traffic will get to the ASA (port 80/443 or any configured port) and then the ASA will establish a GRE tunnel with WCCP server and will redirect the traffic. After the Bluecoat receives the traffic it will "spoof" the IP address of the requested web page (the WCCP server needs to have direct comunication with the client PC without passing through the ASA). I have seen some issues where the ASA and the WCCP server are unable to establish the GRE tunnel becuase the ASA uses the highest IP address as the router ID and uses this IP address to establish the tunnel. The WCCP keepalives (Here I am, I see you) are sent using the IP address of the closest IP address to the WCCP server.
At this point you may turn on the WCCP debugs and run some "show WCCP" commands.
I hope it helps
Luis Silva

Images are not coming out when application running through jar file.

I have written an application program using j2sdk1.4.1 that needs your help.
My application folder's contents.....................
     C:\Examination\Examination.class <-----This is the main class and application's entry point.
     C:\Examination\ExamBox.class
     C:\Examination\PaperSetterBox.class
     C:\Examination\pspBox.class
     C:\Examination\epBox.class
     C:\Examination\TimerBox.class
     C:\Examination\ReportCardBox.class
     C:\Examination\HelpBox.class
     C:\Examination\AboutBox.class
     C:\Examination\Images\(some jpg & gif files)
     C:\Examination\Sounds\(some au files)
Compilation Report:     There was no error.
Execution Report :     Was working properly using the command:- java Examination
Now, I created a jar file for my application in the following steps.................................
          STEP-1:          Firstly, I created a text file(mainclassInfo.txt) that contains
          the line:--     Main-Class: Examination
          This line would be automatically added to the default manifest file when I would include the                name of that text file with the command to create the jar file.
          Location of the text file I created:     C:\mainClassInfo.txt
          STEP-2:          Then I went to C:\Examination and executed the following command(by using                'Command prompt'):--------------------------------------------------------------------
jar cmf C:\mainClassInfo.txt Examination.jar Examination.class ExamBox.class PaperSetterBox.class pspBox.class epBox.class TimerBox.class ReportCardBox.class HelpBox.class AboutBox.class Images Sounds
Finally, I got the jar file:-     Examination.jar
Double clicking on it application ran as it was expected.
Then, I thought, that as all the files & folders the application needed to run properly were packaged in the jar file; I should delete all the contents of the folder 'Examination', so that no one could see or use anything of the resources easily. I did that.
So, then it became only:-- C:\Examination\Examination.jar
Thereafter, I tried to run the application again and there a problem occurred! The application was running, but the images, those were to be used and shown by the application were missing somehow!!
Moreover, when I kept a copy of those 2 folders('Images' and 'Sounds') into the C:\Examination and ran the application again all the images came out normally!
I just can't understand why it's happening so mysterious?
I don't want to leave anything of the resources in an open place; I mean, outside of the jar file. The images should be used and shown by the application.
Help me please!

double post http://forum.java.sun.com/thread.jspa?threadID=582311

For some reason my iPhone 4s suddenly will not "start sync" when I attach it to my macbook pro. It has worked fine until now. help!

I have been using my iPhone 4s for a while and had no problem syncing it to my macbook pro with Lion. Suddently today it gives me a message that sync does not start. What can I do to fix this?

Oops...my phone is running 6.0.1

Itunes not coming up when I click on the icon???

Please help! I have had itunes for months and have had no problems until now. All of the sudden when I click on the itunes icon nothing happens. I double click as usual, the hour glass appears for a mimute and then nothing. Does anybody have any ideas for what is goign on? If it helps, my ipod still charges when I plug it into my computer. PLease help, I am so frustrated!

Hey Sarah,
I think I have the solution for you. I printed a response from DmitryByk (posted sept 11, 2005) and I followed the process he suggested and got my iTunes back. Look in the threads for iTunes for Windows, installation & upgrades, topic:Success! All fixes togther in one thread..step by step. It worked for me by the time I got to downloading Bonjour for windows. follow it and I think you will be sucessful too.

Cisco AIR2602E not coming up when Antenna attached

Similar Messages

Maybe you are looking for