Cisco aironet 1130g and windows 2003 with cisco ACS

hi
i have configured windows 2003 server with DNS ,Active directory users and dhcp server. and configured my cisco 1130g AP .
i have installed cisco access control server 4.0 because i use LEAP authentication protocol and for the ACS for network configuration i give aaa client ip addresss as AP interface ip and same shared secret for the AP and ACS,.
so when i log to wifi it ask username and password
problem is lap top cannot have a ip address my dhcp server not issue any ip address .
my hiper terminal massage is like this when i connect to wifi
help ...thank you...

As I mentioned now several times already, it is the client and ACS which do the PEAP. The Access point doesn't have to be configured for an eap type. What you did on the AP was setting the AP as a radius server which is duplicate work with what you did on ACS.
So you need on your client to configure either PEAP or LEAP.
Nicolas

Similar Messages

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

NTLM is not working with EP 6 SP 9 on Windows 2003 with IIS 6.

I installed EP 6 SP 9 on windiows 2003 server with IIS version 6.
Configures IisProxy.xml for redirection for filter irj. When I make a call to default website, it in turn calls server with irj filter.
Portal page comes up and requesting me to enter user id password.
I made the changes mentioned by some of the web logs in this site.
I configured HeaderVariableLoginModule an and added as explined by Gregory Wolf on the following topic.
Integrated Windows Authentication with SAP EP 6.0 SP 3 and higher.
I see following log from Ep 6 SP 9 log file security.log from directory E:\usr\sap\DEV\JC00\j2ee\cluster\server0\log\system.
security#Plain###No user name provided.#
#1.5#000C2953326B00430000000100000A780003F358EF2132DE#1111988099323#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####200d0cb09f4b11d9926a000c2953326b#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
#1.5#000C2953326B00440000000000000A780003F3591D22E168#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
#1.5#000C2953326B00440000000100000A780003F3591D22E215#1111988846027#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####dd1f09b19f4c11d98e98000c2953326b#SAPEngine_Application_Thread[impl:3]_7##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
#1.5#000C2953326B00450000000000000A780003F359227DE92E#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###No user name provided.#
#1.5#000C2953326B00450000000100000A780003F359227DEDC7#1111988935662#/System/Security#sap.com/irj#com.sap.engine.services.security#Guest#18####128c40e09f4d11d9acb7000c2953326b#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security#Plain###Cannot log info about the logon attempt because the user name is null.#
Lots of weblogs are pointing to remote_user value in IisProxy.log file. I am not able to see that.
I also tried switching IIS 6 to run as IIS 5 and did not help much at all.
Please help me on the issue.
I did not change authschemes.xml file.
My IisProxy.xml file looks as follows:
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE ISAPI-config[
     <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
     <!ATTLIST ISAPI-config
          version CDATA #REQUIRED
     >
     <!ELEMENT filter (log-path?)>
     <!ATTLIST filter
          name CDATA #IMPLIED
          log-level CDATA "3"
          log-flags CDATA "0x00000001"
          debug-flags CDATA "0x00008000"
          priority ( high | medium | low ) "high"
          extension-url CDATA "/scripts/IisProxy.dll"
          authentication ( skip | normal | forward ) "normal"
          remote-address ( skip | forward ) "skip"
     >
     <!ELEMENT extension (
          keystore-dir?,
          log-path?,
          data-path?,
          trace-path? )>
     <!ATTLIST extension
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT keystore-dir (#PCDATA)>
     <!ELEMENT log-path (#PCDATA)>
     <!ELEMENT data-path (#PCDATA)>
     <!ELEMENT trace-path (#PCDATA)>
     <!ELEMENT mapping (
          source+,
          target,
          compress-types*,
          protocol-header?,
          certificate-header?,
          cert-chain-header?,
          cipher-header?,
          keysize-header?,
          keystore-path?,
          log-path?,
          data-path? )>
     <!ATTLIST mapping
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          keep-alive ( true | false ) "true"
          use-continue ( true | false ) "true"
          close-socket ( true | false ) "true"
          close-socket-delay CDATA "1000"
          thread-count CDATA "100"
          max-socket-age CDATA "37"
     >
     <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
     <!ATTLIST source
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT protocol (#PCDATA)>
     <!ELEMENT host (#PCDATA)>
     <!ELEMENT port (#PCDATA)>
     <!ELEMENT prefix (#PCDATA)>
     <!ELEMENT new-prefix (#PCDATA)>
     <!ELEMENT target (protocol, host, port)>
     <!ELEMENT compress-types (#PCDATA)>
     <!ATTLIST compress-types
          min-size CDATA "1024"
     >
     <!ELEMENT protocol-header (#PCDATA)>
     <!ELEMENT certificate-header (#PCDATA)>
     <!ELEMENT cert-chain-header (#PCDATA)>
     <!ELEMENT cipher-header (#PCDATA)>
     <!ELEMENT keysize-header (#PCDATA)>
     <!ELEMENT keystore-path (#PCDATA)>
     <!ELEMENT config ( source+ )>
]>
<ISAPI-config version="1.6">
     <filter name="IisProxy filter"/>
     <extension name="IisProxy extension" />
     <mapping name="IisProxy samples">
          <source>
               <protocol>http</protocol>
               <prefix>/irj</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello2/</prefix>
               <new-prefix>/Hello/</new-prefix>
          </source>
          <target>
               <protocol>http</protocol>
               <host>slcsepw04vd.pacificorp.us</host>
               <port>50000</port>
          </target>
          <compress-types>text/html, text/plain</compress-types>
     </mapping>
     <mapping name="Secure IisProxy samples">
          <source>
               <protocol>https</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <target>
               <protocol>https</protocol>
               <host>localhost.your.corp</host>
               <port>8443</port>
          </target>
          <keystore-path>c:\sec\SAPSSLC.pse</keystore-path>
     </mapping>
     <config>
          <source>
               <protocol>http</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
          <source>
               <protocol>https</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
     </config>
</ISAPI-config>
Please help me. I am not sure what is missing. Please make a note that Portal version is EP 6 SP9 & Server is Windows 2003 with IIS 6.

I made the change as you requested and it did not help.
I do not see any remote_user entry in IisProxy.log file.
Please let me know the procedure to get REMOTE_USER into the IisProxy.log file.
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE ISAPI-config[
     <!ELEMENT ISAPI-config ( filter, extension, ( mapping | config )* )>
     <!ATTLIST ISAPI-config
          version CDATA #REQUIRED
     >
     <!ELEMENT filter (log-path?)>
     <!ATTLIST filter
          name CDATA #IMPLIED
          log-level CDATA "3"
          log-flags CDATA "0x00000001"
          debug-flags CDATA "0x00008000"
          priority ( high | medium | low ) "high"
          extension-url CDATA "/scripts/IisProxy.dll"
          authentication ( skip | normal | forward ) "normal"
          remote-address ( skip | forward ) "skip"
     >
     <!ELEMENT extension (
          keystore-dir?,
          log-path?,
          data-path?,
          trace-path? )>
     <!ATTLIST extension
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT keystore-dir (#PCDATA)>
     <!ELEMENT log-path (#PCDATA)>
     <!ELEMENT data-path (#PCDATA)>
     <!ELEMENT trace-path (#PCDATA)>
     <!ELEMENT mapping (
          source+,
          target,
          compress-types*,
          protocol-header?,
          certificate-header?,
          cert-chain-header?,
          cipher-header?,
          keysize-header?,
          keystore-path?,
          log-path?,
          data-path? )>
     <!ATTLIST mapping
          name CDATA #IMPLIED
          log-level CDATA "1"
          log-flags CDATA "0"
          debug-flags CDATA "0"
          keep-alive ( true | false ) "true"
          use-continue ( true | false ) "true"
          close-socket ( true | false ) "true"
          close-socket-delay CDATA "1000"
          thread-count CDATA "100"
          max-socket-age CDATA "37"
     >
     <!ELEMENT source (protocol, host?, port?, prefix, new-prefix?)>
     <!ATTLIST source
          access ( filter | direct | both ) "filter"
     >
     <!ELEMENT protocol (#PCDATA)>
     <!ELEMENT host (#PCDATA)>
     <!ELEMENT port (#PCDATA)>
     <!ELEMENT prefix (#PCDATA)>
     <!ELEMENT new-prefix (#PCDATA)>
     <!ELEMENT target (protocol, host, port)>
     <!ELEMENT compress-types (#PCDATA)>
     <!ATTLIST compress-types
          min-size CDATA "1024"
     >
     <!ELEMENT protocol-header (#PCDATA)>
     <!ELEMENT certificate-header (#PCDATA)>
     <!ELEMENT cert-chain-header (#PCDATA)>
     <!ELEMENT cipher-header (#PCDATA)>
     <!ELEMENT keysize-header (#PCDATA)>
     <!ELEMENT keystore-path (#PCDATA)>
     <!ELEMENT config ( source+ )>
]>
<ISAPI-config version="1.6">
     <filter name="IisProxy filter" authentication="forward"/>
     <extension name="IisProxy extension" />
     <mapping name="IisProxy samples">
          <source>
               <protocol>http</protocol>
               <prefix>/irj</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <source>
               <protocol>http</protocol>
               <prefix>/Hello2/</prefix>
               <new-prefix>/Hello/</new-prefix>
          </source>
          <target>
               <protocol>http</protocol>
               <host>slcsepw04vd.pacificorp.us</host>
               <port>50000</port>
          </target>
          <compress-types>text/html, text/plain</compress-types>
     </mapping>
     <mapping name="Secure IisProxy samples">
          <source>
               <protocol>https</protocol>
               <prefix>/Hello/</prefix>
          </source>
          <target>
               <protocol>https</protocol>
               <host>localhost.your.corp</host>
               <port>8443</port>
          </target>
          <keystore-path>c:secSAPSSLC.pse</keystore-path>
     </mapping>
     <config>
          <source>
               <protocol>http</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
          <source>
               <protocol>https</protocol>
               <host>localhost</host>
               <prefix>/IisProxy</prefix>
          </source>
     </config>
</ISAPI-config>
Please let me know what is missing.
Thanks.

Oracle 9i and windows 2003 R2 installation issues

Hi All,
I have a windows 2003 R2 server with oracle 9.2.0.8 installed both OS and DB are 32bit. The server has 12gb ram and I therefore use AWE and /PAE, however when ever the number of connections exceeds >60 memory errors start to appear and sessions crash. Has anyone out there carried out a successful install of 9i and windows 2003 R2. Can anyone help with the resolution of these issues.
regards
Alan

some more information
I’ve just restarted the server with its full quota of 16GB of RAM and selected both boot.ini switches (/PAE and /3GB) at server startup. I then amended the dbblock_lru_latches parameter from 128 to 64. Before I even started the database I tried running ‘ipconfig /all’ at the command prompt with the following result:
D:\Oracle>ipconfig /all
Windows IP Configuration
An internal error occurred: Insufficient system resources exist to complete the requested service.
Please contact Microsoft Product Support Services for further help.
is it windows causing these issues?
rgds
alan

MSI K9N Neo board- and Windows 2003 R2

Hello,
I am having some compatibility issues with running a K9N Neo board and Windows 2003 r2
--I cant get core center to run
--I cant get audio/sound to work, it is all installed except for one thing.
so then i killed by loading XP drivers that it did not like.
Does anyone have a list of the minmum drivers off my CD that i should install to get it going, or are they on the MSI site for W2k3? I could not find them.
This machine works totally fine with XP and Vista.
thanks

That is mostly correct, absolutely. But it happens that Microsoft thought-up some security measure or two that prohibits some - for example - updating procedures. Here is an example, but I doubt that is your problem. Please note the kb number, you don't have to learn Swedish.
http://support.microsoft.com/kb/922582/sv
Modificacion: Very few companies do I believe produce special 2003 drivers. Don't think I ever saw any MSI ones, anyway. Isn't it enough that XP and Vista works? Those are better for gaming, entertainment, VOIP and such.

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

Did you go through all the options?
Also this:
Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

SAP 4.6c with 32 bit kernel and Windows 2003 EE 64 bit - memory issues?

Dear Colleagues.
My apologies for this simple question. I would appreciate your assistance and expertise for this as I think I have confused myself and I would appreciate clarification.
Running an SAP 4.6c system on SAP Kernel 46D_EXT2 32-bit with Windows 2003 Enterprise Edition 64-bit and ORACLE 10.2 64 bit.
Could you confirm that there is still memory address space limitations due to the 32-bit SAP kernel?
It is the SAP Kernel that determines the addressable operating system limit for R/3 extended memory under Windows NT?
Do I still need to set the 3GB option on the system to allocate more than 2.5GB of SAP buffers and extended memory space?
I have taken a look at SAP Notes 110172 and 129813, but I just need clarification?
Thanking you in advance.
Kind Regards,
Alcatz

> Could you confirm that there is still memory address space limitations due to the 32-bit SAP kernel?
Yes.
>> It is the SAP Kernel that determines the addressable operating system limit for R/3 extended memory under Windows NT?
On a 64bit OS it is a bit different, effectively you can use 4 GB per workprocess.
> Do I still need to set the 3GB option on the system to allocate more than 2.5GB of SAP buffers and extended memory space?
No.
Markus

Problems with Active Directory and Windows 2003

Hello,
I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
I turned on debugging messages on DirectoryServices:
sudo killall -USR1 DirectoryService
When in Windows, using the Administrator user I try:
net use \\10.0.0.1 /user:domain\Administrator
Where 10.0.0.1 is the Mac.
In the Mac I get from
tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
The key line seems to be:
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
But I don't know what that ADSEngine.mm is.
XServe G5 Mac OS X (10.4.9)

Hello.
Thanks for your reply.
I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
When I use
net use x: \\10.0.0.1\share /user:domain\user1
I get prompted for a password, but it doesn't work.
I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
This is what the Samba log.smbd log shows:
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
makeserver_infoinfo3: pdbinitsam failed!
[2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
[2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
This is what the DS log shows:
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
XServe G5 Mac OS X (10.4.9)

Dual Boot with Windows XP and Windows 2003

I am trying to install Dual operating system on my T61 Thinkpad as below.
1.Installed Windows XP on C Drive Default Factory state
2.Installed Partition Manager
3.Created new partition between Preload[C:] and SERVICEV001[*:] in NTFS format using Install another Operating system option.
4.During Installation of Windows 2003 Server when system got rebooted it is throwing following error and unable to complete installation
<Windows Root>\system32\ntoskrnl.exe missing or corrupt.
Could any one help out...
Regards
Aerra

Well, that is an odd error you are getting with the latest GPIB driver, but it is perhaps most closely linked to the fact that Windows Servers aren't officially supported OS'. We do know of customers that had Windows Server 2000 where the drivers for a Windows 2000 PC worked well on the server, but once again the Server is technically not a supported OS. Anyhow, the latest driver for XP should probably work for the Windows Server 2003, however it has not been tested by NI.
To clarify, every single response from your GPIB device included "? At" at the beginning? Does that include testing in MAX or LabVIEW or is it just with IBIC?
Logan S.

DNS Resolver not working with JDK 1.5.0_6 and Windows 2003

I have a Windows Server 2003 machine which now has Java JDK 1.5.0_6 installed on it. Somehow the DNS resolver doesn't work - every call to InetAddress.getByName("host") throws an UnknownHostException. I've tried de-installed java and re-installing, but the problem remains. No traffic seems to be generated (i.e. no packets to port 53) when getByName() is called. I don't have any kind of firewall on the Windows Server 2003 machine.
Has anyone ever seen this kind of behaviour / problem before and know of a solution?
Thanks,
Peter

Ok, I finally managed to solve this problem. What was happening was that IPv6 was installed on this computer, and as a result Java was trying to do a DNS lookup using a IPv6 socket and failing. With the help of TracePlus Winsock, I discovered that internall Java's InetAddress.getByName does this:
WSAStartup
socket(INET6)
getaddrinfo
WSACleanup
Two solutions are possible - either set the system preference java.net.preferIPv4Stack to true, or uninstall the IPv6 stack. Since I couldn't find a way to set the system preference in a persistent manner (apart from passing in an argument on the java command line), I uninstalled the IPv6 stack.
Hope this helps someone else.
Peter

SCEP on ISE 1.2 and Windows 2003 Server

Hi there
has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
Thanks in advance and best regards
Dominic

Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here.
I did come across this though that would suggest that it is supported with some tweaks:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
Thank you for rating helpful posts!

Xp_logininfo "Installation problem on windows 2003 with Sql 2005"

Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
Sohail

Hi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason

Cannot establish a link between MacPro and Windows 2003 Server

I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
Can somebody help me out with this issue?

The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Not sure if that's it, but I hope it helps.

Slow response on Windows 2003 with web forms

We are current running Oracle web forms on thin clients on Windows 2000 terminal server. We have installed Windows 2003 on one node of the cluster. When we run the same application on 2003, it is very slow and the screen flashes a lot. It takes 1-2 seconds to echo a keystroke. This is true for Jinitiator 1.3.1.25 and 1.3.1.18. We are using 1.3.1.18 on the Win 2000 terminal server. When I try form=test on Win 2003, the screen has colors and has poorer resolution that running the same on Win2003. The form has a grey background on Win 2000 but is magenta in Win 2003 and you can barely make out the hammer in the prompt. This happens when running from the same thin client with the same resolution and colors. Is there a setting on IE that could be causing this? Is there a problem with Win 2003? The Oracle application server is 9iAS but we see the same probelm with 10g.
Thanks,
Dave

Copying my response from this thread:
Report in Designer fast, in Viewer extremely slow
Thread is now locked.
A "cool" issue, form my perspective as this may be something new to think about / figure out. Not so cool from where you sit...
Anyhow, a few things to check:
1) Compare the runtime of your dev system and the Citrix system. Use Modules to do the comparison.
2) Not sure what runtime was installed, but the most recent MSI / MSM are from SP 1.4:
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100004610752009E/cr2008_fp14_ri.zip
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100004610922009E/cr2008_fp14_mm.zip
Trying the FP 1.4 runtime will be worth a shot.
3) How is the performance on the Citrix when you actually sit right on the server, and not on a work station?
4) Where is the slow down occurring (unfortunately this will require a bit of temporary code modification)? But the bottle necks typically are at:
-report load
- connection to the data source
- setting of parameters
- actual report output, be it to a viewer, export or printer.
I suggest a possible way of tackling this in the performance article (page 4):
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b
Ludek

Upgrade Oracle Client 8.1.7 to 10g on Windows 2003 with IIS / ASP

I am having problems after I install 10201_client_win32 on Windows 2003 which uses IIS ASP application to connect via ODBC to Oracle databases.
tnsping and m/s access can connect but for some reason my ASP application can not connect but doesn't give me any error messages just hangs during ASP database connection
I have a mixture of 8i and 10g DSN connections which I use, I'm not sure if I need to un-install 8.1.7 driver or remove all 8i ODBC to enable this to work
Should ASP be able to connect to a mix of 8 and 10g drivers?
Perhaps some DLL incompatibility or install issue.
Note it works ok on XP workstation but not so far on Win2003 server.
Any help to verify install or things to check would be appreciated
Paul

Since 8.1.7 was never certified on Windows 2003, it's entirely possible that it would cause some problems and might interfere with the 10g client.
If you are confident that the setup on your XP box is identical to the setup on the 2003 box, I would tend to suspect that the 8.1.7 client was causing the problem.
Justin

Cisco aironet 1130g and windows 2003 with cisco ACS

Similar Messages

Maybe you are looking for