Cisco Aironet 1140 Association

All,
     Quick question about the association web interface tab on a 1140.  I have noticed that the Device Type shows as "unknown" and the Name shows as "NONE."  Anyone have a clue as to why?  Thanks for any help!
     Dave

Any resolution on this?
We have about 20 Cisco Aironet APs and they all show the same, Device type unknown, Name NONE

Similar Messages

  • How to load a boot image to cisco aironet 1140 series after missing boot image

    Hi all,
    I need a solution for this. When i switch my cisco aironet 1140 , it s blinking with red light .and gives a message "no boot image to load".
    When i tried next time, by pressing escape it shows this message that i have mentioned below.
    ap:
    ap:
    using  eeprom values
    WRDTR,CLKTR: 0x83000800 0x40000000
    RQDC ,RFDC : 0x80000035 0x00000208
    using ÿÿÿÿ ddr static values from serial eeprom
    ddr init done
    Running Normal Memtest...
    Passed.
    IOS Bootloader - Starting system.
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    Xmodem file system is available.
    DDR values used from system serial eeprom.
    WRDTR,CLKTR: 0x83000800, 0x40000000
    RQDC, RFDC : 0x80000035, 0x00000208
    PCIE0: link is up.
    PCIE0: VC0 is active
    PCIE1: link is NOT up.
    PCIE1 port 1 not initialized
    PCIEx: initialization done
    flashfs[0]: 1 files, 1 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32385024
    flashfs[0]: Bytes used: 1536
    flashfs[0]: Bytes available: 32383488
    flashfs[0]: flashfs fsck took 16 seconds.
    Reading cookie from system serial eeprom...Done
    Base Ethernet MAC address: 28:94:0f:d6:c8:62
    Ethernet speed is 100 Mb - FULL duplex
    The system is unable to boot automatically because there
    are no bootable files.
    C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Compiled Tue 18-Oct-11 14:51 by prod_rel_team
    ap:
    So , now my question is how to load the boot image ? From where will we get this ? OR
    I m also having another Cisco aironet 1140 , Can i get bootimage from that . Kindly let me know the solution from genius ?

    Take a look at this link as it should have the info you need
    https://supportforums.cisco.com/docs/DOC-14636
    Sent from Cisco Technical Support iPhone App

  • Configuring Cisco Aironet 1140 for Radius and setting up a Radius server

    guys i need some help setting up my Radius to work with cisco aironet 1140, i am new at this however i was tasked with setting up a Radius server and setting our AP with WPA2- enterprise so users can log into our AP using AD credentials.
    When i try to setup on the AP a new SSID i do not see the option for WPA2- enterprise?

    Here are other links with examples:
    https://supportforums.cisco.com/thread/331581
    http://targetcisco.blogspot.com/2011/03/cisco-autonomous-access-point.html
    http://downloads.avaya.com/css/P8/documents/100041614
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Cisco Aironet 1140: 3 of our 4 are always hanging

    Our office has 4 Cisco Aironet 1140 access points mounted on the ceiling. They are all powered via PoE. Every few days 3 of the 4 access points hang and have to be rebooted. When they hang I am not able to connect to their web interface to check the logs. The fourth, for some reason, always seems to stay alive.
    I checked the configuration for all AP's and "Hot Standby" is disabled
    They are all using static IP addresses. I've tried 2 different banks of static IP addresses and 3 of 4 still hange so I don't think this is an IP conflict
    I have saved the configurations and compared them and they are all identical, where possible.
    They all have software version: 12.4(21a)JA1
    They all have bootloader version: 12.4(23c)JA1
    I have tried to download the latest software/firmware, but unfortunately I do not have a valid service contract in place with Cisco and therefore can't download the latest version. All of our CISCO hardware was purchased from Amazon resellers and they can't seem to help me with this. I have also tried to contact Cisco and they can't seem to help either. If anyone has a suggestion on how I can get a valid service contract that information would also be very helpful!!!
    Does anyone have any ideas why 3 of our 4 access points would hang? When they hang, I can't login to the web interface and the logs seem to reset when I reset each access point. I have also set up an rsyslog server and I don't see a log entry that would indicate a problem.
    Any ideas?
    Thank you

    Here is the config for one of the AP's that keeps hanging:
    ! Last configuration change at 09:18:05 -1000 Mon Jan 30 2012 by admin
    ! NVRAM config last updated at 09:18:05 -1000 Mon Jan 30 2012 by admin
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname XXX2
    aaa new-model
    aaa authentication login default local
    aaa authorization exec default local
    aaa session-id common
    clock timezone -1000 -10
    ip name-server 8.8.8.8
    ip name-server 8.8.4.4
    dot11 syslog
    dot11 ssid XXX2
       authentication open
       authentication key-management wpa version 2
       guest-mode
       wpa-psk ascii 7 01234567890123456789012
    username admin privilege 15 password 7 01234567890123456789012
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    ssid XXX2
    antenna gain 0
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    no keepalive
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.100.252 255.255.255.0
    no ip route-cache
    ip default-gateway 192.168.100.1
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    snmp-server community MyCommunity RO
    bridge 1 route ip
    line con 0
    line vty 0 4
    sntp server 192.43.244.18
    sntp broadcast client
    end

  • Can't find autonomous image to Cisco Aironet 1140

    Can anyone gives a link?
    -JeIlMa

    Here you go:
    http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

  • Cisco Aironet 1140 Issues (Dropping clients, 5GHz issue, AP Switching)

    Greetings,
    We've been having issues for a while with these Aironet 1140's. We have two of them in the office and the issue is similar to the first issue displayed in this post:
    https://supportforums.cisco.com/docs/DOC-26228
    The only difference is that I can't do this since we don't use a controller.
    We're using Mac clients on Lion/Mt. Lion. We have no issues connecting to the access points, but occassionally the user will drop off one of the AP's(Access Point 2). Recently I changed the setup from TKIP/WPA to AES-CCM/WPA to get the PHY address to 802.11N instead of 802.11G. I got the speeds working fine, but I suppose this caused an issue of people dropping off at different times. I noticed if I remove the SSID from the preferred list and reconnect it goes from WPA to WPA2. Not sure if this is relevant information, just trying to list what I can to resolve this issue. I haven't had any reported issues with the other Access Point(Access Point 1).
    Another issue we have is getting the radio to work on 5GHz for Access Point 1. It seems when a user is connected to the 5GHz signal, it will not load any web pages. Can ping out just fine, and ping internally as well. I've checked to see if the client is getting an IP address, and it is. It also has DNS set to 8.8.8.8 and another DNS IP we use. The other Access Point seems to work just fine with 5GHz enabled. Both work with 2.4GHz with no issues at all.
    Lastly, clients are not switching Access Points to the strongest signal. I've tried this test with 5+ machines running different OS's from Snow Leopard to Mt. Lion. The client will not switch over passively, the Laptop must be closed and reopened to re-establish the connection to grab the closest signal. This isn't a huge issue, but it's something I'd like to get fixed. This could have been an ongoing issue before I switched the AP's to AES-CCM, but I've only noticed it after the fact.
    If there's any additional information needed that could help resolve these issues, let me know.
    Thanks!

    The wireless clients/devices decides which WAPs to join.  It's not a "Cisco thing".  It's the standard.
    That's what I figured, it's just an issue we have been having lately and trying to rule out the possibility it might be an Access Point issue.
    Did you enable WPA and WPA2???  Apple does not like to "choose".  You have to either use WPA OR WPA2.
    Actually, yes I should have included my steps of trying to resolve the issue. For some reason, the SSID would not appear in the listing of SSID's so I removed the preferred connection, which was WPA, and manually added it to be WPA2 Personal on the client. Still saw some issues with a few users, others seem to have rectified or they're not telling me.
    I checked the event logs on the device and saw this:
    Packet to client e0f8.4735.c16e reached max retries, removing the client
    After some research, it was recommended to raise the packet retry value to 128. I haven't received any complaints from the 3 people that usually complain about dropped wifi yet, but it's still too soon to say.
    The only thing I can think of is the signal strength.  Disable the 2.4 Ghz and see what signal strength you are getting with the 5.0 Ghz.
    It should not be signal strength since I am about 10 feet away on my test machine which has the issue as well as any other clients in any distance long enough to grab the connection. I will try turning off 2.4 when there's nobody in the office tomorrow in the morning to see if that actually works. I would like to have it dual band though since we're not all at 5GHz here. With this issue, I was actually fearing that there just may be an issue with the 5GHz radio hardware. We also have an extra 1140 laying around I used for testing; the 5GHz radio worked with identical settings to the one not working.
    Thanks for the reply! I will take a look at what you suggested a little further and keep this updated if increasing the packet retry value actually rectified the problem just in case someone else has the same issue.

  • Question regarding the use of Cisco Aironet 1140 series

    We are looking at deploying some of the Cisco Aironet Access Points as standalone. We are essentially setting up a hotspot. They will mainly be in conference rooms at each of our field offices so visitors attending our meetings can have internet access. Do clients have to use Cisco wireless adapters in order to connect
    to any of Cisco Aironet Access Points or can they use whatever wireless card they have as long as it supports the bands available?
    Thx in advance for any advice given.

    Any product which displays the Wi-Fi Certified logo, including everything from Cisco, should interoperate with any other Wi-Fi Certified gear.

  • Cannot get Windows 7 x64 laptop to connect to AIRONET 1140 WAP

    I recently changed the configuration of my Aironet 1140 from WEP to WAP2-Enterprise to make it more secure. I am using the WAP as the radius server. After making the change I connected my Blackberry to the wap as well as a Samsung Chromebook.  However when I tried to connect my HP laptop it is unable to connect. Watching from the Aironet's console I see that it is processing the association and windows ask me to enter my uid and password. When I do this I get an authentication error. I have tried several times adjusting parameters on windows but it always fails. Here is the configuration of the WAP:
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname ap.acrtek-lab.com
    logging rate-limit console 9
    aaa new-model
    aaa group server radius rad_eap
    server 10.53.55.127 auth-port 1812 acct-port 1813
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server tacacs+ tac_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa session-id common
    dot11 syslog
    dot11 ssid Acrtek-WPA2
       authentication open eap eap_methods
       authentication network-eap eap_methods
       authentication key-management wpa
    username XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    username XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm tkip
    ssid Acrtek-WPA2
    antenna gain 0
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    shutdown
    encryption mode ciphers aes-ccm tkip
    ssid Acrtek-WPA2
    antenna gain 0
    dfs band 3 block
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    no keepalive
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address dhcp client-id GigabitEthernet0
    no ip route-cache
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    radius-server local
      no authentication eapfast
      no authentication mac
      nas 10.53.55.127 key 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      user xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    radius-server attribute 32 include-in-access-req format %h
    radius-server host 10.53.55.127 auth-port 1812 acct-port 1813 key 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
    radius-server vsa send accounting
    bridge 1 route ip
    line con 0
    line vty 0 4
    end
    Windows Configuration:
    Details about network adapter diagnosis:
    Network adapter Wireless Network Connection driver information:
       Description . . . . . . . . . . : Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter
       Manufacturer  . . . . . . . . . : Broadcom
       Provider  . . . . . . . . . . . : Broadcom
       Version   . . . . . . . . . . . : 5.100.82.139
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem29.inf
       Inf File Date . . . . . . . . . : Tuesday, September 18, 2012  5:42:34 PM
       Section Name  . . . . . . . . . : BCM43XNG2022_NT61
       Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4727&subsys_1795103c
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
    Interface GUID: 5bab8bfe-12d7-4e0c-a46b-efc490047802
    Interface name: Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter
    Interface type: Native WiFi
    Profile: Acrtek-WPA2
    SSID: Acrtek-WPA2
    SSID length: 11
    Connection mode: Infra
    Security: Yes
    Connect even if network is not broadcasting: No
    Connection incident diagnosed
    Auto Configuration ID: 2
    Connection ID: 3
    Connection status summary
    Connection started at: 2012-09-18 14:49:56-586
    Profile match: Success
    Pre-Association: Success
    Association: Success
    Security and Authentication: Fail
    List of visible access point(s): 43 item(s) total, 43 item(s) displayed
            BSSID                    BSS Type PHY          Signal(dB)          Chnl/freq    SSID
    00-1C-10-07-38-76          Infra           <unknown>          -79                    11           linksys
    70-56-81-CB-A2-7D          Infra           <unknown>          -55                    10           MRB LLC
    08-86-3B-95-3B-E1          Infra           <unknown>          -77                    11           belkin.be1
    C0-C1-C0-52-FD-5F          Infra           <unknown>          -75                    11           AquaDeer-guest
    70-73-CB-BB-9D-43          Infra           <unknown>          -60                    1           the ridge by apple
    00-17-C5-A5-5A-73          Infra           <unknown>          -67                    2           MsPub
    00-22-B0-BA-C7-E6          Infra           g          -72                    1           mercer
    E0-91-F5-D6-DF-76          Infra           <unknown>          -78                    1           Chick-Fil-A
    04-C5-A4-80-FC-50          Infra           <unknown>          -38                    4           (Unnamed Network)
    C8-3A-35-5D-AE-18          Infra           <unknown>          -82                    4           medialink
    00-23-69-1B-73-C9          Infra           g          -78                    6           Matt and Heather
    94-44-52-68-24-2B          Infra           <unknown>          -73                    5           Belkin.442B
    68-7F-74-7E-50-74          Infra           g          -77                    6           sjslinksys
    00-1D-7E-49-E2-65          Infra           g          -75                    6           Cubs
    00-12-17-4B-4E-0D          Infra           g          -41                    8           (Unnamed Network)
    C0-C1-C0-E4-3F-55          Infra           <unknown>          -78                    6           SG Roi
    C0-C1-C0-66-9F-CA          Infra           <unknown>          -75                    7           Heliman
    66-33-4B-E1-47-27          Infra           <unknown>          -80                    8           Jenny lake's Guest Network
    00-1C-DF-A4-59-FB          Infra           <unknown>          -60                    10           radiofinger
    C0-C1-C0-52-FD-5E          Infra           <unknown>          -76                    11           AquaDeer
    08-86-3B-61-B0-BC          Infra           <unknown>          -76                    11           belkin.0bc
    00-23-69-00-52-20          Infra           g          -70                    11           670term
    58-6D-8F-24-FC-21          Infra           <unknown>          -80                    11           Bluejay1
    04-C5-A4-80-FC-50          Infra           <unknown>          -36                    4           Acrtek-WPA2
    70-73-CB-BB-B3-49          Infra           <unknown>          -73                    1           LeWonderment Inc.
    E6-51-E4-A6-B1-25          Ad hoc           g          -78                    4           megahoc.v24
    00-17-C5-A5-5A-A9          Infra           <unknown>          -79                    5           Vivaces
    00-23-69-B4-5D-3E          Infra           g          -81                    6           Tanda
    D0-66-7B-06-C7-45          Infra           <unknown>          -81                    7           SEC_LinkShare_e70ac7
    00-24-7B-5D-65-FA          Infra           g          -80                    6           myqwest0953
    60-33-4B-E1-47-27          Infra           <unknown>          -81                    8           Jenny Lake
    00-25-9C-23-73-A6          Infra           g          -80                    1           milehigh
    00-24-01-DC-A4-3F          Infra           <unknown>          -81                    3           newwoman
    C4-3D-C7-83-CE-74          Infra           <unknown>          -85                    3           Desilets
    08-86-3B-25-A7-CE          Infra           <unknown>          -86                    11           belkin.7ce
    00-18-39-78-8F-92          Infra           g          -88                    11           paul  landow
    98-FC-11-6E-E7-52          Infra           <unknown>          -80                    11           China
    28-CF-DA-B1-5F-03          Infra           <unknown>          -78                    1           DeSanti
    00-15-6D-D6-04-47          Infra           g          -69                    1           (Unnamed Network)
    00-21-91-10-1A-05          Infra           g          -81                    1           dlink
    1C-7E-E5-30-AE-66          Infra           <unknown>          -79                    5           dlink
    00-15-FF-26-47-98          Infra           <unknown>          -85                    10           Verizon MIFI4510L 4798 Secure
    00-23-69-38-2C-D2          Infra           <unknown>          -82                    1           linksys
    Connection History
    Information for Auto Configuration ID 3
      List of visible networks: 41 item(s) total, 41 item(s) displayed
      BSS Type PHY          Security          Signal(RSSI)          Compatible          SSID
      Infra           <unknown>          No                    22          Yes                    linksys
      Infra           <unknown>          Yes                    82          Yes                    MRB LLC
      Infra           <unknown>          Yes                    26          Yes                    belkin.be1
      Infra           <unknown>          No                    30          Yes                    AquaDeer-guest
      Infra           <unknown>          Yes                    76          Yes                    the ridge by apple
      Infra           <unknown>          No                    62          Yes                    MsPub
      Infra           g          Yes                    36          Yes                    mercer
      Infra           <unknown>          Yes                    24          Yes                    Chick-Fil-A
      Infra           <unknown>          Yes                    94          Yes                    (Unnamed Network)
      Infra           <unknown>          Yes                    16          Yes                    medialink
      Infra           g          Yes                    24          Yes                    Matt and Heather
      Infra           <unknown>          Yes                    34          Yes                    Belkin.442B
      Infra           g          Yes                    26          Yes                    sjslinksys
      Infra           g          Yes                    30          Yes                    Cubs
      Infra           g          Yes                    92          Yes                    (Unnamed Network)
      Infra           <unknown>          Yes                    24          Yes                    SG Roi
      Infra           <unknown>          Yes                    30          Yes                    Heliman
      Infra           <unknown>          Yes                    20          Yes                    Jenny lake's Guest Network
      Infra           <unknown>          Yes                    76          Yes                    radiofinger
      Infra           <unknown>          Yes                    28          Yes                    AquaDeer
      Infra           <unknown>          Yes                    28          Yes                    belkin.0bc
      Infra           g          Yes                    40          Yes                    670term
      Infra           <unknown>          Yes                    20          Yes                    Bluejay1
      Infra           <unknown>          Yes                    95          Yes                    Acrtek-WPA2
      Infra           <unknown>          Yes                    34          Yes                    LeWonderment Inc.
      Ad hoc           g          No                    24          Yes                    megahoc.v24
      Infra           <unknown>          No                    22          Yes                    Vivaces
      Infra           g          Yes                    18          Yes                    Tanda
      Infra           <unknown>          Yes                    18          Yes                    SEC_LinkShare_e70ac7
      Infra           g          Yes                    20          Yes                    myqwest0953
      Infra           <unknown>          Yes                    18          Yes                    Jenny Lake
      Infra           g          Yes                    20          Yes                    milehigh
      Infra           <unknown>          Yes                    18          Yes                    newwoman
      Infra           <unknown>          Yes                    10          Yes                    Desilets
      Infra           <unknown>          Yes                    8          Yes                    belkin.7ce
      Infra           g          Yes                    4          Yes                    paul  landow
      Infra           <unknown>          Yes                    20          Yes                    China
      Infra           <unknown>          Yes                    24          Yes                    DeSanti
      Infra           g          No                    50          Yes                    (Unnamed Network)
      Infra           g          No                    22          Yes                    dlink
      Infra           <unknown>          Yes                    10          Yes                    Verizon MIFI4510L 4798 Secure
      List of preferred networks: 5 item(s)
       Profile: Acrtek-WPA2
        SSID: Acrtek-WPA2
        SSID length: 11
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: Yes
       Profile: ZRDD2
        SSID: ZRDD2
        SSID length: 5
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: GMANNET
        SSID: GMANNET
        SSID length: 7
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: Conference Rm
        SSID: Conference Rm
        SSID length: 13
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: rntdnet
        SSID: rntdnet
        SSID length: 7
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
    Information for Connection ID 4
    Connection started at: 2012-09-18 14:50:08-279
      Auto Configuration ID: 3
      Profile: Acrtek-WPA2
      SSID: Acrtek-WPA2
      SSID length: 11
      Connection mode: Infra
      Security: Yes
      Pre-Association and Association
       Connectivity settings provided by hardware manufacturer (IHV): Yes
       Security settings provided by hardware manufacturer (IHV): No
       Profile matches network requirements: Success
       Pre-association status: Success
       Association status: Success
        Last AP:  04-c5-a4-80-fc-50
      Security and Authentication
       Configured security type: WPA2-802.1X
       Configured encryption type: CCMP(AES)
       802.1X protocol: Yes
        Authentication mode: Invalid (5)
        Number of 802.1X restarts: 1
        Number of 802.1X failures: 0
       Key exchange initiated: No
       Number of security packets received: 2
       Number of security packets sent: 1
       Security attempt status: Success
    Information for Auto Configuration ID 2
      List of visible networks: 40 item(s) total, 40 item(s) displayed
      BSS Type PHY          Security          Signal(RSSI)          Compatible          SSID
      Infra           <unknown>          No                    22          Yes                    linksys
      Infra           <unknown>          Yes                    85          Yes                    MRB LLC
      Infra           <unknown>          Yes                    22          Yes                    belkin.be1
      Infra           <unknown>          No                    32          Yes                    AquaDeer-guest
      Infra           <unknown>          Yes                    64          Yes                    the ridge by apple
      Infra           <unknown>          No                    74          Yes                    MsPub
      Infra           g          Yes                    60          Yes                    mercer
      Infra           <unknown>          Yes                    24          Yes                    Chick-Fil-A
      Infra           <unknown>          Yes                    86          Yes                    (Unnamed Network)
      Infra           <unknown>          Yes                    38          Yes                    medialink
      Infra           g          Yes                    36          Yes                    Matt and Heather
      Infra           <unknown>          Yes                    40          Yes                    Belkin.442B
      Infra           g          Yes                    62          Yes                    sjslinksys
      Infra           g          Yes                    30          Yes                    Cubs
      Infra           g          Yes                    95          Yes                    (Unnamed Network)
      Infra           <unknown>          Yes                    24          Yes                    SG Roi
      Infra           <unknown>          Yes                    28          Yes                    Heliman
      Infra           <unknown>          Yes                    20          Yes                    Jenny lake's Guest Network
      Infra           <unknown>          Yes                    81          Yes                    radiofinger
      Infra           <unknown>          Yes                    10          Yes                    AquaDeer
      Infra           <unknown>          Yes                    32
    Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
    Initialize status: Success
    Information for connection being diagnosed
    Interface GUID: 5bab8bfe-12d7-4e0c-a46b-efc490047802
    Interface name: Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter
    Interface type: Native WiFi
    Profile: Acrtek-WPA2
    SSID: Acrtek-WPA2
    SSID length: 11
    Connection mode: Infra
    Security: Yes
    Connect even if network is not broadcasting: No
    Result of diagnosis: Problem found
    Issue referred to: L2Sec Helper Class
    Root cause:
    Windows could not connect to "Acrtek-WPA2"
    You can try to connect again.
    Repair option:
    Reset your wireless network adapter
    This will disable and then enable the network adapter "Wireless Network Connection" on this computer.
    Diagnostics Information (L2sec Helper Class)
    Details about L2Sec Helper Class diagnosis:
    For complete information about this session see the Wireless Diagnostic Informational Event.
    Helper Class: Layer2 Security
    Initialize Status: Success
    Result of diagnosis: Problem found
    Issue referred to: EAP Helper Class
    Root cause (EAP):
    Network authentication failed\nWindows doesn't have the required authentication method to connect to this network.
    Detailed root cause:
    EAP failed
    Workaround for hypothesis:          Contact the network administrator for "Acrtek-WPA2"
    EAP workaround:          Contact your network administrator\nWindows needs to be configured to use the authentication method required for this network.
    Information for connection being diagnosed
    Interface GUID: {5bab8bfe-12d7-4e0c-a46b-efc490047802}
    Interface name: Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter
    Interface type: Native WiFi
    Profile: Acrtek-WPA2
    SSID: Acrtek-WPA2
    SSID length: 11
    Connection mode: Infra
    Security enabled: Yes
    Connection ID: 3
    Security settings provided by hardware manufacturer (IHV): No
    Profile matches network requirements: Yes
    Pre-Association and association status: Success
    Security and Authentication:
      Configured security type: Robust Secure Network (RSN / WPA2) with 802.1X
      Configured Encryption type: CCMP (AES)
      Security connect status: Fail 0x00050005
      Number of security packets received: 4
      Number of security packets sent: 3
      802.1X protocol: Yes
       Authentication Identity: User only
       IAS Server engaged: Yes
       EAP Method supported by IAS Server: Unknown
       EAP type: 25
       EAP Error: 0x40420016
       Number of 802.1X restarts: 1
       Number of 802.1X failures: 1
       802.1X status: Fail 0x00050005
      Key exchange initiated: No
       Unicast keys received: No
       Multicast keys received: No
    Network Diagnostics Log
    File Name:  A20D3467-8AD4-483E-91F4-9EC5E18AA1F9.Diagnose.0.etl
    Other Networking Configuration and Logs
    File Name:  NetworkConfiguration.cab
    Collection information
    Computer Name:  ACCRETIVE-SW
    Windows Version: 6.1
    Architecture: amd64
    Time: Tuesday, September 18, 2012 2:50:09 PM
    Any help would be greatly appreciated.

    Hello  Mr. Wells,
    Thank you for your question.
    However, the Small Business Support Community is limited to Cisco Small Business Products, and the Aironet products are considered as a Enterprise level devices.
    I recommend you to post this question on the on the correct forum, in order to get a better response.
    You can move your post using the Actions panel on the right.
    Best regards,
    Diego Rodriguez
    Cisco Small Business Community Engineer

  • Wireless site survey doubts with cisco aironet site survey utility tool

    Hi,
    I have 1131 autonomous AP and we have project where we need to implement WLC 5500 with 1140 LAP.
    Before that , we need to do site survey . we are going to use cisco aironet adapter and with the help of site survey utility tool we are planning to do site survey .
    I have below doubt before starting the site survey :
    1) do we need to configure the AP 1131 with existing LAN set-up of client to get connected ?
    If yes , how can i shift this 1131 ap always from one location to another location and connect to respective vlan in switch ?  It would be tedious job ....
    because , We need to connect ( get associated ) our laptop always to 1131 ap and then roam around to get the RSSI , signal strength , SNR and throughput ....  ...
    to configure the AP to existing lan set-up of client , it would not be flexible to do site survey ?
    without that , how can I just plug-in power to 1131 AP with standalone configuration .... and without connecting to switch ( any lan-port ) , do the site survey ?
    Please suggest me .............
    In short , without connecting to LAN set-up of client , how can i do the site survey ?
    2) will it be worth to do site survey with cisco aironet card ( site survey utility ) ? or we should i have different site survey software for the same ?
    Please share the knowledge .... 

    Site Surveys are important and should be done by a professional. A poor site survey can lead to a lot of problems. It would be hard to put all aspects of conducting a proper site survey in a single post. Lets cover a few of the basics.
    1) If you plan to deploy 1140 model access points. Then you should use that AP in autonomous mode so you dont have to be plugged into your network
    2) The AP gets powered by an exteral power source like this battery for exmaple:
    http://www.tessco.com/products/displayProductInfo.do?sku=345625&WT.mc_id=google_base&sp=true
    3) As far as moving the AP around you can purchase a site survey pole like this:
    http://www.tessco.com/products/displayProductInfo.do?sku=392506&eventPage=1
    4) As for software, I like AirMagnet Surveyor
    http://www.airmagnet.com/products/survey/
    But again. There is a lot to know about doing surveys...

  • Cisco Aironet 1300 series

    Hello,
    i have 2 cisco aironet 1300 series configured as root bridge and non root bridge, i managed to configure them and they are associating only when they adjacent , when i separate them them communication fail , could you please help me to solve this . thx 

    Those are very old bridges. So if they are still functioning okay, do they require external antennas or not and do you have external antennas if they do?
    Antenna Interface 
    • AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9: Air interface (integrated directional antenna) 
    • AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R: Two RP-TNC type connectors for external antennas 
    -Scott

  • Cisco Aironet 1200

    Cisco Aironet 1200
    Firmware 12.3(8)JEB
    Hello,
    I want to control client associations when AP load is high.
    Is there an MIB object that enables/disables client associations?
    I have searched the supported MIBS, but i could not find anything.

    An improper combination of power level and antenna gain can result in equivalent isotropic radiated power (EIRP) above the amount allowed per regulatory domain. Here is the URL which indicate indicates the maximum power levels allowed with the Cisco integrated antenna for each regulatory domain and also contain configuration setting.
    http://www.cisco.com/en/US/docs/wireless/access_point/1200/vxworks/installation/guide/higaxd_2.html

  • Cisco Aironet 350 series/panel indicator

                     Cisco Aironet 350
    I have the next indicators signals:
    Ethernet activity= Steady RED
    Association Status=Steady GREEN
    Radio Activity=Steady AMBER
    I can't use the acces point's serial for management system

    Here is a link to the led indicators although your colors aren't shown in the list.
    http://www.cisco.com/public/scc/compass/ap/information_files/led_table_wbg.html
    Based on the age of the unit, no access to the console, all LEDs are on. I would agree with Scott. It's likely bad ..
    Sent from Cisco Technical Support iPad App

  • Cisco aironet 1300 Iphone 3G

    Bonjour
    apres avoir configurer mon routeur cisco aironet 1300 et que la connexion passe tres bien.
    Mais mon probléme en est que je n'arrive a me connecté sur à internet sur mon iphone. la connectivité  entre le routeur et l'iphone pass tres bien.
    et sur d'autres routeurs wifi je peux me connecter avec mon iphone sur internet et tel n'est pas le cas avec mon routeur aironet 1300

    Hi,
    Vous  pouvez essayer de désactiver l'extension Aironet que la désactivation  des extensions Aironet améliore la capacité des machines clientes  non-Cisco de s'associer au dispositif sans fil.
    int dot11 0 or 1
    no dot11 extension aironet
    Link : http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38rf.html#wp1135928
    Regards,
    Madhuri

  • Cisco Aironet 1200 LAP Issues - LAP to Autonomous Mode

    Greetings! After purchasing 4 of the Cisco Aironet 1200 G Series WAPs, I'm now running into a slight issue with them.
    I received these last week with the understanding that if I didn't have the Cisco controller device, I could convert them from being the Lightweight Access Point, back to Autonomous mode with an IOS.
    With this, I checked the documentation that came with the device and found the "Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode" or http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&needs_authentication=yes&CommCmd=MB%3Fcmd%3Dadd_discussion%26mode%3Dshow%26needs_authentication%3Dyes%26location%3D.ee7c7c3.
    From there, I followed the instructions listed under Converting a Lightweight Access Point Back to Autonomous Mode. Before the rename of the file, I checked the device and found AIR-LAP1242G-A-K9 for the Model No.
    One of the Cisco Certified admins here was able to obtain the latest build for the IOS for the device or c1240-k9w7-tar.123-8.JEB1.tar. Per the instructions, I renamed the file to coincide with the model of the device.
    I followed the instructions from there, and it looked as if everything was going well. However, after the upgrade, I'm running into an issue with the following:
    File "flash:/c1200-k9w7-mx.123-8.JEB1/c1200-k9w7-mx.123-8.JEB1" uncompressed and installed, entry point: 0x3000
    executing...
    At this point, the device just locks up. All lights are lit green on the device. According do the documentation, it should reboot and from there, I should be able to access the web interface by IP.
    I've tried to perform the upgrade again using the same IOS build, but the same thing happens with the lock up.
    At this point, I'm assuming the issue is with the build of the IOS that I have and I may have to look at getting an older build. However, before doing so, I thought I would post something here to see if anyone had an idea.
    I may have needed to refine my searching of the forums, but wasn't able to find anything in relation to my issue. If there is something out there, I do apologize for the post and will happily refer to any current information.
    If you need any further information in relation to this, please let me know. Any assistance is greatly appreciated. Thank you!

    Hi Jeffrey,
    Reverting the Access Point Back to Autonomous Mode
    Have a look at Step 3
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
    Using a TFTP Server to Return to a Previous Release
    Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
    Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
    Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
    Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
    Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
    Step 5 Disconnect power from the access point.
    Step 6 Press and hold MODE while you reconnect power to the access point.
    Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
    Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
    Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
    From this doc;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    Hope this helps!
    Rob

  • Cisco Aironet ap1141n-e-k9 help configuration

    Hi all,
    i have just got a brand new aironet access point belonging to 1140 series (1141n-e-k9), it has been a while since i worked last time with cisco devices and i really need few help to configure this AP. (also useful link is appreciated)
    I've an existing (wired) network with a dhcp server that provides IPs for the following class: 192.168.1.0/24 (default gw 192.168.1.254)
    I would like to configure this new AP with ip 192.168.1.253 on gigabit ethernet while radio interface would have ip 192.168.2.1 and act as a dhcp server for following class: 192.168.2.0/24
    Maybe it could be configured in another way but it's important for me to have client connected to ap in a subnet (i.e. 192.168.2.0/24) different from existing one (192.168.1.0/24), is it possible?
    I read the manual with the title: "Cisco IOS Software Configuration Guide for Cisco Aironet Access Points" but i really can't figure out how to accomplish this simple(i guess) task.
    Any help (links,tips or tricks) would be really appreciated (since my brain is about to blow up )
    TIA,
    Antonio

    Hi Scott,
    thanks for your answer and for links you provided , however i have a problem with that.
    is it possible to find a solution for this problem internally to the AP? (sorry if my question would sound stupid)
    atm i can't "put my hands" on the device the ap is connected to (it's a customer's requirement, unfortunately) and i don't know either if the switch would be a cisco device, is there a solution (maybe without vlan) to solve my problem?
    since ap has an gigabitethernet interface and a radio one, couldn't i setup an ip belonging to class 192.168.1.0 to ethernet and an ip belonging to class 192.168.2.0 to radio dot11 and setup a bridge between this two interfaces?
    thanks for your answer and your time,
    Antonio

Maybe you are looking for