Cisco aironet access-point keep asking username/password

Hi all,
Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there. Any idea why that happens?
Thanks in advance!
Gaurav

Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there.You sure it's LWAP? The reason why I'm asking because you would NOT be able to access an LWAP over HTML because it's LWAP.

Similar Messages

CISCO Aironet access point - not able to connect by user.

Hi,
I have CISCO Aironet access point C1130 in my network , but not able to connect by users, I can see below logs from access point. please help on this.
Jun 13 17:50:10.686: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:10.686: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:15.678: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:15.678: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:20.544: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:20.544: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:24.832: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:24.832: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:29.741: RADIUS: Fail-over denied to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: No response from (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS/DECODE: No response from radius-server; parse response; FAIL
Jun 13 17:50:29.741: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
Jun 13 17:50:29.741: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAILOVER_RETRY
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response
Jun 13 17:50:29.742: Client 5864.6c67.3718 failed: EAP reason 0
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: Failed client 5894.6b37.3518 with aaa_req_status_detail 0
Jun 13 17:50:29.742: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds
Jun 13 17:50:29.743: dot11_auth_dot1x_send_client_fail: Authentication failed for 5894.6b37.3518
Jun 13 17:50:29.743: %DOT11-7-AUTH_FAILED: Station 5894.6b37.3518 Authentication failed
Regards,

Hi Niham,
You can try few things to troubleshoot this -
1. check the reachability of Radius server from your wlc (ping).
2. verify the IP address of Raduis server configured on wlc.
3. wlc in the Radius server ?
4. Shared Secret must be same on wlc and in raduis server.
Plz do not forget to rate useful post.
Thanks

Bootup order on Cisco Aironet Access Points

Hello folks
Could you please help me in clarifying the bootup order on Cisco Aironet Access Points
Does the SNMP Agent on the device start before the Startup config is copied to Running Config ?
Because everytime the Cisco Aironet Access Point restart , SNMP trap is generated from Admin down WLAN interfaces (Dot11Radio1/Dot11Radio0) mentioning "Administratively down " .
So my best assumption is that
Access point Restarts - > SNMP Engine starts -> Startup Config is copied to Running config -> Interface is made admin down -> SNMP Trap is sent
Is that correct?
Please help !
Anup

The Clean Access Manager (CAM) manages out-of-band Clean Access Servers (CASs) and switches through the admin network. The trusted interface of the CAS connects to the admin/management network, and the untrusted interface of the CAS connects to the managed client network.
When a client connects to a managed port on a managed switch, the port is set to the authentication VLAN and the traffic to/from the client goes through the Clean Access Server. After the client is authenticated and certified through the Clean Access Server, the port connected to the client is changed to the access VLAN. Once on the access VLAN, traffic to and from certified clients bypasses the Clean Access Server.
In most OOB deployments (except L2 OOB Virtual Gateway where the Default Access VLAN is the Access VLAN in the Port profile), the client needs to acquire a different IP address from the Access VLAN after posture assessment.
For Real-IP/NAT-Gateway setup, the client port is bounced to prompt the client to acquire a new IP address from the admin/access VLAN.
The below URL describe the configuration steps needed to set up your OOB deployment:
â¢Configure Your Switches
â¢Configure OOB Switch Management in the CAM
â¢Configure Access to Authentication VLAN Change Detection
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/416/CAM/m_oob.html#wp1175744

HT6114 my hot mail account will not let me access it keeps asking for password but won't authorise it?

my hotmail account will not open. keeps asking for password but will not accept the password when i enter it. its the correct passwrd?

Hello Duncan,
Thank you for the details of the issue you are experiencing with Mail on your Mac. I recommend the following steps for the issue you described:
If you entered the correct password in the password dialog in Mail, but continue to be asked for your password, try these solutions.
Open Keychain Access, then locate and delete the mail account password item.
Open Disk Utility, select the volume (for your hard disk or disks) in the list, click First Aid, then Verify Disk. After you’ve verified (and repaired, if necessary) the disk, try sending yourself a message.
Mail (Mavericks): If Mail keeps asking for your password
http://support.apple.com/kb/PH14935
I recommend continuing with the following article if the issue persists:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cisco 1230 access point a radio lightweight mode

Will the cisco 1230 access point work in lighweight mode if it is using a radio?

The 1230 can be upgraded to LWAPP with the A Radio model listed below;
Solution Requirements
Migration from autonomous access point mode to lightweight mode is possible on these Cisco Aironet access point platforms:
All 1130AG access points
All 1240 AG access points
For all IOS-based 1200 series modular access point (1200/1220 Cisco IOS Software Upgrade, 1210 and **1230 AP**) platforms, it depends on the radio:
if 802.11G, MP21G and MP31G are supported
if 802.11A, RM21A and RM22A are supported
The 1200 series access points can be upgraded with any combination of supported radios: G only, A only, or both G and A.
All 1310 AG access points
From this good doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html
Hope this helps!
Rob

I have changed both apple i.d and password, now my iphone 4s keeps asking for password to my previous i.d. Previous password and new password wont give me access. What do i do?

As above guys, phone keeps asking for password to previous i.d but neither old or new password will give me access to i tunes/ apps etc any ideas??

Hi Gavin229,
Welcome to the Support Communities!
If you have changed your AppleID information or password, you will need to sign out of your existing iCloud or iTunes Store accounts and sign back in with the new information.
The articles below will explain this in more detail ...
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: Changing your Apple ID
http://support.apple.com/kb/HT5621?viewlocale=en_US
"...remember to update all of the features and services that you use with your Apple ID."
If you can’t sign in to iCloud.com - iCloud Help
http://help.apple.com/icloud/#/mmfc0f1a3b
Cheers,
- Judy

SharePoint keep asking for password

I have few users who add sharepoint site to Outlook client. When they tried to access sharepoint site thru outlook, it keeping prompt for credential, even though
they key in correct username and password.
User's PC running on WindowsXP and Outlook 2007. PC joined to the domain
I had been read many link on internet which telling to add to trusted site but none is working.
e.g. http://www.sharepointdiary.com/2012/04/sharepoint-keeps-asking-for-password.html
I have an user who follow steps mentioned on above link but still outlook keep prompt for password.
User have full access on SharePoint site but when they click on Send and Receive, they receive outlook sync error as attachment. I believe this error due to the
outlook keep prompt even though they already the correct credential.

Noddy,
I had updated my post previously
1. are browsing to the SharePoint list and then from the ribbon selecting the option "Connect to Outlook" ... right ? YES
2. does this list has unique permission ?yes, but when click "show me uniquely secured content", it show the list that may contain items with unique permission but http://project.contoso.com/sites/ASS/Lists/Ass
Leave Calendar not including.
3. what are the permission user has on the site collection ? Full control,Design,contribute,read
4. have root site ? if NO, create one. Does you mean web application? web application is http://project.contoso.com/sites

Outlook 2007 and 2010 on Windows XP keeps asking for password

I have a fresh installation of Exchange 2013 installed on Windows 2012 and the problem is that Outlook 2007 and 2010 which is installed on Windows XP keeps asking for password.
The problem occurs only on Windows XP while on Windows 7 is working fine.
Any help will be appreciated!

Hello
I had similar issue in my environment -Exchange 2010 SP2 UR4-v2 ,DAG 2 MBX servers(MBX1 and MBX2) in production site ,2 CAS in production site ,17 mail box databases , Public folder replicated to all the mailbox servers.
strangely users using outlook 2003 and outlook 2007 were being prompted for user name passwords.
investigations were done as follows
1. test connection status -click on the outlook icon in the lower right of the users desktop.clicked on test connection status ..
2. found that the username was being prompted while attempting to connect to the public folder in MBX1 server.
3. using EMC on the exchange server, changed databases pointing to public folder in MBX1 to public folder in MBX2. This solved the issue for us.however we were not sure of what the exact issue was ..was it public folder corruption in MBX1? .we found
that the users were being prompted for username and password only in outlook 2007 and not in OWA or outlook 2010. this made us rule out possibility of Public folder corruption in MBX1 server.
4.raised a case with microsoft to do a RCA (root cause analysis) . The resolution from them was to change the exchange RPC service on MBX1 from "network service" to "local account" and switch back to "network service".
The reason stated by microsoft is "password cache corruption" .Any ways the problem was solved at the server level.
Hope this helps all of you who have been scratching your head over this issue
Shiva

Finder keeps asking for password verification

Finder keeps asking for password verification when I ask to move or delete a file.
How can I stop this from happening?
Thanks in advance.

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens.
Drag or copy – do not type – the following line into the Terminal window, then press return:
chmod -R -N ~
You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Cannot receive/send emails via Mail on Mac using 10.6.8, keeps asking for password, very frustrating. Any ideas please? Regards

Cannot receive/send emails via Mail on Mac using 10.6.8, keeps asking for password, very frustrating. Any ideas please? Regards

One more time, iCloud mail accounts are .me, .mac and .icloud. New ones are only .icloud.
iCloud mail is a standard Imap account that can be used with any mail client in existence. But You are talking about the ability to automatically setup an iCloud account in mail, which did not exist until 10.7.2.
You can use password or token authentification with iCloud mail (in Mail) it is your choice.
Set the account manually, set it as Imap, use imap.mail.me.com (no P number) for the incoming email and smtp.mail.me.com as the outgoing server.
The full settings (ports and security) are here. Use them and it will work, regardless of domain (mac, me and icloud addresses all use the same settings.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.
For more information on how to use this information with your email application, consult your application's documentation.

Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points

Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

Trying to buy, download a song and keeps asking for password over and over, even after entering correctly. Why?, trying to buy, download a song and keeps asking for password over and over, even after entering correctly. Why?

Trying to buy, download songs on iTunes and keeps asking for password for the account. Entering the password correctly but it keeps asking for password. Have downloaded hundreds of songs before, first time this has happend. Why?
Thanks.

Hi, Trex8.
There are a couple things that you can try to resolve this issue. First, I would recommend processing any updates needed to the computer and iTunes. You can check for updates in iTunes by selecting the help menu and check for updates. If iTunes is on the current version, see the article below.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Make sure to test the results after each troubleshooting step processed.
Regards,
Jason H.

TS1389 Trying to view iTunes account on iPod touch and keeps asking for password over and over started when I purchased an album but payment was declined

I have an IPod touch I'm trying to view my iTunes account and keeps asking for password over and over

Sorry few spelling errors as trying to write this on iPhone it I supposed to say i click continue then asks again for apple ID password, i do so then up comes account and I have selected payment type none. Thanks

Iphone won't download from itunes (purchases or updates) and keeps asking for password

My new Iphone 6 won't download from itunes, whether it is a new purchase, previous purchase or update. Itunes keeps asking for password. Icloud seems to be working, find my phone works, so what do I do? I've signed out and back in to the app store. Restarted my phone. Ugh!!

Google is your friend.
http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-app-downloads-stuck-in-wai ting-on-homescreen/
or
http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/
or
Press on the app until is says "Paused"
Then, click it again. It will download. Just wait, then delete it.

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

Exactly which password are you inputting? iCloud looks for your AppleID password.

Cisco aironet access-point keep asking username/password

Similar Messages

Maybe you are looking for