Cisco Aironet Site Survey Utility with Windows Vista

Where can I download the Cisco Site Survey utility that is supported by Vista?

I to do wonder about this. It would be grand to get an answer from someone at Cisco about this..

Similar Messages

Wireless site survey doubts with cisco aironet site survey utility tool

Hi,
I have 1131 autonomous AP and we have project where we need to implement WLC 5500 with 1140 LAP.
Before that , we need to do site survey . we are going to use cisco aironet adapter and with the help of site survey utility tool we are planning to do site survey .
I have below doubt before starting the site survey :
1) do we need to configure the AP 1131 with existing LAN set-up of client to get connected ?
If yes , how can i shift this 1131 ap always from one location to another location and connect to respective vlan in switch ? It would be tedious job ....
because , We need to connect ( get associated ) our laptop always to 1131 ap and then roam around to get the RSSI , signal strength , SNR and throughput .... ...
to configure the AP to existing lan set-up of client , it would not be flexible to do site survey ?
without that , how can I just plug-in power to 1131 AP with standalone configuration .... and without connecting to switch ( any lan-port ) , do the site survey ?
Please suggest me .............
In short , without connecting to LAN set-up of client , how can i do the site survey ?
2) will it be worth to do site survey with cisco aironet card ( site survey utility ) ? or we should i have different site survey software for the same ?
Please share the knowledge ....

Site Surveys are important and should be done by a professional. A poor site survey can lead to a lot of problems. It would be hard to put all aspects of conducting a proper site survey in a single post. Lets cover a few of the basics.
1) If you plan to deploy 1140 model access points. Then you should use that AP in autonomous mode so you dont have to be plugged into your network
2) The AP gets powered by an exteral power source like this battery for exmaple:
http://www.tessco.com/products/displayProductInfo.do?sku=345625&WT.mc_id=google_base&sp=true
3) As far as moving the AP around you can purchase a site survey pole like this:
http://www.tessco.com/products/displayProductInfo.do?sku=392506&eventPage=1
4) As for software, I like AirMagnet Surveyor
http://www.airmagnet.com/products/survey/
But again. There is a lot to know about doing surveys...

Aironet Site Survey Utility - Vista x64

I want to use the Aironet Site Survey Utility in Vista Ultimate 64bit. I have a CB21 card which the utility does detect. It does not show any access points or that the client card is associated.
Any help would be greatfully received!
Thanks in advance

Actually, after further research, there seems to be a vista x64 version posted :
http://www.cisco.com/en/US/docs/wireless/wlan_adapter/cb21ag/user/release/notes/cb21agvista10rn.html
HTH

HT1689 how do i reset my ipod shuffle 2nd generation with windows vista?

my ipod shuffle will not connect to itunes and i am unable to download the ipod reset utility for windows as this does not work with windows vista which i have on my computer. How else can i reset my ipod to allow itunes to recognise it?

Connect it to iTunes on this new Mac and restore it to factory settings. See this article for instructions on restoring your Shuffle.
http://support.apple.com/kb/ht1481
B-rock

TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Why won't icloud work with windows vista anymore?

why won't icloud work with windows vista anymore?

I had to re-install after the newly released iTunes - for Vista it does work with iClud 2 - not 3. You can download from this site.

Does FireFox work with Windows Vista?

Question is not about the machine I'm using right now - so I haven't opened the "troubleshooting" window. The question is regarding my wife's old Vaio laptop with Windows Vista OS. It browses very slowly. We may want to use FireFox and possibly speed browsing. Uses Chrome now and will want to migrate tabs and favorites (etc).
Is this possible and might it make the system a little faster?

Hi,
Seems like your slowness issues may caused by malware. Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
All of your bookmarks will be transferred over during the initial launch of Firefox after installation.

¿Problems with Windows Vista or Sony Vaio?

Hello everyone
I have a Cisco 2100 WLC with two Access Points 1130, with two WLAN networks, one with WPA2 and the other with Web-Authentication. The two networks works correctly, but I have a client, a Sony Vaio with Windows Vista, which usually give problems, disconnects, and when you try to reconnect, you can not.
When this happens, in the WLC appears the error "Decrypt errors Occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b / g interface of AP xx:xx:xx:xx:xx:xx" .
Sometimes several times to restart the laptop, reconnect. The network card is an Intel 5100, anyone know if there is any inconsistency between this card and Cisco AP? Or is it a matter of O.S.?
I have no other Windows Vista client to verify, the other clients are Windows XP and 7. I have tried reinstalling different drivers on the laptop and not the solution.
Thanks

Hi Carlos,
Make sure that:
1. you are running latest driver from intel on your laptop
2. use only AES encryption with WPA2. If TKIP is also selected. Uncheck it and leave only AES.
Cheers
Serge

Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

Hello,
I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
Any help would be greatly appreciated.

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

Transfer files from ipod touch to a PC with windows Vista

How do I transfer files from my ipod touch to my brand laptop with windows vista?

Hello and Welcome to  Discussions Forum.
If you have purchased songs from the iTunes Music Store, then those are pretty easy to transfer to your computer. You'll just need to follow [this instructions|http://docs.info.apple.com/article.html?artnum=305465].
All your other songs (for example, those ripped from your CD's), you'll need to use any 3rd party program to transfer them to your iTunes library!
Some can also transfer your playlists, videos, ratings, podcast...
*To use with iPod Touch/iPhone and other iPods:*
[iGadget|http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage] (Mac and Windows)
[iRepo|http://www.purpleghost.com/index.php?q=irepo] (Mac and Windows)
[iPod Access|http://www.findleydesigns.com/ipodaccess/index.html] (Mac and Windows)
*To use only with other iPods:*
[Media Widget|http://www.bootstrapdevelopment.com/showproduct.aspx?t=b#features] (Windows only)
[iDump|http://www.download.com/iDump/3000-2169_4-10407429.html] (Windows only)
[Senuti|http://www.fadingred.org/senuti> (Mac Only)
Hope this helps! If you still have doubts, please reply.
Best Regards,
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

Router WRT54GL with Windows Vista

Greetings,
We just bought two Dell E520 computers that will come pre loaded with Windows Vista OS. I also have a WRT54GL router still fresh in the box and un opened.
When we receive our new computers we want to use our new WRT54GL router with the two new desktops hard wired into the WRT54GL router.
Will the CD that came with this new router be able to run on Windows Vista?
If the CD will not run on Windows how should I go about setting up my two new computers to use the router?
I want to use these two new Dell E520 computers hard wired in to the new WRT54GL.
I have two laptops that are wireless capabel. I would like to use these two laptop computers in their wireless mode.
How do I go about setting up the new Dells that will be hard wired in to the WRT54GL modem if I cannot run the CD First on Window Vista as the instructions says that I should run the CD first before I plug in the two new Dell desktops into the router.
I hope these comments are clear and understandable. Please ask for more information if needed.
Thanks in advance for your help and understanding.
Leigh
Leigh

Thanks,
Can I use the Linksys CD that came with the router. On the CD it says Run CD First. Can this disk run on Windows Vista?
If not do I need to somewhere on Linksys site to download a new disk?
Thanks for your support and help.
Leigh

Strange Issue with windows Vista

Hello Friends,
My user is not able to connect Cisco 5400 with windows vista while the same user is able to connect via windows XP.Dialer settings for both the windows are same .I am using windows dialer for both windows.I am using PAP authentication protocol
below are the logs on cisco AS 5400 when its not connecting
ul 4 09:01:46 UTC: As2/01 LCP: ACFC (0x0802)
Jul 4 09:01:46 UTC: As2/01 LCP: State is Open
Jul 4 09:01:46 UTC: As2/01 PPP: Phase is AUTHENTICATING, by this end
Jul 4 09:01:47 UTC: As2/01 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x0BC0640B MSRASV5.20
Jul 4 09:01:47 UTC: As2/01 LCP: I IDENTIFY [Open] id 3 len 24 magic 0x0BC0640B MSRAS-0-IMRAN-PC
Jul 4 09:01:47 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid <<<<<<<<<<<<<<
Jul 4 09:01:48 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:01:50 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:01:52 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:01:54 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:01:56 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:01:56 UTC: As2/01 AUTH: Timeout 1
Jul 4 09:01:58 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:02:02 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Jul 4 09:02:04 UTC: As2/01 PAP: I UNKNOWN(12) id 3 len 24As2/01 PAP: Code 12 not expected or invalid
Thanks in Advance for help
Regards
Tarun

Should it be an ACS appliance, please do the following:
1. Set logging level to full:
System Configuration > Service Control > Services Log File
Configuration: Level of detail = FULL
2. Reproduce the problem
3. Note the time-stamp from the problem-reproduction
4. Collect Package.cab:
System Configuration > Support > Click on: "Run Support Now"
--> This will prompt you after a while to download Package.cab to your
local machine.
5. Upload Package.cab to SR notes along with the time-stamp of the
reproduction (step-3 above).

WRT54GS Compatible with Windows Vista?

Does anyone know if the WRT54GS Wireless Router is compatible with Windows Vista? I want to remove the router from a PC running XP and move to one using Vista. If it is compatible, I no longer have the start-up CD-ROM. Can the necessary drivers and firmware be found and downloaded from the Linksys site? Thanks.
Solved!
Go to Solution.

Vista works with the WRT54GS. You can simply remove the cable from your old computer and connect it to your new computer. If your new computer has a wireless adaptor, you can also connect wirelessly. You would have to log on to your router to find your network key.
Greetings from Northern Ontario, Canada

Oracle EBS with Windows vista

I recently brought HP laptop, which came with windows vista OS. I can't go back to XP. Drivers does not support any other OS.
Did any body try installing oracle apps version 11 down loaded from oracle site.
Please advise me!!!

Oracle E-Business Suite 11i/R12 is not yet certified on Microsoft Vista.
Certify - Oracle's Certification Matrices
http://www.oracle.com/technology/support/metalink/index.html
If you can manage to use VMware and install some other certified OS, it would be better.

SAP problem with Windows Vista

I have purchased a Laptop with Windows Vista OS having Internet explorer 7.0 and loaded SAP GUI 6.40 with patch 20. I am facing the following problems:
1. Not able to execute CJ20N transaction
2. Heirarchy reports are not showing column descriptions
3. Some standard reports are not able to be executed
4. Not able to get connected to my client thru Cisco VPN
5. Not able to reply in webmails
Also some times my system is taking lot of time to execute simple commands and shutdown.
Can anybody help me how to resolve these?
Thanks
Raghu

try this link:
https://smpdl.sap-ag.de/~swdc/012002523100000896772007E/50083078_4.ZIP?_ACTION=DL_DIRECT
if this does not work, try at http://www.sapsuperusers.com/forums/showthread.php?t=6088 but you will need to register on that website first.

Cisco Aironet Site Survey Utility with Windows Vista

Similar Messages

Maybe you are looking for