Cisco AnyConnect standalone .msi download

Hi guys,
I am trying to find the standalone .msi installer for the Cisco AnyConnect VPN client (v3.1.02026). I downloaded the .iso file which contains a file named
anyconnect-win-3.1.02026-pre-deploy-k9.msi, however that seems to install the mobility client.
Has Cisco phased out the older AnyConnect client (ie. http://www.boku.ac.at/fileadmin/_/H19/zid-services/netz/netzzugang/vpn/AnyConnect_bokuvpn.gif) in favour of the new mobility client?
I can only find a standalone .msi installer for v2.5.6005.

You need to download the .iso-file:

Similar Messages

  • Cisco anyconnect 3.1 download for windows 8.1

    I am trying to download and install anyconnect 3.1 for windows 8.1 but all I see is a pkg file for windows. windows does not recognize this pkg file
    how do I install anyconnect on 8.1?

    You need to download the .iso-file:

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • Configuration File goes bad in Cisco AnyConnect Secure Mobility Client.

    Hi everyone
    We are running a Cisco ISE Version: 1.3.0.876 Patch 1 for 802.1X deployment (Wired + Wireless) with posture assessment where the supplicant for the endpoint is Cisco Anyconnect Secure Mobility Client v4.0.00061.
    Symptoms:
    The Configuration is working fine both Wired and Wireless, but the issue is that some user suddenly start to have issue connecting Wireless with the Cisco Anyconnect dislpaying System Scan: Bypassing Anconnect Scan
    (Some info are masked)
    and When I digged into this found that the configuration.xml files in the path: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles is renamed automatically into configuration_bad.xml.
    Workaround:
    Copy and paste a normal configuration.xml into the same path again.
    Restart the Cisco anyconnect services or restart the Endpoint.
    Question:
    So was wondering if anybody has a clue why this configutatyion.xml turned into bad??
    I'm goin to dig into the Event Viewer for logs about this before going to Cisco TAC

    first poster -
    "Downloads from random internet sites are 5-10 times faster than anything from a server on the VPN."
    Your corporate network may just have too little bandwidth, your taking a poor internet route between carriers (ISP's are often maxed out believe it or not), there is a speed an duplex problem or you have a bad MTU. test all of them. your pc's MTU should be 1300. MAX on all interfaces. use the setmtu.exe tool.
    Jcohen - if you disable the IPS on the ASA does the slow transfer problem go away?

  • VPN issues after updating to Cisco AnyConnect 3.1.04072?

    Even after downloading the most recent version of Cisco Client 3.1.04072 (see below) I'm still getting a periodic disconnect and reconnect from my VPN client.  Issue only seems to occur when I'm connecting from outside my company's wi-fi network.  Happens on both my personal and on public wi-fi.  Is anyone else experiencing a similar issue?
    Changes in AnyConnect 3.1.04072 (and 3.1.04074)
    The Mac OS X versions of AnyConnect were updated to 3.1.04074 to resolve the problem of frequent disconnects of the AnyConnect VPN on systems running Mac OS X 10.9 (Mavericks). Apple is aware of this issue and you can reference Apple Bug Report ID 15261749 if you want to open your own case with them. AnyConnect 3.1.0474 also supports Mac OS X 10.8, 10.7 and 10.6.
    Once Apple provides a fix for OS X 10.9, we may choose to retract this workaround. At that time, both versions 3.1.04074 and 3.1.04072 of AnyConnect will work reliably with Mac OS X 10.9.
    Defect CSCui69769 was fixed by version 3.1.0704.
    AnyConnect 3.1.04072 is a maintenance release that resolves the defects described in Caveats Resolved by AnyConnect 3.1.04072 and is compatible with Host Scan Engine Update, 3.1.04075.

    Pete is right, I apparently don't know how to read version numbers!  I downloaded the 3.1.05152 version of Cisco AnyConnect, and I no longer experience the reconnect issue on Mavericks.  Yea!
    In my defense, there is no such version 3.1.04074 listed on the download page:
    http://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=28300018 5&flowid=17001&softwareid=282364313
    So I mistakenly downloaded 3.1.04072 in a moment of dyslexia.  I suspect I'm not the first person to come along and do this!
    PS:  You need a service contract with Cisco to download this file.  If you don't have one, and/or your IT administrator isn't able to provide you with one, you might try doing a google search for the actual filename:  anyconnect-macosx-i386-3.1.05152-k9.dmg.  If you go this route, at least compare the md5 checksum with the one listed on Cisco's website (it shows up if you hover your cursor over the file) to ensure you're not running a hacked VPN client.  For example, running "md5 anyconnect-macosx-i386-3.1.05152-k9.dmg" should produce a884f2092d08f006b2dc3a5054988f1c.  If it does not, it's not the same binary as on Cisco's downloads page so you probably don't want to run it.

  • Cisco Anyconnect Secure Mobility Client Fails to Install

    I've followed and contributed to posts about this problem here: https://supportforums.cisco.com/thread/2057631                  
    But this problem isn't only isolated to 2.5 client, so I thought a new discussion might attract a bit more attention and feedback.
    For 5 or 6 users when I try to install the client as new as version 3.0.11042 (any version, not just the newest) I get a failure:
    CustomAction VACon64_Install returned actual error code -536870348 (note this may not be 100% accurate if translation happened inside sandbox)
    Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
    MSI (s) (44:94) [16:15:05:629]: Product: Cisco AnyConnect VPN Client -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
    Before it rolls back, I try to run the command manually which appears to do something, but doesn't fix the problem.
    This is the step that is trying to install the service VPNVA, but it fails.
    I have cleaned up all the files I know how (which registry entries might I also try?) and rebooted several times, but no luck.
    The documented Cisco solution, and what i've been telling frustrated users one after another is "re-image your machine"
    Does someone have an idea of what else I can try?

    Thank you.
    The workaround works. Yes, using Windows 8.1.
    An HOW TO on how to set this for everyone who is not that computer savvy...
    1. Go to the Start Screen of Windows 8.1 and look for the Cisco Anyconnect Secure Mobility Client icon (or just type it on the Start Screen).
    2. Right click the icon and select 'Open file location'.
    3. Right click the Cisco Anyconnect Secure Mobility Client (Shortcut) and select 'Properties'
    4. Select the 'Compatibility' Tab.
    5. Check the box 'Run this program in compatibility mode for:' and select 'Windows 8' in the drop down.
    6. Click 'OK' to close the window.
    7. Log off and log on again (or reboot the computer).
    Note to point 5. If there are multiple users are using the PC with different user accounts and they're using the Cisco Secure Mobility Client as well, then go to 'Change settings for all users' and there apply point 5. To do so you'll need administrative rights to the computer though.

  • How do I use Cisco Anyconnect?

    I'm not sure if this is the right place for this.
    My work has provided Cisco Anyconnect to access their network. I'm able to download and install successfully but once I establish the connection, then what. I'm connected but nothing seems to happen. How do I actually access my works network? Do I need to connect to a server (Using Go/Connect to a server...)?
    Thanks

    All Anyconnect does is connect you to you work's network. Once you've established a connection, you should have access to work resources (servers, desktops, printers) by connecting to them as you would if you were at your office.
    If there are any special connection requirements to use your work resources, you would need to contact the I/T people at your workplace.

  • No Audio on either end Cisco Jabber for Windows over Cisco AnyConnect

    Our telephony staff is replacing our aging/unsupported VoIP system with a Cisco system and as the network tech, I'm trying to get Jabber for Windows to work over our AnyConnect VPN client.  Jabber to Cisco phone and Jabber to Jabber calls work fine within our LAN.  
    However, when I take a laptop to a separate internet connection and connect to the network via the VPN, I can't get any audio to pass across the system, in either direction.  If I call a phone on our LAN using the Jabber client (via AnyConnect), the phone rings and when I answer it, it's just dead air on both ends.  If I reverse the process, calling from the phone to the Jabber client, the same thing, Jabber client rings, but dead air both ways once I answer.  
    Things I can do from the laptop over the VPN connection:
    I'm able to get to the phone's web interface using that same laptop.
    I can ping the phone as well.  In fact, the VPN profile I'm using has full access to the entire VoIP Vlan including all IP traffic (all ~65,000 ports).
    Searching the address book also works fine.  I can search for staff and it's pulling directly from our Active Directory environment.
    Is there any special settings on the firewall that I need to setup to allow the voice traffic (which I assume is RTP traffic)?  I tried to add a service policy for RTP traffic, but that didn't seem to work...unless I built it wrong.
    Jabber for Windows - 10.6.0
    Cisco Anyconnect - 3.1.06079
    Cisco 5515-x ASA - 9.2

    I was able to resolve this on my own.  I thought that SIP traffic needed to be inspected via the global inspection policy in order for it to pass through the firewall. I ran into the same issue with ICMP traffic from an Anyconnect client to LAN devices. I had to enable ICMP in that policy for us to be able to ping LAN devices over the VPN tunnel. So when I saw that SIP was already being inspected by this policy, I moved on looking for other solutions. Then I stumbled deep within a Google search (almost hit the end of the Internet doing so) where someone mentioned that SIP shouldn’t be inspected by that policy. So I unchecked it and bam! Voice is now working over the anyconnect client to phones on the LAN. 

  • Setting up IPsec VPNs to use with Cisco Anyconnect

    So I've been having trouble setting up vpns on our ASA 5510. I would like to use IPsec VPNs so that we don't have to worry about licensing issues, but from what I've read you can do this with and still use Cisco Anyconnect. My knowledge on how to set up VPNs especially in iOS verion 8.4 is limited so I've been using a combination of command line and ASDM.
    I'm finally able to connect from a remote location but once I connect, nothing else works. From what I've read, you can use IPsec for client-to-lan connections. I've been using a preshared key for this. Documentation is limited on what should happen after you connect? Shouldn't I be able to access computers that are local to the vpn connection? I'm trying to set this up from work. If I VPN from home, shouldn't I be able to access all resources at work? I think because I've used the command line as well as ASDM I've confused some of the configuration. Plus I think some of the default policies are confusing me too. So I probably need a lot of help. Below is my current configuration with IP address altered and stuff that is completely non-related to vpns removed.
    NOTE: We are still testing this ASA and it isn't in production.
    Any help you can give me is much appreciated.
    ASA Version 8.4(2)
    hostname ASA
    domain-name domain.com
    interface Ethernet0/0
    nameif inside
    security-level 100
    ip address 192.168.0.1 255.255.255.0
    interface Ethernet0/1
    nameif outside
    security-level 0
    ip address 50.1.1.225 255.255.255.0
    interface Ethernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface Ethernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    no nameif
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    boot system disk0:/asa842-k8.bin
    ftp mode passive
    dns domain-lookup outside
    dns server-group DefaultDNS
    same-security-traffic permit intra-interface
    object network NETWORK_OBJ_192.168.0.224_27
    subnet 192.168.0.224 255.255.255.224
    object-group service VPN
    service-object esp
    service-object tcp destination eq ssh
    service-object tcp destination eq https
    service-object udp destination eq 443
    service-object udp destination eq isakmp
    access-list ips extended permit ip any any
    ip local pool VPNPool 192.168.0.225-192.168.0.250 mask 255.255.255.0
    no failover
    failover timeout -1
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-645.bin
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 no-proxy-arp route-lookup
    object network LAN
    nat (inside,outside) dynamic interface
    access-group outside_in in interface outside
    route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
    sysopt noproxyarp inside
    sysopt noproxyarp outside
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ca trustpoint ASDM_TrustPoint0
    enrollment self
    subject-name CN=ASA
    crl configure
    crypto ca server
    shutdown
    crypto ca certificate chain ASDM_TrustPoint0
    certificate d2c18c4e
        308201f3 3082015c a0030201 020204d2 c18c4e30 0d06092a 864886f7 0d010105
        0500303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
        f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
        6f6d301e 170d3131 31303036 31393133 31365a17 0d323131 30303331 39313331
        365a303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
        f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
        6f6d3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100b2
        8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
        37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
        234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c51782
        3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
        03010001 300d0609 2a864886 f70d0101 05050003 8181009d d2d4228d 381112a1
        cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
        18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
        beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
        af72e31f a1c4a892 d0acc618 888b53d1 9b888669 70e398
      quit
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside client-services port 443
    crypto ikev2 remote-access trustpoint ASDM_TrustPoint0
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 65535
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 10
    console timeout 0
    management-access inside
    ssl trust-point ASDM_TrustPoint0 outside
    webvpn
    enable outside
    anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
    anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
    anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
    anyconnect profiles VPN disk0:/devpn.xml
    anyconnect enable
    tunnel-group-list enable
    group-policy VPN internal
    group-policy VPN attributes
    wins-server value 50.1.1.17 50.1.1.18
    dns-server value 50.1.1.17 50.1.1.18
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client
    default-domain value digitalextremes.com
    webvpn
      anyconnect profiles value VPN type user
      always-on-vpn profile-setting
    username administrator password xxxxxxxxx encrypted privilege 15
    username VPN1 password xxxxxxxxx encrypted
    tunnel-group VPN type remote-access
    tunnel-group VPN general-attributes
    address-pool (inside) VPNPool
    address-pool VPNPool
    authorization-server-group LOCAL
    default-group-policy VPN
    tunnel-group VPN webvpn-attributes
    group-alias VPN enable
    tunnel-group VPN ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    class-map ips
    match access-list ips
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
      inspect http
    class ips
      ips inline fail-open
    class class-default
      user-statistics accounting

    Hi Marvin, thanks for the quick reply.
    It appears that we don't have Anyconnect Essentials.
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has an ASA 5510 Security Plus license.
    So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license?

  • Cisco AnyConnect SSL VPN no split tunnel and no hairpinning internet access

    Greetings,
    I am looking to configure a Cisco ASA 5515X for Cisco AnyConnect Essentials SSL VPN where ALL SSL-VPN traffic is tunneled, no split tunneling or hairpinning on the outside interface. However users require internet access. I need to route traffic out the "trusted" or "inside" interface to another device that performs content-filtering and inspection which then egresses out to the internet from there. Typically this could be done using a route-map (which ASA's do not support) or with a VRF (again, not an option on the ASA). The default route points to the outside interface toward the internet.
    Is there no other method to force all my SSL-VPN traffic out the inside interface toward LAN subnets as needed and have another default route point toward the filtering device?
    OR 
    Am I forced to put the ASA behind the filtering device somehow?

    Hi Jim,
    You can use tunnel default route for vpn traffic:
    ASA(config)# route inside 0.0.0.0 0.0.0.0 <inside hop> tunneled
    configure mode commands/options:
      <1-255>   Distance metric for this route, default is 1
      track     Install route depending on tracked item
      tunneled  Enable the default tunnel gateway option, metric is set to 255
    This route is applicable for only vpn traffic.
    HTH,
    Shetty

  • Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

    I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
    Go to "Regedit" and search for "Deterministic Networks" and delete it.
    HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
    Search with the following keywords in the registry, under "Uninstall" or  "Components" folders and delete any related entries.
    Vpnapi
    Vpngui
    Cisco
    CVPND
    CVPNDRA
    Ipsecdialer
    Source: https://supportforums.cisco.com/message/3728011#3728011
    But I've still got the same problem, and just cant find anything to help !

    Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
    Per Adapter:
    Click the Start button.
    Click on Control Panel.
    Click on View Network Status and Tasks
    Click on Change adapter settings
    Right-click the shared connection and choose Properties
    Click the Sharing tab
    Clear the Allow other network users to connect through this computer's Internet connection checkbox
    Click OK
    System Wide:
    Click the Start button (Windows' orb)
    Type: services.msc and press ENTER
    Double-Click on Internet Connection Sharing (ICS)
    Change Startup Type to Disabled
    Reboot the computer
    You can now try reinstalling the WiscVPN client again

  • Unable to unistall Cisco AnyConnect VPN - please help

    I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
    Please Help.
    Thanks,
    Mike

    Windows Event Log detail as follows:
    Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
    Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
    Exception code: 0xc0000005
    Fault offset: 0x00029132
    Faulting process id: 0x1e74
    Faulting application start time: 0x01d02328f37bd890
    Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
    Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
    Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
    Faulting package full name: 
    Faulting package-relative application ID: 

  • Cisco Anyconnect Secure Mobility Client crashes on Mac 10.8.5

    Hi,
    I have a Macbook Pro with Mountain Lion 10.8.5 OS installed. I am using Cisco Anyconnect Secure Mobility Client as a VPN to access my company's network (Intranet). Had been using this software for more than 2 Months and all of a sudden now when I use this Secure Mobility Client, the application is crashing and I get the following error message:
    Process:         Cisco AnyConnect Secure Mobility Client [1340]
    Path: /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Identifier: com.cisco.vpn
    Version:         3.0.10055
    Code Type:       X86 (Native)
    Parent Process: launchd [152]
    Date/Time: 2013-11-10 11:18:57.739 +0530
    OS Version:      Mac OS X 10.8.5 (12F45)
    Report Version:  10
    Interval Since Last Report:          6277 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Crashed Thread:  6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
    VM Regions Near 0x4:
    --> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
        __TEXT                 0000000000001000-0000000000025000 [  144K] r-x/rwx SM=COW  /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                 0x96fcf7ce mach_msg_trap + 10
    1 libsystem_kernel.dylib                 0x96fcecac mach_msg + 68
    2 com.apple.CoreFoundation         0x990e1f79 __CFRunLoopServiceMachPort + 185
    3 com.apple.CoreFoundation         0x990e795f __CFRunLoopRun + 1247
    4 com.apple.CoreFoundation         0x990e701a CFRunLoopRunSpecific + 378
    5 com.apple.CoreFoundation         0x990e6e8b CFRunLoopRunInMode + 123
    6 com.apple.HIToolbox                   0x97821f5a RunCurrentEventLoopInMode + 242
    7 com.apple.HIToolbox                   0x97821cc9 ReceiveNextEventCommon + 374
    8 com.apple.HIToolbox                   0x97821b44 BlockUntilNextEventMatchingListInMode + 88
    9 com.apple.AppKit                         0x91d9193a _DPSNextEvent + 724
    10 com.apple.AppKit                       0x91d9116c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    11 com.apple.AppKit                       0x91d875cc -[NSApplication run] + 855

    I have identical problem on 10.7.5 OS and AnyConnect 3.1.04074
    Just started happening yesterday.
    Please post if you find a solution.

  • Cisco AnyConnect WEB/SSL VPN - does not launch after Apple's security update on Mac OS 10.7 and 10.6

    AnyConnect version: 2.5.2001
    Mac OS versions: 10.7.2 and 10.6.8
    We used to invoke Cisco AnyConnect VPN via the Safari browser for the SSL URL and it used to work fine on Mac OS 10.6 and 10.7. Apple released a security update on 8/Nov/2011 (see: http://support.apple.com/kb/HT5045) and after applying the update, invoking AnyConnect from the browser no longer invokes the AnyConnect application on the machine. The browser stops at this page repeatedly:
    I have installed AnyConnect on my machine and am able to invoke it explicitly, but browser login just fails to do that. I have tried re-installing AnyConnect, but the problem still persists.
    Any help would be highly appreciated as we are in a show-stopped situation because of this issue.
    Thanks
    Vivek.

    This is an old issue, but I ran into it continually this month while trying to use AnyConnect on my Mac 10.8+ version.
    For me, the solution was:
    I realized that I should have seen a pop-up warning me about the dangers of using Java etc. etc but it seemed as if my computer was blocking it automatically without giving me the option.
    I went to the Java page (Java.com) and clicked on "Do I have Java?" The plug-in was inactive, so clicking it allowed me to check that my Java was up to date. Going back to my AnyConnect, this time, it seemed to go through and give me all the pop-ups allowing me to allow Java.

  • Issue with Cisco AnyConnect Secure Mobility Client in Macbook Pro

    Hi all,
    I am getting "No valid certificates available for uthentication" message while trying to connect Cisco AnyConnect VPN. I am having a valid certificate in Keychain Access. I couldn't find an option to import the certificate to the VPN. Please help.

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

Maybe you are looking for