Cisco AnyConnect WEB/SSL VPN - does not launch after Apple's security update on Mac OS 10.7 and 10.6

AnyConnect version: 2.5.2001
Mac OS versions: 10.7.2 and 10.6.8
We used to invoke Cisco AnyConnect VPN via the Safari browser for the SSL URL and it used to work fine on Mac OS 10.6 and 10.7. Apple released a security update on 8/Nov/2011 (see: http://support.apple.com/kb/HT5045) and after applying the update, invoking AnyConnect from the browser no longer invokes the AnyConnect application on the machine. The browser stops at this page repeatedly:
I have installed AnyConnect on my machine and am able to invoke it explicitly, but browser login just fails to do that. I have tried re-installing AnyConnect, but the problem still persists.
Any help would be highly appreciated as we are in a show-stopped situation because of this issue.
Thanks
Vivek.

This is an old issue, but I ran into it continually this month while trying to use AnyConnect on my Mac 10.8+ version.
For me, the solution was:
I realized that I should have seen a pop-up warning me about the dangers of using Java etc. etc but it seemed as if my computer was blocking it automatically without giving me the option.
I went to the Java page (Java.com) and clicked on "Do I have Java?" The plug-in was inactive, so clicking it allowed me to check that my Java was up to date. Going back to my AnyConnect, this time, it seemed to go through and give me all the pop-ups allowing me to allow Java.

Similar Messages

  • I have downloaded and installed Lion. iTunes does not launch when I connect it to my mac.

    Hi.... i have downloaded and installed Lion. iTunes does not launch when I connect it to my mac. The correct box is ticked in 'Summary'. Any ideas? Thx. The same thing happens with my ipad.

    Hi there Bry,
    If you want to be able with out it syncing automatically, you can disable the automatic syncing feature following the instructions in the article below.
    iTunes 11 for Mac: Require a prompt before automatic syncing
    http://support.apple.com/kb/PH12120
    Hope that helps,
    Griff W.

  • Help does not launch after upgrading from RH5 to RH7

    My problem is similar to CaroMe1's. Topics within chm files
    created using RH5 and integrated into our software product launch
    correctly when a Help button is clicked on a dialog. After
    upgrading to RH7, using the the same project files, chm files
    created using RH7 do not launch at all; that is, nothing happens
    when a Help button is clicked on any dialog.
    Thanks in advance for any advice!

    The .chm filename and the .xpj filename are the same.
    Sorry if I was swerving and incoherent! I probably shouldn't
    have posted after traveling and no sleep!
    Here is how I tested for the source of this problem:
    1. I created a .chm file using RH 5, integrated it into our
    product, clicked on the Help button on any of our dialogs, and the
    appropriate Help topic displayed.
    2. I created a .chm file using RH 7 (using the exact same
    project files as in the previous step), integrated it into our
    product, clicked on the Help button on any of our dialogs, and
    nothing happened. No topic, no Help. Nothing.
    Is that a better description of the problem? (I hope)
    Thanks again!

  • IPhoto does not launch after installed Maverick OS X

    I have many problem after I installed Maverick in my MacBook 2009. I can not launch iPhoto, my iPhone can not get wi-fi and I can only open 1 tab in Safari.
    iPhoto said "Your photo library is either in use by another application or has become unreadable.
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
    Please somebody can help me!!!!!!!!!!

    Hi and welcome to discussions. You have posted in the Tiger 10.4 forum, running Leopard 10.5 and have an issue with iPhoto. Maybe posting in the iPhoto forum area would get you faster responses.
    http://discussions.apple.com/category.jspa?categoryID=143

  • TS3274 iPad does not start after the latest software update

    After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

    If the reset doesn't work, force iPad into recovery mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Time Machine backup does not work after 10.7.2 update

    Hi,
    after updating to 10.7.2 time machine does not perform any backups on my time capsule (error-1). What can I do? Please help. Thanks.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Trend micro titamiun does not run after loading firfox 4 update

    updated to Firefox 4 and now trend micro titanium does not show that is is scanning for threats

    See https://support.mozilla.com/en-US/questions/817710

  • HT1338 Software Update does not show 10.8.5 Security Update 2014-002

    I continue to have Mac 10.8.5 updates which do not show in the App Store Software Update.  In the past it was always iTunes which didn't show.  Now it's this security update.  Why would Software Update not show these available updates?  Instead it shows Mavericks and such as available updates, but not the current available security update for my version of OS X.  I'm only aware an update exists because of online forums.  Is this a widespread issue that is affecting everyone on Mt Lion?

    Already tried that.  We set up iClound under a new user account and it did not work. 
    (We tested iCloud Mail with Apple Sr. support yesterday, in a new user account.  It did not work.  Note, iCloud via web access via Safari of course will work, accessible from any computer.  That is not computer-specific.  But iCloud mail would not work on my Mac, nor in the Mail app, even under a new test user account.  This was mentioned briefly in previous post above.)
    Regarding re-installing ML, Apple support have never suggested that.  They have only suggested moving my current data to a new user account, which as I mentioned is not realistic, and now with the new iCloud problem across any new user account, would not solve the problem.
    How do you mean to re-install ML?  Erase the HDD, reinstall ML, then restore from Time Machine? 
    I think Apple has not suggested that so far because they believe the problem is in the current Mac data, user account, and not in the system.  They have told me migrating to a new Mac or even to Mavericks probly would not solve the problem.  But now that it's a systemic issue with iCloud -- my previous issues with Software Update not working and appeared to be user account-specific, and still are – perhaps replacing the system software or upgrading to Mavericks will be worth considering.
    They are currently elevating my case to "engineering."  They will be looking at system data, I believe...
    It's incredibly frustrating.

  • Status light goes out and does not return after Apple TV is turned ON

    HI, my recently purchased and updated to the newest software Apple TV does not display the status light in front of the unit. For a couple of weeks everything worked fine until last night when I turned the unit back on. Normally soonest you select a HDMI output the status LED comes ON. That did not happen last night. The LED did not light up at all, no mater what I did. After several different attempts; reset, powering down, disconnecting from AC and unplugging HDMI did not help. Then, after I turned my television OFF, few minutes later the light came ON on it's own. What could be causing it. I just replaced this particular unit for failing to remember my Wi-Fi network several days ago. What is going on with the Apple TV's? Thanks for help.

    even i am also facing a similar problem. i have macbook air, ipad2, iphone4S and iphone5S and apple tv. i updated my iPhone 5S and ipad2 to ios8 where as iPhone 4s is still running on iOS 7.1.2. i updated my apple tv as well. when i connected apple tv to the same router as other devices, only iPhone 5s shows the option of airplay where as no other device is displaying it. i hv tried all other devices....changed the settings and rebooted and restarted each one of them but nothing doing. that makes me wonder is it a problem with the software update of apple tv as i can successfully connect my iphone5s but not other devices. apple tv was running very successfully till recent past, primarily before all these updates came. i hv successfully mirrored from my macbook air, iPad and iPhone 4s. but now nothing seems to be working. can anyone help me out pls

  • Ethernet will not connect after installing latest Security Update.

    I installed the latest security update, restarted my computer, and found that it now will not connect to the internet. I get the message "Could not find a PPPoE server". I have checked all of my settings, restarted the computer again, turned the modem off and on again, etc., but nothing helps. I know that there is nothing wrong with the modem and server because I am connected through the same DSL modem to this computer (a mac mini). It would seem that the security update has done something unhelpful! Any ideas?
    BTW, the ibook does not have a wireless card and I had not installed 2 earlier wireless updates. I only installed this one because it said "recommended for all users".
    iBook G4   Mac OS X (10.4.7)  

    Hello
    It seems that the update set your preferences to "use PPPOe" while you where using "TCP/IP".
    Go to "System Preferences" and enter the pane whose icon is named "Réseau" in french (maybe "Network" in english.
    Reset your settings to "TCP/IP".
    Yvan KOENIG (from FRANCE vendredi 22 septembre 2006 08:13:56)

  • Both iPhoto and Mac Mail not working after most recent security update

    Granted I wasn't there to see it happen but I think my mom's computer here is a bit fubar based on something having been changed on her computer prior to the last security update. My guess is that her friends who think they are 'helping' are actually causing some real problems but I'm here now so I'm just trying to fix it with what I can.
    Essentially neither her mail or iPhoto seems to be working. I've found a similar error message in other posts but what throws me for a loop is that, when I use the console log and look at the crash files for both applications, they are both telling me the exact same thing. Could they both be pulling the same file for use? I've already run the disk repair stuff, changed the permissions on the file and just about everything else I could think of - do I need to reinstall the application or perhaps the entire operating system?
    Link (dyld) error:
    Library not loaded: /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
    Referenced from: /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer: unknown file type, first eight bytes: 0x6D 0x65 0x00 0x00 0x69 0x73 0x46 0x69

    Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
    I managed to solve the stickies and TextEdit issues by removing Butler in the end.

  • G5 will not restart after installing latest Security Update

    I just installed latest Safari Security Update and now my computer will not restart. It will load my background then just spin and spin... with desktop never showing up and no control of computer. I have tried to repair disk but to no avail. HELP!

    Hi,
    Try Safe Boot Mac OS X
    What happens when you try to repair the disk? Are you booting from your restore disk while holding down the C key???
    Carolyn
    Message was edited by: Carolyn Samit

  • MAC WILL NOT REBOOT AFTER DOWNLOADING LATEST SECURITY UPDATE

    I downloaded the latest Security Update to my Mac Mini with Snow Leopard.  It downloaded but would not restart.  I finally managed to get it to boot to a bootable external drive and using Disk Utility found the HD was OK but the Preferences way out of wack.  I patched up what I could but when I tried restarting to the original drive it would not work.  I just get the white screen with a circle and stroke through it after a minute with the spinning ball.  I have tried the original start up Disk, pressing C on Startup, but it just spits it out.  I tried to use an older System Disk, one for Leopard but it will not see it.  I tried zapping the PRAM twice to no avail.  Now it won't see the bootable drive either.....
    To me it sound like a massive hard drive fail, maybe nothing to do with the Security update.  Your thoughts on this would be greatly appreciated though..... 
    Thanks,
    Stephen

    Hello
    It seems that the update set your preferences to "use PPPOe" while you where using "TCP/IP".
    Go to "System Preferences" and enter the pane whose icon is named "Réseau" in french (maybe "Network" in english.
    Reset your settings to "TCP/IP".
    Yvan KOENIG (from FRANCE vendredi 22 septembre 2006 08:13:56)

  • TextEdit and Stickies not working after most recent security update

    Hi,
    I recently installed security update 2007-009 (Universal) along with Java for Mac OS X 10.4 Release 6.
    Immediately afterwards I had real trouble with some third party apps such as Butler.app, as well as Stickies.
    The problem seemed to resolve itself, but it has come back with a vengeance tonight. Neither Stickies nor TextEdit will let me type beyond a few characters before "not responding". Butler has also not loaded.
    What is going on? And what can I do to use my most practical writing tools? This is incredibly frustrating.

    Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
    I managed to solve the stickies and TextEdit issues by removing Butler in the end.

  • Macbook not rebooting after most recent security update

    Hi
    My rather aged Macbook (1.1 I think) has not responded very well to the latest security update and is refusing to reboot, all I get is the grey screen. 
    Please help!!!

    Shut it down by holding the power button for five seconds. Then boot while holding the Command + S keys. Hold those keys until you see a black screen with text. Allow that screen to load completely then type fsck -yf and hit return. When you see "The disk has been modified" or "The disk appears to be okay" type reboot and hit return.

Maybe you are looking for