Cisco Anyconnect will not install correctly

I'm currently trying to install and run the Cisco Anyconnect Client on Windows 7 Professional 64bit, but during the installation process I get an error message stating that "There is a problem with the installer package. A program run as part of the setup did not finish as expected"
The setupapi log shows the following:-
flq: CopyFile: 'C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\acsock64.sys'
flq: to: 'C:\Windows\system32\DRIVERS\SET59A4.tmp'
flq: MoveFile: 'C:\Windows\system32\DRIVERS\SET59A4.tmp'
flq: to: 'C:\Windows\system32\DRIVERS\acsock64.sys'
!!! flq: MoveFile: FAILED!
!!! flq: Error 5: Access is denied.
! flq: Targetfile 'C:\Windows\system32\DRIVERS\acsock64.sys' marked to be moved from 'C:\Windows\system32\DRIVERS\SET59A4.tmp' on next reboot.
flq: MoveFile (delayed till reboot): 'C:\Windows\system32\DRIVERS\SET59A4.tmp'
flq: to: 'C:\Windows\system32\DRIVERS\acsock64.sys'
Could someone suggest what the cause of this might be and how I would resolve it?

Check the Application logs on the event viewer. There will be a section for "Cisco Anyconnect Moblity Client" under which you could see a possible reason for the installation failure.

Similar Messages

HT1349 itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

itune will not install correctly on my PC Error message reads "service 'apple mobile device' failed to start

Hello cynthialane,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best of luck,
Mario

ITunes will not install correctly on my PC with Windows 8. Any hints?

iTunes will not install correctly on my PC with Windows 8. Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates

Error code 31, Drivers will not install correctly

I am using the following NI PXI cards in a Chroma chassis:
8360
5112 or a 5114
7352 (I think)
I have a Toshiba laptop, Satellite L305D-S5934 running Vista, on which I am trying to install the driver package. Everything installs fine, with no errors. When I plug in the expresscard, turn on the chassis, and then boot the computer, the 8360 installs and is recognized in Device Manager and in MAX. The other two cards will not install. I get an error code 31 in device manager on the PCI-PCI/PXI bridge stating that Windows cannot load the driver.
I have another Toshiba laptop, Satellite L305D-S5895, which specs out about the same, also running Vista, which runs with no problems at all with the same card, cable, and chassis. Any previous experience with this issue? Thanks in advance for any timely help you can offer, and I'll gladly supply you folks with as much info as I can. Attached is a screen shot of the device manager with the flag and the error message.
-Kyle Jackson
Attachments:
DevMgr.jpg ‏141 KB

Hey Kyle,
It seems like the ExpressCard isn't working properly, based on what you've told me. You say that the ExpressCard shows up properly in Device Manager after installation, but based on that screenshot it looks like it isn't showing up correctly. Is there an NI-MXI entry in device manager after you install? Take a look at this : Developer Zone : What Laptops Have Been Tested with NI's ExpressCard-MXI for PXI and PXI Express?
In looking at this article, I don't see either of the two laptops you mentioned as ones we've tested or have had customer's test. That being said, there might be an issue with the S5934 and not with the S5895. I looked into it a bit more, and the two laptops have completely different chipsets, so it's reasonable to say that one laptop might work and one might not. There are a couple things you'll want to do to try and fix this:
First, make sure you have the most up-to-date BIOS for the S5934. If you still encounter errors, you might want to sign up for the beta program of the NI MXI Express Bios Compatibility Software, which might be able to solve any BIOS incompatibility problems. You can sign up at www.ni.com/beta for that software.
Justin E
National Instruments R&D

Elements Organizer will not install correctly

I recently installed the latest AAM per Adobe's suggestion to solve nother problem of "installer failed to initialize". Now I can run the Elements setup.exe withough the failure. However, when I try to install Elements (either Photoshop or Premiere), all that installs is the editor part. The organizer does not install correctly. In other words, when I open the program and click on organizer, nothing happens. How do I solve this issue? Rather than spend a bunch of time on this, can I manage my video files through Lightroom's catalog?
I'd prefer to get the Elements program running properly as my first option.
Thanks,
Brian

Brianbhood I would also ask that you please limit yourself to one discussion. From your previous posts it is no longer clear what version of Elements you are referring too. In addition there is another thread where you mentioned you were facing difficulties with Photoshop CS6 and Premiere CS6.
In regards to troubleshooting Elements installation issues please see Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html.

ITunes will not install correctly. error7 windows126

I have reinstalled apple itunes 5 times yesterday and nothing. It will not install without saying MSVCR80.dll is missing. Error7 (windows126) I ran a check and my computer has no missing or corrupt flies.
What next?

See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates

Itunes will not install correctly Error 7 Windows error 126 Problem is MSVCR 80 not found

Itunes will not install I get a error message ERROR 7 Windows error 126 When I try to open Itunes MSVCR80 Not found

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Itunes will not install correctly on my laptop, how do i solve this problem?

When I try to download iTunes on to my laptop I end up with the following message:
iTunes has not installed correctly. Please reinstall the programme.
Error 7 usually appears as well.
I need help!
CH

A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes

Your current updates are causing problems and will not install correctly how do we stop it

the security update you currently have causes problems with other software and does not install at all. Current corrections the entire pc has to be set back to a restore date to remove it

Hi;
I apologize about your not being able to reply to my response in the Payments sub-forum, thanks for re-posting here.
I forwarded your issue to a Support team that will take care of it. If you could send me a good contact phone # via email to [email protected] I will give that to the Support team so they have a few ways to contact you. Please also include the AdobeID for both accounts so they know what all to look at.
Thanks,
Josh

ITunes 10.5 will not install correctly

So iTunes decides not to install correctly now that 10.5 comes out. I'm unable to update my iPhone 4 to iOS5 and it's seriously ******* me off. I've tried nearly everything and nothing has come close. Right now the errors that I am getting are "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)". I've uninstalled and reinstalled iTunes about 50 times and that's not a joke, and I've also restarted my computer about the same amount of times. I've been searching the internet since the update came out and have tried every possibility and suggestion that people have said from people who have had the same trouble in the past. I don't know what to do.

My apologies everyone for the spelling errors in my previous post as I have a horrible habit of not doing spell check . So heres a better and hopefully less spelling mistaken riddled version hahaha...Hello All, Well I too was having a **** of a time upgrading my Itunes to 10.5 version on my Dell XPS Windows 7 64 bit laptop so that I could update my Iphone 3 GS. Ihave tried so many things (except for the kitchen sink) in the past 8 days my head is still spinning hahaha since IOS 5 was released to no avail...that is until today. So all you Windows 7 64 bit laptop users, sit up and listen carefully ( as my desktop had no issues updating to Itunes 10.5 forsome reason?, I willl try to figure that one out later) So what I did today was I downloaded the new Itunes 10.5 Windows 64 bit version (68MB I believe) and saved it to my HD. I then proceeded to CNET and downloaded a nifty and very excellent little program called Revo Uninstaller 1.93 (free version). So here's the steps to follow as to what I did and it worked flawlessly without even doing a restart of my system, As follows now OK: 1:) Download Revo Unistaller 1.93, 2:) Run the Revo exe file and then open it. It will then open a window and populate it with all the programs installed on your Windows 7 device. 3:) Look for the program icon called Apple Software Update and click on it, it will then highlight. 4:) Then at the top of the window of the Revo Unstaller program you will see an icon called uninstall with an X on it, click on that it will do a deep registry uninstall of ALL the Apple Update Software program with a 4 step instruction, follow those instructions. 5:) Then after the program runs another window will show a bunch of programs with some registry trees which are bolded. Check mark those bolded ones and select the delete button in the Revo Uninstaller window (lower right hand corner). After you are finished close the Revo Uninstaller program. 6:) Now go find your Itunes 10.5 exe file that you saved on your HD and run it, then presto...you should have Itunes10.5 loaded onto your Windows 7 device. Now plug in your Iphone (3 GS or later only) and or Ipad and it will automatically sync say that there is an update for your device. Follow the usual steps from there. It worked for me so let me know if this works for all you other WIndows 7 64 bit laptop users that were having these same issue as Dirky3301 and I were. As for me, I am now happier than a pigin s**t. Thanks everyone for reading this as I hope this wasn't to boring or to indepth? Off to play some RAGE now on my laptop hahahaha.
Message was edited by: thxdude3

Itunes will not install correctly

My itunes nwill not open on my pc. It says window error 7error 127. When i try to reinstall. It doesnt work.

Hey there veryorange1,
It sounds like you are unable to re install iTunes but it will not successfully install. I would recommend the troublehsooting steps in the following article to help get iTunes back onto your computer.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
All the very best,
Sterling

CS5 will not install correctly

Does anyone else have this problem and how do I fix it? I moved (shouldn't have done this!) CS5, as a trial, to my desktop by dragging it there on my mac so I could easily access it. I didn't realize it would make me lose some of the components. Now that I have purchased the program and am trying to install it I get this message "you can't open the application Adobe Photoshop CS5 because it may be damaged or incomplete"
Can anyone give me any advice?
Thanks!

When you restore the Photoshop.app back to the application folder, you will not get the error "....Components are missing." If you need a desktop shortcut for the application, make a alias on the application folder for Photoshop and drag the alias to desktop. This will not give the above error. If you are still not able to launch the product, please uninstall the previous installation before installing the licensed version. To uninstall go to Application folder>Utilities>Adobe Installers. From there run the icon for Photoshop. This will uninstall the product. If you see multiple icons, trash the rest. Then install the licensed version.

ITunes 11.1.4.62 will not install correctly after deleting the previous version

After being insessantly nagged to install the latest version of iTunes (11.1.4.62) I atempted to do so. I refuses to install correctly citing a problem with the remote device installer (?). Can I install the previous version? How do I get it?

Hello svt48,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Websites 2 Update 3 will not install correctly

When I try to configure the Management and File Server from my Controller server (either via the Web Interface, or in the Server Farms area in IIS) I get the following errors
Failed to run operation 'CheckCloudId (7.8.10699.5)'. Operation failed to complete.
Server SitesFS01 does not belong to web farm FileServers with cloud ID E40DA109-D5B3-4D93-8EFB-58B8A656B7F6, therefore no further operation will be performed.
Failed to run operation 'CheckCloudId (7.8.10699.5)'. Operation failed to complete.
Server SitesMN01 does not belong to web farm ManagementServers with cloud ID E40DA109-D5B3-4D93-8EFB-58B8A656B7F6, therefore no further operation will be performed.
I have tried restarting the servers and removing them and re-adding from the Server Farms in IIS but keep getting the same error.
This is with Websites v2 Update 3
Simon Holman
Expeed Technology
Australian Web Hosting

Ok, that resolved that issue but had led to another.
When I try to roll out the other roles, they all fail when trying to install the WebFarmAgent
I get the following error in the EventViewer of each server
Windows Installer installed the product. Product Name: Microsoft Web Farm Agent for Web Sites. Product Version: 7.8.5.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
Simon Holman
Expeed Technology
Australian Web Hosting

Jre-7u5-windows-x64 will not install correctly

When ever I try to install it it tells me to retry later, which I do, but it still doesn't work.
The correct name for this is: Java(TM) Update 5 (64-bit)

Is this not the same like the black screen on the iMac?
With the iMac, we had to remove the ati drivers in order to continue. The steps I did with the iMac are as follows:
35. Boot from the Win7 install DVD.
36. Click Next
37. Click Repair your Computer
38. Select "Restore your computer using a system image that you created earlier
39. Click Next
40. Click Cancel
41. Click Cancel
42. Click Command Prompt
43. > c:
44. cd c:\windows\system32\drivers\
45. del ati*
46. Close the command prompt
47. Click Restart
This time, Windows should successfully initialise a more appropriate display driver, allowing you into the desktop.

Cisco Anyconnect will not install correctly

Similar Messages

Maybe you are looking for