Cisco ASA 5505 can ping gateway but can't ping internet

Good day to all!
Sorry if I post this on the wrong group, I am having a bit of a problem on configuring an ASA 5505 firewall. And I scoured google but can't seem to find a specific link to my issues.
It is on a routed mode, have successfully configured inside and outside vlans. Hosts inside vlan can ping each other. Hosts on outside vlan can also ping each other. Problem is, when I am pinging 8.8.8.8, I received ????? Please see config below.
Any help greatly appreciated.
TIA!
: Saved
ASA Version 8.4(3)
hostname ciscoasan
enable password bD3fGYMFeJJTATOJ encrypted
passwd 2KF1w9ErdI.2KYOU encrypted
names
interface Ethernet0/0
 switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
 description INSIDE
 nameif inside
 security-level 100
 ip address 10.10.10.2 255.255.255.0
interface Vlan2
 description OUTSIDE
 nameif outside
 security-level 0
 ip address 203.127.68.2 255.255.255.240
ftp mode passive
object network obj_any
 subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit ip any any
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network obj_any
 nat (inside,outside) dynamic interface
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 203.127.68.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 10.10.10.0 255.255.255.0 inside
http authentication-certificate inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 10.10.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
 anyconnect-essentials
class-map inspection_default
 match default-inspection-traffic
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny  
  inspect sunrpc
  inspect xdmcp
  inspect sip  
  inspect netbios
  inspect tftp
  inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:6b3e0ce99eda3d2563cf9f392f8001b7
: end

Hi badingdong,
Remove these lines:
no nat (inside,outside) after-auto source dynamic any interface
no access-group outside_access_in in interface outside
If you have more inside subnets need access to internet, please make sure that you have a static route in place as shown below.
route inside 10.0.0.0 255.0.0.0 10.10.10.1
Also make sure that you have a correct DNS server is assigned on your internal hosts.
Thanks
Rizwan Rafeek

Similar Messages

  • ASA 5505 IPSEC VPN connected but can't access to LAN

    ASA : 8.2.5
    ASDM: 6.4.5
    LAN: 10.1.0.0/22
    VPN Pool: 172.16.10.0/24
    Hi, we purcahsed a new ASA 5505 and try to setup IPSEC VPN via ASDM; i just simply run the Wizards, setup vpnpool, split tunnelling,etc.
    I can connect to the ASA by using cisco VPN client and internet works fine on the local PC, but it cannot access to the LAN (can't ping. can't remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile i created worked fine.
    Below is my configure, do I mis-configure anything?
    ASA Version 8.2(5)
    hostname asatest
    domain-name XXX.com
    enable password 8Fw1QFqthX2n4uD3 encrypted
    passwd g9NiG6oUPjkYrHNt encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.1.1.253 255.255.252.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address XXX.XXX.XXX.XXX 255.255.255.240
    ftp mode passive
    clock timezone PST -8
    clock summer-time PDT recurring
    dns server-group DefaultDNS
    domain-name vff.com
    access-list vpntest_splitTunnelAcl standard permit 10.1.0.0 255.255.252.0
    access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.252.0 172.16.10.0 255.255.255.0
    pager lines 24
    logging enable
    logging timestamp
    logging trap warnings
    logging asdm informational
    logging device-id hostname
    logging host inside 10.1.1.230
    mtu inside 1500
    mtu outside 1500
    ip local pool vpnpool 172.16.10.1-172.16.10.254 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server AD protocol nt
    aaa-server AD (inside) host 10.1.1.108
    nt-auth-domain-controller 10.1.1.108
    http server enable
    http 10.1.0.0 255.255.252.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 10.1.0.0 255.255.252.0 inside
    ssh timeout 20
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy vpntest internal
    group-policy vpntest attributes
    wins-server value 10.1.1.108
    dns-server value 10.1.1.108
    vpn-tunnel-protocol IPSec l2tp-ipsec
    password-storage disable
    ip-comp disable
    re-xauth disable
    pfs disable
    ipsec-udp disable
    ipsec-udp-port 10000
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpntest_splitTunnelAcl
    default-domain value XXX.com
    split-tunnel-all-dns disable
    backup-servers keep-client-config
    address-pools value vpnpool
    username admin password WeiepwREwT66BhE9 encrypted privilege 15
    username user5 password yIWniWfceAUz1sUb encrypted privilege 5
    username user3 password umNHhJnO7McrLxNQ encrypted privilege 3
    tunnel-group vpntest type remote-access
    tunnel-group vpntest general-attributes
    address-pool vpnpool
    authentication-server-group AD
    authentication-server-group (inside) AD
    default-group-policy vpntest
    strip-realm
    tunnel-group vpntest ipsec-attributes
    pre-shared-key BEKey123456
    peer-id-validate nocheck
    privilege cmd level 3 mode exec command perfmon
    privilege cmd level 3 mode exec command ping
    privilege cmd level 3 mode exec command who
    privilege cmd level 3 mode exec command logging
    privilege cmd level 3 mode exec command failover
    privilege cmd level 3 mode exec command packet-tracer
    privilege show level 5 mode exec command import
    privilege show level 5 mode exec command running-config
    privilege show level 3 mode exec command reload
    privilege show level 3 mode exec command mode
    privilege show level 3 mode exec command firewall
    privilege show level 3 mode exec command asp
    privilege show level 3 mode exec command cpu
    privilege show level 3 mode exec command interface
    privilege show level 3 mode exec command clock
    privilege show level 3 mode exec command dns-hosts
    privilege show level 3 mode exec command access-list
    privilege show level 3 mode exec command logging
    privilege show level 3 mode exec command vlan
    privilege show level 3 mode exec command ip
    privilege show level 3 mode exec command ipv6
    privilege show level 3 mode exec command failover
    privilege show level 3 mode exec command asdm
    privilege show level 3 mode exec command arp
    privilege show level 3 mode exec command route
    privilege show level 3 mode exec command ospf
    privilege show level 3 mode exec command aaa-server
    privilege show level 3 mode exec command aaa
    privilege show level 3 mode exec command eigrp
    privilege show level 3 mode exec command crypto
    privilege show level 3 mode exec command vpn-sessiondb
    privilege show level 3 mode exec command ssh
    privilege show level 3 mode exec command dhcpd
    privilege show level 3 mode exec command vpnclient
    privilege show level 3 mode exec command vpn
    privilege show level 3 mode exec command blocks
    privilege show level 3 mode exec command wccp
    privilege show level 3 mode exec command dynamic-filter
    privilege show level 3 mode exec command webvpn
    privilege show level 3 mode exec command module
    privilege show level 3 mode exec command uauth
    privilege show level 3 mode exec command compression
    privilege show level 3 mode configure command interface
    privilege show level 3 mode configure command clock
    privilege show level 3 mode configure command access-list
    privilege show level 3 mode configure command logging
    privilege show level 3 mode configure command ip
    privilege show level 3 mode configure command failover
    privilege show level 5 mode configure command asdm
    privilege show level 3 mode configure command arp
    privilege show level 3 mode configure command route
    privilege show level 3 mode configure command aaa-server
    privilege show level 3 mode configure command aaa
    privilege show level 3 mode configure command crypto
    privilege show level 3 mode configure command ssh
    privilege show level 3 mode configure command dhcpd
    privilege show level 5 mode configure command privilege
    privilege clear level 3 mode exec command dns-hosts
    privilege clear level 3 mode exec command logging
    privilege clear level 3 mode exec command arp
    privilege clear level 3 mode exec command aaa-server
    privilege clear level 3 mode exec command crypto
    privilege clear level 3 mode exec command dynamic-filter
    privilege cmd level 3 mode configure command failover
    privilege clear level 3 mode configure command logging
    privilege clear level 3 mode configure command arp
    privilege clear level 3 mode configure command crypto
    privilege clear level 3 mode configure command aaa-server
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
    : end

    I change  a Machine's gateway to this ASA and capture again, now we can see some reply.
    All ohter PCs and switches gateway are point to another ASA, maybe that's the reason why i didn't work?
    what's the recommanded way to make our LAN to have two 2 gateways(for load balance or backup router, etc)?
    add two gateways to all PCs and swtichwes?
    1: 18:15:48.307875 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       2: 18:15:49.777685 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       3: 18:15:51.377147 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       4: 18:15:57.445777 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       5: 18:15:58.856324 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       6: 18:16:00.395090 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       7: 18:16:06.483464 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       8: 18:16:08.082805 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
       9: 18:16:09.542406 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 68
      10: 18:16:20.640424 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      11: 18:16:20.642193 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      12: 18:16:21.169607 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      13: 18:16:21.171210 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      14: 18:16:22.179556 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      15: 18:16:22.181142 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      16: 18:16:23.237673 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.230: icmp: echo request
      17: 18:16:23.239291 802.1Q vlan#1 P0 10.1.1.230 > 172.16.10.1: icmp: echo reply
      18: 18:16:27.676402 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      19: 18:16:29.246935 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      20: 18:16:30.676921 802.1Q vlan#1 P0 172.16.10.1.137 > 10.1.1.108.137:  udp 50
      21: 18:16:49.539660 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      22: 18:16:54.952602 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request
      23: 18:17:04.511463 802.1Q vlan#1 P0 172.16.10.1 > 10.1.1.233: icmp: echo request

  • Cisco ASA 5505 and Airport Extreme

    We have an office that uses an Airport Extreme as part of the network. The Airport Extreme uses a Cisco ASA 5505 as its gateway. The Cisco provides site to site VPN capabilities with other remote offices. We just got this configuration partially working and it works great for outbound connections.
    But I have been unable to get an inbound connection to machines that are behind the Airport Extreme.
    The goal is to access machines behind the Airport Extreme by way of RDP and also for use as drive and printer shares.
    What do I need to do on the Airport to achieve this goal?
    Thank you,
    Lebby

    Lebby,
    I suspect it's not the AX that's the problem but the Cisco router, no doubt you have NAT enabled on that so that any inbound connection not initiated from inside just get's blocked.
    You'll need to configure NAT on the Cisco first.
    Regards,
    Shawn

  • CISCO ASA 5505 bandwidth Controll and split

    Dear All,
    Below am giving the infrastructure which i like to do please help me.
    I Am Using Cisco ASA 5505 VPN Firewall and 6Mbps 1:1 dedicated internet connection.
    in Lan Side we have 3 networks one for Internet Users one For VPN Users One for CCTV
    i would like to split the 6Mbps bandwidth for these network 3 networks 3x2 each
    each network use 2Mbps bandwidth. The VPN and CCTV Users use up to 6:00 pm after that the bandwidth will be free
    after the 6:00 pm we need to use the the VPN and CCTV line bandwidth to the internet Users.
    Cisco Adaptive Security Appliance Software Version 7.2(4)
    Device Manager Version 5.2(4)
    Compiled on Sun 06-Apr-08 13:39 by builders
    System image file is "disk0:/asa724-k8.bin"
    so please help me with suitable configuration for my purpose./please tell me which device will support for this/what is have to do for this.  
    Thanks 
    Lalu R.S

    There's not much of that sort of functionality built into the ASA 5505 entry level firewall. To do that sort of thing in the firewall, you would have to move up to one of the newer 5500-X series with next generation firewall features and build a policy using Application Visibility and Control (AVC).
    You can do some crude controls with QoS - the configuration guide chapter on doing that is here.

  • Cisco ASA 5505 - Can't Login from Public & Local IP Anymore!

    Hello,
    We've a Cisco ASA 5505 connected directly to Verizon FiOS Circuit (ONT) box using Ethernet cable. As per the existing documention that I have, the previous configured this as a dedicated router to establish a seperate VPN connection our software provider. They assigned both Public Static and Local Static IP address. When I try to ping the public IP address, it says request time out; so the public IP address is no longer working.
    When I ping the local IP address of 192.168.100.11, it responds. The SolarWind tool also shows Always UP signal. How can I login into this router either from remotely or locally to check the configuration, backup and do the fimrware upgrade?
    I also tried to connect my laptop directly to the ASA 5505 router LAN port. After 3 minutes, I'm able to connect to Internet without any issues. However I don't know the IP address to use to login.
    Any advice would be greatly appreciated. Thank you.
    UPDATE: I'm able to find the way! I need to use https to login! I'm able to download ASDM tool and login! Thanks to these resources:
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
    http://cyruslab.wordpress.com/2010/09/09/how-to-download-asdm-from-asa5505-and-install-it/

    Hi Srinath,
    If that ASA5505 has factory-default configuration on it , then it probably has 192.168.1.1 ip address on the LAN side and has got dhcp server turned on to provide you ip address dynamically the moment you hook up a machine to it directly or through a switch.
    If you've access to ASDM.
    You can go the Configuration Tab>>Device Management>>Device Access and turn on the SSH & Telnet from the LAN interface because by default only HTTPS/ASDM is enabled on LAN interface.
    You will still need to generate crypto keys and create a username in order to get ssh working
    For this you can click at the TOP at TOOLS>> Command Line Interface.
    And in the box below type this
    crypto key generate rsa modulus 1024
    add a username
    username <> password <> priv 15
    and enable aaa authentication for ssh like this
    aaa authentication ssh console LOCAL
    Let me know if this helps.
    Puneet

  • Unable to access/lan2lan ping from VPN Fortigate to Cisco ASA 5505

    Problem : Unable to access user A to user B
    User A --- router A (122, fortigate 80c) --- (Site to Site VPN between fortigate & cisco asa) --- router B (93, cisco Asa 5505{in front asa got cisco800[81] before to internet} )  --- User B
    After using wizard to configure the cisco ASA site to site VPN, the site-to-site tunnel is up.
    Ping is unsuccessful from user A to user B
    Ping is successful from user B to user A, data is accessable
    After done the packet tracer from user A to user B,
    Result :
    Flow-lookup
    Action : allow
    Info: Found no matching flow, creating a new flow
    Route-lookup
    Action : allow
    Info : 192.168.5.203 255.255.255.255 identity
    Access-list
    Action : drop
    Config Implicit Rule
    Result - The packet is dropped
    Input Interface : inside
    Output Interface : NP Identify Ifc
    Info: (acl-drop)flow is denied by configured rule
    Below is Cisco ASA 5505's show running-config
    ASA Version 8.2(1)
    hostname Asite
    domain-name ssms1.com
    enable password ZZZZ encrypted
    passwd WWWW encrypted
    names
    name 82 B-firewall description Singapore office firewall
    name 192.168.1.0 B-inside-subnet description Singapore office internal LAN IP
    name 192.168.200.0 A-inside-VLAN12 description A-inside-VLAN12 (fortinet)
    name 192.168.2.0 fw-inside-subnet description A office internal LAN IP
    name 122 A-forti
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.5.203 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 93 255.255.255.240
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/7
    ftp mode passive
    dns server-group DefaultDNS
    domain-name ssms1.com
    object-group network obj_any
    network-object 0.0.0.0 0.0.0.0
    access-list inside_nat0_outbound extended permit ip any 80 255.255.255.240
    access-list inside_nat0_outbound extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
    access-list inside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
    access-list outside_cryptomap extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
    access-list Outside_nat-inbound extended permit ip A-inside-VLAN12 255.255.255.0 192.168.5.0 255.255.255.0
    access-list Outside_nat-inbound extended permit ip host A-forti 192.168.5.0 255.255.255.0
    access-list outside_1_cryptomap extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-631.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 101 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 101 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 81 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http B-inside-subnet 255.255.255.0 inside
    http fw-inside-subnet 255.255.255.0 inside
    http 0.0.0.0 255.255.255.255 outside
    http 0.0.0.0 0.0.0.0 outside
    http 192.168.5.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set pfs
    crypto map outside_map 1 set peer A-forti
    crypto map outside_map 1 set transform-set ESP-3DES-SHA
    crypto map outside_map 2 match address outside_cryptomap
    crypto map outside_map 2 set peer B-firewall
    crypto map outside_map 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 20
    authentication pre-share
    encryption aes-192
    hash md5
    group 2
    lifetime 86400
    crypto isakmp policy 30
    authentication pre-share
    encryption aes-256
    hash md5
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 192.168.5.10-192.168.5.20 inside
    dhcpd dns 165 165 interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy DfltGrpPolicy attributes
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    username admin password XXX encrypted privilege 15
    tunnel-group 122 type ipsec-l2l
    tunnel-group 122 ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    class-map outside-class
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
      message-length maximum client auto
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect icmp
    policy-map outside-policy
    description ok
    class outside-class
      inspect dns
      inspect esmtp
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect icmp
      inspect icmp error
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect sip
      inspect skinny
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect xdmcp
    service-policy global_policy global
    service-policy outside-policy interface outside
    prompt hostname context
    Cryptochecksum: XXX
    : end
    Kindly need your expertise&help to solve the problem

    any1 can help me ?

  • Unable to ping device behind Cisco 3750 on the same inside VLAN via Cisco ASA 5505 Anyconnect VPN

    Hi Guys,
    I've been stuck with this for the last 2 days, and I thought to try and use Cisco's forum, I setup my home DC, and started having problems once I moved a Cisco 5505 behind a Cisco 1841 router (I wanted to eventually test DMVPN live on the internet,) I was no longer able to ping some devices, then as soon as I introduce a collapsed core/distribution switch, I'm also no longer able to ping the devices behind the Cisco 3750, I've attached a network diagram and the ASA running-config.
    Everything seem fine internally with the exception of an intermittent network connectivity with a Citrix NetScaler VPX running on a VMware ESXi.
    For some odd reason, I am able to ping the following, with no issues.
    Cisco 3750 SVI (192.168.1.3)
    CentOS web server (connected directly to the Cisco ASA 5505)
    I have checked and enable the following:
    Nat Exemption
    Sysopt connection permit-vpn
    ACL's
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    Added ICMP in the inspection policy
    Packet-capture - Only getting echo requests.
    Thanks in advance!

    Hi,
    I believe you have the problem with your no-nat configurations..... you to exempt NAT for the traffic from 172.16.10.0 (Anyconnect VPN pool) to 192.168.1.0/24 (Inside LAN) to make this work
    object network acvpnpool
    subnet <anyconnect VPN Subnet>
    object network insidelan
    subnet <inside lan subnet>
    nat (inside,outside) source static acvpnpool acvpnpool destination static insidelan insidelan
    Make sure that you are able to reach the GW/Inside ip adress of the firewall from LAN machine.... all routing in place properly..... Thanks!!!
    Regards
    Karthik

  • Cisco ASA 5505 configuration

    Hi,
    I have configured cisco ASA 5505 but I can't get access to internet using my laptop connected to the ASA. I did not use the console but the graphical interface for the configuration. I changed the inside adress of the ASA and it is 192.168.2.1. From the inside I can't ping the material in outside and from outside I can't ping the laptop connected to the ASA.
    Here is my configuration:
    Result of the command: "show running-config"
    : Saved
    ASA Version 8.2(5)
    hostname xxxxxxxxxxxxxxxxx
    domain-name xxxxxxxxxxxxxxxxxxx
    enable password xxxxxxxxxxxxxx encrypted
    passwd xxxxxxxxxxxxxxxxxxxx encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.2.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 192.168.1.48 255.255.255.0
    ftp mode passive
    dns server-group DefaultDNS
    domain-name processia.com
    access-list outside_access_in extended permit ip any any
    access-list icmp_out_in extended permit icmp any any
    access-list inside_access_in extended permit ip any any
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ipv6 access-list outside_access_ipv6_in permit ip any any
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    access-group inside_access_in in interface inside
    access-group icmp_out_in in interface outside
    access-group outside_access_ipv6_in in interface outside
    route outside 0.0.0.0 0.0.0.0 192.168.1.48 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    http 192.168.2.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 192.168.2.2-192.168.2.129 inside
    dhcpd dns 80.10.246.2 80.10.246.129 interface inside
    dhcpd ping_timeout 5000 interface inside
    dhcpd domain xxxxxxxxxxxxxxxxx interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    policy-map global_policy
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:7e6f35db321b722ca60009b0c0dc706e
    : end
    Thank you for your help

    Hi Sylla,
    The static route you have configured for Internet access needs to be corrected:
    route outside 0.0.0.0 0.0.0.0 192.168.1.48 1
    The next hop address should be your ISP's gateway IP address and not the ASA's outside interface IP. Currently, both are configured for 192.168.1.48.
    -Mike

  • Setting up site to site vpn with cisco asa 5505

    I have a cisco asa 5505 that needs to be set up for site to site vpn to a cisco asa 5500. The 5505 is the remote office and the 5500 is the main office.
    IP of remote office router is 71.37.178.142
    IP of the main office firewall is 209.117.141.82
    Can someone tell me if my config is correct, this is the first time I am setting this up and it can not be tested until I set it up at the remote office. I would rather know its correct before I go.
    ciscoasa# show run
    : Saved
    ASA Version 7.2(4)
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password TMACBloMlcBsq1kp encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
    access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 host 209.117.141.82
    access-list inside_nat0_outbound extended permit ip host 71.37.178.142 host 209.117.141.82
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-524.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set pfs group5
    crypto map outside_map 1 set peer 209.117.141.82
    crypto map outside_map 1 set transform-set ESP-AES-256-SHA
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption aes-256
    hash sha
    group 5
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    vpdn username [email protected] password ********* store-local
    dhcpd auto_config outside
    dhcpd address 192.168.1.2-192.168.1.129 inside
    dhcpd enable inside
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:7e338fb2bf32a9ceb89560b314a5ef6c
    : end
    ciscoasa#
    Thanks!

    Hi Mandy,
    By using following access list define Peer IP as source and destination
    access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
    you are not defining the interesting traffic / subnets from both ends.
    Make some number ACL 101 as you do not have to write the extended keyword then if you like as follows, or else NAME aCL will also work:
    access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
    access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
    access-list 101 remark CCP_ACL Category=4 access-list 101 remark IPSEC Rule
    !.1..source subnet(called local encryption domain) at your end  192.168.200.0
    !..2.and destination subnet(called remote encryption domain)at other end 192.168.100.0 !.3..I mean you have to define what subnets you need to communicate between which are behind these firewalls
    !..4...Local Subnets behind IP of the main office firewall is 209.117.141.82 say
    !...at your end  192.168.200.0
    !..5.Remote Subnets behind IP of remote office router is 71.37.178.142 say
    !...at other end 192.168.100.0
    Please use Baisc Steps as follows:
    A. Configuration in your MAIN office  having IP = 209.117.141.82  (follow step 1 to 6)
    Step 1.
    Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
    access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
    Step 2.
    Config ISAKMP Policy with minimum 4 parameters are to be config for
    crypto isakmp policy 10
    authentication pre-share  ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
    encryption aes-256   --->2nd parameter of ISAKMP Policy is OK
    hash sha   --->  3rd parameter of ISAKMP Policy is OK
    group 5  --->  4th parameter of ISAKMP Policy is OK
    lifetime 86400  ------ >  this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
    Step 3.
    Define Preshared key or PKI which you will use with other side Peer address 71.37.178.142, either key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
    Here in your case in step 2 Authentication is using PSK, looks you have not defines Password
    Use following command:
    crypto isakmp key 0 CISCO123 address 71.37.178.142
    or , but not both
    crypto isakmp key 6 CISCO123 address71.37.178.142
    step 4.
    Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
    Here is yours one:
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
    crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
    or
    crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
    Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
    ah-sha-hmac or  ah-md5-hmac
    crypto ipsec transform-set TSET1 ah-sha-hmac
    or
    crypto ipsec transform-set TSET1 ah-md5-hmac
    Step 5.
    Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
    crypto map ipsec-isakmp
    1. Define peer -- called WHO to set tunnel with
    2. Define or call WHICH - Transform Set
    3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
    Like in your case it is but ipsec-isakmp keyword missing in the ;ast
    crypto map outside_map 10 ipsec-isakmp
    1. set peer 209.117.141.82  -----> is correct as this is your other side peer called WHO in my step
    2. set transform-set TSET1  -----> is correct as this is WHICH, and only one transform set can be called
    !..In you case it is correct
    !...set transform-set ESP-AES-256-SHA (also correct)
    3.  match address outside_1_cryptomap  ---->Name of the extended ACL define as WHAT to pass through this tunnel
    4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
    Step 6.
    Now apply this one crypto MAP to your OUTSIDE interface always
    interface outside
    crypto map outside_map
    Configure the same but just change ACL on other end in step one  by reversing source and destination
    and also set the peer IP of this router in other end.
    So other side config should look as follows:
    B.  Configuration in oyur Remote PEER IP having IP = 71.37.178.142 (follow step 7 to 12)
    Step 7.
    Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
    access-list outside_1_cryptomap extended ip 192.168.100.0 0.0.0.255 192.168.200.0 0.0.0.255
    Step 8.
    Config ISAKMP Policy with minimum 4 parameters are to be config for
    crypto isakmp policy 10
    authentication pre-share  ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
    encryption aes-256   --->2nd parameter of ISAKMP Policy is OK
    hash sha   --->  3rd parameter of ISAKMP Policy is OK
    group 5  --->  4th parameter of ISAKMP Policy is OK
    lifetime 86400  ------ >  this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
    Step 9.
    Define Preshared key or PKI which you will use with other side Peer address key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
    Here in your case in step 8 Authentication is using PSK, looks you have not defines Password
    Use following command:
    crypto isakmp key 0 CISCO123 address 209.117.141.82
    or , but not both
    crypto isakmp key 6 CISCO123 address 209.117.141.82
    step 10.
    Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
    Here is yours one:
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
    crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
    or
    crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
    Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
    ah-sha-hmac or  ah-md5-hmac
    crypto ipsec transform-set TSET1 ah-sha-hmac
    or
    crypto ipsec transform-set TSET1 ah-md5-hmac
    Step 11.
    Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
    crypto map    ipsec-isakmp
    1. Define peer -- called WHO to set tunnel with
    2. Define or call WHICH - Transform Set, only one is permissible
    3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
    Like in your case it is but ipsec-isakmp keyword missing in the ;ast
    crypto map outside_map 10 ipsec-isakmp
    1. set peer 209.117.141.82  -----> is correct as this is your other side peer called WHO in my step
    2. set transform-set TSET1  -----> is correct as this is WHICH, and only one transform set can be called
    !..In you case it is correct
    !...set transform-set ESP-AES-256-SHA (also correct)
    3.  match address outside_1_cryptomap  ---->Name of the extended ACL define as WHAT to pass through this tunnel
    4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
    Step 12.
    Now apply this one crypto MAP to your OUTSIDE interface always
    interface outside
    crypto map outside_map
    Now initite a ping
    Here is for your summary:
    IPSec: Site to Site - Routers
    Configuration Steps
    Phase 1
    Step 1: Configure Mirrored ACL/Crypto ACL       for Interesting Traffic
    Step 2: Configure ISAKMP Policy
    Step 3: Configure ISAKMP Key
    Phase 2
    Step 4: Configure Transform Set
    Step 5: Configure Crypto Map
    Step 6: Apply Crypto Map to an Interface
    To debug for Phase 1 and Phase 2. Store it in buffer without displaying logs on terminal.
    Router#debug crpyto isakmp
    Router#debug crpyto ipsec
    Router(config)# logging buffer 7
    Router(config)# logging buffer 99999
    Router(config)# logging console 6
    Router# clear logging
    Configuration
    In R1:
    (config)# access-list 101 permit ipo host 10.1.1.1 host      10.1.2.1
    (config)# crypto isakmp policy 10
    (config-policy)# encryption 3des
    (config-policy)# authentication pre-share
    (config-policy)# group 2
    (config-policy)# hash sha1
    (config)# crypto isakmp key 0 cisco address 2.2.2.1
    (config)# crypto ipsec transform-set TSET esp-3des      sha-aes-hmac
    (config)# crypto map CMAP 10 ipsec-isakmp
    (config-crypto-map)# set peer 2.2.2.1
    (config-crypto-map)# match address 101
    (config-crypto-map)# set transform-set TSET
    (config)# int f0/0
    (config-if)# crypto map CMAP
    Similarly in R2
    Verification Commands
    #show crypto isakmp SA
    #show crypto ipsec SA
    Change to Transport Mode, add the following command in Step 4:
    (config-tranform-set)# mode transport
    Even after  doing this change, the ipsec negotiation will still be done through  tunnel mode if pinged from Loopback to Loopback. To overcome this we  make changes to ACL.
    Change to Aggressive Mode, replace the Step 3 command with these commands in R1:
    (config)# crypto isakmp peer address 2.2.2.1
    (config-peer)# set aggressive-mode password cisco
    (config-peer)# set aggressive-mode clien-endpoint       ipv4-address 2.2.2.1
    Similarly on R2.
    The below process is for the negotiation using RSA-SIG (PKI) as authentication type
    Debug Process:
    After  we debug, we can see the negotiation between the two peers. The first  packet of the interesting traffic triggers the ISAKMP (Phase1)  negotiation. Important messages are marked in BOLD and explanation in  RED
    R2(config)#do ping 10.1.1.1 so lo0 // Interesting Traffic
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
    Packet sent with a source address of 2.2.2.2
    Mar  2 16:18:42.939: ISAKMP:(0): SA request profile is (NULL) //  Router tried to find any IPSec SA matching the outgoing connection but  no valid SA has been found in Security Association Database (SADB)
    Mar  2 16:18:42.939: ISAKMP: Created a peer struct for 20.1.1.10, peer port 500
    Mar  2 16:18:42.939: ISAKMP: New peer created peer = 0x46519678 peer_handle = 0x8000000D
    Mar  2 16:18:42.939: ISAKMP: Locking peer struct 0x46519678, refcount 1 for isakmp_initiator
    Mar  2 16:18:42.939: ISAKMP: local port 500, remote port 500
    Mar  2 16:18:42.939: ISAKMP: set new node 0 to QM_IDLE    
    Mar  2 16:18:42.939: ISAKMP:(0):insert sa successfully sa = 4542B818
    Mar  2 16:18:42.939: ISAKMP:(0):Can not start Aggressive mode, trying Main mode. // Not an error. By default it is configured for Main Mode
    Mar  2 16:18:42.939: ISAKMP:(0):No pre-shared key with 20.1.1.10! // Since we are using RSA Signature, this message. If we use pre-share, this is where it would indicate so!
    Mar  2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
    Mar  2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-07 ID
    Mar  2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-03 ID
    Mar  2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-02 ID
    Mar  2 16:18:42.939: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    Mar  2 16:18:42.939: ISAKMP:(0):Old State = IKE_READY  New State = IKE_I_MM1
    Mar  2 16:18:42.943: ISAKMP:(0): beginning Main Mode exchange
    Mar  2 16:18:42.943: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_NO_STATE // Sending ISAKMP Policy to peer
    Mar  2 16:18:42.943: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Mar  2 16:18:42.943: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_NO_STATE // Sending ISAKMP Policy to peer
    Mar  2 16:18:42.947: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Mar  2 16:18:42.947: ISAKMP:(0):Old State = IKE_I_MM1  New State = IKE_I_MM2
    Mar  2 16:18:42.947: ISAKMP:(0): processing SA payload. message ID = 0
    Mar  2 16:18:42.947: ISAKMP:(0): processing vendor id payload
    Mar  2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch // Do not worry about this! Not an ERROR!
    Mar  2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
    Mar  2 16:18:42.947:.!!!!
    Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms
    R2(config)# ISAKMP:(0): processing vendor id payload
    Mar  2 16:18:42.947: ISAKMP:(0): processing IKE frag vendor id payload
    Mar  2 16:18:42.947: ISAKMP:(0):Support for IKE Fragmentation not enabled
    Mar  2 16:18:42.947: ISAKMP : Scanning profiles for xauth ...
    Mar  2 16:18:42.947: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
    Mar  2 16:18:42.947: ISAKMP:      encryption 3DES-CBC
    Mar  2 16:18:42.947: ISAKMP:      hash SHA
    Mar  2 16:18:42.947: ISAKMP:      default group 2
    Mar  2 16:18:42.947: ISAKMP:      auth RSA sig
    Mar  2 16:18:42.947: ISAKMP:      life type in seconds
    Mar  2 16:18:42.947: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
    Mar  2 16:18:42.947: ISAKMP:(0):atts are acceptable. Next payload is 0
    Mar  2 16:18:42.947: ISAKMP:(0):Acceptable atts:actual life: 0
    Mar  2 16:18:42.947: ISAKMP:(0):Acceptable atts:life: 0
    Mar  2 16:18:42.947: ISAKMP:(0):Fill atts in sa vpi_length:4
    Mar  2 16:18:42.947: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
    Mar  2 16:18:42.947: ISAKMP:(0):Returning Actual lifetime: 86400
    Mar  2 16:18:42.947: ISAKMP:(0)::Started lifetime timer: 86400.
    Mar  2 16:18:42.947: ISAKMP:(0): processing vendor id payload
    Mar  2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
    Mar  2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
    Mar  2 16:18:42.947: ISAKMP:(0): processing vendor id payload
    Mar  2 16:18:42.951: ISAKMP:(0): processing IKE frag vendor id payload
    Mar  2 16:18:42.951: ISAKMP:(0):Support for IKE Fragmentation not enabled
    Mar  2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Mar  2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM2
    Mar  2 16:18:42.951: ISAKMP (0): constructing CERT_REQ for issuer cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
    Mar  2 16:18:42.951: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_SA_SETUP // Sending Key Exchange Information to peer
    Mar  2 16:18:42.951: ISAKMP:(0):Sending an IKE IPv4 Packet.
    Mar  2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    Mar  2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2  New State = IKE_I_MM3
    Mar  2 16:18:42.955: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_SA_SETUP // Receive key exchange information from peer
    Mar  2 16:18:42.955: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Mar  2 16:18:42.955: ISAKMP:(0):Old State = IKE_I_MM3  New State = IKE_I_MM4
    Mar  2 16:18:42.959: ISAKMP:(0): processing KE payload. message ID = 0
    Mar  2 16:18:43.003: ISAKMP:(0): processing NONCE payload. message ID = 0
    Mar  2 16:18:43.007: ISAKMP:(1008): processing CERT_REQ payload. message ID = 0
    Mar  2 16:18:43.007: ISAKMP:(1008): peer wants a CT_X509_SIGNATURE cert
    Mar  2 16:18:43.007: ISAKMP:(1008): peer wants cert issued by cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
    Mar  2 16:18:43.007:  Choosing trustpoint CA_Server as issuer
    Mar  2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
    Mar  2 16:18:43.007: ISAKMP:(1008): vendor ID is Unity
    Mar  2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
    Mar  2 16:18:43.007: ISAKMP:(1008): vendor ID seems Unity/DPD but major 180 mismatch
    Mar  2 16:18:43.007: ISAKMP:(1008): vendor ID is XAUTH
    Mar  2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
    Mar  2 16:18:43.007: ISAKMP:(1008): speaking to another IOS box!
    Mar  2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
    Mar  2 16:18:43.007: ISAKMP:(1008):vendor ID seems Unity/DPD but hash mismatch
    Mar  2 16:18:43.007: ISAKMP:received payload type 20
    Mar  2 16:18:43.007: ISAKMP (1008): His hash no match - this node outside NAT
    Mar  2 16:18:43.007: ISAKMP:received payload type 20
    Mar  2 16:18:43.007: ISAKMP (1008): No NAT Found for self or peer
    Mar  2 16:18:43.007: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Mar  2 16:18:43.007: ISAKMP:(1008):Old State = IKE_I_MM4  New State = IKE_I_MM4
    Mar  2 16:18:43.011: ISAKMP:(1008):Send initial contact
    Mar  2 16:18:43.011: ISAKMP:(1008):My ID configured as IPv4 Addr, but Addr not in Cert!
    Mar  2 16:18:43.011: ISAKMP:(1008):Using FQDN as My ID
    Mar  2 16:18:43.011: ISAKMP:(1008):SA is doing RSA signature authentication using id type ID_FQDN
    Mar  2 16:18:43.011: ISAKMP (1008): ID payload
              next-payload : 6
              type         : 2
              FQDN name    : R2
              protocol     : 17
              port         : 500
              length       : 10
    Mar  2 16:18:43.011: ISAKMP:(1008):Total payload length: 10
    Mar  2 16:18:43.019: ISAKMP (1008): constructing CERT payload for hostname=R2+serialNumber=FHK1502F2H8
    Mar  2 16:18:43.019: ISAKMP:(1008): using the CA_Server trustpoint's keypair to sign
    Mar  2 16:18:43.035: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    Mar  2 16:18:43.035: ISAKMP:(1008):Sending an IKE IPv4 Packet.
    Mar  2 16:18:43.035: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    Mar  2 16:18:43.035: ISAKMP:(1008):Old State = IKE_I_MM4  New State = IKE_I_MM5
    Mar  2 16:18:43.047: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_KEY_EXCH
    // "MM_KEY_EXCH" indicates that the peers have exchanged DH Public keys and generated a shared secret!
    Mar  2 16:18:43.047: ISAKMP:(1008): processing ID payload. message ID = 0
    Mar  2 16:18:43.047: ISAKMP (1008): ID payload
              next-payload : 6
              type         : 2
              FQDN name    : ASA1
              protocol     : 0
              port         : 0
              length       : 12
    Mar  2 16:18:43.047: ISAKMP:(0):: peer matches *none* of the profiles // Normal Message! Not an error!
    Mar  2 16:18:43.047: ISAKMP:(1008): processing CERT payload. message ID = 0
    Mar  2 16:18:43.047: ISAKMP:(1008): processing a CT_X509_SIGNATURE cert
    Mar  2 16:18:43.051: ISAKMP:(1008): peer's pubkey isn't cached
    Mar  2 16:18:43.059: ISAKMP:(1008): Unable to get DN from certificate!
    Mar  2 16:18:43.059: ISAKMP:(1008): Cert presented by peer contains no OU field.
    Mar  2 16:18:43.059: ISAKMP:(0):: peer matches *none* of the profiles
    Mar  2 16:18:43.063: ISAKMP:(1008): processing SIG payload. message ID = 0
    Mar  2 16:18:43.067: ISAKMP:received payload type 17
    Mar  2 16:18:43.067: ISAKMP:(1008): processing vendor id payload
    Mar  2 16:18:43.067: ISAKMP:(1008): vendor ID is DPD
    Mar  2 16:18:43.067: ISAKMP:(1008):SA authentication status:
              authenticated
    Mar  2 16:18:43.067: ISAKMP:(1008):SA has been authenticated with 20.1.1.10
    Mar  2 16:18:43.067: ISAKMP: Trying to insert a peer 40.1.1.1/20.1.1.10/500/,  and inserted successfully 46519678. // SA inserted into SADB
    Mar  2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Mar  2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM5  New State = IKE_I_MM6
    Mar  2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Mar  2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM6  New State = IKE_I_MM6
    Mar  2 16:18:43.071: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    Mar  2 16:18:43.071: ISAKMP:(1008):Old State = IKE_I_MM6  New State = IKE_P1_COMPLETE
    Mar  2 16:18:43.071: ISAKMP:(1008):beginning Quick Mode exchange, M-ID of -1523793378
    Mar  2 16:18:43.071: ISAKMP:(1008):QM Initiator gets spi
    Mar  2 16:18:43.075: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE    
    Mar  2 16:18:43.075: ISAKMP:(1008):Sending an IKE IPv4 Packet.
    Mar  2 16:18:43.075: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_INTERNAL, IKE_INIT_QM
    Mar  2 16:18:43.075: ISAKMP:(1008):Old State = IKE_QM_READY  New State = IKE_QM_I_QM1
    Mar  2 16:18:43.075: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
    Mar  2 16:18:43.075: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    Mar  2 16:18:43.079: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) QM_IDLE // IPSec Policies
    Mar  2 16:18:43.079: ISAKMP:(1008): processing HASH payload. message ID = -1523793378
    Mar  2 16:18:43.079: ISAKMP:(1008): processing SA payload. message ID = -1523793378
    Mar  2 16:18:43.079: ISAKMP:(1008):Checking IPSec proposal 1
    Mar  2 16:18:43.079: ISAKMP: transform 1, ESP_3DES
    Mar  2 16:18:43.079: ISAKMP:   attributes in transform:
    Mar  2 16:18:43.079: ISAKMP:      SA life type in seconds
    Mar  2 16:18:43.079: ISAKMP:      SA life duration (basic) of 3600
    Mar  2 16:18:43.079: ISAKMP:      SA life type in kilobytes
    Mar  2 16:18:43.079: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
    Mar  2 16:18:43.079: ISAKMP:      encaps is 1 (Tunnel)
    Mar  2 16:18:43.079: ISAKMP:      authenticator is HMAC-SHA
    Mar  2 16:18:43.079: ISAKMP:(1008):atts are acceptable. // IPSec attributes are acceptable!
    Mar  2 16:18:43.079: ISAKMP:(1008): processing NONCE payload. message ID = -1523793378
    Mar  2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
    Mar  2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
    Mar  2 16:18:43.083: ISAKMP:(1008): Creating IPSec SAs
    Mar  2 16:18:43.083:         inbound SA from 20.1.1.10 to 40.1.1.1 (f/i)  0/ 0
              (proxy 1.1.1.1 to 2.2.2.2)
    Mar  2 16:18:43.083:         has spi 0xA9A66D46 and conn_id 0
    Mar  2 16:18:43.083:         lifetime of 3600 seconds
    Mar  2 16:18:43.083:         lifetime of 4608000 kilobytes
    Mar  2 16:18:43.083:         outbound SA from 40.1.1.1 to 20.1.1.10 (f/i) 0/0
              (proxy 2.2.2.2 to 1.1.1.1)
    Mar  2 16:18:43.083:         has spi  0x2B367FB4 and conn_id 0
    Mar  2 16:18:43.083:         lifetime of 3600 seconds
    Mar  2 16:18:43.083:         lifetime of 4608000 kilobytes
    Mar  2 16:18:43.083: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE    
    Mar  2 16:18:43.083: ISAKMP:(1008):Sending an IKE IPv4 Packet.
    Mar  2 16:18:43.083: ISAKMP:(1008):deleting node -1523793378 error FALSE reason "No Error"
    Mar  2 16:18:43.083: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
    Mar  2 16:18:43.083: ISAKMP:(1008):Old State = IKE_QM_I_QM1  New State = IKE_QM_PHASE2_COMPLETE // At this point tunnels are up and ready to pass traffic!
    Verification Commands
    #show crypto isakmp SA
    #show crypto ipsec SA
    Kindly rate if you find the explanation useful !!
    Best Regards
    Sachin Garg

  • Cisco ASA 5505 Site to Site VPN

    Hello All,
    First time posting to the forums. I've been working with Cisco ASA 5505 for a number of months and recently I purchased a 2nd ASA with the goal of setting up Site to Site VPN tunnel. It look so simple from the number of videos that I have watched on the internet. But when I have done it suprise suprise it didn't work for me ... I have deleted the tunnels a number of times and attempted to recreate them. I am using the VPN wizard in the ADM to create the tunnel. Both the asa are 5505 and have the same same firmware etc.
    I would appreciate any help that can be directed towards this issue please.  Slowly losing my mind
    Please see details below:
    Both ADM are 7.1
    IOS
    ASA 1
    aved
    ASA Version 9.0(1)
    hostname PAYBACK
    enable password HSMurh79NVmatjY0 encrypted
    xlate per-session deny tcp any4 any4
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    ip local pool VPN1 192.168.50.1-192.168.50.254 mask 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    speed 100
    duplex full
    interface Ethernet0/1
    description Trunk link to SW1
    switchport trunk allowed vlan 1,10,20,30,40
    switchport trunk native vlan 1
    switchport mode trunk
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    no nameif
    no security-level
    no ip address
    interface Vlan2
    nameif outside
    security-level 0
    ip address 92.51.193.158 255.255.255.252
    interface Vlan10
    nameif inside
    security-level 100
    ip address 192.168.10.1 255.255.255.0
    interface Vlan20
    nameif servers
    security-level 100
    ip address 192.168.20.1 255.255.255.0
    interface Vlan30
    nameif printers
    security-level 100
    ip address 192.168.30.1 255.255.255.0
    interface Vlan40
    nameif wireless
    security-level 100
    ip address 192.168.40.1 255.255.255.0
    banner login line Welcome to Payback Loyalty Systems
    boot system disk0:/asa901-k8.bin
    ftp mode passive
    clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup outside
    dns domain-lookup inside
    dns domain-lookup servers
    dns domain-lookup printers
    dns domain-lookup wireless
    dns server-group DefaultDNS
    name-server 83.147.160.2
    name-server 83.147.160.130
    same-security-traffic permit inter-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network ftp_server
    object network Internal_Report_Server
    host 192.168.20.21
    description Automated Report Server Internal Address
    object network Report_Server
    host 89.234.126.9
    description Automated Report Server
    object service RDP
    service tcp destination eq 3389
    description RDP to Server
    object network Host_QA_Server
    host 89.234.126.10
    description QA Host External Address
    object network Internal_Host_QA
    host 192.168.20.22
    description Host of VM machine for QA
    object network Internal_QA_Web_Server
    host 192.168.20.23
    description Web Server in QA environment
    object network Web_Server_QA_VM
    host 89.234.126.11
    description Web server in QA environment
    object service SQL_Server
    service tcp destination eq 1433
    object network Demo_Server
    host 89.234.126.12
    description Server set up to Demo Product
    object network Internal_Demo_Server
    host 192.168.20.24
    description Internal IP Address of Demo Server
    object network NETWORK_OBJ_192.168.20.0_24
    subnet 192.168.20.0 255.255.255.0
    object network NETWORK_OBJ_192.168.50.0_26
    subnet 192.168.50.0 255.255.255.192
    object network NETWORK_OBJ_192.168.0.0_16
    subnet 192.168.0.0 255.255.0.0
    object service MSSQL
    service tcp destination eq 1434
    description MSSQL port
    object network VPN-network
    subnet 192.168.50.0 255.255.255.0
    object network NETWORK_OBJ_192.168.50.0_24
    subnet 192.168.50.0 255.255.255.0
    object service TS
    service tcp destination eq 4400
    object service TS_Return
    service tcp source eq 4400
    object network External_QA_3
    host 89.234.126.13
    object network Internal_QA_3
    host 192.168.20.25
    object network Dev_WebServer
    host 192.168.20.27
    object network External_Dev_Web
    host 89.234.126.14
    object network CIX_Subnet
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.10.0_24
    subnet 192.168.10.0 255.255.255.0
    object network NETWORK_OBJ_84.39.233.50
    host 84.39.233.50
    object network NETWORK_OBJ_92.51.193.158
    host 92.51.193.158
    object network NETWORK_OBJ_192.168.100.0_24
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object-group service DM_INLINE_SERVICE_1
    service-object tcp destination eq ftp
    service-object tcp destination eq netbios-ssn
    service-object tcp destination eq smtp
    service-object object TS
    object-group network Payback_Internal
    network-object 192.168.10.0 255.255.255.0
    network-object 192.168.20.0 255.255.255.0
    network-object 192.168.40.0 255.255.255.0
    object-group service DM_INLINE_SERVICE_3
    service-object tcp destination eq www
    service-object tcp destination eq https
    service-object object TS
    service-object object TS_Return
    object-group service DM_INLINE_SERVICE_4
    service-object object RDP
    service-object tcp destination eq www
    service-object tcp destination eq https
    object-group service DM_INLINE_SERVICE_5
    service-object object MSSQL
    service-object object RDP
    service-object object TS
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group service DM_INLINE_SERVICE_6
    service-object object TS
    service-object object TS_Return
    service-object tcp destination eq www
    service-object tcp destination eq https
    access-list outside_access_in remark This rule is allowing from internet to interal server.
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark FTP
    access-list outside_access_in remark RDP
    access-list outside_access_in remark SMTP
    access-list outside_access_in remark Net Bios
    access-list outside_access_in remark SQL
    access-list outside_access_in remark TS - 4400
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any4 object Internal_Report_Server
    access-list outside_access_in remark Access rule to internal host QA
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark HTTP
    access-list outside_access_in remark RDP
    access-list outside_access_in extended permit tcp any4 object Internal_Host_QA eq www
    access-list outside_access_in remark Access to INternal Web Server:
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark HTTP
    access-list outside_access_in remark RDP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 any4 object Internal_QA_Web_Server
    access-list outside_access_in remark Rule for allowing access to Demo server
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark RDP
    access-list outside_access_in remark MSSQL
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any4 object Internal_Demo_Server
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
    access-list outside_access_in remark Access for Development WebServer
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
    access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
    access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
    access-list AnyConnect_Client_Local_Print remark Windows' printing port
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
    access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
    access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
    access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
    access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
    access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
    access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
    access-list Payback_VPN_splitTunnelAcl standard permit 192.168.20.0 255.255.255.0
    access-list outside_cryptomap extended permit ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0
    pager lines 24
    logging enable
    logging console informational
    logging asdm informational
    logging from-address
    [email protected]
    logging recipient-address
    [email protected]
    level alerts
    mtu outside 1500
    mtu inside 1500
    mtu servers 1500
    mtu printers 1500
    mtu wireless 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-711-52.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside) source dynamic any interface
    nat (wireless,outside) source dynamic any interface
    nat (servers,outside) source dynamic any interface
    nat (servers,outside) source static Internal_Report_Server Report_Server
    nat (servers,outside) source static Internal_Host_QA Host_QA_Server
    nat (servers,outside) source static Internal_QA_Web_Server Web_Server_QA_VM
    nat (servers,outside) source static Internal_Demo_Server Demo_Server
    nat (servers,outside) source static NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 destination static NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 no-proxy-arp route-lookup
    nat (servers,outside) source static Internal_QA_3 External_QA_3
    nat (servers,outside) source static Dev_WebServer External_Dev_Web
    nat (inside,outside) source static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 no-proxy-arp route-lookup
    nat (inside,outside) source static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.10.0 255.255.255.0 inside
    http 192.168.40.0 255.255.255.0 wireless
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec security-association pmtu-aging infinite
    crypto map outside_map 1 match address outside_cryptomap
    crypto map outside_map 1 set pfs
    crypto map outside_map 1 set peer 84.39.233.50
    crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map outside_map interface outside
    crypto ca trustpool policy
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside client-services port 443
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 77.75.100.208 255.255.255.240 outside
    ssh 192.168.10.0 255.255.255.0 inside
    ssh 192.168.40.0 255.255.255.0 wireless
    ssh timeout 5
    console timeout 0
    dhcpd dns 192.168.0.1
    dhcpd auto_config outside
    dhcpd address 192.168.10.21-192.168.10.240 inside
    dhcpd dns 192.168.20.21 83.147.160.2 interface inside
    dhcpd option 15 ascii paybackloyalty.com interface inside
    dhcpd enable inside
    dhcpd address 192.168.40.21-192.168.40.240 wireless
    dhcpd dns 192.168.20.21 83.147.160.2 interface wireless
    dhcpd update dns interface wireless
    dhcpd option 15 ascii paybackloyalty.com interface wireless
    dhcpd enable wireless
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    group-policy Payback_VPN internal
    group-policy Payback_VPN attributes
    vpn-simultaneous-logins 10
    vpn-tunnel-protocol ikev1
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value Payback_VPN_splitTunnelAcl
    group-policy DfltGrpPolicy attributes
    dns-server value 83.147.160.2 83.147.160.130
    vpn-tunnel-protocol ikev1 ikev2 ssl-clientless
    group-policy GroupPolicy_84.39.233.50 internal
    group-policy GroupPolicy_84.39.233.50 attributes
    vpn-tunnel-protocol ikev1 ikev2
    username Noelle password XB/IpvYaATP.2QYm encrypted
    username Noelle attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Eanna password vXILR9ZZQIsd1Naw encrypted privilege 0
    username Eanna attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Michael password qpbleUqUEchRrgQX encrypted
    username Michael attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Danny password .7fEXdzESUk6S/cC encrypted privilege 0
    username Danny attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Aileen password tytrelqvV5VRX2pz encrypted privilege 0
    username Aileen attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Aidan password aDu6YH0V5XaxpEPg encrypted privilege 0
    username Aidan attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
    username shane.c password iqGMoWOnfO6YKXbw encrypted
    username shane.c attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Shane password uYePLcrFadO9pBZx encrypted
    username Shane attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username James password TdYPv1pvld/hPM0d encrypted
    username James attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username mark password yruxpddqfyNb.qFn encrypted
    username mark attributes
    service-type admin
    username Mary password XND5FTEiyu1L1zFD encrypted
    username Mary attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Massimo password vs65MMo4rM0l4rVu encrypted privilege 0
    username Massimo attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    tunnel-group Payback_VPN type remote-access
    tunnel-group Payback_VPN general-attributes
    address-pool VPN1
    default-group-policy Payback_VPN
    tunnel-group Payback_VPN ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group 84.39.233.50 type ipsec-l2l
    tunnel-group 84.39.233.50 general-attributes
    default-group-policy GroupPolicy_84.39.233.50
    tunnel-group 84.39.233.50 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 local-authentication pre-shared-key *****
    class-map global-class
    match default-inspection-traffic
    policy-map global-policy
    class global-class
      inspect dns
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect pptp
      inspect rsh
      inspect rtsp
      inspect sip
      inspect snmp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect xdmcp
      inspect icmp error
      inspect icmp
    service-policy global-policy global
    smtp-server 192.168.20.21
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1
    ASA 2
    ASA Version 9.0(1)
    hostname Payback-CIX
    enable password HSMurh79NVmatjY0 encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    speed 100
    duplex full
    interface Ethernet0/1
    description This port connects to VLAN 100
    switchport access vlan 100
    interface Ethernet0/2
    interface Ethernet0/3
    switchport access vlan 100
    interface Ethernet0/4
    switchport access vlan 100
    interface Ethernet0/5
    switchport access vlan 100
    interface Ethernet0/6
    switchport access vlan 100
    interface Ethernet0/7
    switchport access vlan 100
    interface Vlan2
    nameif outside
    security-level 0
    ip address 84.39.233.50 255.255.255.240
    interface Vlan100
    nameif inside
    security-level 100
    ip address 192.168.100.1 255.255.255.0
    banner login line Welcome to Payback Loyalty - CIX
    ftp mode passive
    clock summer-time gmt/idt recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup outside
    dns domain-lookup inside
    dns server-group defaultDNS
    name-server 8.8.8.8
    name-server 8.8.4.4
    same-security-traffic permit inter-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network CIX-Host-1
    host 192.168.100.2
    description This is the host machine of the VM servers
    object network External_CIX-Host-1
    host 84.39.233.51
    description This is the external IP address of the host server for the VM server
    object service RDP
    service tcp source range 1 65535 destination eq 3389
    object network Payback_Office
    host 92.51.193.158
    object service MSQL
    service tcp destination eq 1433
    object network Development_OLTP
    host 192.168.100.10
    description VM for Eiresoft
    object network External_Development_OLTP
    host 84.39.233.52
    description This is the external IP address for the VM for Eiresoft
    object network Eiresoft
    host 146.66.160.70
    description DBA Contractor
    object network External_TMC_Web
    host 84.39.233.53
    description Public Address of TMC Webserver
    object network TMC_Webserver
    host 192.168.100.19
    description Internal Address of TMC Webserver
    object network External_TMC_OLTP
    host 84.39.233.54
    description Targets OLTP external IP
    object network TMC_OLTP
    host 192.168.100.18
    description Targets interal IP address
    object network External_OLTP_Failover
    host 84.39.233.55
    description Public IP of OLTP Failover
    object network OLTP_Failover
    host 192.168.100.60
    description Server for OLTP failover
    object network Servers
    subnet 192.168.20.0 255.255.255.0
    object network Wired
    subnet 192.168.10.0 255.255.255.0
    object network Wireless
    subnet 192.168.40.0 255.255.255.0
    object network NETWORK_OBJ_192.168.100.0_24
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.10.0_24
    subnet 192.168.10.0 255.255.255.0
    object network Eiresoft_2nd
    host 137.117.217.29
    description Eiresoft 2nd IP
    object network Dev_Test_Webserver
    host 192.168.100.12
    description Dev Test Webserver Internal Address
    object network External_Dev_Test_Webserver
    host 84.39.233.56
    description This is the PB Dev Test Webserver
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object-group service DM_INLINE_SERVICE_1
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_2
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_3
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_4
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    object-group service DM_INLINE_SERVICE_5
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    object-group service DM_INLINE_SERVICE_6
    service-object object MSQL
    service-object object RDP
    object-group network Payback_Intrernal
    network-object object Servers
    network-object object Wired
    network-object object Wireless
    object-group service DM_INLINE_SERVICE_7
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_8
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_9
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_10
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    object-group service DM_INLINE_SERVICE_11
    service-object object RDP
    service-object tcp destination eq ftp
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-Host-1
    access-list outside_access_in remark Development OLTP from Payback Office
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP
    access-list outside_access_in remark Access for Eiresoft
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver
    access-list outside_access_in remark Access to OLTP for target from Payback Office
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover
    access-list outside_access_in remark This is allowing access from Eiresoft to the OLTP Failover server
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover
    access-list outside_access_in remark Access for the 2nd IP from Eiresoft
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP
    access-list outside_access_in remark Access from the 2nd Eiresoft IP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP
    access-list outside_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.10.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside) source dynamic any interface
    nat (inside,outside) source static CIX-Host-1 External_CIX-Host-1
    nat (inside,outside) source static Development_OLTP External_Development_OLTP
    nat (inside,outside) source static TMC_Webserver External_TMC_Web
    nat (inside,outside) source static TMC_OLTP External_TMC_OLTP
    nat (inside,outside) source static OLTP_Failover External_OLTP_Failover
    nat (inside,outside) source static Dev_Test_Webserver External_Dev_Test_Webserver
    nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 no-proxy-arp route-lookup
    nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 no-proxy-arp route-lookup
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 92.51.193.156 255.255.255.252 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec security-association pmtu-aging infinite
    crypto map outside_map 1 match address outside_cryptomap
    crypto map outside_map 1 set pfs
    crypto map outside_map 1 set peer 92.51.193.158
    crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
    crypto map outside_map interface outside
    crypto ca trustpool policy
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication crack
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 77.75.100.208 255.255.255.240 outside
    ssh 92.51.193.156 255.255.255.252 outside
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    group-policy GroupPolicy_92.51.193.158 internal
    group-policy GroupPolicy_92.51.193.158 attributes
    vpn-tunnel-protocol ikev1 ikev2
    username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
    tunnel-group 92.51.193.158 type ipsec-l2l
    tunnel-group 92.51.193.158 general-attributes
    default-group-policy GroupPolicy_92.51.193.158
    tunnel-group 92.51.193.158 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 local-authentication pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
    : end

    Hi,
    Thanks for the help to date
    I now have the Site to Site working but there is one little issue I have. If I try to RD to a server through the tunnel it will not allow connection on the first attempt however if I ping that host and then attempt to RD it will allow the connection. It looks like the host is asleep until it receives traffic through the tunnel. Is this thje correct behaviour.
    See below the details:
    ASA1:
    hostname PAYBACK
    enable password HSMurh79NVmatjY0 encrypted
    xlate per-session deny tcp any4 any4
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    ip local pool VPN1 192.168.50.1-192.168.50.254 mask 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    speed 100
    duplex full
    interface Ethernet0/1
    description Trunk link to SW1
    switchport trunk allowed vlan 1,10,20,30,40
    switchport trunk native vlan 1
    switchport mode trunk
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    no nameif
    no security-level
    no ip address
    interface Vlan2
    nameif outside
    security-level 0
    ip address XX.XX.XX.XX 255.255.255.252
    interface Vlan10
    nameif inside
    security-level 100
    ip address 192.168.10.1 255.255.255.0
    interface Vlan20
    nameif servers
    security-level 100
    ip address 192.168.20.1 255.255.255.0
    interface Vlan30
    nameif printers
    security-level 100
    ip address 192.168.30.1 255.255.255.0
    interface Vlan40
    nameif wireless
    security-level 100
    ip address 192.168.40.1 255.255.255.0
    banner login line Welcome to Payback Loyalty Systems
    boot system disk0:/asa901-k8.bin
    ftp mode passive
    clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup outside
    dns domain-lookup inside
    dns domain-lookup servers
    dns domain-lookup printers
    dns domain-lookup wireless
    dns server-group DefaultDNS
    name-server 83.147.160.2
    name-server 83.147.160.130
    same-security-traffic permit inter-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network ftp_server
    object network Internal_Report_Server
    host 192.168.20.21
    description Automated Report Server Internal Address
    object network Report_Server
    host 89.234.126.9
    description Automated Report Server
    object service RDP
    service tcp destination eq 3389
    description RDP to Server
    object network Host_QA_Server
    host 89.234.126.10
    description QA Host External Address
    object network Internal_Host_QA
    host 192.168.20.22
    description Host of VM machine for QA
    object network Internal_QA_Web_Server
    host 192.168.20.23
    description Web Server in QA environment
    object network Web_Server_QA_VM
    host 89.234.126.11
    description Web server in QA environment
    object service SQL_Server
    service tcp destination eq 1433
    object network Demo_Server
    host 89.234.126.12
    description Server set up to Demo Product
    object network Internal_Demo_Server
    host 192.168.20.24
    description Internal IP Address of Demo Server
    object network NETWORK_OBJ_192.168.20.0_24
    subnet 192.168.20.0 255.255.255.0
    object network NETWORK_OBJ_192.168.50.0_26
    subnet 192.168.50.0 255.255.255.192
    object network NETWORK_OBJ_192.168.0.0_16
    subnet 192.168.0.0 255.255.0.0
    object service MSSQL
    service tcp destination eq 1434
    description MSSQL port
    object network VPN-network
    subnet 192.168.50.0 255.255.255.0
    object network NETWORK_OBJ_192.168.50.0_24
    subnet 192.168.50.0 255.255.255.0
    object service TS
    service tcp destination eq 4400
    object service TS_Return
    service tcp source eq 4400
    object network External_QA_3
    host 89.234.126.13
    object network Internal_QA_3
    host 192.168.20.25
    object network Dev_WebServer
    host 192.168.20.27
    object network External_Dev_Web
    host 89.234.126.14
    object network NETWORK_OBJ_192.168.100.0_24
    subnet 192.168.100.0 255.255.255.0
    object network Wireless
    subnet 192.168.40.0 255.255.255.0
    description Wireless network
    object network Servers
    subnet 192.168.20.0 255.255.255.0
    object-group service DM_INLINE_SERVICE_1
    service-object tcp destination eq ftp
    service-object tcp destination eq netbios-ssn
    service-object tcp destination eq smtp
    service-object object TS
    service-object object SQL_Server
    object-group service DM_INLINE_SERVICE_3
    service-object tcp destination eq www
    service-object tcp destination eq https
    service-object object TS
    service-object object TS_Return
    object-group service DM_INLINE_SERVICE_4
    service-object object RDP
    service-object tcp destination eq www
    service-object tcp destination eq https
    object-group service DM_INLINE_SERVICE_5
    service-object object MSSQL
    service-object object RDP
    service-object object TS
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group service DM_INLINE_SERVICE_6
    service-object object TS
    service-object object TS_Return
    service-object tcp destination eq www
    service-object tcp destination eq https
    object-group network DM_INLINE_NETWORK_1
    network-object 192.168.10.0 255.255.255.0
    network-object 192.168.20.0 255.255.255.0
    network-object 192.168.40.0 255.255.255.0
    object-group network Payback_Internal
    network-object 192.168.10.0 255.255.255.0
    network-object 192.168.20.0 255.255.255.0
    network-object 192.168.40.0 255.255.255.0
    access-list outside_access_in remark This rule is allowing from internet to interal server.
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark FTP
    access-list outside_access_in remark RDP
    access-list outside_access_in remark SMTP
    access-list outside_access_in remark Net Bios
    access-list outside_access_in remark SQL
    access-list outside_access_in remark TS - 4400
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any4 object Internal_Report_Server
    access-list outside_access_in remark Access rule to internal host QA
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark HTTP
    access-list outside_access_in remark RDP
    access-list outside_access_in extended permit tcp any4 object Internal_Host_QA eq www
    access-list outside_access_in remark Access to INternal Web Server:
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark HTTP
    access-list outside_access_in remark RDP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_3 any4 object Internal_QA_Web_Server
    access-list outside_access_in remark Rule for allowing access to Demo server
    access-list outside_access_in remark Allowed:
    access-list outside_access_in remark RDP
    access-list outside_access_in remark MSSQL
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any4 object Internal_Demo_Server
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
    access-list outside_access_in remark Access for Development WebServer
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
    access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
    access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
    access-list AnyConnect_Client_Local_Print remark Windows' printing port
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
    access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
    access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
    access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
    access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
    access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
    access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
    access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
    access-list Payback_VPN_splitTunnelAcl standard permit 192.168.20.0 255.255.255.0
    access-list outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 192.168.100.0 255.255.255.0
    pager lines 24
    logging enable
    logging console informational
    logging asdm informational
    logging from-address [email protected]
    logging recipient-address [email protected] level alerts
    mtu outside 1500
    mtu inside 1500
    mtu servers 1500
    mtu printers 1500
    mtu wireless 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-711-52.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
    nat (wireless,outside) source static Wireless Wireless destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
    nat (servers,outside) source static Servers Servers destination static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 no-proxy-arp route-lookup
    nat (inside,outside) source dynamic any interface
    nat (wireless,outside) source dynamic any interface
    nat (servers,outside) source dynamic any interface
    nat (servers,outside) source static Internal_Report_Server Report_Server
    nat (servers,outside) source static Internal_Host_QA Host_QA_Server
    nat (servers,outside) source static Internal_QA_Web_Server Web_Server_QA_VM
    nat (servers,outside) source static Internal_Demo_Server Demo_Server
    nat (servers,outside) source static NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 destination static NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 no-proxy-arp route-lookup
    nat (servers,outside) source static Internal_QA_3 External_QA_3
    nat (servers,outside) source static Dev_WebServer External_Dev_Web
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.10.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec security-association pmtu-aging infinite
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map outside_map 1 match address outside_cryptomap
    crypto map outside_map 1 set pfs
    crypto map outside_map 1 set peer XX.XX.XX.XX
    crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map inside_map interface inside
    crypto map servers_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map servers_map interface servers
    crypto ca trustpool policy
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside client-services port 443
    crypto ikev2 enable inside client-services port 443
    crypto ikev1 enable outside
    crypto ikev1 enable inside
    crypto ikev1 enable servers
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 192.168.10.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    dhcpd dns 192.168.0.1
    dhcpd auto_config outside
    dhcpd address 192.168.10.21-192.168.10.240 inside
    dhcpd dns 192.168.20.21 83.147.160.2 interface inside
    dhcpd option 15 ascii paybackloyalty.com interface inside
    dhcpd enable inside
    dhcpd address 192.168.40.21-192.168.40.240 wireless
    dhcpd dns 192.168.20.21 83.147.160.2 interface wireless
    dhcpd update dns interface wireless
    dhcpd option 15 ascii paybackloyalty.com interface wireless
    dhcpd enable wireless
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    group-policy Payback_VPN internal
    group-policy Payback_VPN attributes
    vpn-simultaneous-logins 10
    vpn-tunnel-protocol ikev1
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value Payback_VPN_splitTunnelAcl
    group-policy DfltGrpPolicy attributes
    dns-server value 83.147.160.2 83.147.160.130
    vpn-tunnel-protocol ikev1 ikev2 ssl-clientless
    group-policy GroupPolicy_84.39.233.50 internal
    group-policy GroupPolicy_84.39.233.50 attributes
    vpn-tunnel-protocol ikev1 ikev2
    username Noelle password XB/IpvYaATP.2QYm encrypted
    username Noelle attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Eanna password vXILR9ZZQIsd1Naw encrypted privilege 0
    username Eanna attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Michael password qpbleUqUEchRrgQX encrypted
    username Michael attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Danny password .7fEXdzESUk6S/cC encrypted privilege 0
    username Danny attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username niamh password MlFlIlEiy8vismE0 encrypted
    username niamh attributes
    service-type admin
    username Aileen password tytrelqvV5VRX2pz encrypted privilege 0
    username Aileen attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Aidan password aDu6YH0V5XaxpEPg encrypted privilege 0
    username Aidan attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
    username shane.c password iqGMoWOnfO6YKXbw encrypted
    username shane.c attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Shane password yQeVtvLLKqapoUje encrypted privilege 0
    username Shane attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username James password TdYPv1pvld/hPM0d encrypted
    username James attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username mark password yruxpddqfyNb.qFn encrypted
    username mark attributes
    service-type admin
    username Mary password XND5FTEiyu1L1zFD encrypted
    username Mary attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    username Massimo password vs65MMo4rM0l4rVu encrypted privilege 0
    username Massimo attributes
    vpn-group-policy Payback_VPN
    service-type remote-access
    tunnel-group Payback_VPN type remote-access
    tunnel-group Payback_VPN general-attributes
    address-pool VPN1
    default-group-policy Payback_VPN
    tunnel-group Payback_VPN ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group 84.39.233.50 type ipsec-l2l
    tunnel-group 84.39.233.50 general-attributes
    default-group-policy GroupPolicy_84.39.233.50
    tunnel-group 84.39.233.50 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 local-authentication pre-shared-key *****
    class-map global-class
    match default-inspection-traffic
    policy-map global-policy
    class global-class
      inspect dns
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect pptp
      inspect rsh
      inspect rtsp
      inspect sip
      inspect snmp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect xdmcp
      inspect icmp error
      inspect icmp
    service-policy global-policy global
    smtp-server 192.168.20.21
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:83fa7ce1d93375645205f6e79b526381
    ASA2:
    ASA Version 9.0(1)
    hostname Payback-CIX
    enable password HSMurh79NVmatjY0 encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    speed 100
    duplex full
    interface Ethernet0/1
    description This port connects to VLAN 100
    switchport access vlan 100
    interface Ethernet0/2
    interface Ethernet0/3
    switchport access vlan 100
    interface Ethernet0/4
    switchport access vlan 100
    interface Ethernet0/5
    switchport access vlan 100
    interface Ethernet0/6
    switchport access vlan 100
    interface Ethernet0/7
    switchport access vlan 100
    interface Vlan2
    nameif outside
    security-level 0
    ip address X.X.X.X 255.255.255.240
    interface Vlan100
    nameif inside
    security-level 100
    ip address 192.168.100.1 255.255.255.0
    banner login line Welcome to Payback Loyalty - CIX
    ftp mode passive
    clock timezone GMT 0
    clock summer-time gmt/idt recurring last Sun Mar 1:00 last Sun Oct 2:00
    dns domain-lookup outside
    dns domain-lookup inside
    dns server-group defaultDNS
    name-server 8.8.8.8
    name-server 8.8.4.4
    same-security-traffic permit inter-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network CIX-Host-1
    host 192.168.100.2
    description This is the host machine of the VM servers
    object network External_CIX-Host-1
    host 84.39.233.51
    description This is the external IP address of the host server for the VM server
    object service RDP
    service tcp source range 1 65535 destination eq 3389
    object network Payback_Office
    host 92.51.193.158
    object service MSQL
    service tcp destination eq 1433
    object network Development_OLTP
    host 192.168.100.10
    description VM for Eiresoft
    object network External_Development_OLTP
    host 84.39.233.52
    description This is the external IP address for the VM for Eiresoft
    object network External_TMC_Web
    host 84.39.233.53
    description Public Address of TMC Webserver
    object network TMC_Webserver
    host 192.168.100.19
    description Internal Address of TMC Webserver
    object network External_TMC_OLTP
    host 84.39.233.54
    description Targets OLTP external IP
    object network TMC_OLTP
    host 192.168.100.18
    description Targets interal IP address
    object network External_OLTP_Failover
    host 84.39.233.55
    description Public IP of OLTP Failover
    object network OLTP_Failover
    host 192.168.100.60
    description Server for OLTP failover
    object network Servers
    subnet 192.168.20.0 255.255.255.0
    object network Wired
    subnet 192.168.10.0 255.255.255.0
    object network Wireless
    subnet 192.168.40.0 255.255.255.0
    object network NETWORK_OBJ_192.168.100.0_24
    subnet 192.168.100.0 255.255.255.0
    object network NETWORK_OBJ_192.168.10.0_24
    subnet 192.168.10.0 255.255.255.0
    object network Eiresoft_2nd
    host 137.117.217.29
    description Eiresoft 2nd IP
    object network Dev_Test_Webserver
    host 192.168.100.12
    description Dev Test Webserver Internal Address
    object network External_Dev_Test_Webserver
    host 84.39.233.56
    description This is the PB Dev Test Webserver
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object network LAN
    subnet 192.168.100.0 255.255.255.0
    object network REMOTE-LAN
    subnet 192.168.10.0 255.255.255.0
    object network TargetMC
    host 83.71.194.145
    description This is Target Location that will be accessing the Webserver
    object network Rackspace_OLTP
    host 162.13.34.56
    description This is the IP address of production OLTP
    object service DB
    service tcp destination eq 5022
    object network Topaz_Target_VM
    host 82.198.151.168
    description This is Topaz IP that will be accessing Targets VM
    object service DB_2
    service tcp destination eq 5023
    object network EireSoft_NEW_IP
    host 146.66.161.3
    description Eiresoft latest IP form ISP DHCP
    object-group service DM_INLINE_SERVICE_1
    service-object object MSQL
    service-object object RDP
    service-object icmp echo
    service-object icmp echo-reply
    object-group service DM_INLINE_SERVICE_2
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_4
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    service-object tcp destination eq www
    object-group service DM_INLINE_SERVICE_5
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    object-group service DM_INLINE_SERVICE_6
    service-object object MSQL
    service-object object RDP
    object-group network Payback_Intrernal
    network-object object Servers
    network-object object Wired
    network-object object Wireless
    object-group service DM_INLINE_SERVICE_8
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_9
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_10
    service-object object MSQL
    service-object object RDP
    service-object tcp destination eq ftp
    service-object icmp echo
    service-object icmp echo-reply
    service-object object DB
    object-group service DM_INLINE_SERVICE_11
    service-object object RDP
    service-object tcp destination eq ftp
    object-group service DM_INLINE_SERVICE_12
    service-object object MSQL
    service-object icmp echo
    service-object icmp echo-reply
    service-object object DB
    service-object object DB_2
    object-group service DM_INLINE_SERVICE_13
    service-object object MSQL
    service-object object RDP
    object-group service DM_INLINE_SERVICE_14
    service-object object MSQL
    service-object object RDP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-Host-1
    access-list outside_access_in remark Development OLTP from Payback Office
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver
    access-list outside_access_in remark Access to OLTP for target from Payback Office
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover
    access-list outside_access_in remark Access for the 2nd IP from Eiresoft
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP
    access-list outside_access_in remark Access from the 2nd Eiresoft IP
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP
    access-list outside_access_in remark Access rules from Traget to CIX for testing
    access-list outside_access_in extended permit tcp object TargetMC object TMC_Webserver eq www
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_12 object Rackspace_OLTP object OLTP_Failover
    access-list outside_access_in remark Topaz access to Target VM
    access-list outside_access_in extended permit tcp object Topaz_Target_VM object TMC_Webserver eq www
    access-list outside_access_in remark Opened up for Target for the weekend. Closing on Monday 20th
    access-list outside_access_in extended permit tcp any object TMC_Webserver eq www
    access-list outside_access_in remark Access for Eiresoft after their ISP changed their IP Address
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_13 object EireSoft_NEW_IP object Development_OLTP
    access-list outside_access_in remark Eiresoft Access after ISP changed their IP Address
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_14 object EireSoft_NEW_IP object OLTP_Failover
    access-list outside_cryptomap extended permit ip 192.168.100.0 255.255.255.0 object-group Payback_Intrernal
    pager lines 24
    logging enable
    logging console debugging
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside) source static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 destination static Payback_Intrernal Payback_Intrernal no-proxy-arp route-lookup
    nat (inside,outside) source static CIX-Host-1 External_CIX-Host-1
    nat (inside,outside) source static Development_OLTP External_Development_OLTP
    nat (inside,outside) source static TMC_Webserver External_TMC_Web
    nat (inside,outside) source static TMC_OLTP External_TMC_OLTP
    nat (inside,outside) source static OLTP_Failover External_OLTP_Failover
    nat (inside,outside) source static Dev_Test_Webserver External_Dev_Test_Webserver
    nat (inside,outside) source dynamic LAN interface
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http X.X.X.X 255.255.255.252 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec security-association pmtu-aging infinite
    crypto map outside_map 1 match address outside_cryptomap
    crypto map outside_map 1 set pfs
    crypto map outside_map 1 set peer X.X.X.X
    crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256
    crypto map outside_map interface outside
    crypto ca trustpool policy
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable outside
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication crack
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh X.X.X.X  255.255.255.240 outside
    ssh X.X.X.X 255.255.255.252 outside
    ssh 192.168.40.0 255.255.255.0 outside
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    group-policy GroupPolicy_92.51.193.158 internal
    group-policy GroupPolicy_92.51.193.158 attributes
    vpn-tunnel-protocol ikev1 ikev2
    username gordon password 6e6Djaz3W/XH59zX encrypted privilege 15
    tunnel-group 92.51.193.158 type ipsec-l2l
    tunnel-group 92.51.193.158 general-attributes
    default-group-policy GroupPolicy_92.51.193.158
    tunnel-group 92.51.193.158 ipsec-attributes
    ikev1 pre-shared-key *****
    ikev2 remote-authentication pre-shared-key *****
    ikev2 local-authentication pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:78a7b9ccec2fa048306092eb29a2b769

  • Cisco ASA 5505 not able to access flash

    Hi All:
    I have searched and searched all over the net for an answer to this question and have decided to just post it. I have a 5505 that was given to me by my job to use for working on my CCNA Sec. cert and did the following:
    I plugged it in and booted it up just fine. Made config changes as I followed along with the examples in my CCNA Security book. Got to the point in chapter 14 where the initial setup happens to configure it for working with ASDM. I never did a write mem on it and decided to take it back to square one by unplugging it to allow it to lose the changes that I made. This is where things got ugly.
    When it booted back up it got stuck in a bootup loop and couldn't find an IOS. After following all kinds of steps to boot to rommon and tftp another IOS and such (several times) I decided to follow another posting that said that the flash could be corrupted and to just delete it and start anew. Did that and through rommon as it would not boot up normally any more. After trying this over and over for the last couple hours I realized that it would boot from tftp so I did that in hopes of fixing the flash issue.
    I've tried deleting it, and re-initializing it and formating it. But the thing is that it no longer SEES the disk0: mount point. I've used two different flash cards...the one that came with it and the one that I already had. With the cover off I can see that there is no activity light next to the flash drive when I issue a delete or initialize or format command.
    Here is a copy of some of the output file. Any help or suggestions are greatly appreciated.
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Please set ADDRESS Variable.
    Please set SERVER Variable.
    Please set IMAGE Variable.
    Launching BootLoader...
    Default configuration file contains 1 entry.
    Boot mode is 1. Default entry is 1.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    Failsafe booting engaged.
    Default configuration file contains 1 entry.
    Searching / for images to boot.
    No images in /
    Error 15: File not found
    unable to boot an image
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
    Low Memory: 632 KB
    High Memory: 507 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  01  00   1022   2080  Host Bridge       
    00  01  02   1022   2082  Chipset En/Decrypt 11
    00  0C  00   1148   4320  Ethernet           11
    00  0D  00   177D   0003  Network En/Decrypt 10
    00  0F  00   1022   2090  ISA Bridge        
    00  0F  02   1022   2092  IDE Controller    
    00  0F  03   1022   2093  Audio              10
    00  0F  04   1022   2094  Serial Bus         9
    00  0F  05   1022   2095  Serial Bus         9
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May  1 14:50:05 PDT 2008
    Platform ASA5505
    Use BREAK or ESC to interrupt boot.
    Use SPACE to begin boot immediately.
    Boot interrupted.                              
    Ethernet0/0
    MAC Address: 0023.339e.2a91
    Link is UP
    Use ? for help.
    rommon #0> format disk0:
    Invalid or incorrect command.  Use 'help' for help.
    rommon #0> ADDRESS=10.10.10.110
    rommon #1> GATEWAY=10.10.10.1
    rommon #2> SERVER=10.10.10.98
    rommon #3> IMAGE=asa914-k8.bin
    rommon #4> tftp
    ROMMON Variable Settings:
      ADDRESS=10.10.10.110
      SERVER=10.10.10.98
      GATEWAY=10.10.10.1
      PORT=Ethernet0/0
      VLAN=untagged
      IMAGE=asa914-k8.bin
      CONFIG=
      LINKTIMEOUT=20
      PKTTIMEOUT=4
      RETRY=20
    tftp [email protected] via 10.10.10.1
    Received 27076608 bytes
    Launching TFTP Image...
    Cisco Security Appliance admin loader (3.0) #0: Thu Dec  5 19:38:43 PST 2013
    Platform ASA5505
    Loading...
    IO memory blocks requested from bigphys 32bit: 9956
    Àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
    Currently, only 1 or 2 FATs are supported, not 42.
    dosfsck(/dev/hda1) returned 1
    mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
    mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
    Processor memory 343932928, Reserved memory: 62914560
    Total SSMs found: 0
    Total NICs found: 10
    88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
    88E6095 rev 2 Ethernet @ index 08 MAC: 0023.339e.2a90
    88E6095 rev 2 Ethernet @ index 07 MAC: 0023.339e.2a8f
    88E6095 rev 2 Ethernet @ index 06 MAC: 0023.339e.2a8e
    88E6095 rev 2 Ethernet @ index 05 MAC: 0023.339e.2a8d
    88E6095 rev 2 Ethernet @ index 04 MAC: 0023.339e.2a8c
    88E6095 rev 2 Ethernet @ index 03 MAC: 0023.339e.2a8b
    88E6095 rev 2 Ethernet @ index 02 MAC: 0023.339e.2a8a
    88E6095 rev 2 Ethernet @ index 01 MAC: 0023.339e.2a89
    y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 0023.339e.2a91
    INFO: Unable to read firewall mode from flash
           Writing default firewall mode (single) to flash
    INFO: Unable to read cluster interface-mode from flash
           Writing default mode "None" to flash
    Verify the activation-key, it might take a while...
    Failed to retrieve permanent activation key.
    Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
    The Running Activation Key is not valid, using default settings:
    Licensed features for this platform:
    Maximum Physical Interfaces       : 8              perpetual
    VLANs                             : 3              DMZ Restricted
    Dual ISPs                         : Disabled       perpetual
    VLAN Trunk Ports                  : 0              perpetual
    Inside Hosts                      : 10             perpetual
    Failover                          : Disabled       perpetual
    Encryption-DES                    : Enabled        perpetual
    Encryption-3DES-AES               : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 10             perpetual
    Total VPN Peers                   : 12             perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    Cluster                           : Disabled       perpetual
    This platform has a Base license.
    Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                                 Boot microcode        : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2_05
                                 IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.09
    Cisco Adaptive Security Appliance Software Version 9.1(4)
      ****************************** Warning *******************************
      This product contains cryptographic features and is
      subject to United States and local country laws
      governing, import, export, transfer, and use.
      Delivery of Cisco cryptographic products does not
      imply third-party authority to import, export,
      distribute, or use encryption. Importers, exporters,
      distributors and users are responsible for compliance
      with U.S. and local country laws. By using this
      product you agree to comply with applicable laws and
      regulations. If you are unable to comply with U.S.
      and local laws, return the enclosed items immediately.
      A summary of U.S. laws governing Cisco cryptographic
      products may be found at:
      http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
      If you require further assistance please contact us by
      sending email to [email protected].
      ******************************* Warning *******************************
    This product includes software developed by the OpenSSL Project
    for use in the OpenSSL Toolkit (http://www.openssl.org/)
    Copyright (C) 1995-1998 Eric Young ([email protected])
    All rights reserved.
    Copyright (c) 1998-2011 The OpenSSL Project.
    All rights reserved.
    This product includes software developed at the University of
    California, Irvine for use in the DAV Explorer project
    (http://www.ics.uci.edu/~webdav/)
    Copyright (c) 1999-2005 Regents of the University of California.
    All rights reserved.
    Busybox, version 1.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA
    Busybox comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    DOSFSTOOLS, version 2.11, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    59 Temple Place, Suite 330, Boston, MA 02111-1307
    675 Mass Ave, Cambridge, MA 02139
    DOSFSTOOLS comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    grub, version 0.94, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    59 Temple Place, Suite 330, Boston, MA 02111-1307
    grub comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    libgcc, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
    libgcc comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenseSee User Manual (''Licensing'') for details.
    libstdc++, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
    libstdc++ comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    Linux kernel, version 2.6.29.6, Copyright (C) 1989, 1991 Free Software
    Foundation, Inc.
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA
    Linux kernel comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    module-init-tools, version 3.10, Copyright (C) 1989, 1991 Free Software
    Foundation, Inc.
    59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    module-init-tools comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    numactl, version 2.0.3, Copyright (C) 2008 SGI.
    Author: Andi Kleen, SUSE Labs
    Version 2.0.0 by Cliff Wickman, Chritopher Lameter and Lee Schermerhorn
    numactl comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    pciutils, version 3.1.4, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA
    pciutils comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    readline, version 5.2, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    59 Temple Place, Suite 330, Boston, MA 02111 USA
    readline comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    udev, version 146, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA
    udev comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to redistribute it under the General
    Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
    See User Manual (''Licensing'') for details.
    Cisco Adapative Security Appliance Software, version 9.1,
    Copyright (c) 1996-2013 by Cisco Systems, Inc.
    Certain components of Cisco ASA Software, Version 9.1 are licensed under the GNU
    Lesser Public License (LGPL) Version 2.1.  The software code licensed under LGPL
    Version 2.1 is free software that comes with ABSOLUTELY NO WARRANTY.  You can
    redistribute and/or modify such LGPL code under the terms of LGPL Version 2.1
    (http://www.gnu.org/licenses/lgpl-2.1.html).  See User Manual for licensing
    details.
                    Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
                    Cisco Systems, Inc.
                    170 West Tasman Drive
                    San Jose, California 95134-1706
    Insufficient flash space available for this request:
      Size info: request:32 free:0  delta:32
    Could not initialize system files in flash.
    config_fetcher: channel open failed
    ERROR: MIGRATION - Could not get the startup configuration.
    INFO: Power-On Self-Test in process.
    INFO: Power-On Self-Test complete.
    INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_200804300128.log'
    Pre-configure Firewall now through interactive prompts [yes]? n
    Type help or '?' for a list of available commands.
    ciscoasa> en
    Password:
    ciscoasa# format disk0:
    Format operation may take a while. Continue? [confirm]
    Format operation will destroy all data in "disk0:".  Continue? [confirm]
    Initializing partition - done!
    Creating FAT16 filesystem
    mkdosfs 2.11 (12 Mar 2005)
    System tables written to disk
    Format of disk0 complete
    ciscoasa# format disk:
                     ^
    ERROR: % Invalid input detected at '^' marker.
    ciscoasa# format flash:
    Format operation may take a while. Continue? [confirm]
    Format operation will destroy all data in "flash:".  Continue? [confirm]
    Initializing partition - done!

    Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh flash
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh disk0
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#

  • Cisco ASA 5505 VPN Routing/Networking Question

    I have a very basic question about Cisco ASA 5505 IPsec Site to Site VPNs.  I want to install a Cisco ASA 5505 at a Data Center, in a LAN subnet that utilizes publicly routable IP addresses.  I would like to install a second Cisco ASA 5505 in a remote branch office as its peer. 
    Regardless of whether I use publicly routable IPs at the branch office in the "inside" network or non-routable IPs, how would the devices and servers at the Data Center know to route IP packets destined for the branch office back through the Cisco ASA instead of through the default gateway at the Data Center?  I can see accomplishing this if every single device at the Data Center is configured with routing table entries, but that isn't feasible.  It also isn't feasible to use the Cisco ASA 5505 as the default gateway for all of the devices as the Data Center, allowing it to decide where the traffic should go.
    What am I missing?  Is the solution to try to map branch office IPs to IP addresses within the Data Center's LAN subnet so that all of the traffic is on the same subnet?

    You can do it in several different ways.
    One way is to tell the server that if it has traffic to network x then it needs to go to the ASA all other traffic is to head for the default gateway.
    In windows this is done via the route command
    do not forget to make it "persistent" otherwise the route will disapear when your reboot the server.
    in unix/linux
    It is also the route command
    Or you can tell your "default gateway" to route that network to the ASA
    Good luck
    HTH

  • Cisco ASA 5505 - Base License

    Hello to everyone
    I having this kind of config and in my network were workig flawless but in the site installed is giving me trouble.
    First my conection to the site is working so i can access from the internet to the ASA, but I cant do inter-vlan routing in the ASA.
    I have activated those commands and nothing i cant not ping to my vlan2 interface from my inside: I do not have a router making the L3 routing only the ASA but it could let me pass traffic because the ASA is a L3 device. alsa this licence has no trunk.
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    Well I have do many things and nothing,
    policy-map global_policy
    class inspection_default
    inspect icmp
    not results, waiting for your comments.
    Licensed features for this platform:
    Maximum Physical Interfaces    : 8
    VLANs                          : 3, DMZ Restricted
    Inside Hosts                   : 10
    Failover                       : Disabled
    VPN-DES                        : Enabled
    VPN-3DES-AES                   : Enabled
    SSL VPN Peers                  : 2
    Total VPN Peers                : 10
    Dual ISPs                      : Disabled
    VLAN Trunk Ports               : 0
    Botnet Traffic Filter          : Disabled
    ASA Version 8.2(5)
    hostname ASA5505
    enable password XXXXXXXXXXXXXX encrypted
    passwd XXXX.XXXXXXXX encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.0.0.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address XX.XX.XX.174 255.255.255.248
    ftp mode passive
    pager lines 24
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 10 interface
    nat (inside) 10 10.0.0.0 255.255.255.0
    route outside 0.0.0.0 0.0.0.0 XX.XX.XX.169 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication ssh console LOCAL
    aaa authentication http console LOCAL
    http server enable
    http 0.0.0.0 0.0.0.0 outside
    http 10.0.0.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet timeout 5
    ssh 10.0.0.0 255.255.255.0 inside
    ssh 0.0.0.0 0.0.0.0 outside
    ssh timeout 5
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    username root password XXXXXXXXX encrypted privilege 15
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip
      inspect xdmcp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:0c8a226f7c4a8d5a03e6fcd821893898
    : end

    Cisco ASA 5505 Base License - not inter-vlan-routing no internet access from inside interface
    here the output from my pings
    ping
    Interface: inside
    Target IP address: 10.0.0.1
    Sending 5, 100-byte ICMP Echos to 10.0.0.1, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    ASA5505# ping
    Interface: outside
    Target IP address: 66.XX.XX.174
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 66.XX.XX.174, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    ASA5505# ping
    Interface: inside
    Target IP address: 66.XX.XX.174
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 66.XX.XX.174, timeout is 2 seconds:
    Success rate is 0 percent (0/5)
    ASA5505# ping
    Interface: outside
    Target IP address: 10.0.0.1
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 10.0.0.1, timeout is 2 seconds:
    Success rate is 0 percent (0/5)
    So inter-vlan routing is not wowrking after I have to use the followings commands to see if there any change but not results
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    policy-map global_policy
    class inspection_default
    inspect icmp
    exit
    exit
    service-policy global_policy global
    After all the thing i've done in CLI I logged into the ASDM and in the nat section i look that nat was not having destination.
    global (outside) 10 interface
    nat (inside) 10 10.0.0.0 255.255.255.0
    so I decide to apply in this way
    global (outside) 1 interface
    nat (inside) 1 access-list inside_nat_outbound
    and voila everything is working i was able to ping 4.2.2.2 to the outside, I think that the problem is with the public ip directly assigned to  the ASA by iSP and not the private ip, because in my test enviorement was working perfectly and i was using 192.168.0.0 and 172.18.0.0 networks as the outside interface ip and everything was fine.
    But thanks to all that help now have to start to apply security and acls configs.

  • Cisco ASA 5505 - 2 internal Networks

    Hi new to ASA's,
    Been trying to get the following setup working for ages but can't see what I am missing:
    (Got image from another post but exactly what I want but cannot get working)
    I can get ping between subnets but nothing else and Lan 2 cannot get to internet.
    The reolution for this guy was the following I believe; (from his config he has ASA v8.2)
    same-security-traffic permit intra-interface
    access-list NONAT permit ip 192.168.50.0 255.255.255.0 10.0.50.0255.255.255.0
    access-list NONAT permit ip 10.0.50.0 255.255.255.0 192.168.50.0 255.255.255.0
    nat (inside) 0 access-list NONAT
    I have tried this but I have ASA v8.4 and whilst commands 1 - 3 work command 4 doesn't.
    I get a message about the command being deprecated. I couldn't find a new version I could understand.
    Hope nothing stupid and simple but any help greatly appreciated.
    BTW, I have reset my ASA back to defaults except internet access is working and internet LAN as I made some many changes I feared one my conflict with the other.
    Many thanks for any views or help.

    Hi Jumora,
    Thanks for the reply.
    The 192 network behind the ASA can access the internet but the 10 network past the 1841 router can't.
    I have setup tcp bypass already as that got me at least remote access to the PC's on the 10 network from the 192 network.
    I had the 1841 router set to use the interface on the 192 subnet as the route to the 0.0.0.0 0.0.0.0 network but I couldn't get out but have just changed this to go to the inside interface of the ASA and can now ping 8.8.8.8 for example but still not internet access.
    Also I have found that the ASA seems to occasionally when it feels like it block pings from the 10 subnet to devices in the 192 subnet...... annoying for testing! but I can still access shares even though the ping fails.
    e.g. as per above yesterday it stopped when I enabled icmp error inspection but when I switched that off it worked again. Then suddenly again today with no changes it has stopped working again, drives me nuts the inconsistency!
    I couldn't find an attach option for the show tech so it has made this post massive.... apologies for that....
    ASA5505# show tech
    Cisco Adaptive Security Appliance Software Version 8.4(4)1
    Device Manager Version 6.4(9)
    Compiled on Thu 14-Jun-12 11:20 by builders
    System image file is "disk0:/asa844-1-k8.bin"
    Config file at boot was "startup-config"
    ASA5505 up 8 days 23 hours
    Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz
    Internal ATA Compact Flash, 128MB
    BIOS Flash M50FW016 @ 0xfff00000, 2048KB
    Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                                 Boot microcode   : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.06
                                 Number of accelerators: 1
    0: Int: Internal-Data0/0    : address is 4403.a7a2.e7c7, irq 11
    1: Ext: Ethernet0/0         : address is 4403.a7a2.e7bf, irq 255
    2: Ext: Ethernet0/1         : address is 4403.a7a2.e7c0, irq 255
    3: Ext: Ethernet0/2         : address is 4403.a7a2.e7c1, irq 255
    4: Ext: Ethernet0/3         : address is 4403.a7a2.e7c2, irq 255
    5: Ext: Ethernet0/4         : address is 4403.a7a2.e7c3, irq 255
    6: Ext: Ethernet0/5         : address is 4403.a7a2.e7c4, irq 255
    7: Ext: Ethernet0/6         : address is 4403.a7a2.e7c5, irq 255
    8: Ext: Ethernet0/7         : address is 4403.a7a2.e7c6, irq 255
    9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
    10: Int: Not used            : irq 255
    11: Int: Not used            : irq 255
    Licensed features for this platform:
    Maximum Physical Interfaces       : 8              perpetual
    VLANs                             : 3              DMZ Restricted
    Dual ISPs                         : Disabled       perpetual
    VLAN Trunk Ports                  : 0              perpetual
    Inside Hosts                      : 50             perpetual
    Failover                          : Disabled       perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 10             perpetual
    Total VPN Peers                   : 12             perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has a Base license.
    Serial Number: JMX3434343T
    Running Permanent Activation Key: 0x8509ef7f 0x2cff5895 0xa4675895 0x7989798 0xc1323132
    Configuration register is 0x1
    Configuration last modified by enable_15 at 16:21:28.863 UTC Wed Oct 23 2013
    ------------------ show disk0: controller ------------------
    Flash Model: SMART CF
    ------------------ show clock ------------------
    04:43:59.822 UTC Thu Oct 24 2013
    ------------------ show crashinfo ------------------
    No crash file found.
    ------------------ show module ------------------
    Mod Card Type                                    Model              Serial No.
      0 ASA 5505 Adaptive Security Appliance         ASA5505            JMX3434343T
    Mod MAC Address Range                 Hw Version   Fw Version   Sw Version    
      0 1255.a3a4.e3bf to 1233.a4a4.e4c4  0.1          1.0(12)13    8.4(4)1
    Mod SSC Application Name           Status           SSC Application Version
    Mod Status             Data Plane Status     Compatibility
      0 Up Sys             Not Applicable        
    ------------------ show memory ------------------
    Free memory:         283382600 bytes (53%)
    Used memory:         253488312 bytes (47%)
    Total memory:        536870912 bytes (100%)
    ------------------ show conn count ------------------
    76 in use, 704 most used
    ------------------ show xlate count ------------------
    80 in use, 814 most used
    ------------------ show vpn-sessiondb summary ------------------
    No sessions to display.
    ------------------ show blocks ------------------
      SIZE    MAX    LOW    CNT
         0    400    399    400
    4    100     99     99
        80    347    332    347
       256    200    192    195
      1550   6374   6306   6371
      2048   1200   1199   1200
      2560    264    264    264
      4096    100     99    100
      8192    100     99    100
    16384    100     99    100
    65536     16     15     16
    CORE  LIMIT  ALLOC   HIGH    CNT       FAILED
       0  24576     26     26     25            0
    ------------------ show blocks queue history detail ------------------
    History buffer memory usage: 2832 bytes (default)
    History analysis time limit: 100 msec
    Please see 'show blocks exhaustion snapshot' for more information
    ------------------ show interface ------------------
    Interface Ethernet0/0 "", is up, line protocol is up
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7bf, MTU not set
    IP address unassigned
    8257648 packets input, 9051289473 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    6222 switch ingress policy drops
    6399241 packets output, 1011134108 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 3
    Interface config status is active
    Interface state is active
    Interface Ethernet0/1 "", is up, line protocol is up
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c0, MTU not set
    IP address unassigned
    1330699 packets input, 312264395 bytes, 0 no buffer
    Received 63097 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    0 switch ingress policy drops
    1738131 packets output, 637935280 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 4
    Interface config status is active
    Interface state is active
    Interface Ethernet0/2 "", is up, line protocol is up
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c1, MTU not set
    IP address unassigned
    5028958 packets input, 693527818 bytes, 0 no buffer
    Received 28835 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    1 switch ingress policy drops
    7782140 packets output, 8316018900 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 5
    Interface config status is active
    Interface state is active
    Interface Ethernet0/3 "", is up, line protocol is up
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c2, MTU not set
    IP address unassigned
    17048409 packets input, 21350059442 bytes, 0 no buffer
    Received 75081 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    18 switch ingress policy drops
    8319277 packets output, 5138543287 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 6
    Interface config status is active
    Interface state is active
    Interface Ethernet0/4 "", is down, line protocol is down
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex, Auto-Speed
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c3, MTU not set
    IP address unassigned
    0 packets input, 0 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    0 switch ingress policy drops
    0 packets output, 0 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 7
    Interface config status is not active
    Interface state is active
    Interface Ethernet0/5 "", is down, line protocol is down
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex, Auto-Speed
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c4, MTU not set
    IP address unassigned
    0 packets input, 0 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    0 switch ingress policy drops
    0 packets output, 0 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 8
    Interface config status is not active
    Interface state is active
    Interface Ethernet0/6 "", is down, line protocol is down
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex, Auto-Speed
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c5, MTU not set
    IP address unassigned
    0 packets input, 0 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    0 switch ingress policy drops
    0 packets output, 0 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 9
    Interface config status is not active
    Interface state is active
    Interface Ethernet0/7 "", is up, line protocol is up
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
    Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    Available but not configured via nameif
    MAC address 4403.a7a2.e7c6, MTU not set
    IP address unassigned
    7293552 packets input, 4521902362 bytes, 0 no buffer
    Received 6520 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops
    0 switch ingress policy drops
    16232858 packets output, 21234947011 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 rate limit drops
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 10
    Interface config status is active
    Interface state is active
    Interface Internal-Data0/0 "", is up, line protocol is up
      Hardware is y88acs06, BW 1000 Mbps, DLY 10 usec
    (Full-duplex), (1000 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    MAC address 4403.a2a2.e2c2, MTU not set
    IP address unassigned
    15222257 packets input, 10134321711 bytes, 0 no buffer
    Received 173531 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 L2 decode drops, 0 demux drops
    15128507 packets output, 10256870512 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 input reset drops, 0 output reset drops, 0 tx hangs
    input queue (blocks free curr/low): hardware (512/487)
    output queue (blocks free curr/low): hardware (512/450)
      Control Point Interface States:
    Interface number is 2
    Interface config status is active
    Interface state is active
    Interface Internal-Data0/1 "", is up, line protocol is up
      Hardware is 88E6095, BW 1000 Mbps, DLY 10 usec
    (Full-duplex), (1000 Mbps)
    Input flow control is unsupported, output flow control is unsupported
    MAC address 0000.0003.0002, MTU not set
    IP address unassigned
    15128465 packets input, 10256855882 bytes, 0 no buffer
    Received 1967 broadcasts, 0 runts, 0 giants
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 pause input, 0 resume input
    0 switch ingress policy drops
    15222217 packets output, 10134318430 bytes, 0 underruns
    0 pause output, 0 resume output
    0 output errors, 0 collisions, 0 interface resets
    0 late collisions, 0 deferred
    0 switch egress policy drops
    0 input reset drops, 0 output reset drops
      Control Point Interface States:
    Interface number is 11
    Interface config status is active
    Interface state is active
    Interface Vlan1 "inside", is up, line protocol is up
      Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
    MAC address 4403.a7a2.e7c7, MTU 1500
    IP address 192.168.1.1, subnet mask 255.255.255.0
      Traffic Statistics for "inside":
    4183727 packets input, 523675346 bytes
    5702790 packets output, 5851485425 bytes
    142576 packets dropped
          1 minute input rate 22 pkts/sec,  2839 bytes/sec
          1 minute output rate 30 pkts/sec,  22751 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 33 pkts/sec,  3746 bytes/sec
          5 minute output rate 46 pkts/sec,  20906 bytes/sec
          5 minute drop rate, 1 pkts/sec
      Control Point Interface States:
    Interface number is 14
    Interface config status is active
    Interface state is active
    Interface Vlan2 "outside", is up, line protocol is up
      Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
    MAC address 4403.a7a2.e7c7, MTU 1492
    IP address 98.22.77.33, subnet mask 255.255.255.255
      Traffic Statistics for "outside":
    10541983 packets input, 11433817622 bytes
    3793777 packets output, 526586888 bytes
    13654 packets dropped
          1 minute input rate 47 pkts/sec,  41657 bytes/sec
          1 minute output rate 18 pkts/sec,  2802 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 80 pkts/sec,  38519 bytes/sec
          5 minute output rate 29 pkts/sec,  3749 bytes/sec
          5 minute drop rate, 0 pkts/sec
      Control Point Interface States:
    Interface number is 15
    Interface config status is active
    Interface state is active
    Interface Virtual0 "_internal_loopback", is up, line protocol is up
      Hardware is Virtual          MAC address 0000.0000.0000, MTU 1500
    IP address 127.0.0.1, subnet mask 255.255.255.0
      Traffic Statistics for "_internal_loopback":
    1 packets input, 28 bytes
    1 packets output, 28 bytes
    1 packets dropped
          1 minute input rate 0 pkts/sec,  0 bytes/sec
          1 minute output rate 0 pkts/sec,  0 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
      Control Point Interface States:
    Interface number is 12
    Interface config status is active
    Interface state is active
    ------------------ show cpu usage ------------------
    CPU utilization for 5 seconds = 12%; 1 minute: 8%; 5 minutes: 8%
    ------------------ show cpu hogging process ------------------
    Process:      Unicorn Admin Handler, PROC_PC_TOTAL: 1, MAXHOG: 23, LASTHOG: 23
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x0853e1f4 (suspend)
    Process:      Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 23, LASTHOG: 23
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x0853e1f4 (suspend)
    Call stack:   0x0853e1f4  0x0853ec36  0x0854182c  0x0869cc4b  0x08415ae7  0x0840ae40  0x0806e6cf
                  0x08aade2b  0x0806e6cf  0x084a0a44  0x0849986d  0x08499aac  0x08499dd6  0x084a0909
    Process:      Unicorn Admin Handler, PROC_PC_TOTAL: 2, MAXHOG: 18, LASTHOG: 18
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x0853fb48 (suspend)
    Process:      Unicorn Admin Handler, NUMHOG: 2, MAXHOG: 18, LASTHOG: 18
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x0853fb48 (suspend)
    Call stack:   0x0853fb48  0x0853fd1d  0x0853e1bc  0x0853ec36  0x0854182c  0x0869cc4b  0x08415ae7
          0x0840ae40  0x0806e6cf  0x08aade2b  0x0806e6cf  0x084a0a44  0x0849986d  0x08499aac
    Process:      Unicorn Admin Handler, PROC_PC_TOTAL: 2, MAXHOG: 24, LASTHOG: 24
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x084167d2 (suspend)
    Process:      Unicorn Admin Handler, NUMHOG: 2, MAXHOG: 24, LASTHOG: 24
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x084167d2 (suspend)
    Call stack:   0x08538afd  0x0853fa3a  0x0853fd1d  0x0853e1bc  0x0853ec36  0x0854182c  0x0869cc4b
                  0x08415ae7  0x0840ae40  0x0806e6cf  0x08aade2b  0x0806e6cf  0x084a0a44  0x0849986d
    Process:      Unicorn Admin Handler, PROC_PC_TOTAL: 1, MAXHOG: 12, LASTHOG: 12
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x08ee9b4e (suspend)
    Process:      Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 12, LASTHOG: 12
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x08ee9b4e (suspend)
    Call stack:   0x08ee9e12  0x084a1032  0x0849986d  0x08499aac  0x08499dd6  0x084a0909  0x080689bc
    Process:      Dispatch Unit, PROC_PC_TOTAL: 2, MAXHOG: 12, LASTHOG: 12
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x081e208a (suspend)
    Process:      Dispatch Unit, NUMHOG: 2, MAXHOG: 12, LASTHOG: 12
    LASTHOG At:   06:01:57 UTC Oct 15 2013
    PC:           0x081e208a (suspend)
    Call stack:   0x081e208a  0x080689bc
    Process:      Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 180, LASTHOG: 180
    LASTHOG At:   07:24:33 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a8c2  0x08a8ebd7  0x08a8f7c8  0x08a914fa  0x080ddd6f  0x080df9db  0x080f4132
                  0x080f5b16  0x080dd956  0x080de0ef  0x080de876  0x080dea37  0xdd6e6c1c  0xdd6e71b5
    Process:      rtcli async executor process, NUMHOG: 14, MAXHOG: 94, LASTHOG: 82
    LASTHOG At:   07:28:06 UTC Oct 19 2013
    PC:           0x08f262e3 (suspend)
    Call stack:   0x0806a881  0x08f262e3  0x08f432a2  0x09064ba8  0x0903dfa9  0x0904f88d  0x0903ed70
                  0x09036221  0x0903d29b  0x0903d49f  0x09035ffa  0x09055321  0x0903dfa9  0x0904f88d
    Process:      rtcli async executor process, PROC_PC_TOTAL: 27, MAXHOG: 319, LASTHOG: 88
    LASTHOG At:   07:28:06 UTC Oct 19 2013
    PC:           0x08f4212d (suspend)
    Process:      rtcli async executor process, NUMHOG: 27, MAXHOG: 319, LASTHOG: 88
    LASTHOG At:   07:28:06 UTC Oct 19 2013
    PC:           0x08f4212d (suspend)
    Call stack:   0x08069faa  0x08f4212d  0x08f260b6  0x08f27b85  0x08f27c35  0xcb147b98
    Process:      rtcli async executor process, PROC_PC_TOTAL: 12, MAXHOG: 45, LASTHOG: 10
    LASTHOG At:   07:28:14 UTC Oct 19 2013
    PC:           0x08f2594b (suspend)
    Process:      rtcli async executor process, NUMHOG: 12, MAXHOG: 45, LASTHOG: 10
    LASTHOG At:   07:28:14 UTC Oct 19 2013
    PC:           0x08f2594b (suspend)
    Call stack:   0x0806a881  0x08f2594b  0x08f27b85  0x08f27c35  0xcb147b98
    Process:      Unicorn Admin Handler, NUMHOG: 4, MAXHOG: 11, LASTHOG: 11
    LASTHOG At:   07:28:14 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a8c2  0x08a8ebd7  0x08b9aa46  0x08b9ad0e  0x080dc76f  0xdd6e6961  0xdd6e71b5
                  0xdd6e7b07  0xdd6e8d5c  0xdd6e138d  0xdd6e247a  0x080dcb22  0x0849f899  0x084981c7
    Process:      rtcli async executor process, PROC_PC_TOTAL: 83, MAXHOG: 298, LASTHOG: 119
    LASTHOG At:   07:28:16 UTC Oct 19 2013
    PC:           0x08f262e3 (suspend)
    Process:      rtcli async executor process, NUMHOG: 47, MAXHOG: 298, LASTHOG: 119
    LASTHOG At:   07:28:16 UTC Oct 19 2013
    PC:           0x08f262e3 (suspend)
    Call stack:   0x0806a881  0x08f262e3  0x08f38fad  0x08f3acc0  0x0905a29e  0x0905b2ba  0x0903dfa9
                  0x0903ecb5  0x0904f6f5  0x0903ed70  0x09036221  0x0903d29b  0x0903d49f  0x09035ffa
    Process:      Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 180, LASTHOG: 180
    LASTHOG At:   07:28:16 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a881  0x0806a8c2  0x0816261b  0x095302a7  0x0954abef  0x0954acc3  0x0815aabe
                  0x08134da6  0x08c64632  0x08ea8079  0x08ea8481  0x08ea85f7  0x08f41adc  0x0806e6cf
    Process:      Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 15, LASTHOG: 15
    LASTHOG At:   07:28:20 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a881  0x0806a8c2  0x0947a399  0x0946d24d  0x0946d364  0x08c2b0e6  0x08c38f65
                  0x08ea810b  0x08ea8481  0x08ea85f7  0x08f41adc  0x0806e6cf  0x08f3cc48  0x092afca6
    Process:      Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 64, LASTHOG: 64
    LASTHOG At:   07:28:20 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a881  0x0806a8c2  0x0947a3e4  0x09479cf9  0x094750eb  0x08c3f645  0x08c3fcab
                  0x08c2b235  0x08c38f65  0x08ea810b  0x08ea8481  0x08ea85f7  0x08f41adc  0x0806e6cf
    Process:      IP Thread, NUMHOG: 4, MAXHOG: 14, LASTHOG: 14
    LASTHOG At:   07:28:24 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a8c2  0x0947a399  0x0946d24d  0x0946d364  0x08c2b0e6  0x08c38f65  0x08ea810b
                  0x08ea8481  0x08ea85f7  0x08ea5f86  0x090e086e  0x090e0b6e  0x090b9a99  0x090b6b00
    Process:      Unicorn Admin Handler, PROC_PC_TOTAL: 22, MAXHOG: 180, LASTHOG: 64
    LASTHOG At:   07:28:24 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Process:      IP Thread, NUMHOG: 4, MAXHOG: 64, LASTHOG: 64
    LASTHOG At:   07:28:24 UTC Oct 19 2013
    PC:           0x0806a8c2 (suspend)
    Call stack:   0x0806a8c2  0x0947a3e4  0x09479cf9  0x094750eb  0x08c3f645  0x08c3fcab  0x08c2b235
                  0x08c38f65  0x08ea810b  0x08ea8481  0x08ea85f7  0x08ea5f86  0x090e086e  0x090e0b6e
    CPU hog threshold (msec): 10.240
    Last cleared: None
    ------------------ show process ------------------
        PC       SP       STATE       Runtime    SBASE     Stack Process
    Lwe 0x08058ba4 0xc82baf84 0x0a345788          0 0xc82b7078 15760/16384 block_diag
    Mrd 0x081e1e11 0xc82ed54c 0x0a346144     430188 0xc82cd6e0 120548/131072 Dispatch Unit
    Msi 0x087509a4 0xc82fdcb4 0x0a3458b0        713 0xc82f9da8 15688/16384 WebVPN KCD Process
    Msi 0x09200c7b 0xc839b3d4 0x0a3458b0       3466 0xc83974c8 15688/16384 y88acs06 OneSec Thread
    Mwe 0x080718dd 0xc83a3804 0x0a3458b0          0 0xc839f948 15808/16384 Reload Control Thread
    Mwe 0x080849b9 0xc83ae79c 0x0a346e2c          0 0xc83aabe0 15256/16384 aaa
    Mwe 0x08f4212d 0xc8d3d1e4 0x0a3458b0          9 0xc83aed78 15056/16384 UserFromCert Thread
    Mwe 0x08f4212d 0xc9003fe4 0x0a3458b0         14 0xc83b2f50 14528/16384 aaa_shim_thread
    Mwe 0x080b477c 0xc83bfa1c 0x0a347eb4          0 0xc83bbb20 15760/16384 CMGR Server Process
    Mwe 0x080b6ded 0xc83c3b64 0x0a3458b0          0 0xc83bfcb8 15832/16384 CMGR Timer Process
    Lwe 0x081e0474 0xc83d83bc 0x0a3568e0          0 0xc83d44b0 15488/16384 dbgtrace
    Mwe 0x084de0ed 0xc83ef574 0x0a3458b0          0 0xc83e76d8 31680/32768 idfw_proc
    Mwe 0x084ea35b 0xc83f75b4 0x0a3458b0          0 0xc83ef708 32216/32768 idfw_service
    Mwe 0x084f5fc5 0xc83fb70c 0x0a3458b0          0 0xc83f78a0 15524/16384 idfw_adagent
    Mwe 0x085351b5 0xc84038dc 0x0a3458b0         89 0xc83ffbd0 11568/16384 eswilp_svi_init
    Mwe 0x08f4212d 0xc8770564 0x0a3458b0          0 0xc8433aa0 15280/16384 netfs_thread_init
    Mwe 0x09576795 0xc844c10c 0x0a3458b0          0 0xc8448290 15848/16384 Chunk Manager
    Msi 0x08ae10be 0xc84508ac 0x0a3458b0       3523 0xc844c9c0 15656/16384 PIX Garbage Collector
    Mwe 0x08ac328a 0xc8461a0c 0x0a1d5d24          0 0xc845db00 16104/16384 IP Address Assign
    Mwe 0x08d0477a 0xc85f7534 0x0a251838          0 0xc85f3628 16104/16384 QoS Support Module
    Mwe 0x08b5c32a 0xc85fb70c 0x0a1d6c88          0 0xc85f7800 16104/16384 Client Update Task
    Lwe 0x095d54f5 0xc860009c 0x0a3458b0     109750 0xc85fc1f0 14448/16384 Checkheaps
    Mwe 0x08d093ed 0xc861080c 0x0a3458b0        454 0xc86089a0 19328/32768 Quack process
    Mwe 0x08d8569d 0xc86189c4 0x0a3458b0        533 0xc8610b38 31952/32768 Session Manager
    Mwe 0x08ed964d 0xc8620cd4 0xcadf5b08          8 0xc861ce68 15464/16384 uauth
    Mwe 0x08e66621 0xc8624f0c 0x0a264a10          0 0xc8621000 15632/16384 Uauth_Proxy
    Msp 0x08ea87de 0xc86313d4 0x0a3458b0        561 0xc862d4c8 15688/16384 SSL
    Mwe 0x08ed72d4 0xc863554c 0x0a26bc14          0 0xc8631660 15708/16384 SMTP
    Mwe 0x08ed170c 0xc86396a4 0x0a26af38      23255 0xc86357f8 13608/16384 Logger
    Mwe 0x08ecfd1d 0xc863d80c 0x0a3458b0          0 0xc8639990 15784/16384  Syslog Retry Thread
    Mwe 0x08ecadf5 0xc86419d4 0x0a3458b0          0 0xc863db28 15600/16384 Thread Logger
    Mwe 0x08ed50b4 0xc866457c 0x0a26b5e0          0 0xc8660680 15464/16384 syslogd
    Mwe 0x09132032 0xc8681094 0x0a2a5688          0 0xc867d1a8 15328/16384 vpnlb_thread
    Mwe 0x092037ec 0xc86916c4 0x0a2aa9e8          0 0xc868d808 16024/16384 pci_nt_bridge
    Mwe 0x082beb95 0xc8756e44 0x0a3458b0          0 0xc8752fb8 15864/16384 TLS Proxy Inspector
    Msi 0x08da221c 0xc87d44a4 0x0a3458b0       2749 0xc87d0598 15688/16384 emweb/cifs_timer
    Mwe 0x08852cc4 0xc88291f4 0x0a1c4c44          0 0xc88252f8 15712/16384 netfs_mount_handler
    Msi 0x086b4248 0xc8316454 0x0a3458b0      27304 0xc8312568 15312/16384 arp_timer
    Mwe 0x086bc58e 0xc8447fb4 0x0a371110          0 0xc84440f8 16024/16384 arp_forward_thread
    Mwe 0x08eddb77 0xc8f2e27c 0x0a26c680          0 0xc8f2a380 15672/16384 tcp_fast
    Mwe 0x08ee69a8 0xc8f3229c 0x0a26c680          0 0xc8f2e3b0 15656/16384 tcp_slow
    Mwe 0x08f1df34 0xc8f42fac 0x0a2745d0          0 0xc8f3f0b0 16000/16384 udp_timer
    Mwe 0x0814110d 0xc8fb133c 0xc83ca8d0          4 0xc8fad4a0 15664/16384 IPsec message handler
    Mwe 0x087515c6 0xc8fdc834 0x0a376060          1 0xc8fd8958 16056/16384 Lic TMR
    Mwe 0x087513bc 0xc8fe0884 0x0a1c0ea0        242 0xc8fdc988 16088/16384 Lic HA
    Msi 0x08153267 0xc84270dc 0x0a3458b0      54986 0xc8423440 13872/16384 CTM message handler
    Mwe 0x0811bd2d 0xc843bb8c 0x0a3458b0          0 0xc8437ce0 15832/16384 CTCP Timer process
    Mwe 0x090d3d95 0xc843fbac 0x0a3458b0          0 0xc843bd10 15816/16384 L2TP data daemon
    Mwe 0x090d6605 0xc9b5b24c 0x0a3458b0          0 0xc9b573b0 15816/16384 L2TP mgmt daemon
    Mwe 0x090c2b27 0xc9b9339c 0x0a29a3ec       2228 0xc9b8f4e0 15480/16384 ppp_timer_thread
    Msi 0x0913239d 0xc9b973ec 0x0a3458b0       4093 0xc9b93510 15640/16384 vpnlb_timer_thread
    Mwe 0x081c7708 0xc9c67c84 0x0a13ef88       2899 0xc9c47f18 118548/131072 tmatch compile thread
    Mwe 0x08d38b2d 0xcac940cc 0x0a3458b0          0 0xcac90210 15848/16384 ICMP event handler
    Mwe 0x0908081d 0xcac98254 0x0a3458b0          0 0xcac943a8 15832/16384 Dynamic Filter VC Housekeeper
    Mwe 0x08a1b612 0xcacc47f4 0x0a3458b0        819 0xcacc0938 13860/16384 IP Background
    Mwe 0x08c26e63 0xcaed904c 0x0a3458b0          0 0xcaed51a0 15832/16384 Crypto CA
    Mwe 0x08c60c18 0xcaedd1e4 0x0a3458b0          0 0xcaed9338 15896/16384 CERT API
    Mwe 0x08c257d5 0xcaee6e24 0x0a3458b0          0 0xcaee2f58 15928/16384 Crypto PKI RECV
    Mwe 0x0878dd85 0xc862d1cc 0x0a3458b0        187 0xc8629330 15272/16384 ESW_MRVL switch interrupt service
    Mwe 0x08cae62c 0xc866c89c 0x0a1ea7e0          0 0xc86689b0 15832/16384 lina_int
    Mrd 0x0959948b 0xc8684f1c 0x0a346144   28493079 0xc8681340 13824/16384 esw_stats
    Lsi 0x08af3199 0xc86958bc 0x0a3458b0        152 0xc86919a0 15704/16384 uauth_urlb clean
    Lwe 0x08acbd76 0xc83ff8b4 0x0a3458b0       4432 0xc83fba38 14308/16384 pm_timer_thread
    Mwe 0x08555f8d 0xc8418b0c 0x0a3458b0          0 0xc8414c60 15832/16384 IKE Common thread
    Mwe 0x0858cecd 0xcaf8688c 0x0a3458b0          0 0xcaf82a60 15704/16384 IKE Timekeeper
    Mwe 0x0857bad1 0xcaf8ccc4 0x0a1bc678          1 0xcaf890e8 12116/16384 IKE Daemon
    Mwe 0x08629eb3 0xcaf90c64 0x0a3458b0        964 0xcaf8d118 14744/16384 IKEv2 Daemon
    Mwe 0x08628e7c 0xcaf94ff4 0x0a3458b0       1095 0xcaf91148 15640/16384 IKEv2 DPD Client Process
    Mwe 0x08e7d2e4 0xcafafd7c 0x0a2690f4          0 0xcafabe90 16072/16384 RADIUS Proxy Event Daemon
    Mwe 0x08e41f35 0xcafb3d74 0xcb07e358          7 0xcafb0028 14912/16384 RADIUS Proxy Listener
    Mwe 0x08e7ca0d 0xcafb806c 0x0a3458b0          0 0xcafb41c0 15832/16384 RADIUS Proxy Time Keeper
    Mwe 0x086a1e44 0xcafbc184 0x0a3710c8          0 0xcafb8358 15264/16384 Integrity FW Task
    Mrd 0x082c923a 0xcaffce54 0x0a346144          0 0xcaff8f98 14552/16384 CP Threat-Detection Processing
    Mwe 0x081fb74e 0xcb0cc4bc 0x09c4a8bc       2497 0xcb0acd60 122448/131072 ci/console
    Msi 0x08b0ea8c 0xcb0d0e14 0x0a3458b0     217583 0xcb0ccef8 14004/16384 update_cpu_usage
    Mwe 0x08ef5ff5 0xcb0d4ecc 0x0a3458b0         77 0xcb0d1090 15360/16384 npshim_thread
    Msi 0x08b0eb14 0xcb0e1224 0x0a3458b0          0 0xcb0dd428 13104/16384 NIC status poll
    Mwe 0x08dd5f2c 0xcb0e54bc 0x0a259ec8        228 0xcb0e15c0 15540/16384 SNMP Notify Thread
    Mwe 0x086aba0e 0xcb12ebe4 0x0a37170c     235813 0xcb126d08 25428/32768 IP Thread
    Mwe 0x086b31fe 0xcb132d9c 0x0a371100       9150 0xcb12eea0 9700/16384 ARP Thread
    Mwe 0x084be3ae 0xcb136f8c 0x0a3716c8       1743 0xcb1331b0 12696/16384 icmp_thread
    Mwe 0x08f1f443 0xcb13b1e4 0x0a3458b0        158 0xcb137348 15728/16384 udp_thread
    Mwe 0x08ee0f44 0xcb13f0bc 0x0a37178c          0 0xcb13b4e0 15288/16384 tcp_thread
    Mwe 0x08f4212d 0xcb1bccd4 0x0a3458b0      12848 0xcb13fd70 26600/32768 rtcli async executor process
    Mwe 0x090e408d 0xcb4dff64 0x0a3458b0          0 0xcb4dc0a8 14608/16384 PPPOE background daemon
    Mwe 0x090e53c4 0xcb4e3fb4 0x0a29aa4c          1 0xcb4e00d8 14656/16384 PPPOE CLI daemon
    Mwe 0x0824ff45 0xcb501e4c 0x0a3458b0        258 0xcb4fdf90 15624/16384 Timekeeper
    Mwe 0x08e41f35 0xcb89a6d4 0xcb89eb10          7 0xcb896998 15392/16384 EAPoUDP-sock
    Mwe 0x0822323d 0xcb89e544 0x0a3458b0          0 0xcb89a9c8 15016/16384 EAPoUDP
    Mwe 0x08204371 0xcb3df9dc 0x0a3458b0        149 0xcb3dbb20 15168/16384 DHCPD Timer
    Mwe 0x082066a1 0xcb3e6404 0x0a3458b0       1286 0xcb3e25a8 7172/16384 dhcp_daemon
    Mwe 0x0910dfd4 0xcbc3b4e4 0x0a2a5380          0 0xcbc335e8 32472/32768 vpnfol_thread_msg
    Msi 0x09116252 0xcbc3fac4 0x0a3458b0       2657 0xcbc3bbd8 15656/16384 vpnfol_thread_timer
    Mwe 0x09114882 0xcbc44074 0x0a2a53c0          0 0xcbc401c8 16008/16384 vpnfol_thread_sync
    Msi 0x09115fdc 0xcbc486b4 0x0a3458b0      11061 0xcbc447b8 15672/16384 vpnfol_thread_unsent
    Mwe 0x0869e365 0xc8689384 0x0a3458b0          0 0xc86854d8 15832/16384 Integrity Fw Timer Thread
    Msi 0x08852fd6 0xc868d55c 0x0a3458b0        206 0xc8689670 15656/16384 netfs_vnode_reclaim
    Mwe 0x08f4212d 0xcb2a1914 0x0a3458b0       1277 0xcbd38510 15008/16384 Unicorn Proxy Thread
    Mwe 0x0825afcb 0xcbc61254 0x0a3458b0        335 0xcbc5d788 14272/16384 emweb/https
    Mwe 0x08eef828 0xcbd4dd0c 0xcbd4fd7c          0 0xcbd49fd0 14888/16384 listen/telnet
    Mwe 0x08aac530 0xcbdbd754 0xcbd6c9fc        102 0xcbd9def8 127432/131072 Unicorn Admin Handler
    Mwe 0x08aab345 0xcbddd644 0x0a3458b0        105 0xcbdbdf28 123712/131072 Unicorn Admin Handler
    Mwe 0x08cd7c6f 0xcaf358cc 0x0a49edc8          0 0xcaf31bb0 15384/16384 qos_metric_daemon
    Mwe 0x08218c82 0xcb2693fc 0x0a3458b0          3 0xcb265560 13248/16384 DHCP Client
    Mwe 0x08f1d929 0xcb4bb0fc 0xc8f3ece4          0 0xcb4b3300 31552/32768 DHCPC Receiver
    M*  0x08a86f55 0xdcc1df2c 0x0a346144        274 0xcb34deb8 19696/32768 telnet/ci
    -           -          -          -          0          -      -      DATAPATH-0-455
    -           -          -          -  744377118          -      -      scheduler
    -           -          -          -  774156778          -      -      total elapsed
    ------------------ show kernel process ------------------
    PID PPID PRI NI      VSIZE      RSS      WCHAN STAT  RUNTIME COMMAND
      1    0  20  0    2080768      616 3725686580    S      630 init
      2    0  15 -5          0        0 3725738556    S        0 kthreadd
      3    2  15 -5          0        0 3725692956    S        0 ksoftirqd/0
      4    2  15 -5          0        0 3725728656    S        0 events/0
      5    2  15 -5          0        0 3725728656    S        0 khelper
    50    2  15 -5          0        0 3725728656    S        0 kblockd/0
    53    2  15 -5          0        0 3726777703    S        0 kseriod
    99    2  20  0          0        0 3725848262    S        0 pdflush
    100    2  20  0          0        0 3725848262    S        0 pdflush
    101    2  15 -5          0        0 3725861131    S        0 kswapd0
    102    2  15 -5          0        0 3725728656    S        0 aio/0
    103    2  15 -5          0        0 3725728656    S        0 nfsiod
    214    2  15 -5          0        0 3725728656    S        0 hid_compat
    215    2  15 -5          0        0 3725728656    S        0 rpciod/0
    240    1  16 -4    1789952      600 3725997327    S        4 udevd
    272  240  18 -2    1785856      564 3725997327    S        0 udevd
    277  240  18 -2    1785856      552 3725997327    S        0 udevd
    421    1  20  0    5201920     1600 4294967295    S       11 lwsmd
    423  421  20  0   16736256     3600 4294967295    S      102 lwregd
    448    1  20  0    2084864      512 3725686580    S        1 sh
    449  448  20  0   10186752      528 4294967295    S        2 lina_monitor
    451  449   0 -20  440270848    53000 4294967295    S 77713055 lina
    ------------------ show kernel cgroup-controller detail ------------------
    memory controller:
    memory.limit_in_bytes: unlimited
    memory.usage_in_bytes: 61665280   (11%)
    memory.max_usage_in_bytes: 64245760   (12%)
    memory.failcnt: 0
    tasks:
    group "normal"
      memory.limit_in_bytes: unlimited
      memory.usage_in_bytes: 77824   (0%)
      memory.max_usage_in_bytes: 544768   (0%)
      memory.failcnt: 0
      tasks:
           PID         RSS COMMAND                      
             1      630784 init                         
             2           0 kthreadd                     
             3           0 ksoftirqd/0                  
             4           0 events/0                     
             5           0 khelper                      
            50           0 kblockd/0                    
            53           0 kseriod                      
            99           0 pdflush                      
           100           0 pdflush                      
           101           0 kswapd0                      
           102           0 aio/0                        
           103           0 nfsiod                       
           214           0 hid_compat                   
           215           0 rpciod/0                     
           240      614400 udevd                        
           272      577536 udevd                        
           277      565248 udevd                        
           448      524288 sh                           
    group "privileged"
      memory.limit_in_bytes: unlimited
      memory.usage_in_bytes: 22327296   (4%)
      memory.max_usage_in_bytes: 22515712   (4%)
      memory.failcnt: 0
      tasks:
           PID         RSS COMMAND                      
           449      540672 lina_monitor                 
           450           0 lina_monitor                 
           451    54280192 lina                         
           452           0 lina                         
           453           0 lina                         
           454           0 lina                         
           455           0 lina                         
    group "restricted"
      memory.limit_in_bytes: 23068672   (4%)
      memory.usage_in_bytes: 1724416   (0%)
      memory.max_usage_in_bytes: 1900544   (0%)
      memory.failcnt: 0
      tasks:
           PID         RSS COMMAND                      
           421     1638400 lwsmd                        
           422           0 lwsmd                        
           423     3686400 lwregd                       
           425           0 lwregd                       
           426           0 lwregd                       
           427           0 lwregd                       
           428           0 lwregd                       
           429           0 lwregd                       
           430           0 lwsmd                        
           431           0 lwsmd                        
           432           0 lwsmd                        
           433           0 lwsmd                        
           434           0 lwsmd                        
    cpu controller:
    cpu.shares: 1024
    cpuacct.usage: 777015353084076
    tasks:
    group "normal"
      cpu.shares: 1024
      cpuacct.usage: 53525955783   (0%)
    tasks:
           PID         RSS COMMAND                      
             1      630784 init                         
             2           0 kthreadd                     
             3           0 ksoftirqd/0                  
             4           0 events/0                     
             5           0 khelper                      
            50           0 kblockd/0                    
            53           0 kseriod                      
            99           0 pdflush                      
           100           0 pdflush                      
           101           0 kswapd0                      
           102           0 aio/0                        
           103           0 nfsiod                       
           214           0 hid_compat                   
           215           0 rpciod/0                     
           240      614400 udevd                        
           272      577536 udevd                        
           277      565248 udevd                        
           448      524288 sh                           
           449      540672 lina_monitor                 
           450           0 lina_monitor                 
           451    54280192 lina                         
           452           0 lina                         
           453           0 lina                         
           454           0 lina                         
    group "privileged"
      cpu.shares: 16384
      cpuacct.usage: 776952528547140   (100%)
      tasks:
           PID         RSS COMMAND                      
           455           0 lina                         
    group "restricted"
      cpu.shares: 1024
      cpuacct.usage: 1291957168   (0%)
      tasks:
           PID         RSS COMMAND                      
           421     1638400 lwsmd                        
           422           0 lwsmd                        
           423     3686400 lwregd                       
           425           0 lwregd                       
           426           0 lwregd                       
           427           0 lwregd                       
           428           0 lwregd                       
           429           0 lwregd                       
           430           0 lwsmd                        
           431           0 lwsmd                        
           432           0 lwsmd                        
           433           0 lwsmd                        
           434           0 lwsmd                        
    ------------------ show traffic ------------------
    inside:
    received (in 422169.300 secs):
    4183910 packets          523687951 bytes
    9 pkts/sec          1006 bytes/sec
    transmitted (in 422169.300 secs):
    5702974 packets          5851550584 bytes
    3 pkts/sec          13006 bytes/sec
          1 minute input rate 22 pkts/sec,  2839 bytes/sec
          1 minute output rate 30 pkts/sec,  22751 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 33 pkts/sec,  3746 bytes/sec
          5 minute output rate 46 pkts/sec,  20906 bytes/sec
          5 minute drop rate, 1 pkts/sec
    outside:
    received (in 422169.300 secs):
    10542135 packets          11433861540 bytes
    4 pkts/sec          27002 bytes/sec
    transmitted (in 422169.300 secs):
    3793870 packets          526596330 bytes
    8 pkts/sec          1003 bytes/sec
          1 minute input rate 47 pkts/sec,  41657 bytes/sec
          1 minute output rate 18 pkts/sec,  2802 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 80 pkts/sec,  38519 bytes/sec
          5 minute output rate 29 pkts/sec,  3749 bytes/sec
          5 minute drop rate, 0 pkts/sec
    _internal_loopback:
    received (in 422168.950 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
    transmitted (in 422168.950 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
          1 minute input rate 0 pkts/sec,  0 bytes/sec
          1 minute output rate 0 pkts/sec,  0 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Aggregated Traffic on Physical Interface
    Ethernet0/0:
    received (in 776992.730 secs):
    8257731 packets          9051312645 bytes
    5 pkts/sec          11002 bytes/sec
    transmitted (in 776992.730 secs):
    6399342 packets          1011145708 bytes
    2 pkts/sec          1002 bytes/sec
          1 minute input rate 26 pkts/sec,  24481 bytes/sec
          1 minute output rate 20 pkts/sec,  3472 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 40 pkts/sec,  20147 bytes/sec
          5 minute output rate 29 pkts/sec,  4280 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/1:
    received (in 776992.730 secs):
    1330771 packets          312271947 bytes
    1 pkts/sec          3 bytes/sec
    transmitted (in 776992.730 secs):
    1738316 packets          638003030 bytes
    2 pkts/sec          3 bytes/sec
          1 minute input rate 4 pkts/sec,  405 bytes/sec
          1 minute output rate 11 pkts/sec,  3333 bytes/sec
    <--- More --->
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 7 pkts/sec,  735 bytes/sec
          5 minute output rate 13 pkts/sec,  4410 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/2:
    received (in 776993.220 secs):
    5028958 packets          693527818 bytes
    0 pkts/sec          2 bytes/sec
    transmitted (in 776993.220 secs):
    7782202 packets          8316039741 bytes
    4 pkts/sec          10000 bytes/sec
          1 minute input rate 1 pkts/sec,  153 bytes/sec
          1 minute output rate 2 pkts/sec,  391 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 1 pkts/sec,  187 bytes/sec
          5 minute output rate 3 pkts/sec,  1011 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/3:
    received (in 776993.220 secs):
    17219822 packets          21609826615 bytes
    0 pkts/sec          27005 bytes/sec
    transmitted (in 776993.220 secs):
    8373382 packets          5142266559 bytes
    5 pkts/sec          6004 bytes/sec
    <--- More --->
          1 minute input rate 8384 pkts/sec,  12695156 bytes/sec
          1 minute output rate 2657 pkts/sec,  203156 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 8010 pkts/sec,  12112337 bytes/sec
          5 minute output rate 2525 pkts/sec,  188122 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/4:
    received (in 776993.680 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
    transmitted (in 776993.680 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
          1 minute input rate 0 pkts/sec,  0 bytes/sec
          1 minute output rate 0 pkts/sec,  0 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/5:
    received (in 776993.690 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
    transmitted (in 776993.690 secs):
    <--- More --->
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
          1 minute input rate 0 pkts/sec,  0 bytes/sec
          1 minute output rate 0 pkts/sec,  0 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/6:
    received (in 776994.140 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
    transmitted (in 776994.140 secs):
    0 packets          0 bytes
    0 pkts/sec          0 bytes/sec
          1 minute input rate 0 pkts/sec,  0 bytes/sec
          1 minute output rate 0 pkts/sec,  0 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Ethernet0/7:
    received (in 776994.140 secs):
    7328915 packets          4524298170 bytes
    <--- More --->
    3 pkts/sec          5004 bytes/sec
    transmitted (in 776994.140 secs):
    16345245 packets          21405489647 bytes
    4 pkts/sec          27001 bytes/sec
          1 minute input rate 2330 pkts/sec,  158045 bytes/sec
          1 minute output rate 7422 pkts/sec,  11264540 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 2481 pkts/sec,  168427 bytes/sec
          5 minute output rate 7977 pkts/sec,  12105867 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Internal-Data0/0:
    received (in 776994.640 secs):
    15222548 packets          10134365294 bytes
    3 pkts/sec          13004 bytes/sec
    transmitted (in 776994.640 secs):
    15128813 packets          10256961010 bytes
    2 pkts/sec          13001 bytes/sec
          1 minute input rate 45 pkts/sec,  24860 bytes/sec
          1 minute output rate 49 pkts/sec,  26647 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 73 pkts/sec,  24918 bytes/sec
          5 minute output rate 75 pkts/sec,  26334 bytes/sec
          5 minute drop rate, 0 pkts/sec
    Internal-Data0/1:
    <--- More --->
    received (in 776994.640 secs):
    15128721 packets          10256943282 bytes
    2 pkts/sec          13001 bytes/sec
    transmitted (in 776994.640 secs):
    15222455 packets          10134357062 bytes
    3 pkts/sec          13004 bytes/sec
          1 minute input rate 48 pkts/sec,  26530 bytes/sec
          1 minute output rate 45 pkts/sec,  24826 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 75 pkts/sec,  26323 bytes/sec
          5 minute output rate 73 pkts/sec,  24908 bytes/sec
          5 minute drop rate, 0 pkts/sec
    ------------------ show perfmon ------------------
    PERFMON STATS:                     Current      Average
    Xlates                                0/s          0/s
    Connections                           0/s          0/s
    TCP Conns                             0/s          0/s
    UDP Conns                             0/s          0/s
    URL Access                            0/s          0/s
    URL Server Req       

  • Cisco ASA 5505 peculiarities

    I am just starting out using a Cisco ASA 5505 device, but have to say that I have encountered some peculiarities with the software.
    To start, when I try to connect to the device from my Microsoft Windows XP service pack 3 machine via the Cisco ASDM Launcher that it tries to connect and then fails with the typical error message saying to check the configuration or connection.
    After playing around with the settings on the GUI I discovered that clearing the internal log buffer would then enable the Launcher to connect to the device without a hitch.  Apparently garbage in the internal log buffer is interfering with connecting?
    Next I found that not only me, but other users were having problems using the ASA5505 with a static IP modem.  Initially I thought it was just me, but then did the Google search to discover that about a dozen other people had the same identical problem.  I didn't feel so bad then.  After some reading of other tips and information, after exhausting the Cisco documents dry, I did find one person who said to set the NAT table.
    That almost fixed the problem.  Things started working after I opened up the outside interface net mask.  (and strangely enough kept working after I narrowed back down from 255.255.255.240 to 255.255.255.248)
    Things were cruising along, until I saw a computer on the other side of my company's gateway try to connect to one in the LAN.  This forced me to create an access rule (or so I thought) and immediately all the local computers lost connectivity with the DNSs and thus with the internet.
    Strangely enough, while looking at the log file, I did see that the packets were being dropped due to an access list violation, but which access list??  I didn't create any, so I thought, and chasing down the access lists led to nothing.
    Slowly I realized that the Cisco firmware was creating its own internal access control lists, from the rules that I created in the Security rules section of the GUI.  How about letting the poor administrator see those access lists?  I would like to feel that I really can administer the machine, not be a hapless victim of some "user friendly" software.
    So I had to play around with the rules for awhile, until I was able to successfully allow access to the local group, but block any connection attempts from the sister LAN (thanks Microsoft for your windows browser protocols and file sharing which causes the computers to connect to every other MS OS computer in the world)
    Another nit pick that I had is when I saw the security rules that let the inside interface have access to every other low security interface.  Clicking upon that interface never showed just exactly how this is done.  Did someone forget to put some of the CLI software into the ASDM GUI software?  I strongly suspect that CLI was how all this originally started, but its feature rich command set just didn't quite make it into the GUI software?  Anyone listening?
    I do appreciate that Cisco did allow CLI from the GUI.
    The start up guide that came with the ASA was only 50% usable, due to the fact that I had to work into a static IP, not DHCP.  I would like to see Cisco add a section in Chapter 5 to address this type of configuration for their first time people.
    Finally, I would like to see that irritating internal log buffer flush problem fixed so my ASDM launcher will always connect the first time.
    Thanks for bearing with me, I would give the software overall a 80% rating.  More discussion needs to be shown about how the device is really working with the default settings, and I would like to some more administration control of those "automatic" access control lists.
    Randall

    I am just starting out using a Cisco ASA 5505 device, but have to say that I have encountered some peculiarities with the software.
    To start, when I try to connect to the device from my Microsoft Windows XP service pack 3 machine via the Cisco ASDM Launcher that it tries to connect and then fails with the typical error message saying to check the configuration or connection.
    After playing around with the settings on the GUI I discovered that clearing the internal log buffer would then enable the Launcher to connect to the device without a hitch.  Apparently garbage in the internal log buffer is interfering with connecting?
    Next I found that not only me, but other users were having problems using the ASA5505 with a static IP modem.  Initially I thought it was just me, but then did the Google search to discover that about a dozen other people had the same identical problem.  I didn't feel so bad then.  After some reading of other tips and information, after exhausting the Cisco documents dry, I did find one person who said to set the NAT table.
    That almost fixed the problem.  Things started working after I opened up the outside interface net mask.  (and strangely enough kept working after I narrowed back down from 255.255.255.240 to 255.255.255.248)
    Things were cruising along, until I saw a computer on the other side of my company's gateway try to connect to one in the LAN.  This forced me to create an access rule (or so I thought) and immediately all the local computers lost connectivity with the DNSs and thus with the internet.
    Strangely enough, while looking at the log file, I did see that the packets were being dropped due to an access list violation, but which access list??  I didn't create any, so I thought, and chasing down the access lists led to nothing.
    Slowly I realized that the Cisco firmware was creating its own internal access control lists, from the rules that I created in the Security rules section of the GUI.  How about letting the poor administrator see those access lists?  I would like to feel that I really can administer the machine, not be a hapless victim of some "user friendly" software.
    So I had to play around with the rules for awhile, until I was able to successfully allow access to the local group, but block any connection attempts from the sister LAN (thanks Microsoft for your windows browser protocols and file sharing which causes the computers to connect to every other MS OS computer in the world)
    Another nit pick that I had is when I saw the security rules that let the inside interface have access to every other low security interface.  Clicking upon that interface never showed just exactly how this is done.  Did someone forget to put some of the CLI software into the ASDM GUI software?  I strongly suspect that CLI was how all this originally started, but its feature rich command set just didn't quite make it into the GUI software?  Anyone listening?
    I do appreciate that Cisco did allow CLI from the GUI.
    The start up guide that came with the ASA was only 50% usable, due to the fact that I had to work into a static IP, not DHCP.  I would like to see Cisco add a section in Chapter 5 to address this type of configuration for their first time people.
    Finally, I would like to see that irritating internal log buffer flush problem fixed so my ASDM launcher will always connect the first time.
    Thanks for bearing with me, I would give the software overall a 80% rating.  More discussion needs to be shown about how the device is really working with the default settings, and I would like to some more administration control of those "automatic" access control lists.
    Randall

Maybe you are looking for

  • HT4864 How can I change my iCloud email to my AppleID email they are not the same

    How can I change my iCloud email to my AppleID email?  They are not the same and somehow were switched by my teenage daughter.  I can access the account and change anything except my iCloud eMail account.

  • Airport Extreme problems--drops connection and can't change password

    Hi, I am having multiple problems with my Airport Extreme (n) base station. All of these problems occur on all three of my machines. MacBook Pro 2007 model, MacBook Pro i7 2.66, and iMac 24". 1. Sometimes the airport connection works, but then drops

  • Ticker Advice

    Anyone know of a good news ticker component? (Or a straightforward way of coding one in AS3?) We need to incorporate a horizontal ticker at the bottom of a site. It doesn't need to feed RSS. It'll just be populated with little factoids the client wil

  • Blue Ray Question

    Hs anyone used a Blue-Ray (internal or External) Optical Drive reader successfully in Windows on a Mac Pro?

  • .icc specifications in photoshop cs6?

    We are trying to set up a solid color pipeline using ACES in Photoshop.  We are having trouble actually implementing the pipe in Photoshop and would appreciate some help.  The .icc profiles that we are creating are not recognised as valid rgb working