Cisco ASA 8.3 ldap AAA server setup Microsoft active directory fails

Hello,
I'm trying to set up ldap authentication for remote ssl vpn users like the picture below:
When I try the test button, and enter any username and password I get the message "Authentication Rejected: User was not found"
Why??? Please help, I'm running out of options here... Many many thanks in advance.

Use the login DN in the following format.
admin-user-name@domain_name and let me know how it goes.
If the above suggestion doesn't work then please run the debug ldap 255 and paste the output here.
Rgds, Jatin
Do rate helpful posts-

Similar Messages

Does Sun Messaging Server support Microsoft Active Directory

Hello,
I just got this qustion. Does Sun Messaging Server work with Microsoft Active Directory?
Thanks.

Please post in the messaging server forum: [http://forums.sun.com/forum.jspa?forumID=708|http://forums.sun.com/forum.jspa?forumID=708]

Cut-Through Proxy / Authentication Proxy on Cisco ASA using ISE as AAA Server for allocating SGTs

Hi,
We are trying to setup ASA to do cut-through authentication proxy, and use ISE as RADIUS. We can successfully authenticate the user from Radius on the ASA, while he opens a web-page, but then it displays the error: authorization denied.
What we want:
ISE to allocate a security group tag to the user session when he logs in, that tag would carried within out cisco network infrastrucutre to define the access
policy for that user.
Can someone please help me with a sort of step by step thing for ISE configuration to allocate SGTs/SGACL for the user session after authentication is completed.
Thanks
Lovleen

Please refer to below step by step config guide for security group access policies
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_sga_pol.html

Can't connect to Small Business Server 2003 via Active Directory

I have done lots of searching, both in these forums and the wider internet, and cannot find a solution to my specific problem.
I am trying to connect my G5 (10.3.9) to a Windows network. We have a Microsoft Small Business Server 2003 with Active Directory. The PCs have no problem using this, and I can connect to shares setup on the server via AFP.
But I am having problems when I try to configure the AD plug-in in Directory Access on the Mac. When I click 'Bind', I enter the Server's Administrator username & password and when I click 'OK', it gets to Step 3 of 5 "Verifying Credentials". It ticks away at this step for about 30 seconds, then comes up with error message saying "Invalid user name and password combination."
I have tried other users with admin privileges, but they don't work either. I know the usernames and passwords aren't invalid, because I created them. I have tried fiddling around with other settings in the AD setup, but nothing gets any further.
Without any other 3rd party software (that's my final option), is there something I need to check/change, either on the Mac or the server, to make this Mac to authenticate via AD? Please help!

Hi Andbrowny, thanks for your response.
Your advice didn't really help my Active Directory problem (AD doesn't require SMB does it?), but it gave me some progress on my SMB problem. I can connect via AFP, but previously when I tried to connect via SMB, it kept coming up with the error "Could not connect to the server because the name or password is not correct".
Now, after changing the policies on the server, I get an error -43 message saying "The operation could not be completed because one or more required items cannot be found."
So now I have two problems! SMB is not finding something it needs, and Active Directory is not "verifying credentials".
Actually, I have three problems: When I am connected via AFP, filenames over 31 characters long are truncated on the server, and I can't copy long filenames onto the server without renaming them. I have read that SMB would fix this to a degree (256 characters for the complete file path), but is there anything (a protocol or software) that allows long filenames to be read/written with ease?
Side note: The server is not 100% configured, the bloke installing it still has some work to do, but Active Directory works for all the XP machines, and I can connect to each XP workstation with SMB.

Cisco ISE (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out)

Hi,
I have a setup ISE 1.1.1. Users are getting authenticate against AD. Everything is working fine except some users report disconnection. I see in the ISE that (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out). Users are using Windows 7 OS.
Error is enclosed & here is the port configuration.
Port Configuration.
interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30 interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30
Please help.

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

Windows Server 2008 R2 - Active Directory Replication over DynDNS

Hello,
I have one server that Windows Server 2008 R2 - Active Directory / DNS
Now some users shifted to new office with the server
Some users still in the original place that now don't have ADDS/DNS
i want to install one replication server in the original place to retrieve AD/DNS form new office via DynDNS
is that possible of not?
Best regards,

Badr, I don't think you want AD replication occurring over the internet - even if that was possible the server would need access to all the SRV records, a records, And all the ports required for communication - See here for an exhaustive list
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx - I don't think I have to tell you how bad opening all these ports to the internet would be.
You may want to look at Setting up a vpn or DirectAccess from the original site to the new site. This will give you more security and generally won't cost to much.
http://technet.microsoft.com/en-us/network/dd420463.aspx
Another thing that may work for you would be if you setup remote desktop services in the new location and had the original location remote into via a gateway server -
http://blogs.technet.com/b/windowsserver/archive/2012/05/09/windows-server-2012-remote-desktop-services-rds.aspx as a starting point. With RDS your users would be able to access the new location from anywhere, although there would be upfront costs associated,
licensing and server being part of them - I don't recommend turning your domain controller into an RDS server.These are just some ideas to help you with your issue

Cisco ISE Failure: 24408 User authentication against Active Directory failed since user has entered the wrong password

Hi,
Since we implemented Cisco ISE we receive the following failure on several Notebooks:
Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
Why is this happening?
Thanks,
Marc

The possible causes of this error message are:
1.] If the end user entered an incorrect username.
2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
In your cases, the 3rd option seems to be the most closest one.
Jatin Katyal
- Do rate helpful posts -

Configuring Microsoft ACtive Directory in WebLogic server 10.3.3

Hi,
I am working on configuring Microsoft ACtive Directory in WebLogic server 10.3.3. After configuration I couldn't see any AD users in myrealm-users.
If there is any document / step-by-step tutorial available please provide me.
Thanks
MC

Just check the product documentation ;-) The Guide Securing WebLogic Server might be of interest for you.
Here is a link to start with: http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/atn.htm#SECMG175
--olaf

Error when joining a leopard server to an active directory

Hi all,
I'd like to add my mac os x server to an active directory. If I fill the "Active Directory Domain" with ip address, "Unable to add the domain, there was no response from the ip,please check that the address you entered is correct", if I fill with domain name, "Unable to add domain, An unexpected error of type -14987 (eUndefinedError) occurred.
What's going on there???

Hi all,
I'd like to add my mac os x server to an active directory. If I fill the "Active Directory Domain" with ip address, "Unable to add the domain, there was no response from the ip,please check that the address you entered is correct", if I fill with domain name, "Unable to add domain, An unexpected error of type -14987 (eUndefinedError) occurred.
What's going on there???

Directory Security Strange Permissions Issues (Windows Server 2003 running Active Directory)

I have a user that all of a sudden was not able to open 70% of her files located on a file server, Windows Server 2003 running Active Directory, from her laptop. The same user can access all the same files from a different machine, logging on with the same
credentials. Just looking for a point in the right direction and a possible theory as what could cause this problem, an why all of a sudden. I did go back through the logs but nothing sticks out. For the most part the logs on the server and the laptop are
pretty clean.
Both machines are Latitude E5420s running Windows 7 Enterprise Service Pack 1. Both machines are 64bit and connect to the network via hard-wire, not wireless.
Thanks in advanced.
Grajek

I would recommend proceeding that way:
Check that your DCs are in a healthy state and AD replication is fine: It might be that the user is member of security groups and the membership is not getting replicated properly which can cause this random behavior. You can use
dcdiag and repadmin for checks and you can refer to my recommendations here: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
Make sure that the file server is reachable from the user client computer. Start with
ping and nslookup. Also, you need to make sure that the traffic between the client and the server is not blocked or filtered. You might want to temporary disable security software for testing
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Cannot Bind Leopard Server to Windows Active Directory

Trying to Bind new Leopard Server but keep getting an Unknown error. it there an issue with the new Server OS?
This is the error
12/10/07 6:36:37 PM com.apple.launchd[1] (0x0-0x2c02c.com.apple.ServerAdmin4479) Exited abnormally: Segmentation fault
12/10/07 6:37:08 PM Directory Utility236 Step 1 of 6: Searching for Forest/Domain information
12/10/07 6:37:08 PM Directory Utility236 Binding failed with error -14120
12/10/07 6:37:29 PM DirectoryService4626 * +NSCFArray shouldAttemptCheck: unrecognized selector sent to class 0xa0101740
12/10/07 6:37:30 PM com.apple.launchd[1] (com.apple.DirectoryServices4626) Exited abnormally: Bus error

Okay, I have now managed to setup up the server. I did this by creating a Open Directory Master and then binding that to our Active Directory. I have setup Active Directory and LDAP binding on the client Macs.
I then added a user from AD into Workgroup Manager and applied a few preferences. They worked brilliantly. However, the computer Workgroup Manager preferences are not working at all! Is there a different way to add computers to Workgroup Manager (I added them by using the + sign and dragging them in from AD) and is there a way to automatically add a computer once it's joined to the domain, like it goes in to AD?

New Server 2012 install - Active Directory not working properly

We recently converted from 2003 to 2012. Our 2012 R2 server seems to be running fine. We did a DCPROMO on the OLD 2003 DC just fine but now there are all sorts of odd errors (Sharepoint can't authenticate users, Can't run Exchange 2013 on another 2012 server
because it can't find AD, etc.)
on the DC we have a Group Policy error 1096. "Group Policy Object LDAP://CN=User,cn={2B476B3E-2749-4B1B-8EC1-F5672A66F94F},cn=policies,cn=system,DC=mydom,DC=local\\mydom.local\SysVol\mydom.local\Policies\{2B476B3E-2749-4B1B-8EC1-F5672A66F94F}\User\registry.pol"
So far I haven't found anything on how to fix this (and the AD itself.) There are some errors in the DCDIAG log, too:
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\ISD-DC1\netlogon)
         [ISD-DC1] An net use or LsaPolicy operation failed with error 67,
         The network name cannot be found..
Starting test: FrsEvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared. Failing SYSVOL replication problems may cause
         Group Policy problems.
Any suggestions how we can fix these errors are greatly appreciated!

Hi,
Did you migrate the Active Directory from Windows server 2003 to Windows server 2012?
Please refer to this article:
https://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Regards.
Vivian Wang

Lion Server not reading Active Directory Groups reliably

I am trying to upgrade one of our XServes from Snow Leopard Server to Lion Server and am running into a strange issue with our Active Directory based users and Groups.
The current Snow Leopard Server serving files from a XSan volume is running fine, though we find a very long Lag time for Windows users to connect. Once a few users have connected the lag seems to go away, but it is still not nearly as fast as Mac users connecting or Windows connecting to a PC server.
So I have connected a second Xserve to the SAN and performed a clean install of Lion Server. Initially while it would find my Active Directory Groups it would not import any of the users, so obvioulsly no one could connect. In a last ditch effort I installed the beta of 10.7.4, which seemed to resolve the issue for a small group of test users. However as I expanded the test I found that some users would get a message that the were no resources available to them, or they didn't have the correct permissions. This is very strange as everyone is in the same group so should have the same permissions. As a test I took one of the user accounts and created a new share and gave him R/W permission to that share and suddenly all of the shares that he should have had permission to in the first place popped up.
The only thing that I can think of is that we have such a large Active Directory structure that the authentication is timing out or reaching some user limit and stops looking. (we have over 50,000 users and thousands of groups spread through multiple OUs in the AD structure)
The new Server.app in Lion looks nice, but it does not seem to have nearly the robustness of the previous Server Admin tools. For instance, I never needed or wanted to setup a "Golden Triangle" but with Lion it is required. Perviously I could search for AD users or groups and drag them from the search window to the share to assign permission, now even though I've imported the groups and users it needs to search the entire directory when assigning permissions - why can't it see the groups that are already there? Why can I run a dscl search and find a user or group instantly, but the Server.app hangs for 5 minutes and shows 0 results?
Has anyone found a way to make Lion Server work in an enterprise environment?

Yesterday morning I bound a 10.7.4 server to our AD, and in the afternoon I eventually saw all the AD users, groups, etc show in Workgroup Manager. Now, with dscl, I can see all the AD user and group records, and with Workgroup Manager, I can search the groups, users, and computers, but with the Server.app, when trying to create new group of the type "Imported group from another directory", the searches returned nothing. Directory Utility can show all the AD information also. Our AD has thousands of user record, and so it is reasonable that it may take some time for the Mac server to get all the info. But from the add users or groups interface, I just could not get any search results. What could be wrong then?

Query on DNS setup for Active Directory for a new data center

I have third party DNS appliances providing DNS Service for Active Directory (Windows 2008 R2) and there are also secondary DNS servers, which are MS DNS server with a secondary zone configured, for redundancy. I have to setup a new data center
and move servers/services to this data center. In this scenario, can I install a new Microsoft DNS server with a secondary zone and use this as the primary DNS Server for all the member servers at this new location ? I am aware that this new DNS server will
not be able to make any updates to the secondary zone and for that purpose, is there anyway to redirect such requests to the DNS appliances in my current data center across the WAN ? I am trying to avoid purchasing a new DNS appliance for the new data center
and want to know what are the alternatives I have.

im not entirely sure by your setup, as normally you would use AD integrated zones for DNS in an AD environment - although there are other options as you have already setup.
the fact the zone is a secondary zone in DNS server terms doesn't mean you can't point your clients to it as their primary dns server. They will quite happily resolve names using a secondary server.
so as long as your dns devices are correctly setup to support the additional secondary zone I see no reason why you couldn't do this.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

LDAP Using Active Directory failed in BAM

I tried to configure the LDAP Using Active Directory as described in the BAM installation guide 10.1.3.1.0.
In appsetting, i gave the server name, username and password used by us. Then i restarted the active data cache and IIS. Then i tried to access the http:\\server\oraclebam. But it is throwing the following error. What shall i do.
Exception Message The directory service is unavailable
Stack Trace at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) at
System.DirectoryServices.DirectoryEntry.Bind() at System.DirectoryServices.DirectoryEntry.get_AdsObject() at
System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne) at
System.DirectoryServices.DirectorySearcher.FindOne() at
Oracle.BAM.Common.Security.Ldap.LdapAuthenticationTicket.Authenticate(String strName, String strPassword) at
Oracle.BAM.Common.Security.Authentication.LDAPAuthenticationModule.GetPrincipal(ICredentials oCredentials) at
Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate(ICredentials oCredentials) at
Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate() at Oracle.BAM.Web.WebPage.ProcessRequest(Page oPage, String
strAssembly, String strApp, String strType, String strMethod, String strParam)
Debugging Information The directory service is unavailable [ErrorSource="System.DirectoryServices"] Debugging information:
System.Runtime.InteropServices.COMException (0x8007200F): The directory service is unavailable at
System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) at System.DirectoryServices.DirectoryEntry.Bind() at
System.DirectoryServices.DirectoryEntry.get_AdsObject() at System.DirectoryServices.DirectorySearcher.FindAll(Boolean
findMoreThanOne) at System.DirectoryServices.DirectorySearcher.FindOne() at
Oracle.BAM.Common.Security.Ldap.LdapAuthenticationTicket.Authenticate(String strName, String strPassword) at
Oracle.BAM.Common.Security.Authentication.LDAPAuthenticationModule.GetPrincipal(ICredentials oCredentials) at
Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate(ICredentials oCredentials) at
Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate() at Oracle.BAM.Web.WebPage.ProcessRequest(Page oPage, String
strAssembly, String strApp, String strType, String strMethod, String strParam)

Hi,
We are also facing the issue stated in the first thread. We followed everything specified in the LDAP PDF under TechNotes and still not able to access the BAM console successfully.
The error we get is pasted at the end of this post. The request doesn't even seem to reach our LDAP server (configured in a remote system).
A couple of clarifications required:
1. Does our windows logon need to be the same as BAM console logon?
2. I do not know the LDAP setting for my actual windows logon. But i have retained my same usrId and have configured a user in LDAP with my own organization and other hierarchies. I have configured this userId with the complete hierarchy in BAM login management and have given admin access also to this user. Is this correct?
An error occurred while processing your request
Details...
Exception Message The server is not operational
Stack Trace at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) at System.DirectoryServices.DirectoryEntry.Bind() at System.DirectoryServices.DirectoryEntry.get_AdsObject() at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne) at System.DirectoryServices.DirectorySearcher.FindOne() at Oracle.BAM.Common.Security.Ldap.LdapAuthenticationTicket.Authenticate(String strName, String strPassword) at Oracle.BAM.Common.Security.Authentication.LDAPAuthenticationModule.GetPrincipal(ICredentials oCredentials) at Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate(ICredentials oCredentials) at Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate() at Oracle.BAM.Web.WebPage.ProcessRequest(Page oPage, String strAssembly, String strApp, String strType, String strMethod, String strParam) ...
Debugging Information The server is not operational [ErrorSource="System.DirectoryServices"] Debugging information: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) at System.DirectoryServices.DirectoryEntry.Bind() at System.DirectoryServices.DirectoryEntry.get_AdsObject() at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne) at System.DirectoryServices.DirectorySearcher.FindOne() at Oracle.BAM.Common.Security.Ldap.LdapAuthenticationTicket.Authenticate(String strName, String strPassword) at Oracle.BAM.Common.Security.Authentication.LDAPAuthenticationModule.GetPrincipal(ICredentials oCredentials) at Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate(ICredentials oCredentials) at Oracle.BAM.Web.Authentication.WebAuthentication.Authenticate() at Oracle.BAM.Web.WebPage.ProcessRequest(Page oPage, String strAssembly, String strApp, String strType, String strMethod, String strParam) ...
Assembly StartPage
State Oracle.BAM.StartPage.StartUp
Event Initialize
Thanks,
KM

Cisco ASA 8.3 ldap AAA server setup Microsoft active directory fails

Similar Messages

Maybe you are looking for