Cisco ASA - TLS support
Hi community
Does anybody know which version of TLS is supported on release 8.4?
Thank you all.
Regards
Jose
Well, saying 7.0 is supported and 8.0 is recommended is not contradictory, right? :)
If you do spot any real contradictions let me know (or use the "provide feedback" link on the page where you find it).
BTW the you sentence you quote is from the section "Apple IPsec and L2TP/IPsec Clients" so it does not apply to SSL/TLS. Having said that, I would personnaly recommend 8.0 or later indeed (for anything really ).
Herbert
Similar Messages
-
I Want Buy Cisco ASA Firewall Supporting SIP
Hello Guys I want to buy cisco ASA Firewall , that support SIP and Session Border Controller (SBC) So please can any one tell me the most power full that support this protocols ,, Than you guys
Hi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH, -
Does Cisco ASA support android ?
Dear all,
Does Cisco ASA 5505 support android ? for smartnet phone and other systerm use anddroid.?
Best Regards,
RechardRechard,
Just adding my two cents:
ASA and Native L2TP-IPSec Android Client Configuration Example
Android and L2TP/IPsec Clients
AnyConnect Mobile License
HTH.
Message was edited by: Javier Portuguez -
Dynamic Routing Protocol Support in Cisco ASA Multiple Context Mode
Dear Experts,
Wold like to know whether dynamic Routing Protocol Support in Cisco ASA Firewall Multiple Context Mode. If yes then please provide OS version and Hardware Model of Cisco ASA Firewall. Appreciate the quick response. Thanks.Hi,
Check out this document for the information
http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html#wp93116
Its lists the following for software level 9.0(1)
Multiple Context Mode Features
Dynamic routing in Security Contexts
EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
Seems to me you would need some 9.x version to support the above mentioned Dynamic Routing Protocols.
I don't think its related to the hardware model of the ASA other than that it requires a model that supports Multiple Context Mode. To my understanding the only model that doesnt support that is ASA5505 of the whole ASA5500 and ASA5500-X series.
Hope this helps
- Jouni -
Cisco ASA 5585-X SSP-20 SSL wildcard SSL certificate support ?
Hello
i want to verify if Cisco ASA 5585-X SSP-20 supports Wildcard SSL's.
CheersSupports them how?
As certificates issued to the ASA and properly bound to it's interfaces to support SSL VPN or ASDM access - yes.
You can configure a wildcard (or any other) certificate improperly and cause things not to work. However it's not a limitation of the device's operating system not supporting it. -
Cisco ASA - BGP or OSPF support on Multicontext Firewall?
Hello Forum,
I would like to know why is the limitation of Cisco ASA in multicontext mode that it is not able to run routing protocols like OSPF, BGP?
if I see SRX firewall, you can cut that virtually and can configure BGP, OSPF routing instances with virtual firewall.
is there any possibility in ASA product to run OSPF, BGP in multicontext mode?
comments are welcome...
Thanks
DaveTo answer your question, Cisco wants its customers (or at least used to want its customers) to use the ASA as a firewall and not a router. So you would have one device that is your firewall and one device that is your router. I suppose they started to realize that customers are looking for an all in one device, so they started adding routing features to the ASA, and firewall features to the routers, yet the firewall still doesn't have all the routing capabilities of a router and the router doesn't have all the firewalling capabilities of the ASA.
You can speculate that this is a marketing ploy so you are required to purchase more devices, or you could look at it in such a way that it is best practice to seperate all functionality in the instance that a device does get hacked.
Please remember to select a correct answer and rate -
Cisco ASA 5505 - 2 internal Networks
Hi new to ASA's,
Been trying to get the following setup working for ages but can't see what I am missing:
(Got image from another post but exactly what I want but cannot get working)
I can get ping between subnets but nothing else and Lan 2 cannot get to internet.
The reolution for this guy was the following I believe; (from his config he has ASA v8.2)
same-security-traffic permit intra-interface
access-list NONAT permit ip 192.168.50.0 255.255.255.0 10.0.50.0255.255.255.0
access-list NONAT permit ip 10.0.50.0 255.255.255.0 192.168.50.0 255.255.255.0
nat (inside) 0 access-list NONAT
I have tried this but I have ASA v8.4 and whilst commands 1 - 3 work command 4 doesn't.
I get a message about the command being deprecated. I couldn't find a new version I could understand.
Hope nothing stupid and simple but any help greatly appreciated.
BTW, I have reset my ASA back to defaults except internet access is working and internet LAN as I made some many changes I feared one my conflict with the other.
Many thanks for any views or help.Hi Jumora,
Thanks for the reply.
The 192 network behind the ASA can access the internet but the 10 network past the 1841 router can't.
I have setup tcp bypass already as that got me at least remote access to the PC's on the 10 network from the 192 network.
I had the 1841 router set to use the interface on the 192 subnet as the route to the 0.0.0.0 0.0.0.0 network but I couldn't get out but have just changed this to go to the inside interface of the ASA and can now ping 8.8.8.8 for example but still not internet access.
Also I have found that the ASA seems to occasionally when it feels like it block pings from the 10 subnet to devices in the 192 subnet...... annoying for testing! but I can still access shares even though the ping fails.
e.g. as per above yesterday it stopped when I enabled icmp error inspection but when I switched that off it worked again. Then suddenly again today with no changes it has stopped working again, drives me nuts the inconsistency!
I couldn't find an attach option for the show tech so it has made this post massive.... apologies for that....
ASA5505# show tech
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(9)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
ASA5505 up 8 days 23 hours
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Int: Internal-Data0/0 : address is 4403.a7a2.e7c7, irq 11
1: Ext: Ethernet0/0 : address is 4403.a7a2.e7bf, irq 255
2: Ext: Ethernet0/1 : address is 4403.a7a2.e7c0, irq 255
3: Ext: Ethernet0/2 : address is 4403.a7a2.e7c1, irq 255
4: Ext: Ethernet0/3 : address is 4403.a7a2.e7c2, irq 255
5: Ext: Ethernet0/4 : address is 4403.a7a2.e7c3, irq 255
6: Ext: Ethernet0/5 : address is 4403.a7a2.e7c4, irq 255
7: Ext: Ethernet0/6 : address is 4403.a7a2.e7c5, irq 255
8: Ext: Ethernet0/7 : address is 4403.a7a2.e7c6, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 50 perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 10 perpetual
Total VPN Peers : 12 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX3434343T
Running Permanent Activation Key: 0x8509ef7f 0x2cff5895 0xa4675895 0x7989798 0xc1323132
Configuration register is 0x1
Configuration last modified by enable_15 at 16:21:28.863 UTC Wed Oct 23 2013
------------------ show disk0: controller ------------------
Flash Model: SMART CF
------------------ show clock ------------------
04:43:59.822 UTC Thu Oct 24 2013
------------------ show crashinfo ------------------
No crash file found.
------------------ show module ------------------
Mod Card Type Model Serial No.
0 ASA 5505 Adaptive Security Appliance ASA5505 JMX3434343T
Mod MAC Address Range Hw Version Fw Version Sw Version
0 1255.a3a4.e3bf to 1233.a4a4.e4c4 0.1 1.0(12)13 8.4(4)1
Mod SSC Application Name Status SSC Application Version
Mod Status Data Plane Status Compatibility
0 Up Sys Not Applicable
------------------ show memory ------------------
Free memory: 283382600 bytes (53%)
Used memory: 253488312 bytes (47%)
Total memory: 536870912 bytes (100%)
------------------ show conn count ------------------
76 in use, 704 most used
------------------ show xlate count ------------------
80 in use, 814 most used
------------------ show vpn-sessiondb summary ------------------
No sessions to display.
------------------ show blocks ------------------
SIZE MAX LOW CNT
0 400 399 400
4 100 99 99
80 347 332 347
256 200 192 195
1550 6374 6306 6371
2048 1200 1199 1200
2560 264 264 264
4096 100 99 100
8192 100 99 100
16384 100 99 100
65536 16 15 16
CORE LIMIT ALLOC HIGH CNT FAILED
0 24576 26 26 25 0
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2832 bytes (default)
History analysis time limit: 100 msec
Please see 'show blocks exhaustion snapshot' for more information
------------------ show interface ------------------
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7bf, MTU not set
IP address unassigned
8257648 packets input, 9051289473 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
6222 switch ingress policy drops
6399241 packets output, 1011134108 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 3
Interface config status is active
Interface state is active
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c0, MTU not set
IP address unassigned
1330699 packets input, 312264395 bytes, 0 no buffer
Received 63097 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 switch ingress policy drops
1738131 packets output, 637935280 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 4
Interface config status is active
Interface state is active
Interface Ethernet0/2 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c1, MTU not set
IP address unassigned
5028958 packets input, 693527818 bytes, 0 no buffer
Received 28835 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
1 switch ingress policy drops
7782140 packets output, 8316018900 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 5
Interface config status is active
Interface state is active
Interface Ethernet0/3 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c2, MTU not set
IP address unassigned
17048409 packets input, 21350059442 bytes, 0 no buffer
Received 75081 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
18 switch ingress policy drops
8319277 packets output, 5138543287 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 6
Interface config status is active
Interface state is active
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c3, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 7
Interface config status is not active
Interface state is active
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c4, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 8
Interface config status is not active
Interface state is active
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex, Auto-Speed
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c5, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 9
Interface config status is not active
Interface state is active
Interface Ethernet0/7 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Input flow control is unsupported, output flow control is unsupported
Available but not configured via nameif
MAC address 4403.a7a2.e7c6, MTU not set
IP address unassigned
7293552 packets input, 4521902362 bytes, 0 no buffer
Received 6520 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
0 switch ingress policy drops
16232858 packets output, 21234947011 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 rate limit drops
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 10
Interface config status is active
Interface state is active
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps, DLY 10 usec
(Full-duplex), (1000 Mbps)
Input flow control is unsupported, output flow control is unsupported
MAC address 4403.a2a2.e2c2, MTU not set
IP address unassigned
15222257 packets input, 10134321711 bytes, 0 no buffer
Received 173531 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops, 0 demux drops
15128507 packets output, 10256870512 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (512/487)
output queue (blocks free curr/low): hardware (512/450)
Control Point Interface States:
Interface number is 2
Interface config status is active
Interface state is active
Interface Internal-Data0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 1000 Mbps, DLY 10 usec
(Full-duplex), (1000 Mbps)
Input flow control is unsupported, output flow control is unsupported
MAC address 0000.0003.0002, MTU not set
IP address unassigned
15128465 packets input, 10256855882 bytes, 0 no buffer
Received 1967 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 switch ingress policy drops
15222217 packets output, 10134318430 bytes, 0 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
0 switch egress policy drops
0 input reset drops, 0 output reset drops
Control Point Interface States:
Interface number is 11
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
MAC address 4403.a7a2.e7c7, MTU 1500
IP address 192.168.1.1, subnet mask 255.255.255.0
Traffic Statistics for "inside":
4183727 packets input, 523675346 bytes
5702790 packets output, 5851485425 bytes
142576 packets dropped
1 minute input rate 22 pkts/sec, 2839 bytes/sec
1 minute output rate 30 pkts/sec, 22751 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 33 pkts/sec, 3746 bytes/sec
5 minute output rate 46 pkts/sec, 20906 bytes/sec
5 minute drop rate, 1 pkts/sec
Control Point Interface States:
Interface number is 14
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
MAC address 4403.a7a2.e7c7, MTU 1492
IP address 98.22.77.33, subnet mask 255.255.255.255
Traffic Statistics for "outside":
10541983 packets input, 11433817622 bytes
3793777 packets output, 526586888 bytes
13654 packets dropped
1 minute input rate 47 pkts/sec, 41657 bytes/sec
1 minute output rate 18 pkts/sec, 2802 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 80 pkts/sec, 38519 bytes/sec
5 minute output rate 29 pkts/sec, 3749 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 15
Interface config status is active
Interface state is active
Interface Virtual0 "_internal_loopback", is up, line protocol is up
Hardware is Virtual MAC address 0000.0000.0000, MTU 1500
IP address 127.0.0.1, subnet mask 255.255.255.0
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 12
Interface config status is active
Interface state is active
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 8%; 5 minutes: 8%
------------------ show cpu hogging process ------------------
Process: Unicorn Admin Handler, PROC_PC_TOTAL: 1, MAXHOG: 23, LASTHOG: 23
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x0853e1f4 (suspend)
Process: Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 23, LASTHOG: 23
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x0853e1f4 (suspend)
Call stack: 0x0853e1f4 0x0853ec36 0x0854182c 0x0869cc4b 0x08415ae7 0x0840ae40 0x0806e6cf
0x08aade2b 0x0806e6cf 0x084a0a44 0x0849986d 0x08499aac 0x08499dd6 0x084a0909
Process: Unicorn Admin Handler, PROC_PC_TOTAL: 2, MAXHOG: 18, LASTHOG: 18
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x0853fb48 (suspend)
Process: Unicorn Admin Handler, NUMHOG: 2, MAXHOG: 18, LASTHOG: 18
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x0853fb48 (suspend)
Call stack: 0x0853fb48 0x0853fd1d 0x0853e1bc 0x0853ec36 0x0854182c 0x0869cc4b 0x08415ae7
0x0840ae40 0x0806e6cf 0x08aade2b 0x0806e6cf 0x084a0a44 0x0849986d 0x08499aac
Process: Unicorn Admin Handler, PROC_PC_TOTAL: 2, MAXHOG: 24, LASTHOG: 24
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x084167d2 (suspend)
Process: Unicorn Admin Handler, NUMHOG: 2, MAXHOG: 24, LASTHOG: 24
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x084167d2 (suspend)
Call stack: 0x08538afd 0x0853fa3a 0x0853fd1d 0x0853e1bc 0x0853ec36 0x0854182c 0x0869cc4b
0x08415ae7 0x0840ae40 0x0806e6cf 0x08aade2b 0x0806e6cf 0x084a0a44 0x0849986d
Process: Unicorn Admin Handler, PROC_PC_TOTAL: 1, MAXHOG: 12, LASTHOG: 12
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x08ee9b4e (suspend)
Process: Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 12, LASTHOG: 12
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x08ee9b4e (suspend)
Call stack: 0x08ee9e12 0x084a1032 0x0849986d 0x08499aac 0x08499dd6 0x084a0909 0x080689bc
Process: Dispatch Unit, PROC_PC_TOTAL: 2, MAXHOG: 12, LASTHOG: 12
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x081e208a (suspend)
Process: Dispatch Unit, NUMHOG: 2, MAXHOG: 12, LASTHOG: 12
LASTHOG At: 06:01:57 UTC Oct 15 2013
PC: 0x081e208a (suspend)
Call stack: 0x081e208a 0x080689bc
Process: Unicorn Admin Handler, NUMHOG: 1, MAXHOG: 180, LASTHOG: 180
LASTHOG At: 07:24:33 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a8c2 0x08a8ebd7 0x08a8f7c8 0x08a914fa 0x080ddd6f 0x080df9db 0x080f4132
0x080f5b16 0x080dd956 0x080de0ef 0x080de876 0x080dea37 0xdd6e6c1c 0xdd6e71b5
Process: rtcli async executor process, NUMHOG: 14, MAXHOG: 94, LASTHOG: 82
LASTHOG At: 07:28:06 UTC Oct 19 2013
PC: 0x08f262e3 (suspend)
Call stack: 0x0806a881 0x08f262e3 0x08f432a2 0x09064ba8 0x0903dfa9 0x0904f88d 0x0903ed70
0x09036221 0x0903d29b 0x0903d49f 0x09035ffa 0x09055321 0x0903dfa9 0x0904f88d
Process: rtcli async executor process, PROC_PC_TOTAL: 27, MAXHOG: 319, LASTHOG: 88
LASTHOG At: 07:28:06 UTC Oct 19 2013
PC: 0x08f4212d (suspend)
Process: rtcli async executor process, NUMHOG: 27, MAXHOG: 319, LASTHOG: 88
LASTHOG At: 07:28:06 UTC Oct 19 2013
PC: 0x08f4212d (suspend)
Call stack: 0x08069faa 0x08f4212d 0x08f260b6 0x08f27b85 0x08f27c35 0xcb147b98
Process: rtcli async executor process, PROC_PC_TOTAL: 12, MAXHOG: 45, LASTHOG: 10
LASTHOG At: 07:28:14 UTC Oct 19 2013
PC: 0x08f2594b (suspend)
Process: rtcli async executor process, NUMHOG: 12, MAXHOG: 45, LASTHOG: 10
LASTHOG At: 07:28:14 UTC Oct 19 2013
PC: 0x08f2594b (suspend)
Call stack: 0x0806a881 0x08f2594b 0x08f27b85 0x08f27c35 0xcb147b98
Process: Unicorn Admin Handler, NUMHOG: 4, MAXHOG: 11, LASTHOG: 11
LASTHOG At: 07:28:14 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a8c2 0x08a8ebd7 0x08b9aa46 0x08b9ad0e 0x080dc76f 0xdd6e6961 0xdd6e71b5
0xdd6e7b07 0xdd6e8d5c 0xdd6e138d 0xdd6e247a 0x080dcb22 0x0849f899 0x084981c7
Process: rtcli async executor process, PROC_PC_TOTAL: 83, MAXHOG: 298, LASTHOG: 119
LASTHOG At: 07:28:16 UTC Oct 19 2013
PC: 0x08f262e3 (suspend)
Process: rtcli async executor process, NUMHOG: 47, MAXHOG: 298, LASTHOG: 119
LASTHOG At: 07:28:16 UTC Oct 19 2013
PC: 0x08f262e3 (suspend)
Call stack: 0x0806a881 0x08f262e3 0x08f38fad 0x08f3acc0 0x0905a29e 0x0905b2ba 0x0903dfa9
0x0903ecb5 0x0904f6f5 0x0903ed70 0x09036221 0x0903d29b 0x0903d49f 0x09035ffa
Process: Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 180, LASTHOG: 180
LASTHOG At: 07:28:16 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a881 0x0806a8c2 0x0816261b 0x095302a7 0x0954abef 0x0954acc3 0x0815aabe
0x08134da6 0x08c64632 0x08ea8079 0x08ea8481 0x08ea85f7 0x08f41adc 0x0806e6cf
Process: Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 15, LASTHOG: 15
LASTHOG At: 07:28:20 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a881 0x0806a8c2 0x0947a399 0x0946d24d 0x0946d364 0x08c2b0e6 0x08c38f65
0x08ea810b 0x08ea8481 0x08ea85f7 0x08f41adc 0x0806e6cf 0x08f3cc48 0x092afca6
Process: Unicorn Admin Handler, NUMHOG: 3, MAXHOG: 64, LASTHOG: 64
LASTHOG At: 07:28:20 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a881 0x0806a8c2 0x0947a3e4 0x09479cf9 0x094750eb 0x08c3f645 0x08c3fcab
0x08c2b235 0x08c38f65 0x08ea810b 0x08ea8481 0x08ea85f7 0x08f41adc 0x0806e6cf
Process: IP Thread, NUMHOG: 4, MAXHOG: 14, LASTHOG: 14
LASTHOG At: 07:28:24 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a8c2 0x0947a399 0x0946d24d 0x0946d364 0x08c2b0e6 0x08c38f65 0x08ea810b
0x08ea8481 0x08ea85f7 0x08ea5f86 0x090e086e 0x090e0b6e 0x090b9a99 0x090b6b00
Process: Unicorn Admin Handler, PROC_PC_TOTAL: 22, MAXHOG: 180, LASTHOG: 64
LASTHOG At: 07:28:24 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Process: IP Thread, NUMHOG: 4, MAXHOG: 64, LASTHOG: 64
LASTHOG At: 07:28:24 UTC Oct 19 2013
PC: 0x0806a8c2 (suspend)
Call stack: 0x0806a8c2 0x0947a3e4 0x09479cf9 0x094750eb 0x08c3f645 0x08c3fcab 0x08c2b235
0x08c38f65 0x08ea810b 0x08ea8481 0x08ea85f7 0x08ea5f86 0x090e086e 0x090e0b6e
CPU hog threshold (msec): 10.240
Last cleared: None
------------------ show process ------------------
PC SP STATE Runtime SBASE Stack Process
Lwe 0x08058ba4 0xc82baf84 0x0a345788 0 0xc82b7078 15760/16384 block_diag
Mrd 0x081e1e11 0xc82ed54c 0x0a346144 430188 0xc82cd6e0 120548/131072 Dispatch Unit
Msi 0x087509a4 0xc82fdcb4 0x0a3458b0 713 0xc82f9da8 15688/16384 WebVPN KCD Process
Msi 0x09200c7b 0xc839b3d4 0x0a3458b0 3466 0xc83974c8 15688/16384 y88acs06 OneSec Thread
Mwe 0x080718dd 0xc83a3804 0x0a3458b0 0 0xc839f948 15808/16384 Reload Control Thread
Mwe 0x080849b9 0xc83ae79c 0x0a346e2c 0 0xc83aabe0 15256/16384 aaa
Mwe 0x08f4212d 0xc8d3d1e4 0x0a3458b0 9 0xc83aed78 15056/16384 UserFromCert Thread
Mwe 0x08f4212d 0xc9003fe4 0x0a3458b0 14 0xc83b2f50 14528/16384 aaa_shim_thread
Mwe 0x080b477c 0xc83bfa1c 0x0a347eb4 0 0xc83bbb20 15760/16384 CMGR Server Process
Mwe 0x080b6ded 0xc83c3b64 0x0a3458b0 0 0xc83bfcb8 15832/16384 CMGR Timer Process
Lwe 0x081e0474 0xc83d83bc 0x0a3568e0 0 0xc83d44b0 15488/16384 dbgtrace
Mwe 0x084de0ed 0xc83ef574 0x0a3458b0 0 0xc83e76d8 31680/32768 idfw_proc
Mwe 0x084ea35b 0xc83f75b4 0x0a3458b0 0 0xc83ef708 32216/32768 idfw_service
Mwe 0x084f5fc5 0xc83fb70c 0x0a3458b0 0 0xc83f78a0 15524/16384 idfw_adagent
Mwe 0x085351b5 0xc84038dc 0x0a3458b0 89 0xc83ffbd0 11568/16384 eswilp_svi_init
Mwe 0x08f4212d 0xc8770564 0x0a3458b0 0 0xc8433aa0 15280/16384 netfs_thread_init
Mwe 0x09576795 0xc844c10c 0x0a3458b0 0 0xc8448290 15848/16384 Chunk Manager
Msi 0x08ae10be 0xc84508ac 0x0a3458b0 3523 0xc844c9c0 15656/16384 PIX Garbage Collector
Mwe 0x08ac328a 0xc8461a0c 0x0a1d5d24 0 0xc845db00 16104/16384 IP Address Assign
Mwe 0x08d0477a 0xc85f7534 0x0a251838 0 0xc85f3628 16104/16384 QoS Support Module
Mwe 0x08b5c32a 0xc85fb70c 0x0a1d6c88 0 0xc85f7800 16104/16384 Client Update Task
Lwe 0x095d54f5 0xc860009c 0x0a3458b0 109750 0xc85fc1f0 14448/16384 Checkheaps
Mwe 0x08d093ed 0xc861080c 0x0a3458b0 454 0xc86089a0 19328/32768 Quack process
Mwe 0x08d8569d 0xc86189c4 0x0a3458b0 533 0xc8610b38 31952/32768 Session Manager
Mwe 0x08ed964d 0xc8620cd4 0xcadf5b08 8 0xc861ce68 15464/16384 uauth
Mwe 0x08e66621 0xc8624f0c 0x0a264a10 0 0xc8621000 15632/16384 Uauth_Proxy
Msp 0x08ea87de 0xc86313d4 0x0a3458b0 561 0xc862d4c8 15688/16384 SSL
Mwe 0x08ed72d4 0xc863554c 0x0a26bc14 0 0xc8631660 15708/16384 SMTP
Mwe 0x08ed170c 0xc86396a4 0x0a26af38 23255 0xc86357f8 13608/16384 Logger
Mwe 0x08ecfd1d 0xc863d80c 0x0a3458b0 0 0xc8639990 15784/16384 Syslog Retry Thread
Mwe 0x08ecadf5 0xc86419d4 0x0a3458b0 0 0xc863db28 15600/16384 Thread Logger
Mwe 0x08ed50b4 0xc866457c 0x0a26b5e0 0 0xc8660680 15464/16384 syslogd
Mwe 0x09132032 0xc8681094 0x0a2a5688 0 0xc867d1a8 15328/16384 vpnlb_thread
Mwe 0x092037ec 0xc86916c4 0x0a2aa9e8 0 0xc868d808 16024/16384 pci_nt_bridge
Mwe 0x082beb95 0xc8756e44 0x0a3458b0 0 0xc8752fb8 15864/16384 TLS Proxy Inspector
Msi 0x08da221c 0xc87d44a4 0x0a3458b0 2749 0xc87d0598 15688/16384 emweb/cifs_timer
Mwe 0x08852cc4 0xc88291f4 0x0a1c4c44 0 0xc88252f8 15712/16384 netfs_mount_handler
Msi 0x086b4248 0xc8316454 0x0a3458b0 27304 0xc8312568 15312/16384 arp_timer
Mwe 0x086bc58e 0xc8447fb4 0x0a371110 0 0xc84440f8 16024/16384 arp_forward_thread
Mwe 0x08eddb77 0xc8f2e27c 0x0a26c680 0 0xc8f2a380 15672/16384 tcp_fast
Mwe 0x08ee69a8 0xc8f3229c 0x0a26c680 0 0xc8f2e3b0 15656/16384 tcp_slow
Mwe 0x08f1df34 0xc8f42fac 0x0a2745d0 0 0xc8f3f0b0 16000/16384 udp_timer
Mwe 0x0814110d 0xc8fb133c 0xc83ca8d0 4 0xc8fad4a0 15664/16384 IPsec message handler
Mwe 0x087515c6 0xc8fdc834 0x0a376060 1 0xc8fd8958 16056/16384 Lic TMR
Mwe 0x087513bc 0xc8fe0884 0x0a1c0ea0 242 0xc8fdc988 16088/16384 Lic HA
Msi 0x08153267 0xc84270dc 0x0a3458b0 54986 0xc8423440 13872/16384 CTM message handler
Mwe 0x0811bd2d 0xc843bb8c 0x0a3458b0 0 0xc8437ce0 15832/16384 CTCP Timer process
Mwe 0x090d3d95 0xc843fbac 0x0a3458b0 0 0xc843bd10 15816/16384 L2TP data daemon
Mwe 0x090d6605 0xc9b5b24c 0x0a3458b0 0 0xc9b573b0 15816/16384 L2TP mgmt daemon
Mwe 0x090c2b27 0xc9b9339c 0x0a29a3ec 2228 0xc9b8f4e0 15480/16384 ppp_timer_thread
Msi 0x0913239d 0xc9b973ec 0x0a3458b0 4093 0xc9b93510 15640/16384 vpnlb_timer_thread
Mwe 0x081c7708 0xc9c67c84 0x0a13ef88 2899 0xc9c47f18 118548/131072 tmatch compile thread
Mwe 0x08d38b2d 0xcac940cc 0x0a3458b0 0 0xcac90210 15848/16384 ICMP event handler
Mwe 0x0908081d 0xcac98254 0x0a3458b0 0 0xcac943a8 15832/16384 Dynamic Filter VC Housekeeper
Mwe 0x08a1b612 0xcacc47f4 0x0a3458b0 819 0xcacc0938 13860/16384 IP Background
Mwe 0x08c26e63 0xcaed904c 0x0a3458b0 0 0xcaed51a0 15832/16384 Crypto CA
Mwe 0x08c60c18 0xcaedd1e4 0x0a3458b0 0 0xcaed9338 15896/16384 CERT API
Mwe 0x08c257d5 0xcaee6e24 0x0a3458b0 0 0xcaee2f58 15928/16384 Crypto PKI RECV
Mwe 0x0878dd85 0xc862d1cc 0x0a3458b0 187 0xc8629330 15272/16384 ESW_MRVL switch interrupt service
Mwe 0x08cae62c 0xc866c89c 0x0a1ea7e0 0 0xc86689b0 15832/16384 lina_int
Mrd 0x0959948b 0xc8684f1c 0x0a346144 28493079 0xc8681340 13824/16384 esw_stats
Lsi 0x08af3199 0xc86958bc 0x0a3458b0 152 0xc86919a0 15704/16384 uauth_urlb clean
Lwe 0x08acbd76 0xc83ff8b4 0x0a3458b0 4432 0xc83fba38 14308/16384 pm_timer_thread
Mwe 0x08555f8d 0xc8418b0c 0x0a3458b0 0 0xc8414c60 15832/16384 IKE Common thread
Mwe 0x0858cecd 0xcaf8688c 0x0a3458b0 0 0xcaf82a60 15704/16384 IKE Timekeeper
Mwe 0x0857bad1 0xcaf8ccc4 0x0a1bc678 1 0xcaf890e8 12116/16384 IKE Daemon
Mwe 0x08629eb3 0xcaf90c64 0x0a3458b0 964 0xcaf8d118 14744/16384 IKEv2 Daemon
Mwe 0x08628e7c 0xcaf94ff4 0x0a3458b0 1095 0xcaf91148 15640/16384 IKEv2 DPD Client Process
Mwe 0x08e7d2e4 0xcafafd7c 0x0a2690f4 0 0xcafabe90 16072/16384 RADIUS Proxy Event Daemon
Mwe 0x08e41f35 0xcafb3d74 0xcb07e358 7 0xcafb0028 14912/16384 RADIUS Proxy Listener
Mwe 0x08e7ca0d 0xcafb806c 0x0a3458b0 0 0xcafb41c0 15832/16384 RADIUS Proxy Time Keeper
Mwe 0x086a1e44 0xcafbc184 0x0a3710c8 0 0xcafb8358 15264/16384 Integrity FW Task
Mrd 0x082c923a 0xcaffce54 0x0a346144 0 0xcaff8f98 14552/16384 CP Threat-Detection Processing
Mwe 0x081fb74e 0xcb0cc4bc 0x09c4a8bc 2497 0xcb0acd60 122448/131072 ci/console
Msi 0x08b0ea8c 0xcb0d0e14 0x0a3458b0 217583 0xcb0ccef8 14004/16384 update_cpu_usage
Mwe 0x08ef5ff5 0xcb0d4ecc 0x0a3458b0 77 0xcb0d1090 15360/16384 npshim_thread
Msi 0x08b0eb14 0xcb0e1224 0x0a3458b0 0 0xcb0dd428 13104/16384 NIC status poll
Mwe 0x08dd5f2c 0xcb0e54bc 0x0a259ec8 228 0xcb0e15c0 15540/16384 SNMP Notify Thread
Mwe 0x086aba0e 0xcb12ebe4 0x0a37170c 235813 0xcb126d08 25428/32768 IP Thread
Mwe 0x086b31fe 0xcb132d9c 0x0a371100 9150 0xcb12eea0 9700/16384 ARP Thread
Mwe 0x084be3ae 0xcb136f8c 0x0a3716c8 1743 0xcb1331b0 12696/16384 icmp_thread
Mwe 0x08f1f443 0xcb13b1e4 0x0a3458b0 158 0xcb137348 15728/16384 udp_thread
Mwe 0x08ee0f44 0xcb13f0bc 0x0a37178c 0 0xcb13b4e0 15288/16384 tcp_thread
Mwe 0x08f4212d 0xcb1bccd4 0x0a3458b0 12848 0xcb13fd70 26600/32768 rtcli async executor process
Mwe 0x090e408d 0xcb4dff64 0x0a3458b0 0 0xcb4dc0a8 14608/16384 PPPOE background daemon
Mwe 0x090e53c4 0xcb4e3fb4 0x0a29aa4c 1 0xcb4e00d8 14656/16384 PPPOE CLI daemon
Mwe 0x0824ff45 0xcb501e4c 0x0a3458b0 258 0xcb4fdf90 15624/16384 Timekeeper
Mwe 0x08e41f35 0xcb89a6d4 0xcb89eb10 7 0xcb896998 15392/16384 EAPoUDP-sock
Mwe 0x0822323d 0xcb89e544 0x0a3458b0 0 0xcb89a9c8 15016/16384 EAPoUDP
Mwe 0x08204371 0xcb3df9dc 0x0a3458b0 149 0xcb3dbb20 15168/16384 DHCPD Timer
Mwe 0x082066a1 0xcb3e6404 0x0a3458b0 1286 0xcb3e25a8 7172/16384 dhcp_daemon
Mwe 0x0910dfd4 0xcbc3b4e4 0x0a2a5380 0 0xcbc335e8 32472/32768 vpnfol_thread_msg
Msi 0x09116252 0xcbc3fac4 0x0a3458b0 2657 0xcbc3bbd8 15656/16384 vpnfol_thread_timer
Mwe 0x09114882 0xcbc44074 0x0a2a53c0 0 0xcbc401c8 16008/16384 vpnfol_thread_sync
Msi 0x09115fdc 0xcbc486b4 0x0a3458b0 11061 0xcbc447b8 15672/16384 vpnfol_thread_unsent
Mwe 0x0869e365 0xc8689384 0x0a3458b0 0 0xc86854d8 15832/16384 Integrity Fw Timer Thread
Msi 0x08852fd6 0xc868d55c 0x0a3458b0 206 0xc8689670 15656/16384 netfs_vnode_reclaim
Mwe 0x08f4212d 0xcb2a1914 0x0a3458b0 1277 0xcbd38510 15008/16384 Unicorn Proxy Thread
Mwe 0x0825afcb 0xcbc61254 0x0a3458b0 335 0xcbc5d788 14272/16384 emweb/https
Mwe 0x08eef828 0xcbd4dd0c 0xcbd4fd7c 0 0xcbd49fd0 14888/16384 listen/telnet
Mwe 0x08aac530 0xcbdbd754 0xcbd6c9fc 102 0xcbd9def8 127432/131072 Unicorn Admin Handler
Mwe 0x08aab345 0xcbddd644 0x0a3458b0 105 0xcbdbdf28 123712/131072 Unicorn Admin Handler
Mwe 0x08cd7c6f 0xcaf358cc 0x0a49edc8 0 0xcaf31bb0 15384/16384 qos_metric_daemon
Mwe 0x08218c82 0xcb2693fc 0x0a3458b0 3 0xcb265560 13248/16384 DHCP Client
Mwe 0x08f1d929 0xcb4bb0fc 0xc8f3ece4 0 0xcb4b3300 31552/32768 DHCPC Receiver
M* 0x08a86f55 0xdcc1df2c 0x0a346144 274 0xcb34deb8 19696/32768 telnet/ci
- - - - 0 - - DATAPATH-0-455
- - - - 744377118 - - scheduler
- - - - 774156778 - - total elapsed
------------------ show kernel process ------------------
PID PPID PRI NI VSIZE RSS WCHAN STAT RUNTIME COMMAND
1 0 20 0 2080768 616 3725686580 S 630 init
2 0 15 -5 0 0 3725738556 S 0 kthreadd
3 2 15 -5 0 0 3725692956 S 0 ksoftirqd/0
4 2 15 -5 0 0 3725728656 S 0 events/0
5 2 15 -5 0 0 3725728656 S 0 khelper
50 2 15 -5 0 0 3725728656 S 0 kblockd/0
53 2 15 -5 0 0 3726777703 S 0 kseriod
99 2 20 0 0 0 3725848262 S 0 pdflush
100 2 20 0 0 0 3725848262 S 0 pdflush
101 2 15 -5 0 0 3725861131 S 0 kswapd0
102 2 15 -5 0 0 3725728656 S 0 aio/0
103 2 15 -5 0 0 3725728656 S 0 nfsiod
214 2 15 -5 0 0 3725728656 S 0 hid_compat
215 2 15 -5 0 0 3725728656 S 0 rpciod/0
240 1 16 -4 1789952 600 3725997327 S 4 udevd
272 240 18 -2 1785856 564 3725997327 S 0 udevd
277 240 18 -2 1785856 552 3725997327 S 0 udevd
421 1 20 0 5201920 1600 4294967295 S 11 lwsmd
423 421 20 0 16736256 3600 4294967295 S 102 lwregd
448 1 20 0 2084864 512 3725686580 S 1 sh
449 448 20 0 10186752 528 4294967295 S 2 lina_monitor
451 449 0 -20 440270848 53000 4294967295 S 77713055 lina
------------------ show kernel cgroup-controller detail ------------------
memory controller:
memory.limit_in_bytes: unlimited
memory.usage_in_bytes: 61665280 (11%)
memory.max_usage_in_bytes: 64245760 (12%)
memory.failcnt: 0
tasks:
group "normal"
memory.limit_in_bytes: unlimited
memory.usage_in_bytes: 77824 (0%)
memory.max_usage_in_bytes: 544768 (0%)
memory.failcnt: 0
tasks:
PID RSS COMMAND
1 630784 init
2 0 kthreadd
3 0 ksoftirqd/0
4 0 events/0
5 0 khelper
50 0 kblockd/0
53 0 kseriod
99 0 pdflush
100 0 pdflush
101 0 kswapd0
102 0 aio/0
103 0 nfsiod
214 0 hid_compat
215 0 rpciod/0
240 614400 udevd
272 577536 udevd
277 565248 udevd
448 524288 sh
group "privileged"
memory.limit_in_bytes: unlimited
memory.usage_in_bytes: 22327296 (4%)
memory.max_usage_in_bytes: 22515712 (4%)
memory.failcnt: 0
tasks:
PID RSS COMMAND
449 540672 lina_monitor
450 0 lina_monitor
451 54280192 lina
452 0 lina
453 0 lina
454 0 lina
455 0 lina
group "restricted"
memory.limit_in_bytes: 23068672 (4%)
memory.usage_in_bytes: 1724416 (0%)
memory.max_usage_in_bytes: 1900544 (0%)
memory.failcnt: 0
tasks:
PID RSS COMMAND
421 1638400 lwsmd
422 0 lwsmd
423 3686400 lwregd
425 0 lwregd
426 0 lwregd
427 0 lwregd
428 0 lwregd
429 0 lwregd
430 0 lwsmd
431 0 lwsmd
432 0 lwsmd
433 0 lwsmd
434 0 lwsmd
cpu controller:
cpu.shares: 1024
cpuacct.usage: 777015353084076
tasks:
group "normal"
cpu.shares: 1024
cpuacct.usage: 53525955783 (0%)
tasks:
PID RSS COMMAND
1 630784 init
2 0 kthreadd
3 0 ksoftirqd/0
4 0 events/0
5 0 khelper
50 0 kblockd/0
53 0 kseriod
99 0 pdflush
100 0 pdflush
101 0 kswapd0
102 0 aio/0
103 0 nfsiod
214 0 hid_compat
215 0 rpciod/0
240 614400 udevd
272 577536 udevd
277 565248 udevd
448 524288 sh
449 540672 lina_monitor
450 0 lina_monitor
451 54280192 lina
452 0 lina
453 0 lina
454 0 lina
group "privileged"
cpu.shares: 16384
cpuacct.usage: 776952528547140 (100%)
tasks:
PID RSS COMMAND
455 0 lina
group "restricted"
cpu.shares: 1024
cpuacct.usage: 1291957168 (0%)
tasks:
PID RSS COMMAND
421 1638400 lwsmd
422 0 lwsmd
423 3686400 lwregd
425 0 lwregd
426 0 lwregd
427 0 lwregd
428 0 lwregd
429 0 lwregd
430 0 lwsmd
431 0 lwsmd
432 0 lwsmd
433 0 lwsmd
434 0 lwsmd
------------------ show traffic ------------------
inside:
received (in 422169.300 secs):
4183910 packets 523687951 bytes
9 pkts/sec 1006 bytes/sec
transmitted (in 422169.300 secs):
5702974 packets 5851550584 bytes
3 pkts/sec 13006 bytes/sec
1 minute input rate 22 pkts/sec, 2839 bytes/sec
1 minute output rate 30 pkts/sec, 22751 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 33 pkts/sec, 3746 bytes/sec
5 minute output rate 46 pkts/sec, 20906 bytes/sec
5 minute drop rate, 1 pkts/sec
outside:
received (in 422169.300 secs):
10542135 packets 11433861540 bytes
4 pkts/sec 27002 bytes/sec
transmitted (in 422169.300 secs):
3793870 packets 526596330 bytes
8 pkts/sec 1003 bytes/sec
1 minute input rate 47 pkts/sec, 41657 bytes/sec
1 minute output rate 18 pkts/sec, 2802 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 80 pkts/sec, 38519 bytes/sec
5 minute output rate 29 pkts/sec, 3749 bytes/sec
5 minute drop rate, 0 pkts/sec
_internal_loopback:
received (in 422168.950 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
transmitted (in 422168.950 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
Ethernet0/0:
received (in 776992.730 secs):
8257731 packets 9051312645 bytes
5 pkts/sec 11002 bytes/sec
transmitted (in 776992.730 secs):
6399342 packets 1011145708 bytes
2 pkts/sec 1002 bytes/sec
1 minute input rate 26 pkts/sec, 24481 bytes/sec
1 minute output rate 20 pkts/sec, 3472 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 40 pkts/sec, 20147 bytes/sec
5 minute output rate 29 pkts/sec, 4280 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 776992.730 secs):
1330771 packets 312271947 bytes
1 pkts/sec 3 bytes/sec
transmitted (in 776992.730 secs):
1738316 packets 638003030 bytes
2 pkts/sec 3 bytes/sec
1 minute input rate 4 pkts/sec, 405 bytes/sec
1 minute output rate 11 pkts/sec, 3333 bytes/sec
<--- More --->
1 minute drop rate, 0 pkts/sec
5 minute input rate 7 pkts/sec, 735 bytes/sec
5 minute output rate 13 pkts/sec, 4410 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 776993.220 secs):
5028958 packets 693527818 bytes
0 pkts/sec 2 bytes/sec
transmitted (in 776993.220 secs):
7782202 packets 8316039741 bytes
4 pkts/sec 10000 bytes/sec
1 minute input rate 1 pkts/sec, 153 bytes/sec
1 minute output rate 2 pkts/sec, 391 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 1 pkts/sec, 187 bytes/sec
5 minute output rate 3 pkts/sec, 1011 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 776993.220 secs):
17219822 packets 21609826615 bytes
0 pkts/sec 27005 bytes/sec
transmitted (in 776993.220 secs):
8373382 packets 5142266559 bytes
5 pkts/sec 6004 bytes/sec
<--- More --->
1 minute input rate 8384 pkts/sec, 12695156 bytes/sec
1 minute output rate 2657 pkts/sec, 203156 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 8010 pkts/sec, 12112337 bytes/sec
5 minute output rate 2525 pkts/sec, 188122 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 776993.680 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
transmitted (in 776993.680 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 776993.690 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
transmitted (in 776993.690 secs):
<--- More --->
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 776994.140 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
transmitted (in 776994.140 secs):
0 packets 0 bytes
0 pkts/sec 0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 776994.140 secs):
7328915 packets 4524298170 bytes
<--- More --->
3 pkts/sec 5004 bytes/sec
transmitted (in 776994.140 secs):
16345245 packets 21405489647 bytes
4 pkts/sec 27001 bytes/sec
1 minute input rate 2330 pkts/sec, 158045 bytes/sec
1 minute output rate 7422 pkts/sec, 11264540 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 2481 pkts/sec, 168427 bytes/sec
5 minute output rate 7977 pkts/sec, 12105867 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 776994.640 secs):
15222548 packets 10134365294 bytes
3 pkts/sec 13004 bytes/sec
transmitted (in 776994.640 secs):
15128813 packets 10256961010 bytes
2 pkts/sec 13001 bytes/sec
1 minute input rate 45 pkts/sec, 24860 bytes/sec
1 minute output rate 49 pkts/sec, 26647 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 73 pkts/sec, 24918 bytes/sec
5 minute output rate 75 pkts/sec, 26334 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
<--- More --->
received (in 776994.640 secs):
15128721 packets 10256943282 bytes
2 pkts/sec 13001 bytes/sec
transmitted (in 776994.640 secs):
15222455 packets 10134357062 bytes
3 pkts/sec 13004 bytes/sec
1 minute input rate 48 pkts/sec, 26530 bytes/sec
1 minute output rate 45 pkts/sec, 24826 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 75 pkts/sec, 26323 bytes/sec
5 minute output rate 73 pkts/sec, 24908 bytes/sec
5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 0/s 0/s
TCP Conns 0/s 0/s
UDP Conns 0/s 0/s
URL Access 0/s 0/s
URL Server Req -
High CPU due to dispatch unit in cisco ASA 5540
Hi Any suggestion help
High CPU due to dispatch unit in cisco ASA 5540
ciscoasa# sh processes cpu-usage
PC Thread 5Sec 1Min 5Min Process
0805520c ad5afdf8 0.0% 0.0% 0.0% block_diag
081a8d34 ad5afa08 82.6% 82.1% 82.3% Dispatch Unit
083b6c05 ad5af618 0.0% 0.0% 0.0% CF OIR
08a60aa0 ad5af420 0.0% 0.0% 0.0% lina_int
08069f06 ad5aee38 0.0% 0.0% 0.0% Reload Control Thread
08072196 ad5aec40 0.0% 0.0% 0.0% aaa
08c76f3d ad5aea48 0.0% 0.0% 0.0% UserFromCert Thread
080a6f36 ad5ae658 0.0% 0.0% 0.0% CMGR Server Process
080a7445 ad5ae460 0.0% 0.0% 0.0% CMGR Timer Process
081a815c ad5ada88 0.0% 0.0% 0.0% dbgtrace
0844d75c ad5ad2a8 0.0% 0.0% 0.0% 557mcfix
0844d57e ad5ad0b0 0.0% 0.0% 0.0% 557statspoll
08c76f3d ad5abef8 0.0% 0.0% 0.0% netfs_thread_init
09319755 ad5ab520 0.0% 0.0% 0.0% Chunk Manager
088e3f0e ad5ab328 0.0% 0.0% 0.0% PIX Garbage Collector
088d72d4 ad5ab130 0.0% 0.0% 0.0% IP Address Assign
08ab1cd6 ad5aaf38 0.0% 0.0% 0.0% QoS Support Module
08953cbf ad5aad40 0.0% 0.0% 0.0% Client Update Task
093698fa ad5aab48 0.0% 0.0% 0.0% Checkheaps
08ab6205 ad5aa560 0.0% 0.0% 0.0% Quack process
08b0dd52 ad5aa368 0.0% 0.0% 0.0% Session Manager
08c227d5 ad5a9f78 0.0% 0.0% 0.0% uauth
08bbf615 ad5a9d80 0.0% 0.0% 0.0% Uauth_Proxy
08bf5cbe ad5a9798 0.0% 0.0% 0.0% SSL
08c20766 ad5a95a0 0.0% 0.0% 0.0% SMTP
081c0b4a ad5a93a8 0.0% 0.0% 0.0% Logger
08c19908 ad5a91b0 0.0% 0.0% 0.0% Syslog Retry Thread
08c1346e ad5a8fb8 0.0% 0.0% 0.0% Thread Logger
08e47c82 ad5a81f0 0.0% 0.0% 0.0% vpnlb_thread
08f0f055 ad5a7a10 0.0% 0.0% 0.0% pci_nt_bridge
0827a43d ad5a7620 0.0% 0.0% 0.0% TLS Proxy Inspector
08b279f3 ad5a7428 0.0% 0.0% 0.0% emweb/cifs_timer
086a0217 ad5a7230 0.0% 0.0% 0.0% netfs_mount_handler
08535408 ad5a7038 0.0% 0.0% 0.0% arp_timer
0853d18c ad5a6e40 0.0% 0.0% 0.0% arp_forward_thread
085ad295 ad5a6c48 0.0% 0.0% 0.0% Lic TMR
08c257b1 ad5a6a50 0.0% 0.0% 0.0% tcp_fast
08c28910 ad5a6858 0.0% 0.0% 0.0% tcp_slow
08c53f79 ad5a6660 0.0% 0.0% 0.0% udp_timer
080fe008 ad5a6468 0.0% 0.0% 0.0% CTCP Timer process
08df6853 ad5a6270 0.0% 0.0% 0.0% L2TP data daemon
08df7623 ad5a6078 0.0% 0.0% 0.0% L2TP mgmt daemon
08de39b8 ad5a5e80 0.0% 0.0% 0.0% ppp_timer_thread
08e48157 ad5a5c88 0.0% 0.0% 0.0% vpnlb_timer_thread
081153ff ad5a5a90 0.0% 0.0% 0.0% IPsec message handler
081296cc ad5a5898 0.0% 0.0% 0.0% CTM message handler
089b2bd9 ad5a56a0 0.0% 0.0% 0.0% NAT security-level reconfiguration
08ae1ba8 ad5a54a8 0.0% 0.0% 0.0% ICMP event handler
I want exact troubleshooting.
(1) Steps to follow.
(2) Required configuration
(3) Any good suggestions
(4) Any Tool to troubleshoot.
Suggestions are welcomeHello,
NMS is probably not the right community to t/s this. You probably want to move this to Security group (Security > Firewalling).
In the meanwhile, i have some details to share for you to check, though i am not a security/ASA expert.
The Dispatch Unit is a process that continually runs on single-core ASAs (models 5505, 5510, 5520, 5540, 5550). The Dispatch Unit takes packets off of the interface driver and passes them to the ASA SoftNP for further processing; it also performs the reverse process.
To determine if the Dispatch Unit process is utilizing the majority of the CPU time, use the command show cpu usage and show process cpu-usage sorted non-zero
show cpu usage (and show cpu usage detail) will show the usage of the ASA CPU cores:
ASA# show cpu usage
CPU utilization for 5 seconds = 0%; 1 minute: 1%; 5 minutes: 0%
show process cpu-usage sorted non-zero will display a sorted list of processes that are using the CPU usage.
In the example below, the Dispatch Unit process has used 50 percent of the CPU for the last 5 seconds:
ASA# show process cpu-usage sorted non-zero
0x0827e731 0xc85c5bf4 50.5% 50.4% 50.3% Dispatch Unit
0x0888d0dc 0xc85b76b4 2.3% 5.3% 5.5% esw_stats
0x090b0155 0xc859ae40 1.5% 0.4% 0.1% ssh
0x0878d2de 0xc85b22c8 0.1% 0.1% 0.1% ARP Thread
0x088c8ad5 0xc85b1268 0.1% 0.1% 0.1% MFIB
0x08cdd5cc 0xc85b4fd0 0.1% 0.1% 0.1% update_cpu_usage
If Dispatch Unit is listed as a top consumer of CPU usage, then use this document to narrow down what might be causing the Dispatch Unit process to be so active.
Most cases of high CPU utilization occur because the Dispatch Unit process is high. Common causes of high utilization include:
Oversubscription
Routing loops
Host with a high number of connections
Excessive system logs
Unequal traffic distribution
More t/s details can be shared by the ASA members from the community.
HTH
-Thanks
Vinod -
Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network
I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
ThanksI have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0 : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0 : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1 : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2 : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3 : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4 : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5 : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6 : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7 : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory: 199837144 bytes (74%)
Used memory: 68598312 bytes (26%)
Total memory: 268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE MAX LOW CNT
0 100 68 100
<--- More --->
4 300 299 299
80 100 92 100
256 100 94 100
1550 6174 6166 6174
2048 1124 551 612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
1 minute input rate 320 pkts/sec, 35404 bytes/sec
1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
1 minute drop rate, 17 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
1 minute input rate 328 pkts/sec, 313770 bytes/sec
1 minute output rate 301 pkts/sec, 32459 bytes/sec
1 minute drop rate, 2 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process: Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At: 04:45:59 UTC Nov 26 2013
PC: 8be0f7
Traceback: 8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
PC SP STATE Runtime SBASE Stack Process
Mwe 00c9bb24 01bb8700 013e3250 0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0 0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0 314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250 229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250 0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258 0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8 0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250 0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360 0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250 157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250 0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250 230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250 12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430 0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10 0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530 0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250 123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250 623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250 22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478 4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010 0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770 0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710 0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250 0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520 0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250 190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250 25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50 20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0 0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0 0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0 0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250 0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250 0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250 0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10 43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250 264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8 1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250 2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250 0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250 387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0 31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250 0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250 0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250 8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250 3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250 3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250 197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250 0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0 0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680 0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0 0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250 0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980 0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0 3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250 2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250 1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10 1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0 3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0 0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250 0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00 0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18 0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250 0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250 0 01b25c30 7968/8192 Integrity Fw Timer Thread
- - - - 47686621 - - scheduler
- - - - 51253819 - - total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
1 minute input rate 412 pkts/sec, 51803 bytes/sec
1 minute output rate 475 pkts/sec, 522952 bytes/sec
1 minute drop rate, 24 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
1 minute input rate 479 pkts/sec, 523680 bytes/sec
1 minute output rate 387 pkts/sec, 46796 bytes/sec
1 minute drop rate, 3 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
1 minute input rate 485 pkts/sec, 537048 bytes/sec
1 minute output rate 395 pkts/sec, 54546 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 485 pkts/sec, 511723 bytes/sec
5 minute output rate 387 pkts/sec, 65495 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
1 minute input rate 419 pkts/sec, 59621 bytes/sec
1 minute output rate 480 pkts/sec, 533950 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
5 minute output rate 482 pkts/sec, 511073 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
1 minute input rate 891 pkts/sec, 595715 bytes/sec
1 minute output rate 863 pkts/sec, 588935 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 885 pkts/sec, 584035 bytes/sec
5 minute output rate 870 pkts/sec, 580393 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
1 minute input rate 855 pkts/sec, 575808 bytes/sec
1 minute output rate 884 pkts/sec, 582339 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 869 pkts/sec, 578350 bytes/sec
5 minute output rate 883 pkts/sec, 581924 bytes/sec
5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 17/s 6/s
TCP Conns 8/s 2/s
UDP Conns 7/s 2/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept 0/s 0/s
HTTP Fixup 0/s 0/s
<--- More --->
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
------------------ show counters ------------------
Protocol Counter Value Context
IP IN_PKTS 168960 Summary
IP OUT_PKTS 169304 Summary
IP TO_ARP 61 Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs : 3, DMZ Restricted
Message #38 : Inside Hosts : Unlimited
Message #39 : Failover : Disabled
Message #40 : VPN-DES : Enabled
Message #41 : VPN-3DES-AES : Enabled
Message #42 : VPN Peers : 10
Message #43 : WebVPN Peers : 2
Message #44 : Dual ISPs : Disabled
Message #45 : VLAN Trunk Ports : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 : Boot microcode : CNlite-MC-Boot-Cisco-1.2
Message #50 : SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 : IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 : --------------------------------------------------------------------------
Message #53 : . .
Message #54 : | |
Message #55 : ||| |||
Message #56 : .|| ||. .|| ||.
Message #57 : .:||| | |||:..:||| | |||:.
Message #58 : C i s c o S y s t e m s
Message #59 : --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 : ****************************** Warning *******************************
Message #63 : This product contains cryptographic features and is
Message #64 : subject to United States and local country laws
Message #65 : governing, import, export, transfer, and use.
Message #66 : Delivery of Cisco cryptographic products does not
Message #67 : imply third-party authority to import, export,
Message #68 : distribute, or use encryption. Importers, exporters,
Message #69 : distributors and users are responsible for compliance
Message #70 : with U.S. and local country laws. By using this
Message #71 : product you agree to comply with applicable laws and
Message #72 : regulations. If you are unable to comply with U.S.
Message #73 : and local laws, return the enclosed items immediately.
Message #74 :
Message #75 : A summary of U.S. laws governing Cisco cryptographic
Message #76 : products may be found at:
Message #77 : http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 : If you require further assistance please contact us by
Message #80 : sending email to [email protected].
Message #81 : ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 : Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 : Cisco Systems, Inc.
Message #92 : 170 West Tasman Drive
Message #93 : San Jose, California 95134-1706
ciscoasa# -
Setting up site to site vpn with cisco asa 5505
I have a cisco asa 5505 that needs to be set up for site to site vpn to a cisco asa 5500. The 5505 is the remote office and the 5500 is the main office.
IP of remote office router is 71.37.178.142
IP of the main office firewall is 209.117.141.82
Can someone tell me if my config is correct, this is the first time I am setting this up and it can not be tested until I set it up at the remote office. I would rather know its correct before I go.
ciscoasa# show run
: Saved
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password TMACBloMlcBsq1kp encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 host 209.117.141.82
access-list inside_nat0_outbound extended permit ip host 71.37.178.142 host 209.117.141.82
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group5
crypto map outside_map 1 set peer 209.117.141.82
crypto map outside_map 1 set transform-set ESP-AES-256-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn username [email protected] password ********* store-local
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.129 inside
dhcpd enable inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:7e338fb2bf32a9ceb89560b314a5ef6c
: end
ciscoasa#
Thanks!Hi Mandy,
By using following access list define Peer IP as source and destination
access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
you are not defining the interesting traffic / subnets from both ends.
Make some number ACL 101 as you do not have to write the extended keyword then if you like as follows, or else NAME aCL will also work:
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 remark CCP_ACL Category=4 access-list 101 remark IPSEC Rule
!.1..source subnet(called local encryption domain) at your end 192.168.200.0
!..2.and destination subnet(called remote encryption domain)at other end 192.168.100.0 !.3..I mean you have to define what subnets you need to communicate between which are behind these firewalls
!..4...Local Subnets behind IP of the main office firewall is 209.117.141.82 say
!...at your end 192.168.200.0
!..5.Remote Subnets behind IP of remote office router is 71.37.178.142 say
!...at other end 192.168.100.0
Please use Baisc Steps as follows:
A. Configuration in your MAIN office having IP = 209.117.141.82 (follow step 1 to 6)
Step 1.
Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
Step 2.
Config ISAKMP Policy with minimum 4 parameters are to be config for
crypto isakmp policy 10
authentication pre-share ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
encryption aes-256 --->2nd parameter of ISAKMP Policy is OK
hash sha ---> 3rd parameter of ISAKMP Policy is OK
group 5 ---> 4th parameter of ISAKMP Policy is OK
lifetime 86400 ------ > this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
Step 3.
Define Preshared key or PKI which you will use with other side Peer address 71.37.178.142, either key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
Here in your case in step 2 Authentication is using PSK, looks you have not defines Password
Use following command:
crypto isakmp key 0 CISCO123 address 71.37.178.142
or , but not both
crypto isakmp key 6 CISCO123 address71.37.178.142
step 4.
Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
Here is yours one:
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
or
crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
ah-sha-hmac or ah-md5-hmac
crypto ipsec transform-set TSET1 ah-sha-hmac
or
crypto ipsec transform-set TSET1 ah-md5-hmac
Step 5.
Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
crypto map ipsec-isakmp
1. Define peer -- called WHO to set tunnel with
2. Define or call WHICH - Transform Set
3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
Like in your case it is but ipsec-isakmp keyword missing in the ;ast
crypto map outside_map 10 ipsec-isakmp
1. set peer 209.117.141.82 -----> is correct as this is your other side peer called WHO in my step
2. set transform-set TSET1 -----> is correct as this is WHICH, and only one transform set can be called
!..In you case it is correct
!...set transform-set ESP-AES-256-SHA (also correct)
3. match address outside_1_cryptomap ---->Name of the extended ACL define as WHAT to pass through this tunnel
4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
Step 6.
Now apply this one crypto MAP to your OUTSIDE interface always
interface outside
crypto map outside_map
Configure the same but just change ACL on other end in step one by reversing source and destination
and also set the peer IP of this router in other end.
So other side config should look as follows:
B. Configuration in oyur Remote PEER IP having IP = 71.37.178.142 (follow step 7 to 12)
Step 7.
Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
access-list outside_1_cryptomap extended ip 192.168.100.0 0.0.0.255 192.168.200.0 0.0.0.255
Step 8.
Config ISAKMP Policy with minimum 4 parameters are to be config for
crypto isakmp policy 10
authentication pre-share ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
encryption aes-256 --->2nd parameter of ISAKMP Policy is OK
hash sha ---> 3rd parameter of ISAKMP Policy is OK
group 5 ---> 4th parameter of ISAKMP Policy is OK
lifetime 86400 ------ > this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
Step 9.
Define Preshared key or PKI which you will use with other side Peer address key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
Here in your case in step 8 Authentication is using PSK, looks you have not defines Password
Use following command:
crypto isakmp key 0 CISCO123 address 209.117.141.82
or , but not both
crypto isakmp key 6 CISCO123 address 209.117.141.82
step 10.
Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
Here is yours one:
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
or
crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
ah-sha-hmac or ah-md5-hmac
crypto ipsec transform-set TSET1 ah-sha-hmac
or
crypto ipsec transform-set TSET1 ah-md5-hmac
Step 11.
Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
crypto map ipsec-isakmp
1. Define peer -- called WHO to set tunnel with
2. Define or call WHICH - Transform Set, only one is permissible
3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
Like in your case it is but ipsec-isakmp keyword missing in the ;ast
crypto map outside_map 10 ipsec-isakmp
1. set peer 209.117.141.82 -----> is correct as this is your other side peer called WHO in my step
2. set transform-set TSET1 -----> is correct as this is WHICH, and only one transform set can be called
!..In you case it is correct
!...set transform-set ESP-AES-256-SHA (also correct)
3. match address outside_1_cryptomap ---->Name of the extended ACL define as WHAT to pass through this tunnel
4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
Step 12.
Now apply this one crypto MAP to your OUTSIDE interface always
interface outside
crypto map outside_map
Now initite a ping
Here is for your summary:
IPSec: Site to Site - Routers
Configuration Steps
Phase 1
Step 1: Configure Mirrored ACL/Crypto ACL for Interesting Traffic
Step 2: Configure ISAKMP Policy
Step 3: Configure ISAKMP Key
Phase 2
Step 4: Configure Transform Set
Step 5: Configure Crypto Map
Step 6: Apply Crypto Map to an Interface
To debug for Phase 1 and Phase 2. Store it in buffer without displaying logs on terminal.
Router#debug crpyto isakmp
Router#debug crpyto ipsec
Router(config)# logging buffer 7
Router(config)# logging buffer 99999
Router(config)# logging console 6
Router# clear logging
Configuration
In R1:
(config)# access-list 101 permit ipo host 10.1.1.1 host 10.1.2.1
(config)# crypto isakmp policy 10
(config-policy)# encryption 3des
(config-policy)# authentication pre-share
(config-policy)# group 2
(config-policy)# hash sha1
(config)# crypto isakmp key 0 cisco address 2.2.2.1
(config)# crypto ipsec transform-set TSET esp-3des sha-aes-hmac
(config)# crypto map CMAP 10 ipsec-isakmp
(config-crypto-map)# set peer 2.2.2.1
(config-crypto-map)# match address 101
(config-crypto-map)# set transform-set TSET
(config)# int f0/0
(config-if)# crypto map CMAP
Similarly in R2
Verification Commands
#show crypto isakmp SA
#show crypto ipsec SA
Change to Transport Mode, add the following command in Step 4:
(config-tranform-set)# mode transport
Even after doing this change, the ipsec negotiation will still be done through tunnel mode if pinged from Loopback to Loopback. To overcome this we make changes to ACL.
Change to Aggressive Mode, replace the Step 3 command with these commands in R1:
(config)# crypto isakmp peer address 2.2.2.1
(config-peer)# set aggressive-mode password cisco
(config-peer)# set aggressive-mode clien-endpoint ipv4-address 2.2.2.1
Similarly on R2.
The below process is for the negotiation using RSA-SIG (PKI) as authentication type
Debug Process:
After we debug, we can see the negotiation between the two peers. The first packet of the interesting traffic triggers the ISAKMP (Phase1) negotiation. Important messages are marked in BOLD and explanation in RED
R2(config)#do ping 10.1.1.1 so lo0 // Interesting Traffic
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 2.2.2.2
Mar 2 16:18:42.939: ISAKMP:(0): SA request profile is (NULL) // Router tried to find any IPSec SA matching the outgoing connection but no valid SA has been found in Security Association Database (SADB)
Mar 2 16:18:42.939: ISAKMP: Created a peer struct for 20.1.1.10, peer port 500
Mar 2 16:18:42.939: ISAKMP: New peer created peer = 0x46519678 peer_handle = 0x8000000D
Mar 2 16:18:42.939: ISAKMP: Locking peer struct 0x46519678, refcount 1 for isakmp_initiator
Mar 2 16:18:42.939: ISAKMP: local port 500, remote port 500
Mar 2 16:18:42.939: ISAKMP: set new node 0 to QM_IDLE
Mar 2 16:18:42.939: ISAKMP:(0):insert sa successfully sa = 4542B818
Mar 2 16:18:42.939: ISAKMP:(0):Can not start Aggressive mode, trying Main mode. // Not an error. By default it is configured for Main Mode
Mar 2 16:18:42.939: ISAKMP:(0):No pre-shared key with 20.1.1.10! // Since we are using RSA Signature, this message. If we use pre-share, this is where it would indicate so!
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-07 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-03 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-02 ID
Mar 2 16:18:42.939: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
Mar 2 16:18:42.939: ISAKMP:(0):Old State = IKE_READY New State = IKE_I_MM1
Mar 2 16:18:42.943: ISAKMP:(0): beginning Main Mode exchange
Mar 2 16:18:42.943: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_NO_STATE // Sending ISAKMP Policy to peer
Mar 2 16:18:42.943: ISAKMP:(0):Sending an IKE IPv4 Packet.
Mar 2 16:18:42.943: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_NO_STATE // Sending ISAKMP Policy to peer
Mar 2 16:18:42.947: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:42.947: ISAKMP:(0):Old State = IKE_I_MM1 New State = IKE_I_MM2
Mar 2 16:18:42.947: ISAKMP:(0): processing SA payload. message ID = 0
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch // Do not worry about this! Not an ERROR!
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
Mar 2 16:18:42.947:.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms
R2(config)# ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): processing IKE frag vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0):Support for IKE Fragmentation not enabled
Mar 2 16:18:42.947: ISAKMP : Scanning profiles for xauth ...
Mar 2 16:18:42.947: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
Mar 2 16:18:42.947: ISAKMP: encryption 3DES-CBC
Mar 2 16:18:42.947: ISAKMP: hash SHA
Mar 2 16:18:42.947: ISAKMP: default group 2
Mar 2 16:18:42.947: ISAKMP: auth RSA sig
Mar 2 16:18:42.947: ISAKMP: life type in seconds
Mar 2 16:18:42.947: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
Mar 2 16:18:42.947: ISAKMP:(0):atts are acceptable. Next payload is 0
Mar 2 16:18:42.947: ISAKMP:(0):Acceptable atts:actual life: 0
Mar 2 16:18:42.947: ISAKMP:(0):Acceptable atts:life: 0
Mar 2 16:18:42.947: ISAKMP:(0):Fill atts in sa vpi_length:4
Mar 2 16:18:42.947: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
Mar 2 16:18:42.947: ISAKMP:(0):Returning Actual lifetime: 86400
Mar 2 16:18:42.947: ISAKMP:(0)::Started lifetime timer: 86400.
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.951: ISAKMP:(0): processing IKE frag vendor id payload
Mar 2 16:18:42.951: ISAKMP:(0):Support for IKE Fragmentation not enabled
Mar 2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM2
Mar 2 16:18:42.951: ISAKMP (0): constructing CERT_REQ for issuer cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
Mar 2 16:18:42.951: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_SA_SETUP // Sending Key Exchange Information to peer
Mar 2 16:18:42.951: ISAKMP:(0):Sending an IKE IPv4 Packet.
Mar 2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM3
Mar 2 16:18:42.955: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_SA_SETUP // Receive key exchange information from peer
Mar 2 16:18:42.955: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:42.955: ISAKMP:(0):Old State = IKE_I_MM3 New State = IKE_I_MM4
Mar 2 16:18:42.959: ISAKMP:(0): processing KE payload. message ID = 0
Mar 2 16:18:43.003: ISAKMP:(0): processing NONCE payload. message ID = 0
Mar 2 16:18:43.007: ISAKMP:(1008): processing CERT_REQ payload. message ID = 0
Mar 2 16:18:43.007: ISAKMP:(1008): peer wants a CT_X509_SIGNATURE cert
Mar 2 16:18:43.007: ISAKMP:(1008): peer wants cert issued by cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
Mar 2 16:18:43.007: Choosing trustpoint CA_Server as issuer
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID is Unity
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID seems Unity/DPD but major 180 mismatch
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID is XAUTH
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): speaking to another IOS box!
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008):vendor ID seems Unity/DPD but hash mismatch
Mar 2 16:18:43.007: ISAKMP:received payload type 20
Mar 2 16:18:43.007: ISAKMP (1008): His hash no match - this node outside NAT
Mar 2 16:18:43.007: ISAKMP:received payload type 20
Mar 2 16:18:43.007: ISAKMP (1008): No NAT Found for self or peer
Mar 2 16:18:43.007: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:43.007: ISAKMP:(1008):Old State = IKE_I_MM4 New State = IKE_I_MM4
Mar 2 16:18:43.011: ISAKMP:(1008):Send initial contact
Mar 2 16:18:43.011: ISAKMP:(1008):My ID configured as IPv4 Addr, but Addr not in Cert!
Mar 2 16:18:43.011: ISAKMP:(1008):Using FQDN as My ID
Mar 2 16:18:43.011: ISAKMP:(1008):SA is doing RSA signature authentication using id type ID_FQDN
Mar 2 16:18:43.011: ISAKMP (1008): ID payload
next-payload : 6
type : 2
FQDN name : R2
protocol : 17
port : 500
length : 10
Mar 2 16:18:43.011: ISAKMP:(1008):Total payload length: 10
Mar 2 16:18:43.019: ISAKMP (1008): constructing CERT payload for hostname=R2+serialNumber=FHK1502F2H8
Mar 2 16:18:43.019: ISAKMP:(1008): using the CA_Server trustpoint's keypair to sign
Mar 2 16:18:43.035: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_KEY_EXCH
Mar 2 16:18:43.035: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.035: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:43.035: ISAKMP:(1008):Old State = IKE_I_MM4 New State = IKE_I_MM5
Mar 2 16:18:43.047: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_KEY_EXCH
// "MM_KEY_EXCH" indicates that the peers have exchanged DH Public keys and generated a shared secret!
Mar 2 16:18:43.047: ISAKMP:(1008): processing ID payload. message ID = 0
Mar 2 16:18:43.047: ISAKMP (1008): ID payload
next-payload : 6
type : 2
FQDN name : ASA1
protocol : 0
port : 0
length : 12
Mar 2 16:18:43.047: ISAKMP:(0):: peer matches *none* of the profiles // Normal Message! Not an error!
Mar 2 16:18:43.047: ISAKMP:(1008): processing CERT payload. message ID = 0
Mar 2 16:18:43.047: ISAKMP:(1008): processing a CT_X509_SIGNATURE cert
Mar 2 16:18:43.051: ISAKMP:(1008): peer's pubkey isn't cached
Mar 2 16:18:43.059: ISAKMP:(1008): Unable to get DN from certificate!
Mar 2 16:18:43.059: ISAKMP:(1008): Cert presented by peer contains no OU field.
Mar 2 16:18:43.059: ISAKMP:(0):: peer matches *none* of the profiles
Mar 2 16:18:43.063: ISAKMP:(1008): processing SIG payload. message ID = 0
Mar 2 16:18:43.067: ISAKMP:received payload type 17
Mar 2 16:18:43.067: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.067: ISAKMP:(1008): vendor ID is DPD
Mar 2 16:18:43.067: ISAKMP:(1008):SA authentication status:
authenticated
Mar 2 16:18:43.067: ISAKMP:(1008):SA has been authenticated with 20.1.1.10
Mar 2 16:18:43.067: ISAKMP: Trying to insert a peer 40.1.1.1/20.1.1.10/500/, and inserted successfully 46519678. // SA inserted into SADB
Mar 2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM5 New State = IKE_I_MM6
Mar 2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM6 New State = IKE_I_MM6
Mar 2 16:18:43.071: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:43.071: ISAKMP:(1008):Old State = IKE_I_MM6 New State = IKE_P1_COMPLETE
Mar 2 16:18:43.071: ISAKMP:(1008):beginning Quick Mode exchange, M-ID of -1523793378
Mar 2 16:18:43.071: ISAKMP:(1008):QM Initiator gets spi
Mar 2 16:18:43.075: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE
Mar 2 16:18:43.075: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.075: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_INTERNAL, IKE_INIT_QM
Mar 2 16:18:43.075: ISAKMP:(1008):Old State = IKE_QM_READY New State = IKE_QM_I_QM1
Mar 2 16:18:43.075: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
Mar 2 16:18:43.075: ISAKMP:(1008):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
Mar 2 16:18:43.079: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) QM_IDLE // IPSec Policies
Mar 2 16:18:43.079: ISAKMP:(1008): processing HASH payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing SA payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008):Checking IPSec proposal 1
Mar 2 16:18:43.079: ISAKMP: transform 1, ESP_3DES
Mar 2 16:18:43.079: ISAKMP: attributes in transform:
Mar 2 16:18:43.079: ISAKMP: SA life type in seconds
Mar 2 16:18:43.079: ISAKMP: SA life duration (basic) of 3600
Mar 2 16:18:43.079: ISAKMP: SA life type in kilobytes
Mar 2 16:18:43.079: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
Mar 2 16:18:43.079: ISAKMP: encaps is 1 (Tunnel)
Mar 2 16:18:43.079: ISAKMP: authenticator is HMAC-SHA
Mar 2 16:18:43.079: ISAKMP:(1008):atts are acceptable. // IPSec attributes are acceptable!
Mar 2 16:18:43.079: ISAKMP:(1008): processing NONCE payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
Mar 2 16:18:43.083: ISAKMP:(1008): Creating IPSec SAs
Mar 2 16:18:43.083: inbound SA from 20.1.1.10 to 40.1.1.1 (f/i) 0/ 0
(proxy 1.1.1.1 to 2.2.2.2)
Mar 2 16:18:43.083: has spi 0xA9A66D46 and conn_id 0
Mar 2 16:18:43.083: lifetime of 3600 seconds
Mar 2 16:18:43.083: lifetime of 4608000 kilobytes
Mar 2 16:18:43.083: outbound SA from 40.1.1.1 to 20.1.1.10 (f/i) 0/0
(proxy 2.2.2.2 to 1.1.1.1)
Mar 2 16:18:43.083: has spi 0x2B367FB4 and conn_id 0
Mar 2 16:18:43.083: lifetime of 3600 seconds
Mar 2 16:18:43.083: lifetime of 4608000 kilobytes
Mar 2 16:18:43.083: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE
Mar 2 16:18:43.083: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.083: ISAKMP:(1008):deleting node -1523793378 error FALSE reason "No Error"
Mar 2 16:18:43.083: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
Mar 2 16:18:43.083: ISAKMP:(1008):Old State = IKE_QM_I_QM1 New State = IKE_QM_PHASE2_COMPLETE // At this point tunnels are up and ready to pass traffic!
Verification Commands
#show crypto isakmp SA
#show crypto ipsec SA
Kindly rate if you find the explanation useful !!
Best Regards
Sachin Garg -
Cisco ASA 5505 not able to access flash
Hi All:
I have searched and searched all over the net for an answer to this question and have decided to just post it. I have a 5505 that was given to me by my job to use for working on my CCNA Sec. cert and did the following:
I plugged it in and booted it up just fine. Made config changes as I followed along with the examples in my CCNA Security book. Got to the point in chapter 14 where the initial setup happens to configure it for working with ASDM. I never did a write mem on it and decided to take it back to square one by unplugging it to allow it to lose the changes that I made. This is where things got ugly.
When it booted back up it got stuck in a bootup loop and couldn't find an IOS. After following all kinds of steps to boot to rommon and tftp another IOS and such (several times) I decided to follow another posting that said that the flash could be corrupted and to just delete it and start anew. Did that and through rommon as it would not boot up normally any more. After trying this over and over for the last couple hours I realized that it would boot from tftp so I did that in hopes of fixing the flash issue.
I've tried deleting it, and re-initializing it and formating it. But the thing is that it no longer SEES the disk0: mount point. I've used two different flash cards...the one that came with it and the one that I already had. With the cover off I can see that there is no activity light next to the flash drive when I issue a delete or initialize or format command.
Here is a copy of some of the output file. Any help or suggestions are greatly appreciated.
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Use ? for help.
rommon #0> format disk0:
Invalid or incorrect command. Use 'help' for help.
rommon #0> ADDRESS=10.10.10.110
rommon #1> GATEWAY=10.10.10.1
rommon #2> SERVER=10.10.10.98
rommon #3> IMAGE=asa914-k8.bin
rommon #4> tftp
ROMMON Variable Settings:
ADDRESS=10.10.10.110
SERVER=10.10.10.98
GATEWAY=10.10.10.1
PORT=Ethernet0/0
VLAN=untagged
IMAGE=asa914-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp [email protected] via 10.10.10.1
Received 27076608 bytes
Launching TFTP Image...
Cisco Security Appliance admin loader (3.0) #0: Thu Dec 5 19:38:43 PST 2013
Platform ASA5505
Loading...
IO memory blocks requested from bigphys 32bit: 9956
Àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 42.
dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
Processor memory 343932928, Reserved memory: 62914560
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 0023.339e.2a90
88E6095 rev 2 Ethernet @ index 07 MAC: 0023.339e.2a8f
88E6095 rev 2 Ethernet @ index 06 MAC: 0023.339e.2a8e
88E6095 rev 2 Ethernet @ index 05 MAC: 0023.339e.2a8d
88E6095 rev 2 Ethernet @ index 04 MAC: 0023.339e.2a8c
88E6095 rev 2 Ethernet @ index 03 MAC: 0023.339e.2a8b
88E6095 rev 2 Ethernet @ index 02 MAC: 0023.339e.2a8a
88E6095 rev 2 Ethernet @ index 01 MAC: 0023.339e.2a89
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 0023.339e.2a91
INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
INFO: Unable to read cluster interface-mode from flash
Writing default mode "None" to flash
Verify the activation-key, it might take a while...
Failed to retrieve permanent activation key.
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 10 perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 10 perpetual
Total VPN Peers : 12 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
This platform has a Base license.
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2_05
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Cisco Adaptive Security Appliance Software Version 9.1(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to [email protected].
******************************* Warning *******************************
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/)
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
Copyright (c) 1998-2011 The OpenSSL Project.
All rights reserved.
This product includes software developed at the University of
California, Irvine for use in the DAV Explorer project
(http://www.ics.uci.edu/~webdav/)
Copyright (c) 1999-2005 Regents of the University of California.
All rights reserved.
Busybox, version 1.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Busybox comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
DOSFSTOOLS, version 2.11, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
675 Mass Ave, Cambridge, MA 02139
DOSFSTOOLS comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
grub, version 0.94, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
grub comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
libgcc, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libgcc comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenseSee User Manual (''Licensing'') for details.
libstdc++, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libstdc++ comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Linux kernel, version 2.6.29.6, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Linux kernel comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
module-init-tools, version 3.10, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module-init-tools comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
numactl, version 2.0.3, Copyright (C) 2008 SGI.
Author: Andi Kleen, SUSE Labs
Version 2.0.0 by Cliff Wickman, Chritopher Lameter and Lee Schermerhorn
numactl comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
pciutils, version 3.1.4, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
pciutils comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
readline, version 5.2, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111 USA
readline comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
udev, version 146, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
udev comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Cisco Adapative Security Appliance Software, version 9.1,
Copyright (c) 1996-2013 by Cisco Systems, Inc.
Certain components of Cisco ASA Software, Version 9.1 are licensed under the GNU
Lesser Public License (LGPL) Version 2.1. The software code licensed under LGPL
Version 2.1 is free software that comes with ABSOLUTELY NO WARRANTY. You can
redistribute and/or modify such LGPL code under the terms of LGPL Version 2.1
(http://www.gnu.org/licenses/lgpl-2.1.html). See User Manual for licensing
details.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Insufficient flash space available for this request:
Size info: request:32 free:0 delta:32
Could not initialize system files in flash.
config_fetcher: channel open failed
ERROR: MIGRATION - Could not get the startup configuration.
INFO: Power-On Self-Test in process.
INFO: Power-On Self-Test complete.
INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_200804300128.log'
Pre-configure Firewall now through interactive prompts [yes]? n
Type help or '?' for a list of available commands.
ciscoasa> en
Password:
ciscoasa# format disk0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "disk0:". Continue? [confirm]
Initializing partition - done!
Creating FAT16 filesystem
mkdosfs 2.11 (12 Mar 2005)
System tables written to disk
Format of disk0 complete
ciscoasa# format disk:
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm]
Initializing partition - done!Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh disk0
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa# -
Cisco ASA 5505 Site to site VPN IPSEC tunnel to an Clavister Firewall
Hi,
I have weird problem with a Site to site VPN tunnel from a Cisco ASA 5505 to an Clavister Firewall.
When I restart the Cisco ASA 5505 the tunnel is up and down,up, down, down, and I get all strange messages when I see if the tunnel is up or down with the syntax: show crypto isakmp sa
After a while like 5-10 min the vpn site to site tunnel is up and here is the strange thing happening I have all accesslists and tunnel accesslists right I can only access one remote network (Main site Clavister Firewall) trought the vpn tunnel behind the Cisco ASA 5505, and I have 5 more remote networks that I want to access but only one remote network is working trought the vpn tunnel behind the Cisco ASA. I see that when I do this syntax in ASA: show crypto ipsec sa.
They had a Clavister Firewall before on that site before and now they have a Cisco ASA 5505 and all the rules on the main site thats have the big Clavister Firewall is intact so the problems are in the Cisco ASA 5505.
Here is some logs that ASDM give me about the tunnel issue, but like I said, the tunnel is up and only one remote network is reachable in that tunnel.....
3
Nov 21 2012
07:11:09
713902
Group = 195.149.180.254, IP = 195.149.169.254, Removing peer from correlator table failed, no match!
3
Nov 21 2012
07:11:09
713902
Group = 195.149.180.254, IP = 195.149.169.254, QM FSM error (P2 struct &0xc92462d0, mess id 0x1c6bf927)!
3
Nov 21 2012
07:11:09
713061
Group = 195.149.180.254, IP = 195.149.169.254, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 0.0.0.0/0.0.0.0/0/0 local proxy 0.0.0.0/0.0.0.0/0/0 on interface outside
5
Nov 21 2012
07:11:09
713119
Group = 195.149.180.254, IP = 195.149.169.254, PHASE 1 COMPLETED
Here is from the syntax: show crypto isakmp sa
Result of the command: "show crypto isakmp sa"
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 195.149.180.254
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
Result of the command: "show crypto ipsec sa"
interface: outside
Crypto map tag: CustomerCryptoMap, seq num: 10, local addr: 213.180.90.29
access-list arvika_garnisonen permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0
local ident (addr/mask/prot/port): (172.22.65.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.123.0/255.255.255.0/0/0)
current_peer:195.149.180.254
#pkts encaps: 2188, #pkts encrypt: 2188, #pkts digest: 2188
#pkts decaps: 2082, #pkts decrypt: 2082, #pkts verify: 2082
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 2188, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 213.180.67.29, remote crypto endpt.: 195.149.180.254
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: E715B315
inbound esp sas:
spi: 0xFAC769EB (4207372779)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 5, }
slot: 0, conn_id: 2879488, crypto-map: CustomerCryptoMap
sa timing: remaining key lifetime (kB/sec): (38738/2061)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0xE715B315 (3876958997)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 5, }
slot: 0, conn_id: 2879488, crypto-map: CustomerCryptoMap
sa timing: remaining key lifetime (kB/sec): (38673/2061)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
And here are my Accesslists and vpn site to site config:
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 84600
crypto isakmp nat-traversal 40
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map CustomerCryptoMap 10 match address VPN_Tunnel
crypto map CustomerCryptoMap 10 set pfs group5
crypto map CustomerCryptoMap 10 set peer 195.149.180.254
crypto map CustomerCryptoMap 10 set transform-set ESP-AES-256-SHA
crypto map CustomerCryptoMap interface outside
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0 -------> This is the only remote network I can reach behind the Cisco ASA and the other remote networks dont work..
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 10.1.34.5
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 10.1.20.76
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 62.88.129.221
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 172.22.71.0 255.255.255.0
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 10.1.34.5
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 10.1.20.76
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 62.88.129.221
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 172.22.71.0 255.255.255.0
nat (inside) 0 access-list nonat
All these remote networks are at the Main Site Clavister Firewall.
Best Regards
MichaelHi,
I'd start by getting the configuration of the remote site related to Local/Remote network configurations and go through them. Even though no changes have been made.
If they are mirror images of eachother already I'd say its probably some problem related to Cisco/Clavister setup
Seems especially wierd to me that one of the error messages includes 0.0.0.0 lines.
I have run into some problems with L2L VPN configurations when our Cisco device just doesnt want to work with the remote end device. In some cases we have confirmed that our networks defined for the L2L VPN are exactly the same and yet when checking debugs on the ASA side we can see the remote end device using totally wrong network masks for the VPN negotiaton and therefore it failed. That problem we corrected with changing the network masks a bit.
Maybe you could try to change the Encryption Domain configurations a bit and test it then.
You could also maybe take some debugs on the Phase2 and see if you get anymore hints as to what could be the problem when only one network is working for the L2L VPN.
- Jouni -
Cisco ASA 5505, Cisco VPN Client and Novell Netware
Hi,
Our ISP have installed Cisco ASA 5505 firewall. We are trying to connect to our Novell 5.1 server using VPN client.
I installed VPN client on a laptop that is using wireless connection. I connect using wireless signal from near by hotel and I am able to connect to my firewall usinging vpn client and also able to login in using Novell client for XP.
When I use same vpn client and Novell client at home that is not using wireless connection, but DSL connection amd not able to login or find the tree.
The only difference in two machine is laptop using wireless connection and my home machine is using wired connection using DSL.If your remote end of the services in question support IPsec IKEv1 as the VPN type then, yes - the 5505 can be a client for that service. At that point it looks like a regular LAN-LAN VPN which is documented in many Cisco and 3rd party how-to documents.
-
Firewall Cisco ASA 5505 new interface license problem
Hi
I have one ASA 5505 with a Base License
The problem is when i want to use a new named interface the system says "With current License maximum number of named interfaces allowed is 3. Name cannot be set for this interface"
And the question is if with this base license the interface cannot be used or only cannot be named?
here the output of my firewall:
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0 : address is e02f.6de6.7843, irq 11
1: Ext: Ethernet0/0 : address is e02f.6de6.783b, irq 255
2: Ext: Ethernet0/1 : address is e02f.6de6.783c, irq 255
3: Ext: Ethernet0/2 : address is e02f.6de6.783d, irq 255
4: Ext: Ethernet0/3 : address is e02f.6de6.783e, irq 255
5: Ext: Ethernet0/4 : address is e02f.6de6.783f, irq 255
6: Ext: Ethernet0/5 : address is e02f.6de6.7840, irq 255
7: Ext: Ethernet0/6 : address is e02f.6de6.7841, irq 255
8: Ext: Ethernet0/7 : address is e02f.6de6.7842, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 10
Dual ISPs : Disabled
VLAN Trunk Ports : 0
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : DisabledHi,
The ASA5505 has with Base License the limitation of 3 Vlan interface of which 1 is also limited in access (shown by the above output mentioning DMZ Restricted)
For an interface on the ASA to operate it must have a name with the command "nameif"
If you already have 3 Vlan interfaces in use then with this license you wont be able to configure 4th Vlan interface without getting a license that supports more interfaces. I guess that would be the Security Plus license.
I know that this has come as a surprise to several users that have posted here on the forums. I too think that its a needles "feature" in the ASA to limit the use of the device in such a way.
- Jouni -
So I have a weird problem that I'm hoping someone has a point in the right direction I can follow... At home I have a Cisco ASA 5505 - not very complex network some BCP configs and it's providing a NAT (PAT). I have a static IP and using a few RFC 1918 segments - like I said nothing earth shattering. I have a linksys E1200 802.11N WPA2 PSK - again pretty standard. I connect laptops, iPads, iPhones, Kindles, Androids no problem. Until recently my 60" Vizio had no issues using the network (wired or wireless). Now network is failing on the TV. I see it get to the FW and I can ping trace etc... to the TV. The FW logs show resets (log is below).
Now here is the real interesting part - if I turn the tether feature on my iPhone on and connect the TV to it - it works - what's even more interesting is if I then go back to the home network it all works again no problem until I reboot the TV... HELP!
Apr 19 15:34:09 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/60657 to outside:68.162.222.142/57003
Apr 19 15:34:09 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61988 for outside:98.137.204.251/443 (98.137.204.251/443) to inside:10.10.10.139/60657 (68.162.222.142/57003)
Apr 19 15:34:09 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61988 for outside:98.137.204.251/443 to inside:10.10.10.139/60657 duration 0:00:00 bytes 3689 TCP Reset-I
Apr 19 15:34:12 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/60658 to outside:68.162.222.142/53332
Apr 19 15:34:12 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61989 for outside:98.137.204.251/443 (98.137.204.251/443) to inside:10.10.10.139/60658 (68.162.222.142/53332)
Apr 19 15:34:12 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/37006 to outside:68.162.222.142/40015
Apr 19 15:34:12 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61990 for outside:98.136.10.32/443 (98.136.10.32/443) to inside:10.10.10.139/37006 (68.162.222.142/40015)
Apr 19 15:34:12 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61989 for outside:98.137.204.251/443 to inside:10.10.10.139/60658 duration 0:00:00 bytes 3689 TCP Reset-I
Apr 19 15:34:12 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61990 for outside:98.136.10.32/443 to inside:10.10.10.139/37006 duration 0:00:00 bytes 3689 TCP FINs
AHello ras,
As you mentioned the TV is sending a reset packet to the remote address. I will recommend you to create a capture of the traffic and review the traffic at the packet level to see a posible reason for the drop.
Here is how. Then you can download it to pcap format and uploaded to the forum for further analysis.
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/110117-asa-capture-asdm-config.html
http://www.cisco.com/c/en/us/td/docs/security/asa/syslog-guide/syslogs/logmsgs.html#pgfId-6941209
Hope this information is helpful.
Maybe you are looking for
-
15-inch Mid-2010 memory upgrade issues
Hi, I have a 15-inch mid-2010 MBP running Mountain Lion, that I upgraded from 4 to 8 Gb of memory in Sept. 2012. The memory i purchased was a 2x4 gb set of Corsair Value rated at 1333 MHz. The upgrade went smooth, and i did not have any problems for
-
Defective product purchased in this store
Good day, I would know how to proceed to send a wireless 2.0 beats studio bought this store in the attached document. I'm in Brazil and I checked on the site we have assistance beats here. With this I ask your guidance. defect: Today so I connected t
-
Home page disappears upon restart
I have a problem with fire fox changing my home page every time I shut my pc down and start it up. my home page is reset to yahoo. I know yahoo is not supported by firefox so I keep changing it to a forum that I use. but every time I log on to my pc
-
/dev/??? - what does that mean?
Hello, What does /dev/??? mean? I have received a strange message: su: 'su user1' succeeded for user2 on /dev/??? What does that thing mean? Regards, Przemek
-
Macbook Pro Screen blink with Genius bar. What should i expect?
Hello!, I have to say in my almost 20 years of being a mac user i've never had a problem with any of my mac's. I now have a minor issue with a brand new Macbook Pro that i bought on New years day. The screen has an odd blink on the upper 1/3 portion