Cisco ASA5545-X CX Application Visibility and Control and Web Security Essentials

Installed Cisco Prime Security Manager 9.3 and recently purchased lic for web security essentials but cannot find good documentation for how to configure (Blocking categories, white listing sites, etc).

You can start with the User-Guide:
http://www.cisco.com/c/en/us/td/docs/security/asacx/9-3/user/guide/b_User_Guide_for_ASA_CX_and_PRSM_9_3/prsm-ug-cx-access.html

Similar Messages

ASA5512-K9 CX AVC and Web Security Essentials

I have purchased the ASA5512-K9 with the CX AVC and Web Security Essentials L-ASA5512-AW1Y as recommended by a Cisco pre-sales representative and my reseller for my environment. I had previously believed from the documentation on the Cisco site that all X generation models had the CX software included on them in the state that they are sold. Now in trying to configure the ASA5512, and with further reading of the setup documentation, I have discovered that I do not have the capability to access the CX functionality with this model 'as is', and this combination does not appear to be appropriate. It appears that the CX software module is not actually included on the ASA5512-K9 model, but rather only on the ASA5512-SSD120-K9 model. Could someone please verify for me that I have understood this correctly?
If it is, then please advise if I should exchange the ASA5512-K9 for an ASA5512-SSD120-K9 to get the combination of this subscription license and ASA model working. Am I correct in that the ASA5512-K9 model does not have a solid state drive on it already and so I can not download and install the CX software on it? As an alternative, is it possible to purchase a Cisco solid state drive seperately, plug it into the ASA5512-K9, download the CX software, and then install it on this new drive in the ASA5512-K9?
I would greatly appreciate guidance from anyone who has experience with the ASA5512 line and CX. I was unable to find help from Cisco pre-sales and technical support for this question via phone or online chat, and my reseller has been unable to answer this question for me so far.

Hi!
According to many documents, i.e. page 3 of http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5709/ps6120/white_paper_c11-727394.pdf
An SSD is required to run AVC and WSE on ASA 5500-X Series Next-Generation Firewalls. SSD bundles have the ASA CX software image pre-loaded, and customers receive a free 60-day trial of the WSE and AVC subscriptions.
An SSD bundle is ASA5512-SSD120-K8 (or ASA5512-SSD120-K9). So If you happened to buy ASA5512-K9 - Then you definitely need this SSD option - ASA5500X-SSD120=.
Cheers.

Application Visibility And Control Bittorrent

Hello,
I can use the Application Visibility And Control does not block the traffic from Bittorrent? Or have I misunderstood?
However, I have on my WLC 2504 that configures goes Bittorrent still.
Regards

Here is the protocol list supported in NBAR2
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6558/ps6616/product_bulletin_c25-627831.html
I can see "bittorrent", "encrypted-bittorrent", "bittorrent-networking" as recognised protocol in the list, but nothing for utorrent.
From WLC code 7.5 onwards you can update these protocol packs on your controller (see below for more detail)
http://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/AVC_dg7point5.html
Protocol pack 4.1.1 is the latest for 7.5 code. Here is the more information about it.
http://www.cisco.com/en/US/docs/wireless/controller/nbar2_prot_pack/4.1.1/b_nbar2_prot_pack_411.html
Latest protocol pack (pp-AIR-7.6-13-6.3.0.pack) is available for 7.6 code version if you would like to test it out.

EM Application Log and Web Access Log growing too large on Redwood Server

Hi,
We have a storage space issue on our Redwood SAP CPS Orcale servers and have found that the two log files above are the main culprits for this. These files are continually updated and I need to know what these are and if they can be purged or reduced down in size.
They have been in existence since the system has been installed and I have tried to access them but they are too large. I have also tried taking the cluster group offline to see if the file stops being updated but the file continues to be updated.
Please could anyone shed any light on this and what can be done to resolve it?
Thanks in advance for any help.
Jason

Hi David,
The file names are:
em-application.log and web access.log
The File path is:
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_brsapprdbmp01.britvic.BSDDRINKS.NET_SAPCPSPR\log
Redwood/CPS version is 6.0.2.7
Thanks for your help.
Kind Regards,
Jason

RE:difference between application server and web application server

hi,
i am a fresher to SAP.please tell me the difference between application server and web application server so that my doubt will be clarified.

Hi,
the SAP Web Application Server is the reliable, open standard-based application server from SAP. It supports both J2EE and ABAP, and serves as the underlying infrastructure for all new and upcoming SAP solutions, like SAP R/3 Enterprise, SAP Portal, SAP Exchange Infrastructure, and all other SAP components.
The SAP Web Application Server is not a new product, it is the natural evolution of proven SAP application server technology formerly known as SAP Basis. It provides the platform to develop, execute, and operate Web applications and Web services as well as traditional SAP GUI based applications
if it helpful rewards points are appreciated

I kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

i kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

lower your font size unless you have difficulty
MS Security Essentials is excellent
Then again maybe time to investigate Windows 8 RP (which uses Defender)

Access Connections Problems With Windows 7 and Microsoft Security Essentials

There appears to be a conflict with Access Connections and Microsoft Security Essentials which causes Microsoft Security Essentials to generate high page faults and high CPU usage, and prevents normal operation of Access Connections.
After fresh install and reboot Access Connections would not launch, and when cursor was moved to the taskbar, the cursor pointer changed to a spinning loop. Clicking on the Access Connections gadget did nothing. Looking at Task Manager, Microsoft Security Essentials program msmpeng.exe was experiencing 5000+ page faults per interval. Terminating msmpeng.exe immediately caused Access Connections to launch.
System configuration: Lenovo Thinkpad x200s with Windows 7 Ultimate 64 RTM (installed with a fresh install) with all current updates, and all updates from Leovo including Access Connections V 5,42 Build 6JC725WW,
Solved!
Go to Solution.

Here is a workaround to fix the issue
1) Launch MS Security Essentials
2) Click on the "settings" tab
3) Click on "Excluded files & Locations"
4) Click "Add"
5) browse and add the following exceptions
a) C:\Users\Public\Lenovo\Access connections
b) C:\Users\Public\Lenovo\Access connections\AccConnAdvanced.html
6) Click "Save Changes"
The issue is also resolved in AC 5.5 which is posted to the web
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73682
Can someone please test both solutions and let me know if the issue is resolved.
Thanks

Thinkvantage toolbox and MS Security Essentials

I have been running MS Security essentials for some time with no problem. But recently Toolbox reports that the MS software is off when it is on, an ideas? I have tried uninstalling MS Ess but made no difference.
TIA

Toolbox will never be on one of my machines. That's a hint.

Understanding Application and Web Server Integration

Folks,
I am relatively new to web development and have some fundamental questions. I have read various articles and posts on these forums that describe the difference between an Application server and web server but haven't seen any on the integration of the two.
I have recently downloaded the Sun Java System Application Server, built a simple application with a couple of JSPs, servlets and static html pages and deployed it through a deployment tool that came with the application server.
Now, the application is accessible through my browser, so It seems the application server does everything I need, even for serving static pages. Do i need a web server? If so, would I implement a web server for design reasons and host static pages on that? Any hints on how to do this?
Your help is appreciated.
-joe

No you don not. However, if you had a large site, which experienced thousands of hits a minute, you wouldn't want to burden your application server with the overhead of serving static content. Otherwise, go for it.
As far as integrating an application server with a web server, I only have access integrating Tomcat with various web servers and it's not difficult at all. There's another post here (today as a matter of fact) where I give details for Tomcat and IIS.

What are the differences between application server and webserver

pls give the differences between application server and web server with examples

Google.
Example
http://www.google.ca/search?hl=en&q=Do+your+own+damn+searching&meta=

Ask the Expert:Cisco Web Security

With Ryan Wager
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn about design, configuration and troubleshooting of the Cisco Web Security Solutions including Cisco Ironport WSA and Cisco ScanSafe with Cisco experts Kiran Sirupa and Ryan Wager. Kiran Sirupa is a technical marketing engineer in the product marketing team for the Cisco IronPort Web Security Appliance product line. He also works on documentation, partner ,and system engineering training. Kiran has been working in the Cisco Security Technologies group for more than six years. Ryan Wager is a technical marketing engineer at Cisco in the product management team for the ScanSafe Web Security platform. He is heavily involved with the product's integration with the Cisco Integrated Services Router Generation 2 platform, along with documentation, training, and testing of all new products and features. Before joining the product management team, Wagner spent two years as an implementation engineer helping ScanSafe's largest customers implement the platform into their networks.
Remember to use the rating system to let Kiran and Ryan know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Security sub-community, discussion forum shortly after the event. This event lasts through October 7, 2011.. Visit this forum often to view responses to your questions and the questions of other community members.

Yes, the IronPort WSA will support all the security functions including Anti-Virus, Anti-Malware, Anti-Spyware, Web Reputation when working in conjunction with an existing proxy.
There are two conditions:
1. WSA acts as an upstream proxy - In this case, the authentication will be handled by your existing proxy, but the WSA is the first layer of defense. The WSA will perform a lookup in its web reputation database based on the destination. Also, The WSA can scan the http response with Anti-Virus, Anti-SpyWare and Anti-Malware software. However, since the WSA doesn't have user authentication information, you can only apply global controls for Acceptable Use.
2. WSA has to go through an existing upstream proxy - In this case, the WSA has all the security functionality. In addition, it also handles the authentication. Hence, you can apply role based controls.
You may refer to the following links for more information:
WSA Product Literature: http://www.cisco.com/en/US/products/ps10164/prod_literature.html
Cisco Security Reports: http://www.cisco.com/en/US/prod/vpndevc/annual_security_report.html
Cisco Security Intelligence Operations: http://tools.cisco.com/security/center/home.x

Difference between Client and Web

hello
i am newbie to EJB, I have started the online tutorials, on this tutorial nothing has mentioned about the difference between application client and Web application.
I am sort of confused why do we have to have both of them?
I know that web application should run from a web browser, but what happens if i ignore the application client?
I am trying to make a simple application to use ejb which connects to a databse and a web application to show the results. Can i just develope ejb and a set of jsp to interact as web application?
could someone help me please
cheers

The difference is simple:
A web client is a so called 'thin client' just displaying the information created and processed somewhere else.
A standalone client is a fat client which uses the ejb only to retrieve data and manages the user interaction by himself.
So a web application is basicly a fat client wich uses a web browser as a display (web browser is a display) thats why you have to implement a set of jsp and servlets which present the data to the user.
I you want e.g. a java program to interact with your beans to get data from the database you will have to code an application client. But it doesn seem like this, so your idea is right. Have fun implementing...

Setting OF LD_LIBRARY_PATH AND WEB CACHE PROBLEM [SHOWING PREVIOUS PAGE ]

Dear Members,
I would request for help regarding setting of LD_LIBRARY_PATH in Oracle 11G Application server and web cache problem when any single text file edit and save the result should not be changed . it shows previous page result.
*1. Where to set LD_LIBRARY_PATH in Oracle11g Application Server (10.3.0) ? [ like in 9ias we set in opmn.xml . ] Where is opmn.xml file in oracle11g or which files contained LD_LIBRARY_PATH?*
*2. When we created program generated report it shows correct result after some changes in file and generate again it shows first means previous page result as it is not take changes in that file. Even we tried out side made one .text file and open edit and save. It's given same result. So What is the problem regarding it?*
It is the matter of Browser Cache or WEB Cache. Where is the settings of it?
*3. How to connect database (oracle11g Release 2) through OCI driver?*
Regards
Vipul Patel

If you're compiling it yourself, you should set the library path then. If not, you can try something like this:
env DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:/path/to/add-on-libraries orca ...
but I'm not sure it will work.

Coded UI : Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action. Additional Details:

Hi ,
I'm trying to do a test automation using codedUI. This is a Windows application based on WPF.
I recorded the events and when playback I get a error.
There are two datetime pickers in the same form and when doing a playback one is picking up the date correctly where as the other datetimepicker is throwing the error as below.
Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action. I tried even manually selecting some offset points but still the calendarfield shows empty.
Thanks,
Jayashree

Hi Jayashree,
Thank you for posting in the MSDN forum.
>> Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action.
Please debug it with steps in this blog:
http://blogs.msdn.com/b/visualstudioalm/archive/2012/03/04/handling-playback-failures-in-coded-ui-test-due-to-stale-ui-controls.aspx
Please make sure that the target control is well truly visible on the screen, and then troubleshoot action you need to take is to check if the search has actually hit the correct target element. You can make use
of the
DrawHighlight method in your test code to validate this.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to increment array that contains two clusters whose visibility is controlled by a visible property node and selected by a radio button.

I am trying to use a property node: visible in order to enable or disable one of two clusters. These clusters are in a larger cluster and this larger cluster is in an array. The two clusters are controlled by a radio button (one labeled transistor and the other diode). When diode is selected, the corresponding diode parameters cluster should be visible and when transistor is selected, the corresponding transistor parameters cluster should be visible. In the mean time, the cluster of the device that is not selected should not be visible. There are at least 45 elements in the array (but not more than 45). Data is entered into each cluster (diode or transistor data) for each element in the array via the increment/decrement. The problem is when you select the first radio button (transistor) and enter data, when you increment the array for a new device selection, since a visible property node was used on the cluster, a loop is created where a new cluster is trying to be shown, but the old cluster is also trying to be shown (because it is the one referenced by the property node. How do I get rid of this loop and still be able to increment the array and keep my data intact for future use? Attached is the vi
Attachments:
ChooseScan.vi ‏17 KB

You could try something like this. However, if you know how to use an xcontrol, that would be a better way to implement the above functionality so that these UI characteristics are not a part of your main VI. The problem with the above VI is that you're looping every 100 ms just to update your UI.
Also, try using the "disabled" property node, instead of the "visible" one. That way, the user will still see the options he has but they will be grayed out.
Message Edited by Sudhir Gopinath on 06-25-2007 04:45 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
ChooseScan_1.vi ‏19 KB

Cisco ASA5545-X CX Application Visibility and Control and Web Security Essentials

Similar Messages

Maybe you are looking for