Cisco-avpair for both NX-OS and IOS

Using freeradius2-2.1.12. I need to setup read-write access for both Cisco NX-OS and IOS devices. I did the following,
DEFAULT Group == operator-rw, Auth-Type = System
Service-Type = NAS-Prompt-User,
cisco-avpair := "shell:roles*\"network-admin vdc-admin priv-lvl=15\""
I can log into both NX-OS and IOS devices; however, IOS devices only permits exec mode not the privileged exec (enable) mode.
Is there a different syntax that can make this work for both NX-OS and IOS?
Norman

As you have noticed IOS and NX-OS are a little bit different. With NX-OS there isn't a "disabled" mode but just netowrk roles. For IOS can try pushing for example "cisco-avpair =shell:priv-lvl=7" and then define a local priv level 7 on the network device with the needed commands
Thank you for rating!

Similar Messages

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

The following is from this Apple Document: iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 6.0 or later
Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
Apple TV (2nd generation) with Software Update 5.1 or later
You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
Apple TV (2nd generation) with Software Update 5.0 or later
For complete iCloud setup instructions, visit How to set up iCloud.
You need Mt. Lion in order to use Shared Photo Streams.
OT

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

I have one apple ID for my MAC and another used for both my iPhone and IPad. Purchases from iTunes don't appear on either my iPhone or iPad only only the MAC. How do I sync the two IDs?

I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?

Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G.

I've just bought an iPhone 5S in the UK, seems like a big mistake. I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to PC, Fix ?

I've just bought an iPhone 5S in the UK, seems like a big mistake, but luckily by law we can return goods, which is exactly what is going to happen if I cant get this to work. This is my business phone, not having it functional can cost me money.
I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to my PC, why and how do I fix it so that it doesnt go to iCloud for anything ?
The phone currently has no contacts or calendar information installed.
PC is HP Probook 4730s running Windows 7, Professional, version 6.1.7601 Service Pack 1 Build 7601.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

How do I use the same Itunes for both my IPOD and IPAD?

How do i use itunes for both my ipod and ipad? and have everything on both of them.

You can connect one of them to your computer's iTunes, select it on the left-hand side of iTunes, and then on the right-hand side select the Music tab and choose what to sync to that device - you can then connect, select and sync the same content to your other device.

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I'd say your best bet is to try to regain access to your old account. Call 1-800-MY-APPLE, and ask to talk to the account security team. Hopefully they can verify you are the account owner, and then reset the password for you.

I can't download any app into my iPAD, but I have no problem downloading app into my iPhone. Using same Apple ID for both my iPAD and iPhone.

HELP!
I couldn't download any app into my iPAD. Puzzled by this strange condition, I tried downloading the same chosen app into my iPhone. It worked!
I use the same Apple ID for both my iPAD and iPhone. So why is it not working for my iPad? Previously, both devices were working fine!
I hope that somebody can help me solve this problem.

Do the apps show as installed on the Purchased tab in the App Store app ? If they show as installed, then have you got any restrictions set on Settings > General > Restrictions (e.g. Allowed Content > Apps) that might be hiding them ?
You could try closing the App Store app completely and then seeing if it downloads after you re-open it : from the home screen (i.e.not with the App Store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
You could also try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And try logging out, and then back in, with your iTunes account : Settings > Store

Can I share my iCloud storage with my wife? I'm interested in using the storage for both phones, hers and mine.

Can I share my iCloud storage with my wife? I'm interested in using the storage for both phones, hers and mine.

You will not want to do that and you should just have two 5GB free accounts.
Too much risk of merging or losing data.

I did set up the password when I got the phone and iPad months ago but never turned it on. Now it is asking for the passwords for both my iPhones and iPad and I cannot select not the have the passwords active. ???

I did set up the password when I got the phone and iPad months ago but never turned it on. Now it is asking for the passwords for both my iPhones and iPad and I cannot select not the have the passwords active.

If you do not want to use passcodes, why don't you just go to Settings > General > Passcode Lock and delete the passcode and set the lock to OFF. That will eliminate the problems all together.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Can i maintain a same number for both the customer and vendor

Hi all,
i have a scenario, as a vendor is supplying some assembly components to the client. the client is assembling the components. and sending the same to the vendor
since the same person is acting as a vendor and a customer i want a common number for both the vendor and customer in their master data's.
Thanks
KV
Edited by: krishna vamshi on Nov 27, 2010 12:20 PM

It's not mandatory to use the same ID for vendor and customer if they are the same entity, you can use different IDs w/o any problem.
It might be difficult, if you are using internal number assignment. It may occur that the ID is already occupied by a vendor or customer.
You can link your customer to your vendor both in XK01/XK02 (LFA1-KUNNR; control tab) and XD01/XD02 (KNA1-LIFNR; "Control Data" tab). One assignment is enough.
In this case you can always see, which customer belongs to which vendor.
Sometimes plant vendors, customers are defined via external number assignment, to have the same ID as the plant, but this should be decided in advance...(separate account group is used generally, with separate number range)

Do I have to buy storage for both my iPad and my iPhone.

Di I have to buy storage space for both my iPad and my iPhone? I keep getting the message that my phone does not have enough

Where/under what circumstances are you getting this error
message? What is the exact wording of the message? With
a little more information, someone should be able to point you
toward a solution.

Cisco-avpair for both NX-OS and IOS

Similar Messages

Maybe you are looking for