Cisco C240M3 and NVIDIA Quadro 4000

I was told this week @ #vmwarepex that the C240M3 supports the quadro 4000 video card, i'm not certain, but I have yet to see anything internally to that box that would provide power required for the card.

I will move this to the Premiere Pro forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Problems with 10.8.3 and Nvidia Quadro 4000

Hi,
I have not been able to upgrade from 10.8.2 to 10.8.3 because it does not support my Nvidia Quadro 4000 for Mac. It crashes when I try to rotate an attached screen 90 degrees. It does not matter if the screen is attached to the DVI or the Display Port. Anyone else have this problem and is there a fix? I reported as a developer to Mac Developer forums with no answer and they also closed the ticket.

This problem has been solved by 10.8.4 update. So that is great news!
10.8.3 did not fix it so that is why I stayed on 10.8.2 until this latest one came out. Thanks Apple.

Speed Grade and nvidia quadro 4000 crashing Mac Pro

I cannot use SpeedGrade or render a Premiere Pro movie on CC or CC 2014 without crashing my Quadro 4000 on Mac Pro. It restarts without reading the graphic card again. I turned GPU off and now it works slowly but without crashing. Does Adobe has any answer to this? CUDA v. 6.0.46 on Mac OS Mavericks.

I will move this to the Premiere Pro forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Problems with Premiere CS6 and NVIDIA Quadro 4000

My system was working fine, but recently I started to get pop-up windows from the NVTransmit plug. These interrupted editing, and also encoding is taking as long as it did before I got the Quadro. NVIDIA support gave me new drivers and re-installed teh NV Transmit but nothing helped. My Premeiere CS6 is up to date at 6.0.2. Could this recent update be causing the problem? Any other ideas, and have you had the problem?

Use nVidia driver 311.50 http://forums.adobe.com/thread/1259391

Nvidia Quadro 4000 not working properly

Hi all,
I am really hoping that some one can help me with a very frustrating issue with my new Mac Pro and Nvidia Quadro 4000 card.
I purchased my Mac Pro from an Apple store and added the Quadro 4000, I need that card as it is supported by Adobe Premiere CS5 to enable the GPU acceleration. The reason I went to the store to buy instead of online was to get advice about the card as I have not used a Mac for 5 years now. I was told that they are not familiar with the card, but put it in and run alongside the ATI card.
When it arrived I put it all together, except for the Quadro 4000, and it all worked perfectly. I have 2 x 27” Cinema Displays attached. I installed production studio CS5 and then extremely carefully added the Quadro card.
Without going on about all the drama with it not working with the ATI card and then removing that and installing only the Quadro, it is not doing what I bought it to do. Adobe is not recognising the device, I have updated to version 5.0.3 of Premiere Pro, which supports this card.
I think I know what the problem is, but I have no idea how to resolve it. I put the Quadro in and then installed the drivers. My research says this is wrong (there were no instructions in the box and the read me file on the disc just said I need a specific cuda driver), so I removed it, put the ATI in and hunted down all the Cuda (Quadro stuff) files, deleted them, reinstalled drivers and reinstalled the card. No change, it drives one display and Premiere still cant see it.
I have tried to find answers on the internet, Apple are not very helpful as it was a third party item they have no training on (although purchased from Apple).
The only thing I have read is it may need to be on OS 10.6.5, I updated to 10.6.6 and/or because I installed the card before drivers. I have read that I need to sort out ‘Permissions’ but can’t find out how.
Any help would be greatly appreciated, I really need to get this thing working as I have a very expensive computer I can not use.
Thanks
Phil
Oh, one other thing, it is supposed to run two displays, one via display port and the other via DVI, but I am having no joy here either, and there seems to be no DVI male to MDP female adapter????

You are making it (sounds like to me) harder than it is.
You do not mention which ATI card, but you should use both side by side unless you have the 5870 which is using the two pci 6-pin power connectors on it.
With Mac OS people generally never need to delete drivers by hand.
ATI 57x0 and Quadro work better together. Or even ATI 4870 and GTX 285 in the past. Use the ATI for monitors and Quadro for CUDA and Mercury.
FYI for Quadro 4000 Mac Owners upgrading to 10.6.6:
Included in today's 10.6.6 related apple docs is one noting new Quadro 4000 owners need to Reinstall the Nvidia Quadro driver update after updating to 10.6.6.
To save you a lot of clicks (the doc links to the nvidia product page) - here's the page with the current (as of this AM) Quadro OS X 10.6.5 Driver page which still shows the 11/16/2010 driver date/v256.01.00f03. But the file I downloaded this morning is named "Retail_256.01.00f03v5.dmg" (28.9MB) - dated Dec 17th. The file I downloaded back in mid-Nov does not have the "V5" in the filename and is larger (37.3MB). I don't own this card and not dug into the pkg to see what changed (i.e. did they remove the extra kexts for other models perhaps?) but just a FYI.
http://www.xlr8yourmac.com/archives/jan11/010611.html#quadro4000
http://support.apple.com/kb/HT4499
http://www.nvidia.com/object/quadro-macosx-256.01.00f03-driver.html
Reinstall the 10.6.6 combo update manually is sometimes a good idea (some of us use only combo updates when it comes time to update OS X).
Here: http://support.apple.com/kb/DL1349

Nvidia quadro 4000 for mac and os 10.6.8 on After Effects CS6 (11.0.2) Cuda don't work

Hi,
We bought an Nvidia Quadro 4000 for Mac for use RayTrace on After Effects CS6 (11.0.2) with our Mac Pro 5.1 on OS 10.6.8.
And the Mac lost the Cuda driver when we restart it.
We use the Nvidia driver 256.02.25f01 for Mac Os 10.6.8 and we made test on different Cuda driver (4.1.25, 4.2.10, 5.0.37 and 5.0.47).
When we install Cuda driver and start directly After Effects 11.0.2 it’s works (after effects see the GPU processor).
But when we restart the Mac and try to launch After Effects, AE doesn’t see GPU processor and ask to install Cuda driver 4.0 or later.
Do you know this problem ?
Do you have a solution ?
Thanks.
And sorry for my English !

Hi All,
I'm having the exact same problem on 10.6.8 with a brand new Quadro 4000. My CUDA preferences are up to date, but After Effects CS6 is not seeing the card.
GPUSniffer gives me some really weird results, which I've included. Of particular note there is a repeated "just leaking" message, an "invalid drawable" and "Did not find any devices that support GPU computation."
Anyone have a fix for this? We just dropped a lot of money on this card so I could squeeze some more life out of this workstation (Mac Pro 4,1 dual quad 2.66 with 12GB RAM).
Last login: Fri May 31 10:20:47 on console
edit-e-room-20:~ johnlee$ /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/GPUSniffer.app/Contents/MacOS/GPUSniffer
--- OpenGL Info ---
2013-05-31 10:28:52.456 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x1046095a0 of class NSCFString autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.458 GPUSniffer[71708:903] invalid drawable
Vendor: NVIDIA Corporation
Renderer: NVIDIA Quadro 4000 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-1.6.37
GLSL Version: 1.20
Monitors: 2
Monitor 0 properties -
   Size: (0, 0, 2560, 1600)
   Max texture size: 16384
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
2013-05-31 10:28:52.467 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411d900 of class NSCFString autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.467 GPUSniffer[71708:903] invalid drawable
Monitor 1 properties -
   Size: (2560, 0, 1600, 1200)
   Max texture size: 16384
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Did not find any devices that support GPU computation.
2013-05-31 10:28:52.471 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x1041234d0 of class NSCFArray autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.471 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x1041236a0 of class NSCFArray autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.471 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411c030 of class NSView autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.471 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411c030 of class NSView autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.472 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411b000 of class NSCFArray autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.472 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x104110e00 of class NSCFArray autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.472 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411ccc0 of class NSView autoreleased with no pool in place - just leaking
2013-05-31 10:28:52.473 GPUSniffer[71708:903] *** __NSAutoreleaseNoPool(): Object 0x10411ccc0 of class NSView autoreleased with no pool in place - just leaking
edit-e-room-20:~ johnlee$

Nvidia Quadro 4000 and GeForce GT 120

Hi,
I currently have 2 CUDA cards in my MacPro and I know that PPro can only use one card at a time. I'm just trying to figure out if it is possible to tell which card PPro is using for CUDA acceleration, or hopefully to point PPro to the card I want it to use?
I'm testing out Davinci Resolve and have added a GT 120 to my system which I've put in Slot 1, and moved my Quadro 4000 to Slot 2 as per the Resolve specs.
The way I'm understanding it, is that PPro is using the GT 120 now instead of the 4000. I've noticed today a couple of outright crashes of PPro. I'm wondering it the GT 120 is responsible for that. (I did put in a Speed/Duration of 100% reverse on a clip which I think may be the problem)
My concern is that I want to continue to use the Quadro 4000 with PPro (I'm thinking, for the price I paid, it should be the higher preforming card), and not have it just sitting there, only getting used by DaVinci.
I guess my question really is, if I am not sold on going with DaVinci, does make any sense to keep the GT 120 in my tower if PPro is my main editor?
Also on a related note... is the GT 120 a better preforming card with AE? A quick render test did show the GT 120 render a comp 43secs as opposed to 62sec by the 4000.
Any insight is appreciated.
Thanks,
A.J.
www.modrew.com
MacPro OS 10.7.2
2.93 GHz Quad
12GB RAM
Nvidia Quadro 4000
Nvidia GeForce GT 120
Decklink HD Extreme 3D

one quick addition... I know the GT 120 is not a "supported" card, but I am getting Mercury Hardware playback... that's why i'm not sure if the 4000 is being used. What's leading to my confusion is the fact that After Effects will only use the GT 120 for OpenCL if both cards are installed (in either slot 1 or 2, the order doesn't seem to matter).
A.J.

NVidia Quadro 4000 and early 2008 Mac Pro (3,1)

Hi to all.
I think my display card just died.
I've been wanting to get the NVidia Quadro 4000 for a while now as I do editing professionally and would like to make the Adobe Production suite zippier.
So now, I have no functional card for my monitors. Can I use the NVidia Quadro 4000 for my Dell monitors? One of the Dell's has a DVI-D2 input but the other has only VGA as far as I can tell. Or does it make more sense to get a different card? Or both the Quadro and a lower level card?
Also, does the NVidia Quadro 4000 need extra power and if so, how easy is it to connect and would I be able to use the DVD burner?
Any ideas would be greatly appreciated.
Running Snow Leopard, 18GB RAM

So many questions and so little time... lunch!
There is Wikipedia.
AMD = OpenCL
Nvidia = OpenCL and CUDA
CUDA is part of every Nvidia card, GeForce GTX or Quadro
Open source compiler to make CUDA and OpenCL much easier and better (OpenCL is 4-5 yrs old but a pain to code and optimize with a lot of micro management. Not today but AMD's support for just OpenCL is limiting. But something to support both technologies is a year away probably.
Dual boot is a must! Clone your system / or install Lion on 2nd drive
Setup Assistant to import from 10.6 to Lion so you have both.
Clones as backup.
Out of the box: the startup is missing on screen without the modification. The drivers are normally and only found bundled into OS X which is why you don't normally see or have to go to AMD to get the latest driver. Or downgrade to a better working driver. you have to rely on OS X and version.
That is why GTX 5xx and 10.7.3
OWC charges more than Amazon or Apple and charges for 6-pin cable. The 5770 does work - with 10.6.5 or later. It does not work with older OS - no driver. It does not allow you to boot from your 10.6.0 DVD and install.
You could order the GTX 570 (I'd skp on 560, I have looked into both but up to you). And 680s are not supported yet, and still scarce. But great card for the $499.
The GTX 570 2.5GB was the one recommended with its 2.5GB VRAM. $349.
http://www.evga.com/products/
To get a boot screen means modifying the card which means sending it to Calif and $100 + shipping.
Some people use the GTX purely for CUDA and still use ATI 5770 for their monitor.
Oh, yes, died. No card on hand as backup or spare.
Shame. I'd toss coin and then go with.... Q4K but
http://www.amazon.com/PNY-DisplayPort-Profesional-Graphics-VCQ4000MAC-PB/dp/B004 CRS78O
You could wait and see. I'd over night the Q4K for $810, then see how that does, it does have 2x the VRAM. And you could use GTX 570 or 680 down the road when you do upgrade to Lion plus.
Comparing 5770 to Q4K:
http://www.jigsaw3d.com/articles/gpu-performance-review-nvidia-quadro-4000-for-m ac
Quadro CUDA driver support
http://www.nvidia.com/object/mac-driver-archive.html

I need to connect my LED cinema display to nvidia quadro 4000 graphics card

I cant find any adapter to connect my "LED cinema display" to the brand new graphics card "nvidia quadro 4000 (for Mac pro)"
As i coldnt find any information since now, ihope someone can give me a hint.

They included the wrong DisplayPort to Mini DisplayPort adapter. The correct adapter should have a female Mini DisplayPort connector, not male. You could buy the correct adapter or you could add a F-F Mini DisplayPort coupler
<http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042804 &p_id=6502&seq=1&format=2>
Try calling the, and asking for the correct adapter. They fo say:
"Connect to mini-DisplayPort displays through the included adapter cable"
<http://store.apple.com/us/product/H3314LL/A/nvidia-quadro-4000-for-mac>

Photomerge: no final image after 10.6.7 with Nvidia Quadro 4000

Hi, as it was stated in similar thread I have this issue. / http://forums.adobe.com/thread/852821?tstart=0 /
But in tha threat mentioned above, problem was solved:
"3. May 18, 2011 3:50 PM in response to: Chris Cox
Re: Photomerge Crashes
I think the problem was that there was an "ñ" in the file names. Now it works!"
My file names are: _MG_7975_1z3.psd
So probably it is not a problem with the name. I have:
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.93 GHz
Number Of Processors: 2
Total Number Of Cores: 8
Memory: 20 GB
with Nvidia Quadro 4000 installed.
After I downloaded 10.6.7 I had a problem with my graphic card, new mac OS version erased something but I solved it when I found on Nvidia forum solution and downloaded new Nvidia 4000 drivers. But help me now with new problem: photomerge - no final image. I have a huge project with extensive using of that tool. Thanks in advance!

I think that it is the answer:

Server 2012 HyperV woth Nvidia Quadro 4000

Hi
i am looking for a server, where we can use several HyperV's and we want to put in the server a Nvidia Quadro 4000 to add some graphic performance.
so my question is whether it will work or not
thank u in advance
marco
--cacciu--

Hi Marco,
Personally, I don’t have any related experience regarding this field, you may get insights from other forum community members.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to Install Nvidia Quadro 4000 in Dell R710

Hi All,
I have read a lot about installing the Nvidia Quadro PCIe x16 card in a Dell R710. I know what parts I need to order (Dell GP347 PCI-e Left Riser), but I do not know how to install the 6 pin power cable required by the Nvidia card. Where would I connect it to the Dell R710 motherboard? Is there a place to connect it? If not, is there some type of power supply I can hook the 6 pin Nvidia Power cable and provide power outside of the server? Any help would be appreciated.

This is a bit old now, but thought I would reply as I got this working and very happy with the performance!
In addition to the riser board I needed, there is NO way to provide the power the card needs without an EXTERNAL power supply. There is a really small box listed on Newegg called "ePOWER EP-450CD 450W ATX12V/EPS12V Modular Juice Box-Dedicated Graphics Card and CPU Power supply". Buy it and run the GPU power cable from an empty PCI slot out the back of the Dell Server.
I also purchased NVidia Quadro 4000 2 GB GDDR5 PCIe video cards for each of my ESXi 5.5 servers. Also, I left my built-in video graphic card enabled and it is still primary for my Hypervisor.
Download and install the NVidia ESXi drivers from their website and follow the directions to install them. Reboot.
I use sVGA with my Horizon Desktops and downloaded a trial version of Sketch-Up to test 3D. They have a community of users who post 3D renderings and you can download one directly from the Sketch-up Program. Cruise around and check the performance.
As a side note, I noticed IE worked way worse by using the GPU when Browsing the internet. Go to Advanced Settings in IE, and the top option states "Use software rendering instead of GPU". Making that change makes IE work as expected.

What is better : Nvidia Quadro 4000 or Nvidia GeForce Titan ?

Good morning,
Right now, I use Premiere Pro CS 6 with the GPU Nvidia GTX 570, but I guess that it might be better to replace my actual GPU by Nvidia Quadro 4000. Is this a good idea or not ?
Many thanks in advance.
Jacques

the encoding of pictures with some effects (zoom, pan, transparency), the encoding time is very long, even with Mercury enable, and I whish to shorten it.
Encoding is a CPU/memory task, not a CUDA task. The video card does not come into the picture at all for encoding.
What can help reducing encoding times is tuning the system, increasing memory to 24 GB and overclocking.
What will help tremenduously is adding at least two disks/volumes to your arsenal. Only a single volume (raid10) is simply not enough.
As to the system being balanced, IMO the disk setup is not enough with a single volume, the memory can be improved by going to 24 GB and the video card is already more than enough. No sense in spending anymore on that.
Did you run the PPBM5 Benchmark ?

PPro CS5 not talking to NVidia Quadro 4000...

Apologies in advance if this has been covered a million times on here (and feel free to point me to a thread), but...I have a new Mac setup, Adobe PPro CS5, and the NVidia Quadro 4000 card with MPE/Cuda. And PPro is not using the GPU.
I do have the latest drivers (for the card and for CUDA). The card was installed a month ago and I grabbed the drivers at that time.
Recently I worked on a simple 7-minute non-HD video, with no effects and minimal editing...and the publish time was 7 minutes or so.
I was expecting faster. And while it was publishing, my computer's CPU gauge said it was running at around 90%. I made sure the PPro project setting pointed towards the card GPU.Obviously the MPE and/or CUDA is not kicking in.
I have spoken to PNY (where I bought the Nvidia card) and they said if I have the latest drivers and could actually see something on my screens, then the card is working and...you know...it must be a problem with the PPro aoftware.
Oh, the Mac is a 2010 model, 8-core with a ton of RAM on it.
Thoughts?
John

You are not understanding how the MPE engine works. The MPE engine does not lower the overall load of the CPU as far as usage. It lowers the instructions ie the types of code/threads it has to handle in a given time period. The CPU has to handle all of the Decoding/encoding of the codecs/ie material that you are using. It will also have to process any non accelerated effects. It also handles all memory management and interrupts that is required by the applications, machine code, and hardware. The GPU handles the scaling, interpolation, and some of the effects besides drawing and GUID code. The CPU has to process the Decode then cache the material to ram so it can cache over to the GPU card Ram for CUDA processing. Once threading is done via the GPU then it caches back to the system ram for the CPU to final encode and adjust further frame data for effects. All of this means the entire pipeline happens faster the more load the CPU can handle focused on specific functions and at what GHz those process through the system during a given time. So basically the MPE allows the system to process more work in a given time period simultaneously essentially. So the higher the load on your CPU the faster your entire workflow will process. In simple terms, this means you want the highest CPU load you can get because that means the GPU, system ram, disks, or board throughput is not slowing anything down. Your at 62%. That means your system somewhere in the pipeline is not allowing the cpu to run at max performance in that given time period. I hope that clarify's what you are seeing and why.
And yes, OS/Application threading and caching is also included in not allowing the CPU to run at max capacity.
Eric
ADK

NVIDIA QUADRO 4000 for MAC---Issues with Adobe Premeire

Hello,
Mac Pro (Tower)
*OS 10.7.5
*2.8 GHx Quad-Core Intel Xeon
*16 GB RAM
I've had a multitude of issues with Adobe Premiere on this system and I'm not sure what to attribute it to. First of all: I have two MAC Book Pro's that run APremiere, with similiar specs and only 8GB of RAM. These two laptops run APremiere flawlessly and it's because of this reason that I can deduce, that my 'tower' is having issues because of the NVIDIA QUADRO 4000 installed; it's the only difference, besides the RAM, that the computers have. Has anyone had issues using the NVIDIA QUADRO 4000 before? Some of the issues I've been having are (please note, these issues are random, happen at random times and on random projects. The majority of the footage I use is MOV (from DSLR cameras) and MP4's (from a Sony EX-1)):
*Renders crashing
*Slow clip playback
*An oddity: certain MP4 files will go out of sync-on playback from APremiere and even in a VLC player
*AMedia Encoder crashes
Maybe the NVIDIA has nothing to do with it?
Thanks for your time and help.
Tim S.

Maybe the NVIDIA has nothing to do with it?
One way to accrue evidence would be to turn off Mercury Playback in the Project Settings.
I have that card, and turning of MPE often gets me through a session. Some here have claimed that the card is the cause of the frequent Serious Errors, and disabling it is the solution.
That's hardly satisfactory when one of the best features of Pr is the ability to use CUDA.
However, anything going through the card also has to pass through Pr and the OS. Adobe claims that updating to 10.8 fixes some bugs, but according to some here (myself included), not enough.
I had one project recently that I couldn't get the Serious Errors to stop until I re-installed the nVidia driver.
But, your list of problems could be due to corrupt Pr preferences. If you have a Mac, you need to get used to refreshing your prefs several times a day. They could also be corrupt media. That will cause renders to crash.

Cisco C240M3 and NVIDIA Quadro 4000

Similar Messages

Maybe you are looking for