Cisco CAD getting Stuck

Hi Team,
  Agents has reported that when the incoming calls comes, they are not receiving the notifcation(pop up for incoming call) and Cisco CAD getting stuck.
Highly appreciate if some one can help on this...
UCCX version-7.0(1)SR05
Warm Regards,
Sanoop

Does this always happen, or just occassionally? 
Usually when this happens, you've got an agent selected, but don't have the connect option specified in the select resource step and never added the step in the script to connect the caller through.
Another thing that can cause this is if your script allows the script to "leave" the queued logic of the select resource step.  If that's happening, it will cause this as well.
If it's an occassional problem, is it something you can duplicate on demand? 
Cliff

Similar Messages

  • Cisco Agent Desktop stuck in Reserved

    Hi guys...
    we have a UCCE 7.5.7 with CAD 7.5.8... what we have found is that when there is a large volume of inbound calls the CAD gets stuck in Reserved state for 30 seconds before it gets a call...
    Investigating this i came accross a reference that this happens when an Agent is reserved for an inbound call but the customer hangs-up at that very moment the agent was reserved...
    now... 30 seconds is quite a long time for an agent to be Reserved without doing any work... is it possible to change this behaviour and maybe cut the timer down to 5 seconds which would be acceptable...
    thnx

    I would use your lab system and try the registry setting RouteRequestTimeout (default is 30000 so probably msecs).
    \ICM\\PGn[A,B]\PG\CurrentVersion\PIMS\pimN\EAGENT\Data\Config
    I don't know if this is correct, of course. But it looks tantalizing
    Regards,
    Geoff

  • Dialing numbers gets stuck on "connecting"

    Dialing certain numbers on our Cisco phones gets stuck at "connecting".  Sometimes it drops after a few seconds, and sometimes it gets stuck there until you press the end key.  RTM doesn't even show that the call was placed.
    We are running CUCM 9.1 (phone versions 9.3.1SR1.1).  Anyone have an idea on what is going on?
    Thanks in advance!

    We've tried waiting for 30+ seconds and it stays on "connecting".  We would dial another number with the same (area code) and same first 3 digits and it would dial within a second. 

  • Ucce cad agent stuck in reserved state

    Dears,
    It is a UCCE system with CVP and CAD version 9.0
    The issue is that when the call is to be delivered to an agent, the CAD is stuck in the reserved state for around 20 seconds then it goes to the Ready state and the caller gets disconnected since I'm not configuring a queue yet.
    Has someone faced a similar issue?
    Your help is greatly appreciated.
    Thank you in advance.
    Lara

    Actually it turned out to be a call manager issue. The partition of the agent's extension was misconfigured.
    Regards.

  • Mail getting stuck in Outbox

    I am using Outlook 2007 and exchange server.  When send emails they oftentimes get stuck in the Outbox with a sent date of "None".  If I restart outlook and try resending the messages, they will oftentimes go out.  I am having to restart outlook 5 times a day right now.  Any ideas what would cause emails going out through exchange server to just "get stuck"?  Sometimes when I sent the emails and I watch the Outbox folder, the messages will appear in the outbox with a "sent" date, then after a second or so that "Sent" date will just change to "none" and the email just won't go out.  Any advice on how to troubleshoot or fix? 
    One other note...some messages just NEVER go out 9regardless of how many times I hit restart outlook and hit send) and I need to rewrite them by creating a new message and sending and that new message.
    NOTE: this appears to happen when I'm in a state where I am "Connected to Microsoft Exchange".

     DontPanicZ wrote:
    Hello,
    I found a solution that worked for me.
    See:  http://www.slipstick.com/problems/outbox.htm
    I followed the suggestions in the article and found that I had an add-in (that I did not need).  When I disabled the add-in, my problem was solved.
    Text of article follows:
    After viewing the Outbox, the messages in it won't send.
    If you click on the Outbox while messages are waiting to be sent, the messages are marked as read and won't send.
    This is caused by a Net framework add-in you have installed that 'reads' Outlook items, including the Send to OneNote from Outlook PowerToy add-in and BCM (Business Contact Manager). A list of other add-ins known to cause this behavior is listed below.
    To send the affected messages, you'll need to open the message, then switch to a different folder before clicking Send on the message. Do not go open the Outbox until after the messages are sent.
    To identify the add-in that results in this behavior:
    Look in Tools, Options, Other, Advanced, Com add-ins. Disable the add-ins and re-enable them one at a time and test.
    Since BCM and possibly other add-ins are not listed in the COM add-in list, check
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
    HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins
    Export the keys then change the LoadBehavior value to 0 to disconnect an add-in. Restart Outlook and test.
    Applications responsible
    The following is a list of some of the applications which are reported to cause message to be marked as read. If you use these or any other add-ins, check for a newer version - newer versions of some of these applications will not cause problems. 
    ICQExpress (COMAddin), installed as part of ICQ
    Business Contact Manager (BCM)
    Send to OneNote from Outlook PowerToy
    Outlock
    Outlook Backup Add-in
    Sierra Wireless Outlook Integration - disable in the registry. It's listed at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\SwiOutlookInt.Addin
    ONFOLIO
    Timeslips add-in
    Attensa for Outlook. Check for upgrade: newer versions not affected.
    Cisco Meetingplace plug-in
    MindJet Mind Manager 6. Disable the add-in in the registry - the key is Mindjet.Mm6OutlookLinker.AddIn.2
    Google desktop "search your own computer", specifically because it searches the mail
    ScanSoft PDF Converter Outlook Addin
    Norton AntiSpam Outlook Plugin
    Norton Internet Security
    AIM Sync
    LinkedIn Outlook Toolbar
    Salesforce
    Upshot Outlook integration
    MS CRM 3.0 Outlook Add-in
    Xobni
    Auto-Mate
    RingCentral Add-in
    DesktopSMS.Addin
    More Information
    If your mail won't send and it's not the problem described above, other possible causes are:
    Authentication problems: Are you logging on to the mail server correctly?
    No default mail account. If you can reply to messages but not send new message, check the account settings and make sure one is set as default. When you use a configuration script created by your mail provider or import accounts, an account is not always set as default.
    See Email Won't Send - Common Causes for more information.

  • Why after so many updates does address book keep getting stuck?

    Address book is easily the most troublesome app in OSX. My current frustration with it is that it keeps getting stuck in endless loops, requiring it to be killed and restarted, and most likely introducing more errors in the database that make for more troubles, and so on ad nauseum. Really, Apple; couldn't you make an address book that "just works" by now? Maybe it should have been kept simpler?

    I'm pretty skeptical of attributing this to anything peculiar to my current environment. I've observed continuous bad behavior by Address Book as long as there has been Mac OSX in the early 00's, often involving its interactions with Mail and Calendar. For the longest time, it couldn't undo, which made for some nasty mistakes. 
    But here's my report. I see a few red items that appear to reflect outdated things that haven't been removed or the continuous OSX complaining about Flash player versions. Let me know if you see something problematic...
    EtreCheck version: 1.9.13 (49)
    Report generated 12 August, 2014 at 13:04:48 EDT
    Hardware Information: ?
      Mac mini (Mid 2011) (Verified)
      Mac mini - model: Macmini5,2
      1 2.5 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      AMD Radeon HD 6630M - VRAM: 256 MB
      LED Cinema Display 2560 x 1440
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 3 days 23:32:36
    Disk Information: ?
      APPLE SSD TS256C disk0 : (251 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 250.14 GB (53.22 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Fujitsu Component Apple Optical USB Mouse
      Apple Inc. Apple LED Cinema Display
      Apple Inc. Display iSight
      Apple Inc. Display Audio
      Apple Inc. MacBook Air SuperDrive
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
      Apple Computer, Inc. IR Receiver
    Firewire Information: ?
      G-TECH OEM ATA Device 00 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted>: 209.7 MB
      Archive (disk1s2) /Volumes/Archive: 999.87 GB (890.88 GB free)
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Anywhere
    Kernel Extensions: ?
      [not loaded] com.Huawei.driver.HuaweiDataCardDriver (4.0.3) Support
      [not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.2.1) Support
      [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.2.1) Support
      [loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
      [loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
      [not loaded] com.cisco.nke.ipsec (2.0.1) Support
      [not loaded] com.novatel.driver.Merlin (1.7) Support
      [not loaded] com.novatel.driver.MerlinData (1.7) Support
      [not loaded] com.novatelwireless.driver.3G (2.1) Support
      [not loaded] com.novatelwireless.driver.3GData (2.1) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) Support
      [not loaded] com.sierrawireless.driver.SierraSwitch (1.2.0) Support
      [not loaded] de.novamedia.driver.NMSonyEricssonDriver (1.0.1) Support
      [not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
      [not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
      [not loaded] de.novamedia.oem.sierrawireless (1.0.4) Support
    Startup Items: ?
      AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
      AgentMon: Path: /Library/StartupItems/AgentMon
      AMPAgentBootup: Path: /Library/StartupItems/AMPAgentBootup
      CoreDuoTemp: Path: /Library/StartupItems/CoreDuoTemp
      HP IO: Path: /Library/StartupItems/HP IO
      HP USB EWS Gateway: Path: /Library/StartupItems/HP USB EWS Gateway
      HPlaserjet Trap Monitor: Path: /Library/StartupItems/HPlaserjet Trap Monitor
      Parallels: Path: /Library/StartupItems/Parallels
      patchagent: Path: /Library/StartupItems/patchagent
    Problem System Launch Daemons: ?
      [failed] com.apple.wdhelper.plist
    Problem System Launch Agents: ?
      [failed] com.apple.helpd.plist
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.barebones.authd.plist Support
      [invalid] com.bjango.istatlocaldaemon.plist
      [loaded] com.cocoatech.pathfinder.SMFHelper.plist Support
      [running] com.gadgettrak.gadgettrakdeamon.plist Support
      [failed] com.google.GoogleML.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.googlecode.munki.managedsoftwareupdate-check.plist Support
      [loaded] com.googlecode.munki.managedsoftwareupdate-install.plist Support
      [loaded] com.googlecode.munki.managedsoftwareupdate-manualcheck.plist Support
      [running] com.intego.commonservices.daemon.plist Support
      [running] com.intego.task.manager.daemon.plist Support
      [failed] com.intego.VirusBarrier.daemon.plist Support
      [failed] com.intego.VirusBarrier.logger.daemon.plist Support
      [failed] com.intego.VirusBarrier.scanner.daemon.plist Support
      [running] com.kace.ampagent.plist Support
      [running] com.kaseya.agentmon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [not loaded] com.patchagent.updateagent Support
      [failed] com.reductivelabs.puppet.plist Support
      [loaded] com.sharpcast.xfsmond.plist Support
      [failed] net.decimus.synk.synkd.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents: ?
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] com.googlecode.munki.managedsoftwareupdate-loginwindow.plist Support
      [loaded] com.googlecode.munki.ManagedSoftwareUpdate.plist Support
      [loaded] com.googlecode.munki.MunkiStatus.plist Support
      [running] com.intego.netupdate.agent.plist Support
      [loaded] com.intego.task.manager.notifier.plist Support
      [loaded] com.intego.VirusBarrier.alert.plist Support
      [not loaded] com.iteleport.connect.plist Support
      [loaded] com.kace.AdminAlert.plist Support
      [loaded] com.kaseya.update.plist Support
      [running] com.oracle.java.Java-Updater.plist Support
      [failed] de.novamedia.NML2NDeviceObserver.plist Support
      [running] net.culater.SIMBL.Agent.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.bjango.istatlocal.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ?
      EvernoteHelper
      Dropbox
      Display Menu
    Internet Plug-ins: ?
      AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      AdobePDFViewer: Version: 11.0.04 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      GoogleOneClickPluginDeluxe: Version: Unknown
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      GoogleOneClickPlugin: Version: Unknown
      RealPlayer Plugin: Version: (null) Support
      PDF Browser Plugin: Version: 2.4.4 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      VLC Plugin: Version: 1.0.5 Support
      Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 51 Check version
      OfficeLiveBrowserPlugin: Version: 12.3.5 Support
    Safari Extensions: ?
      1-ClickWeather
      Twitter for Safari (Disabled)
      Evernote Web Clipper-2
      feedly-1
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins ?
      AdobePDFViewer: Version: 8.1.0 Support
      WebEx64: Version: 1.0 - SDK 10.6 Support
      WebEx: Version: 1.0 Support
      fbplugin_1_0_3: Version: (null) Support
      Google Earth Web Plug-in: Version: 7.1 Support
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.60 Support
      Stamps.com: Version: 1.1.13 Support
    3rd Party Preference Panes: ?
      Air Display Preferences  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      GadgetTrakMacPref  Support
      Growl  Support
      iStat Menus  Support
      Java  Support
      Xmarks for Safari  Support
    Time Machine: ?
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Archive: Disk size: 931.20 GB Disk used: 101.51 GB
      Macintosh HD: Disk size: 232.96 GB Disk used: 183.39 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 
      Total number of backups: 76
      Oldest backup: 2013-08-12 12:16:27 +0000
      Last backup: 2014-08-12 16:11:51 +0000
      Size of backup disk: Adequate
      Backup size 2  > (Disk used 284.90 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          11% PluginProcess
          2% WindowServer
          1% SystemUIServer
          1% coreaudiod
          1% iStatLocalDaemon
    Top Processes by Memory: ?
      102 MB Google Chrome
      66 MB Calendar
      66 MB Mail
      53 MB WindowServer
      41 MB Google Chrome Helper EH
    Virtual Memory Information: ?
      396 MB Free RAM
      1.01 GB Active RAM
      673 MB Inactive RAM
      942 MB Wired RAM
      18.76 GB Page-ins
      781 MB Page-outs

  • Single TaskButton in the Cisco CAD Client is not functioning

    Hi ALL,
    we are facing issues with respect to Cisco CAD Client application.
    We are using I.C.M Version 7.5.8.
    1)We have a set of Task Buttons configured, where as one of the Buton is configured for a Blind Transfer(InThis Case TASK1) is not functioning randomly.
    2)We have configured this to transfer back to I.V.R.sometimes after clicking twice or thrice, it works some times it does not transfer at all.
    3)No Error is observed, except the call is not getting transferd back to I.V.R.
    4)Have gathered the  Agent Level Desktop logs and noticed TimeOut Messages .Please find below the LOG Snippet for reference.
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF1756 User clicked TASK1 button
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1780] CAppearanceEventWnd::DoActions: BEGIN
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[2105] CAppearanceEventWnd::GatherInformation: End
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1829] CAppearanceEventWnd::DoActions: Executing action Call Control
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: AC0810 Executing Action: Blind Transfer Type: Call Control, String: BlindTransfer
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF2650 BlindTransfer: Actually doing single step transfer with callID 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1047 ==================== BEGIN CompleteTransfer ====================
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1048 CompleteTransfer:                HeldCallID: 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1049 CompleteTransfer:          ConsultantCallID: 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1066 CompleteTransfer: Requesting Single Step Transfer.
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1081 CompleteTransfer: Successfully complete single step transfer call. ConsultantCallID 44529571 - HeldCallID 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1110 ==================== END CompleteTransfer ====================
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownObjectID]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180] Couldn't find CallConnection with DeviceID of 39451880.]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180]::Operation eSingleStepTransferRequest was not successful on object call.5002.44522460.12180.]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF1756 User clicked TASK1 button
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1780] CAppearanceEventWnd::DoActions: BEGIN
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[2105] CAppearanceEventWnd::GatherInformation: End
    2011-09-19 17:09:46:070 DEBUG [0xadc] AppearanceEventWnd.cpp[1829] CAppearanceEventWnd::DoActions: Executing action Call Control
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: AC0810 Executing Action: Blind Transfer Type: Call Control, String: BlindTransfer
    2011-09-19 17:09:46:070 DEBUG [0xadc] Agent: MF2650 BlindTransfer: Actually doing single step transfer with callID 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1047 ==================== BEGIN CompleteTransfer ====================
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1048 CompleteTransfer:                HeldCallID: 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1049 CompleteTransfer:          ConsultantCallID: 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1066 CompleteTransfer: Requesting Single Step Transfer.
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1081 CompleteTransfer: Successfully complete single step transfer call. ConsultantCallID 44529571 - HeldCallID 44529571
    2011-09-19 17:09:46:070 DEBUG [0xadc] PhoneDev: PD1110 ==================== END CompleteTransfer ====================
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownObjectID]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180] Couldn't find CallConnection with DeviceID of 39451880.]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0609 OnCTIOSFailureEvent: ErrorMessage [[call.5002.44522460.12180]::Operation eSingleStepTransferRequest was not successful on object call.5002.44522460.12180.]
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
    Kindly request to  give your suggestions for occurence of  this error , which is happening for only single TASK BUTTON

    Hi Sathya,
    The message below is a generic error, you will have to look more into all the PG logs (jgw, opc, pim, cg, ctios) to see why the SST is failing.
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0856 Peripheral Error: The request failed because a timeout limit was exceeded.
    2011-09-19 17:09:46:086 DEBUG [0xf58] PhoneDev: ES0598 OnCTIOSFailureEvent: Failure Code [eUnknownEventID]
    Use the HeldCallID and ConsultantCallID from agent dbg to track the call in the PG logs for further clues.
    If you are not after RCA, cycle the PG services this should help however most likely the problem might reoccur after sometime.
    Thanks,
    Shirish.

  • Rv180 gets stuck

    Hi,
    I just purchased and configured rv180 to share 15 apartements traffic. It has a 100 Mb link in wan, and 1G switch in LAN. Typically there are home  wlan routers as LAN clients. The traffic is minimal. The device replaces old pentium PC with monnowall, which was plenty enough for performance. Now the problem is that the rv180 gets stuck about once day. I can't access it remotely, nor can the users ping it. The lights are on.
    I tried now to put 10Mb QoS rate limit to see if it gets any better. Perhaps it doesn't handle packet buffers correctly, or smth. I would like to hear if this is expected quality of the product, or is this a matter of firmware  bug with memory handling or smth, or some problem with the unit?
    What's your experience?
    BR,
    Ilkka

    Thanks Samir, I had to let monowall go, due the 7 years well served old PC that was already retired desktop PC at the time, finally died
    There is nothing special in my setup. No VPN, no VLANS, no jumbo frames, no special firewall rules, no DMZ. only around ten home routers behind it. We simplified the case to minimum, but you are right, the device needs to be reset daily. Tonight I'm going to switch back the old PC, it was the PSU that failed, and I found a replacement. Weird, that the consumer technology hasn't improved to beat more than ten years old basic pentiums for simple case like this. I'm really dissappointed to the Cisco quality of these small office devices.
    I'll follow your advise and try asking cisco if the device is broken. At minimum it's not performing the job it should easily handle.
    BR,
    Ilkka

  • I was editing photos and it was getting stuck or frozen and working really slow, so I attempting to close aperture and reopen it but it won't quit aperture and now it won't open up to my photos either.  Any ideas?

    I was editing photos and it was getting stuck or frozen and working very slowly.  I attempted to restart the computer but it would not allow me to quit aperture.  Now aperture appears in my toolbar but will not open up so I can work on any photos.  Any ideas?

    Did you try opening from the Applications folder?
    Depending on how far that gets you, I would also take a look at the Troubleshooting Basics.

  • I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

    i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
    what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
    Waht to do ?

    Hello lohmann8,
    Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
    The first thing I recommend is quitting and relaunching the applications on your iPhone:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    You can find the full article here:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Logout, restart, shutdown all get stuck

    After Quicksilver G4 has been idle for a few hours and I come along to shut it down or log out, it starts the process but gets stuck at the blue screen and spinning doohickey. (not the beachball). I've let it sit for over a half hour.
    I can SSH into it and there are no stuck processes, no CPU overload, no memory overruns. It's just sitting there drooling.
    The only other symptom is that the eject key doesn't function sometimes. If it is one of those times, I can be sure it will hang on reboot. Other times the eject key works fine regardless of whether there is a disc in there or not.
    Happened with 10.5, 10.5.1, 10.5.2, but never with 10.4.x
    Strange huh?

    Open Activity Monitor (/Applications/Utilities/Activity Monitor.app), and see if you can spot any thing to do with Safari or Firefox in there.

  • SuPM home page getting stuck and couldnt able to enter

    Dear All,
    Greetings....
    we are not able to enter into SuPM home page and getting stuck while its loading.. due this cause, we have installed flashplayer_10_ax_debug (No flash player exist earlier).
    Now while loading SuPM home page in Portal, its displaying..
    Adobe Flash Player 10
    An Action Script error has occured
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
         at com.sap.xapps.analytics.sr.material.command::MaterialGetListCommand/onServiceLocatorResult()
         at com.sap.mvc.control.events::Callbacks/onResult()
         at com.sap.xapps.analytics.sr.business::WebServiceFactory/resultHandler()
         at flash.events::EventDispatcher/dispatchEventFunction()
         at flash.events::EventDispatcher/dispatchEvent()
         at mx.rpc::AbstractService/dispatchEvent()
         at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
         at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
         at mx.rpc::Responder/result()
         at mx.rpc::AsyncRequest/acknowledge()
         at DirectHTTPMessageResponder/completeHandler()
         at flash.events::EventDispatcher/dispatchEventFunction()
         at flash.events::EventDispatcher/dispatchEvent()
         at flash.net::URLLoader/onComplete()
                                                                                    [Dismiss All]    [Continue]
    i tried even by giving both options but still same issue.
    Please help.
    Regards,
    Nagarjuna

    Hi Nagarjuna
    The flex UI for SuPM is sturctured within the SUPM Portal packages OPMFNDUI and ANASUSTUI,so please re check whether you have installed the correct SuPM portal packages from service marketplace.
    Since I see some webservice related message in the log please re check the following post installation step in the installation guide :
    Configuring SAP UI Framework Web Service Proxies (look for the authorization details also).
    If you still get problem during loading the SuPM UI through portal please go to NW administrator and view the error log.
    Thanks
    Debraj Roy
    RIG APPS

  • Ipad app store is getting stuck and will not let me puchase any apps or books

    My ipad app store is getting stuck.  I can not purchase any apps or books.  It works for a few seconds and then freezes. 

    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • Photoshop CC Toolbar buttons sticking.. getting stuck on single click

    Toolbar buttons get stuck in dropdown menu with single click... it's extremely irritating especially being in photoshop all day. I have to click the intended tool button twice in order to get rid of the drop down menu options. I realize it should do this when I double click or hold down click.. but not when I simply want to select a tool with a single click.  I've tried everything. Please help!

    Try resetting the tools:
    Also try changing the mouse settings such as double click speed..
    Benjamin

  • Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the  ''Extracting''  stage for 7-8 hours after which it does not progress

    latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the  ''Extracting''  stage for 7-8 hours after which it does not progress.

    Refer to EX11....
    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

Maybe you are looking for