Cisco CallManager 4.1

Hello.
I am sorry for bad English. At me such question:
As in "Cisco CallManager 4.1" in "Device Defaults Configuration" to add phone support cisco 7925
By default such support is not present, it is possible to look a picture in an investment.
Thanks

Greetings.
Yes, on tftp all is good, all files for an insertion 7925 are present. Here the list of files: CP7925G-1.3.2.LOADS, TNUXH-1.3.2.SBN, TNUXRH-1.3.2.SBN, SYSH-1.3.2.SBN, WLANH-1.3.2.SBN, APPSH-1.3.2.SBN, GUIH-1.3.2.SBN.
In adjustment «Device Defaults Configuration» under cisco 7921 has substituted file CP7925G-1.3.2.LOADS, does not work, on phone the message «failure of updating of microprocessor maintenance» stands out
And devices cisco 7921 at reboot begin перепрошиваться under 7925 but too there is an error.
While leaves nothing!!!.
Like all I do correctly.

Similar Messages

Cisco CallManager RisPort Problem

Hi All,
In my company we are upgrading Cisco CallManager 4.1 to 5.0,In ccm5.0 How to get the Real Time Information(like Ip address of the Phone). iam using SOAP to interact with CCM 5.0 if anybody worked on this , please send me the sample code for this it is very useful for me
Thanks in advanced
Regards,
Ravindra
my personal mail id:[email protected]

Create the CDR database manually by following the steps below:
Go to Start --> Microsoft SQL --> sql query analyser
Click on file -- open --- goto c:\program files\cisco\bin\ ---- select CDR --- click open and execute the sql query
Then try to install CAR again.
HTH
//Jorge

Cisco CallManager 5.x Service Parameters

Nothing shows in Cisco CallManager Service Parameters when a service is selected (CM, Attendant Console, etc.). Has anyone seen this before?

Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

Cisco CallManager Installation

As new in Voice Networks, I have a question ! Is Cisco CallManager Solution must be installed on designated / cisco recomended hardware. I want to try it before going a head with buying stuff. Can i install it on my server machines with Windows 2000 Server ??
If any one was successfull please let me know.
thanks,
Shakeel

This is how to get CallManager 4.1.3 running on non-MCS server.
1. Install Windows 2000 server (15 gig partition). Make all passwords the same, including WIN2K account. (I used " cisco" )
2. Keep all the default installation components,
just add DHCP under Network Services,
and SNMP under Management and Monitoring tools.
3. Assign a static IP.
4. If installing in VMware, install VMware tools (under the main VM tab ) .
5. Install SP3 (at-least). (or make an win200 boot CD yourself with slipstream( google: XP slipstream)
6. Setup DHCP scope and options, don't forget to add the CISCO TFTP option 150
7. Copy the text below into a text file and name it with a .reg extension,
double click this file to make the changes to the registry.
7a) ccmreg1.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
"Version"="2000.2.6"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Service Release]
"Version"="2000.2.6sr5"
7b) install win-OS-Upgrade-K9.2000-2-7.exe
7c) ccmreg2.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Spirian]
"ProductKey"="BTOOVQESCCJUIEBI"
"Deployed"="0000000000000000"
8. copy c:\program\cisco\updates\2000 2.7sr5\shutdown.exe naar c:\utils
9. Install CallManager 4.1(3)
ccmsetup.exe
10. Go to Start >> Programs >> CCM 4 >> CallManager Administration and IE will open.
11. Go To Menu >> Application >> CCM Serviceability >> Tools >> Service Activation.
>>Click> on server u want to configure on left hand side.
>>Click> "Cisco RIS Data Collector" and press update.
>>Click> on all the services one by one and press update.
12. You should now have CallManager 4.1(3) running.
13. Upgrade OS and CCM with all patches if needed.
14 you can use P2V to make an copy of an working CM to a VMware machine

Maintaining the Directory in Cisco CallManager Attendant console

I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

Hi,
Thanks for the doc..4* for the info.
This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
2) Re-start the TCD service again.
3) Shut down the AC client and re-open it.
This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
Please rate useful posts...

Cisco Callmanager Amtskopfanzeige

Hallo zusammen
wir haben ein kleines Problem in unserer Telefonanlage und zwar...
Bei ankommenden Anrufen per Handy werden ja 2 Nullen von der Telefonanlage vorne angehängt.
Wenn jetzt Handys mit Amtskopfanzeige (Rufnummer Anzeige bei Weiterleitung – Telekom option) auf einem Telefon(mit Weiterleitung auf Handy) anrufen, werden diese 2 Nullen noch angehängt.
Siehe hier:
0151xxxxx -> 089xxxxxxx (Weiterleitung -> 0175xxxxx) = +49 (0) 0175xxxxxx (am Handy)
Somit wird die Nummer falsch angezeigt und kann auch nicht zurück gerufen werden.
Cisco Callmanager
System version: 6.0.1.2000-3
Habe auch schon ein paar Sachen in den Routepattern probiert aber ich komme irgendwie nicht weiter.
Vielen Dank und Gruß
Harald

Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

Cisco Callmanager Version 9.X on Custom Made Server

Hi Cisco
May i know can we install Cisco Callmanager version 9.X on custom made server? i plan to buy one of custom made server from third party with free dos.
Then i want to buy cisco callmanager version 9.x software to install on the custom made server. Is it possible?
Since Cisco camoe out with UCS server all the callmanager was install with vmware platform. Is it possible i install the callmanager version 9.x into custom made server with free dos.
Then i install the callmanager version 9.X into the custom made server.

UCS are only for virtualised applications, they are different from the old appliance based MCS servers. You'll need to buy UCS server, VMware licenses etc.
You can look into Cisco BE6k for that many users. BE6k is basically a UCS C220 server (other than small which is UCS E160D blade server) that comes as a bundled solution, with pre-installed VMware, pre-loaded software (CUCM, CUC, UCCX etc. install media) and normally a starter 25 licenses (you can buy additional add-on licenses as per need) so review the BE6K and see if that fits your needs. It comes in small, medium etc. different capacities.
I would also recommend installing the latest version of CUCM which is 10.5, if you have no particular reason to stick to 9.1.
Ref: http://www.cisco.com/c/en/us/products/collateral/unified-communications/business-edition-6000/data_sheet_c78-717454.html
Please do rate all helpful posts and mark the thread as answered if you have no other queries.
-Terry

Browser issues - Cisco CallManager GUI

I'm new to the forum so firstly let me say hi!
I recently got a new iPad 2, absolutly loving it. However I have one major issue.
I am a cisco voip engineer, and aqs such I need to log into my CallManager servers through the browser for the GUI interface. Through safari, and many other browsers I have tested, I can connect, login and start to work.
The issue I have is that only what is viewable on the screen is available, if the page being viewed is outside the current viewable screen area, those areas of the wb page are not available. There are no scroll bars on the side to scroll up and down on th web page.
Has anyone else experinced anything like this before, if so is there a sollution to resolve this issue?
I hoping this is not to much of a major probolem.
Thanks in advance
iCWS

You should be able to scroll the screen in those areas if you use two fingers on the screen when swiping.

Speed dial migration of each phone from cisco callmanager 4.1 to cisco callmanager 7.1

Can anyone enlighten me how to backup all the speed dial list of each phone from 4.1 callmanager to 7.1 callmanager ?

Hi Alan,
The only other way that I can think of would be to use a BAT Export from 4.x
and then BAT Import into 7.x. The header fields won't match exactly between
the old/new versions of BAT, so some re-jigging will be required
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_0_4/t03phexp.html
Cheers!
Rob

Cisco CallManager 5.1.3 Migration to CUCM 8.6

Hello
I am trying to migrate a Cisco Call Manager v5.1.3 to a new CUCM v 8.6 running on a VM.
I made a DSR backup from Call Manager v5.1.3 and try to install it in a VM running the same version (5.1.3) but I am receiving the following error message:
At least one of the servers which was requested to be restored is not connected: CUCMPUB. This may be due to Master or Local Agent being down., Restore Completed...
Any ideas about how to upgrade this server in a VM? I would not like to upgrade the production server...
Thanks in advance
Miguel Neira

Thanks for your response
The services are running...
Backup and Restore Services
Service Name Status
Cisco DRF Master
Running
Cisco DRF Local
Running

Cisco callmanager config- Reg

Hi,
I have configured the Cisco 2821 Router with call manager express 4.2 (with PRI Voice)
I have a problem two problem now.
1. when i called from out side to this PRI line. It takes more time to ring the extensions
2.It has totally 7 digit number (XXXXYYY). When i dial the first 4 digit, i get the encage tone from out side. So our customer feel that , this line is dead.
Please give some idea to resolve this problem.
Have a nice day...
Regards,
Sampathkumar.R

Hi Sampathkumar.R,
Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
Regards,
Cindy Toy
Cisco Small Business Support
Community Manager

Cisco CallManager Attendant compatible v1.3 with Windows 7?

I'm currently reviewing all software within my company to see if it is compatible with Windows 7 due t
o future upgrade of the OS we use.
I can not seem to find any info on this software, can someone please help with my question.
If this is not compatible then suggesting a compatible version or alternative would be of great help.
many thanks.

Hi
This document lists Windows 7 Compatibility:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7282/product_bulletin_c25-563280_ps5905_Products_Bulletin.html
Note that the consoles listed are no the standard CCM Attendant Console - as I understand it development of that has pretty much stopped (it's not supported for new installations) so whether or not Windows 7 official support materializes for that.. I wouldn't like to say.
Perhaps someone else can comment on whether the app actually works well on 7 or not?
Aaron

Connect Cisco CallManager to external SIP provider

I need to connect my CUCM 5.1 with sip proxy on telco side.IP phones
will connect to CUCM.
The SIP server provide 90 lines with real numbers
Following is the scenario.
Cisco IP phones----------CUCM-------WAN connection to
telco---------SIP proxy server.
Can anybody explain me how this will work, what will be the
configurations and if CUCM has the capability to control the calls
between IP phones and SIP server.

Hi Asim
It is recommended to use CUBE (IP-IP gateway)
Look following url for configuration.
http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a00808ead0f.shtml
Regards..
Mahesh Dawar
www.cisco.com/go/pdihelpdesk

ATA 186 and Cisco CallManager

I am trying to setup a cisco ATA 186 for a fax line with Cisco Call Manager 6.1.xxxx) I have a telephone hooked up to the Cisco ATA 186 and I see it register with the CCM. I have a telphone connected to port one and I get a dial tone, I can call into the phone from an outside line but it seems I cant dial to an outside number all I get is silence.
Could someone point me into a direction on troubleshooting this issue?
Thanks!

Verify software versions first.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp50035
After that, you would really need to look at traces to find out why the audio isn't getting connected. Do phones on the same subnet have audio when you call in? Does this only happen on outside calls? If it only happens on outside calls, get a sniffer to see if you see the RTP traffic coming to and from the devices.
-Steven

Cisco Callmanager 5.2 Version root password

Hello All,
I have a CCM 5.2 version, linux box. By mistake I unplugded the system power cable. Now when I restarted the system it is giving an error. One of the disks needs to do an fsck. For continuing this step I need the root password which I do not have.
Please help me to recitify this problem.
Thanks in advance
George

Dear Jaime,
Thank you so much for the reply. I had an old image of the system and I restored the same. Now it is working fine.
I found another link for rectifying the problem
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-50/111822-boot-error-00.html
Thanks
George

Cisco CallManager 4.1

Similar Messages

Maybe you are looking for