Cisco Callmanager Version 9.X on Custom Made Server

Hi Cisco
May i know can we install Cisco Callmanager version 9.X on custom made server? i plan to buy one of custom made server from third party with free dos.
Then i want to buy cisco callmanager version 9.x software to install on the custom made server. Is it possible?
Since Cisco camoe out with UCS server all the callmanager was install with vmware platform. Is it possible i install the callmanager version 9.x into custom made server with free dos.
Then i install the callmanager version 9.X into the custom made server.

UCS are only for virtualised applications, they are different from the old appliance based MCS servers. You'll need to buy UCS server, VMware licenses etc.
You can look into Cisco BE6k for that many users. BE6k is basically a UCS C220 server (other than small which is UCS E160D blade server) that comes as a bundled solution, with pre-installed VMware, pre-loaded software (CUCM, CUC, UCCX etc. install media) and normally a starter 25 licenses (you can buy additional add-on licenses as per need) so review the BE6K and see if that fits your needs. It comes in small, medium etc. different capacities.
I would also recommend installing the latest version of CUCM which is 10.5, if you have no particular reason to stick to 9.1.
Ref: http://www.cisco.com/c/en/us/products/collateral/unified-communications/business-edition-6000/data_sheet_c78-717454.html
Please do rate all helpful posts and mark the thread as answered if you have no other queries.
-Terry

Similar Messages

I have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !!

i have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !! it says it can sync them but then it does not copy them from my itunes back onto my phone ?

I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?

Retaining Custom made Icons For Automator Apps

Hello, I've noticed that when I give a custom made icon to an Automator app, it will display it on my Mac but when I send it to someone, it's original icon is displayed. Is there any way to have it display the custom made icon even when I send it to someone else?

Jerry,
I suspect you are using the old trick from the Classic OS of just transferring the icons between the Info windows.
I think there is a way to retain that icon but it is quite involved. I haven't tried this so just guessing at this point.
The normal icon for the Automator app is stored in the package that is created when you save the completed workflow. You can get access to the package by using the Show Package Contents contextual menu item in the Finder.
Inside the package you will find a number of files and folders. Within the Resources folder you will find two files related to the icons for the package, one for the Applet and one for documents.
The Applet icon file is the one that you need to work on and change to retain your modified icon. There is a little utility called Icon Composer that is an Apple product available on my machine in the Open with dropdown contextual menu. This might have been installed with the Developer tools though.
Within Icon Composer you can replace the icons within the Applet file and they should stick upon transfer to another machine. Here is the description within the help files of Icon Composer.
"You need to give IconComposer at least one image to generate an icon (.icns) file. However, you should provide four different versions of the icon. IconComposer optimizes each version for rendering at the resolutions of 128x128 pixels, 48x48 pixels, 32x32 pixels, and 16x16 pixels.
If you give IconComposer only one image, it should be optimized to look best at 128x128 pixels. This ensures it looks goods when displayed at the maximum resolution of 128x128 pixels, and looks acceptable when scaled down to the smaller resolutions.
If you supply different sizes of the icon to IconComposer, you should also provide 1-bit image masks for the three smaller resolutions. An image mask defines what parts of the icon are clickable. Assuming the color black is used to compose the image mask, any areas that are colored black in the mask define which parts of the icon can receive mouse clicks.
IconComposer can create icons from the following image formats: GIF, JPEG, PDF, PICT, PNG, TIFF, and any of the QuickTime-supported image formats. To create the actual icon file, drag the icon images to the corresponding image wells in IconComposer. Then choose Save from the File menu, which prompts you to name the icon file and choose a location for it."
So as you can see it could be quite involved.
It might be easier to develop a method to automate what you are currently doing and provide the people with a blank file that has the other icon to transfer.

Cisco CallManager Installation

As new in Voice Networks, I have a question ! Is Cisco CallManager Solution must be installed on designated / cisco recomended hardware. I want to try it before going a head with buying stuff. Can i install it on my server machines with Windows 2000 Server ??
If any one was successfull please let me know.
thanks,
Shakeel

This is how to get CallManager 4.1.3 running on non-MCS server.
1. Install Windows 2000 server (15 gig partition). Make all passwords the same, including WIN2K account. (I used " cisco" )
2. Keep all the default installation components,
just add DHCP under Network Services,
and SNMP under Management and Monitoring tools.
3. Assign a static IP.
4. If installing in VMware, install VMware tools (under the main VM tab ) .
5. Install SP3 (at-least). (or make an win200 boot CD yourself with slipstream( google: XP slipstream)
6. Setup DHCP scope and options, don't forget to add the CISCO TFTP option 150
7. Copy the text below into a text file and name it with a .reg extension,
double click this file to make the changes to the registry.
7a) ccmreg1.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
"Version"="2000.2.6"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Service Release]
"Version"="2000.2.6sr5"
7b) install win-OS-Upgrade-K9.2000-2-7.exe
7c) ccmreg2.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Spirian]
"ProductKey"="BTOOVQESCCJUIEBI"
"Deployed"="0000000000000000"
8. copy c:\program\cisco\updates\2000 2.7sr5\shutdown.exe naar c:\utils
9. Install CallManager 4.1(3)
ccmsetup.exe
10. Go to Start >> Programs >> CCM 4 >> CallManager Administration and IE will open.
11. Go To Menu >> Application >> CCM Serviceability >> Tools >> Service Activation.
>>Click> on server u want to configure on left hand side.
>>Click> "Cisco RIS Data Collector" and press update.
>>Click> on all the services one by one and press update.
12. You should now have CallManager 4.1(3) running.
13. Upgrade OS and CCM with all patches if needed.
14 you can use P2V to make an copy of an working CM to a VMware machine

Cisco Callmanager Amtskopfanzeige

Hallo zusammen
wir haben ein kleines Problem in unserer Telefonanlage und zwar...
Bei ankommenden Anrufen per Handy werden ja 2 Nullen von der Telefonanlage vorne angehängt.
Wenn jetzt Handys mit Amtskopfanzeige (Rufnummer Anzeige bei Weiterleitung – Telekom option) auf einem Telefon(mit Weiterleitung auf Handy) anrufen, werden diese 2 Nullen noch angehängt.
Siehe hier:
0151xxxxx -> 089xxxxxxx (Weiterleitung -> 0175xxxxx) = +49 (0) 0175xxxxxx (am Handy)
Somit wird die Nummer falsch angezeigt und kann auch nicht zurück gerufen werden.
Cisco Callmanager
System version: 6.0.1.2000-3
Habe auch schon ein paar Sachen in den Routepattern probiert aber ich komme irgendwie nicht weiter.
Vielen Dank und Gruß
Harald

Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

You can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use the latest version of iphoto

you can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use latest version of iphoto. iphoto 11 is installed.

This is a message you got?
If so, as your post isn't clear, it may be a bogus message caused by a corrupt database.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

When I buy a custom made calendar using iPhoto, what dpi or resolution does Apple print the pictures at?

When I buy a custom made calendar using iPhoto, what dpi or resolution does Apple print the pictures at?

The dpi you supply up to a max of 300 DPI as I understand it
LN

Custom made Toolbar on WAD

can some one guide me how to start creating a custom made toolbar in WAD which will show graphical charts for the Tabular data being displayed on the web template

How was the 'custom toolbar' created? Since everyone is having issues, it could be an issue with the 'custom' code.
. : | : . : | : . tim

Can I transfer a custom made pattern from Illustrator to Photoshop?

HI all,
I have created a custom made pattern in solid black in Illustrator and would like to use it as a defined shape in Photoshop, can I do this?

First, create the pattern in Illustrator and save it as a pattern swatch. Apply the pattern to a certain size squares to your liking, expand it, then flatten the transparency copy and paste from Illustrator to Photoshop as a path/smart object.
From there, you can define it as a pattern in Photoshop.

Cisco CallManager RisPort Problem

Hi All,
In my company we are upgrading Cisco CallManager 4.1 to 5.0,In ccm5.0 How to get the Real Time Information(like Ip address of the Phone). iam using SOAP to interact with CCM 5.0 if anybody worked on this , please send me the sample code for this it is very useful for me
Thanks in advanced
Regards,
Ravindra
my personal mail id:[email protected]

Create the CDR database manually by following the steps below:
Go to Start --> Microsoft SQL --> sql query analyser
Click on file -- open --- goto c:\program files\cisco\bin\ ---- select CDR --- click open and execute the sql query
Then try to install CAR again.
HTH
//Jorge

Custom-made components & midp4palm

Hi all,
I've developed two simple custom-made components by subclassing canvas. One is a simple button, which you can push with the palm pointer.
The other is a sort of textfield. The problem arises when I try to input text into this component... the Palm does not have a keyboard! And the little keyboard which pops when you press the dot under the "abc" image does not pop!
Is there some way to make that keyboard appear?
Any help would be greatly apreciated.
Thanks,
Estanis.

the current api does not allow text to be placed into the canvas class. i would recommend u to use a textbox class. so if the user clicks on the canvas screen, it will call up the textbox class and allows the user to key in some data.then upon returning back to the canvas class, u can just update the display using repaint method.
hope this helps.
regards,
joseph

Custom Made Authorization Object ZPLANT

Hi
We have custome made auth objects; zplant, zcountry, zsalesrg etc. We are getting problems with one of the report we created; based on a MP. When user access the report, some of them getthe error that "Warning you do not have authorization to read object ZPLANT Authorization at plant".
The user has access to 4 plants and can access other reports based on the Infocubes that is used in the MP. Also some of the user gets warning for ZSALESORG etc..
We are getting this error only for the newly created report; Have any of you faces such type of problem? If yes then can you advice me how to resolve it?
Thanks in advance
Ishi

Hi there again,
Sorry my mistake, it is S_RS_ICUBE instead of S_RS_CUBE. In that authorization you can specify the InfoCubes or MultiCubes alloweded to display. Your multiprovider might be included or not in that object.
S_RS_COMP and S_RS_COMP1 is for BEx.
You can include this:
S_RS_COMP:
Activity: 03, 16 (display and execute)
InfoArea: * (all of them, or sepcify an InfoArea where the InfoProviders which contains the queries are)
InfoCube: * (all of them, or specify the InfoProviders which have the queries you want the users to run)
Name (ID) of a reporting compo: * (all of them)
Type of a reporting component: CKF, QVW, REP, RKF, STR, VAR
S_RS_COMP1:
Activity: 03, 16 (display and execute)
Name (ID) of a reporting compo: * (all of them)
Type of a reporting component: * (all of them)
Owner (Person Responsible) for: * (all of them)
You can also use transaction RSSMQ to execute a query with another user and analise the authorizations of that user.
Diogo.

Cisco ACS version 4.2 patch update

Dear All,
I am using cisco ACS version 4.2 (0) Build 124 and i would like to upgrade it with latest patch .Can anyone provide me the step by step procedure for the upgrade through serial console or through GUI.
It would be also appreciate if if you could provide me the exact link / patch for 4.2(0) release.
Regards..

Ciscoworks can use various mechanisms to discover the devices on your network.
The network administrator can discover the devices using different protocols, such as Cisco Discovery Protocol, BGP, OSPF, Address Resolution Protocol (ARP), HSRP, cluster, routing table, and ping sweep on IP range, that are activated at different layers of the Open Systems Interconnection (OSI) model in the device.
It has a benefit when the devices on the network will not be better responsive to any other modules of Discovery.
Usually other module learn IP of the neigbour device with their data, like asking CDP neighbour details or OSPF Table. Whereas in Ping Sweep LMS will simply continue to check devices based on the IP Range.
Example, if you selected Ping Sweep On IP Range, you can specify the seed device as 10.77.209.209 and the subnet mask as 255.255.255.240. Entering a smaller subnet mask value may result in a longer discovery cycle, as discovery has to sweep IP addresses from more networks. It is recommended to enter a Class C mask instead of a Class A or B mask.
So using Ping Sweep helps you find your devices faster of it is failry simple network with simple range of IP's on devices, may be on a single subnet.
More details on How Ping Sweep Algorithm Works technically behind, in LMS, is available here:
https://supportforums.cisco.com/docs/DOC-9005#Ping_Sweep_On_IP_Range
This document describes, in depth about all modules used in LMS Device Discovery.
Hope it will be helpful to understand.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Variants functionality for a custom made report

Hello everybody,
i want to integrate the variant functionality we all know from reports in a custom made report (Dynpro). Is there any kinda generic functionality available you can hook up with? Like FMs or something?
best regards,
Markus

Hello,
maybe i should start from the very beginning. I am developing an application/report which has besides standard input fields a table (editable Grid Control) as selection fields.
I started off using the selection-screen functionality and integrated the Grid Control as a subscreen. Working great. But as it come to developing the functionaility "variant saving" i went into a problem. The standard input field were covered by the SAP standard functionalities, but not the table (grid control).
What i managed to implement using the possibility of custom code at the standard events AT SELECTION-SCREEN and AT SELECTION-SCREEN OUTPUT was when you click on the save button in a report to save my table content in a own database table with the link to the name of the standard variant. (Systemfield VARI hold the data). I even was able to load my saved table data, when loading a variant. This worked only on the first run (event initialization), as clicking on the load variant button in a report does NOT give me any return-code, like pressing the save button. It just raises the event PBO, as does pressing the enter button. So my problem is, i do not have the info at runtime, whether someone has pressed the load variant button and selected a variant or whether someone just pressed the return key, both do invoke PBO and i cant tell the difference.
So i had the idea of instead of using a report, developing a own dynpro application (Module pool).
best regards,
Markus

Cisco Callmanager Version 9.X on Custom Made Server

Similar Messages

Maybe you are looking for