Cisco Catalyst 3750X-24T-S Switch

It has been a while since I checked on these switches. Is it OK to now use the 15.0.2-SE6 IOS or should we continue to stick to the 12.2.58-SE2 version?

I would stick with 12.2.58-SE2 version for a while, if you don't need any feature that is not supported by this version.
HTH

Similar Messages

Cisco Prime Infrastructure 2.2: Catalyst 2960X-24TS-LL Switch Collection Failure

Hello,
I've Upgraded Prime Infrastructure to Version 2.2.0.0.158. Now our Catalyst 2960X-24TS-LL switches show an error message, when they are added to the inventory. The error is as follows:
Partial Collection Failure; Collection Status : Failed feature(s).
The 2960X-24TS-LL is listed under the supported devices list and other switches (e.g. WS-C2960X-48FPS-L) got inventorized without any problems.
Did anybody see this issue and can tell me how to solve it.
- Benjamin

- Getting that one too, since running 2.2 (Failed Features) ; suggest opening a TAC case.
M.

Last version Cisco Catalyst 2960-24PC-L Switch (bugs study)

Hi team,
I need know, what´s the last IOS version to Cisco Catalyst 2960-24PC-L Switch and understand the bug study about these versions?
How make a bug study?
If you have any information, please let me know.
Regards,
Yerko.

Latest release as of January 14th is 15.0.2-SE5 (Release Nov 6, 2013)
There aren't any public utilities in the Cisco website that provides you with a bug study.
We have a bug tracker https://tools.cisco.com/bugsearch/?referring_site=popular but it will be extremely time consuming to identify each bugs and if you are affected.
If you are a Cisco Advanced customer with optimization services in your contract, this deliverable can be done for you at no cost.

Recommended IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch

Could someone confirm IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch please.
It already has 03.06.00.E on it. I am planning to configure VSS on it with similar switch.
VSS will participate in various Etherchannels (MES).
Just wondering if there are any known bugs in this IOS XE release.

Use the Bug Search Tool to look for issues with vss, vsl, etc.
https://tools.cisco.com/bugsearch/

Upgrade of Cisco Catalyst 3750G 24T

Hi,
I want to upgarde a Cisco Catalyst 3750G 24T because I can't see the web interface.
I checked the documentation and see a lot of videos on the net.
I downloaded the new firmware c3750-ipbasek9-mz.122-55.SE9.bin
I downloaded a tftp software and putted my ip adress on it.
I connected the Cisco by console and launched Putty by serial.
I sended en for grant my right access.
I sended my password
and tapped :
copy tftp: flash:
it asks TFTP Ip, i gave it
10.0.0.45
file name
i gave it
c3750-ipbasek9-mz.122-55.SE9.bin
and after It sended me when it must put it and i sended the same name.
c3750-ipbasek9-mz.122-55.SE9.bin
And then It works few seconds and the cisco says error ... time out.
I've tested with W8, W7 and a lot of tftp server. I disabled my firewall.
The password is the default password. It is a problem ?
Can you help me ?
Thanks
Nicolas

Copying only the BIN files into the appliance will NOT help. You still won't be able to use the web interface.
You need to download the full IOS, the filename ends with TAR. To unpack the file into your appliance you use the command "archive download-sw tftp://<TFTP IP address>/filename.tar".

Error in switch ports POE model, "Cisco Catalyst 2960S-24PS-L Switch"

I have problem with the poe switch Cisco Catalyst 2960S-24PS-L posts does not respond, and me the following error resporta was t
%PLATFORM_ENV-3-ILP_PORT_POST_ERR: %s can’t be brought up because it failed POST
in Inline Power test.
he source of that error and what are the possible causes

Hey Dustin,
Device needs to be RMA'ed. The inline power supply has failed.
HTH.
Regards,
RS.

Cisco Catalyst 2924 xl Series Switches

How I can restore the basic IOS on the switch. The switch have no ios. The switch prompt on Switch: not Switch# or switch>.
Thanks
Syed Hasan,
[email protected]

Hi Syed,
You have to first check if there is any image in switch or not so that you can manually boot from switch: prompt but as you said there is no image in the switch you have to go for xmodem procedure to upgrade the switch.
Have a look at this link and just follow step by step instructions and you will be good to go
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml#xmodem
HTH, if yes please rate the post.
Ankur

Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches

Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S     .1.3.6.1.4.1.9.1.1466
C3560CG8PC         .1.3.6.1.4.1.9.1.1317
C3560CCG8TC     .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS     .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback Erich

Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian.

RPS and Cisco Catalyst 2950 and 3550 switches

We are doing experiments with RPS and CC 2950 and 3550. When we unplug the main power, the RPS takes over and feeds the switch with power. But when we plug the main power back again, the switch contiues to take power from the RPS. How is the power reduncancy achieved with CC 2950 and/or 3550s?
Thanks in advance,
Dardan

You will need to press the active/standby button on the RPS for the internal power supply in the switch to take over. Note that this can cause the switch to reload and do it in your maintenance window if this switch is in production.
http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdx81023

Netflow on Cisco Catalyst 3750 Metro Series Switches

Does netflow possible in 3750 metro series?

Hi Syed,
You have to first check if there is any image in switch or not so that you can manually boot from switch: prompt but as you said there is no image in the switch you have to go for xmodem procedure to upgrade the switch.
Have a look at this link and just follow step by step instructions and you will be good to go
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml#xmodem
HTH, if yes please rate the post.
Ankur

Cisco Catalyst 2960-X and Cisco Prime compatibility

Hello All,
I had review all the compatibility matrix of versions of Cisco Prime 1.2, 1.4 and 2.0, and just can't find the Cisco Catalyst 2960-X series as a listed device, which really surprises me.
Can you clear that out??
Thanks,

The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
(PI 2.1 won't be out until later this year, release date not yet announced.)
Following are the 2960X/XR types added:
Cisco Catalyst 2960-X Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960X-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1699
>=12.1
IOS
Cisco Catalyst 2960X-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1690
>=12.1
IOS
Cisco Catalyst 2960X-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1691
>=12.1
IOS
Cisco Catalyst 2960X-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1692
>=12.1
IOS
Cisco Catalyst 2960X-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1693
>=12.1
IOS
Cisco Catalyst 2960X-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1694
>=12.1
IOS
Cisco Catalyst 2960X-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1695
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1696
>=12.1
IOS
Cisco Catalyst 2960X-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1697
>=12.1
IOS
Cisco Catalyst 2960X-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1698
>=12.1
IOS
Cisco Catalyst 2960X-24PSK-L Switch
OID:1.3.6.1.4.1.9.1.1700
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-S Switch
OID:1.3.6.1.4.1.9.1.1701
>=12.1
IOS
Cisco Catalyst 2960X-24PS-S Switch
OID:1.3.6.1.4.1.9.1.1702
>=12.1
IOS
Cisco Catalyst 2960X-48TS-LL Switch
OID:1.3.6.1.4.1.9.1.1703
>=12.1
IOS
Cisco Catalyst 2960X-24TS-LL Switch
OID:1.3.6.1.4.1.9.1.1704
>=12.1
IOS
Cisco Catalyst 2960-XR Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960XR-48FPD-I Switch
OID:1.3.6.1.4.1.9.1.1797
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-I Switch
OID:1.3.6.1.4.1.9.1.1798
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-I Switch
OID:1.3.6.1.4.1.9.1.1799
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-I Switch
OID:1.3.6.1.4.1.9.1.1800
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-I Switch
OID:1.3.6.1.4.1.9.1.1801
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-I Switch
OID:1.3.6.1.4.1.9.1.1802
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-I Switch
OID:1.3.6.1.4.1.9.1.1803
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-I Switch
OID:1.3.6.1.4.1.9.1.1804
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-I Switch
OID:1.3.6.1.4.1.9.1.1805
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-I Switch
OID:1.3.6.1.4.1.9.1.1806
>=12.1
IOS
Cisco Catalyst 2960XR-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1807
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1808
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1809
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1810
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1811
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1812
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1813
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1814
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1815
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1816
>=12.1
IOS

Cisco Catalyst 3750G

What is different between Cisco Catalyst 3750G-24-TS-S 1U and Cisco Catalyst 3750G-24-TS-S 1.5 U, Other than Size( Any other technical difference)

Hi Kali ,
Size only matters when compare both the switches.
Cisco Catalyst 3750G-24TS
24 Ethernet 10/100/1000 ports and 4 SFP ports; 1.5RU
Cisco Catalyst 3750G-24TS-1U
24 Ethernet 10/100/1000 ports and 4 SFP ports; 1 RU
Thanks,
satish

Is it Possible to Create 13 DHCP pools in CISCO-WS-3750X-24S-S for 13 VLANS-1000 users?

Hi
Our Client has purchase the following products:
CISCO WS-3750X-24S-S Qnty: 1
CISCO WS-C2960X-48TS-L Qnty: 20
CISCO WS-C2960X-24TS-L Qnty: 6
CISCO AIR-CT2504-25-K9 Qnty: 1
CISCO AIR-CAP1602E-C-K9 Qnty: 23
Total LAN User: 812-820 and Wireless Users: 256-512.
Total No of VLANs = 13 (Including Wireless network and Management VLAN)
Client has no DHCP server and has decided to configure the Distribution Switch 3750 as DHCP server.
Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
Can It Handle the DHCP Load of the LAN users and Wireless users together?
The only thing I can do is to Move the Wireless DHCP in the Wireless LAN Controller.
Please suggest if configuring the 12 DHCP pool in the Distribution switch will be Appropriate for this network infrastructure.
If you have any other query please feel free to ask.

Can we configure 12 DHCP pools for LAN users and wireless users in the Cisco WS-3750X-24S-S switch?
I believe you can configure this much DHCP pools.
Can It Handle the DHCP Load of the LAN users and Wireless users together?
It can. DHCP is not CPU intensive. Plus you have lease time.
Besides, it's a small network. Should work. The main thing though is this: Why so many VLANs?
Downside is you don't have much features. You can't trace a MAC address from weeks ago. DHCP profiling is also not supported.

CiscoWorks LMS 4.0.1 + Catalyst 3750X - User Tracking Issue

Hello all,
We just deployed some Catalyst 3750X-48PF-L switches. I noticed that the user tracking report doesn't work normally.
The switches have C3KX-10Gb NM modules, and all access port are 1 Gbit. But in the User Tracking report, I see devices found on Fa0/43 for example (this is because the previous switch was a Catalyst 2960. I deleted the old switch and add the new 3750X, so this could not be the cause of the problem).
I installed all the patches that are available for LMS 4.0.1.
Could anybody help me please?
Thanks in advance!

Any old entries won't automatically be removed until they age out (I believe 90 days is the default time). You can override / modify that by going in to Admin > Network > Purge Settings > User Tracking Purge Policy.
If that fails, you could re-initaitlize the User Tracking db and re-run a Major Acquisition to refresh everything but that would also have the effect of deleting all historical UT entries you may want to keep.
To reinitialize a db, please see the procedures posted here. ANI is the db used by User Tracking.

Cisco Catalyst 2960X-24PS-L - Management Issues

I am having issues connecting to the new Cisco Catalyst 2960X-24PS-L switches via USB.
I am successfully connecting from the same PC to Cisco 2960C series and Cisco 2960S switches, but the 2960X switches aren't always working.
Any hints?
Matt

So I was able to get it working:
Updated to latest version of Putty, connected something to a switch port and then made sure flow control was off.
A bit different than the older switches.

Cisco Catalyst 3750X-24T-S Switch

Similar Messages

Maybe you are looking for