Cisco Catalyst 4507R+E with WS-X4748 blade, ports not working
I have a Cisco Catalyst 4507R+E (with Sup7-E) and two blades; one WS-X4748-RJ45V+E and one WS-X4648-RJ45-E.
When I connect a device to a port on the WS-X4748-RJ45V+E blade the port will not come up, show interface shows the status as "notconnect". When I connect the same device to the WS-X4648-RJ45-E blade the interface comes up.
The WS-X4748-RJ45V+E blade seems to have initialised okay, it appears in the output of "show module" as OK.
I get exactly the same effect on a second, identically configured Catalyst 4507R+E.
The software version is IOS XE 3.1.0SG, which according to the release notes supports the WS-X4748-RJ45V+E blade. Has anybody else seen anything like this?
I have 2 Core switches, single SUP on each.
Line cards #1 and #2 randomly stop forwarding packets, only solution is to reload the switch ( hw-module reset does not work ). I have cat4500e-universalk9.SPA.03.05.00.E.152-1.E.bin and the sympton looks the same as the described one,
although the code is newer than 3.2.2SG.
Now we are downgrading to cat4500e-universalk9.SPA.03.04.02.SG.151-2.SG2.bin to check if that solves the issue,
otherwise we´ll try removing/re-inserting the modules, and if issue persists, most probably RMA the Core1.
We´ve sent a show tech to Cisco support while the issue was happening.
Current modules on the Core switches.
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT EEE (RJ45) WS-X4748-RJ45-E CAT1627L48B
2 48 10/100/1000BaseT EEE (RJ45) WS-X4748-RJ45-E CAT1629L0ZY
3 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E CAT1629L1PD
5 12 1000BaseX (SFP) WS-X4612-SFP-E JAE163007EO
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 30f7.0d57.80c0 to 30f7.0d57.80ef 1.1 Ok
2 30f7.0dac.fd40 to 30f7.0dac.fd6f 1.1 Ok
3 30f7.0dca.6c00 to 30f7.0dca.6c03 2.1 15.0(1r)SG10 03.05.00.E Ok
5 a493.4c44.13e8 to a493.4c44.13f3 1.1 Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor SSO Active
Similar Messages
-
20" Cinema display with USB and firewire ports not working
I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help pleaseVerify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device. -
i am confused if this one
Cisco Catalyst 4507R Module WS X4424GB RJ 45, Multi-speed Gigabit Ethernet Switching Module (24-port)
would be compatible to its chasis if change by this one
WS-X4424-GBRJ45-RF
Catalyst 4000 24port 101001000 Module RJ45 REFURBISHEDYes it you get the refurbished with the good one then it would get detected and works fine.
BTW- This module is EOL /EOS and below is the replacement part for the same:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/eol_c51_574038.html
WS-X4424-GB-RJ45
Catalyst 4500 24-port 10/100/1000 Module (RJ45)
Replacement-PartWS-X4548-GB-RJ45
Catalyst 4500 Enhanced 48-Port 10/100/1000 Base-T (RJ-45)
HTH
Regards
Inayath
***** Plz rate all usefull posts. -
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
-
hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?
Have you changed the system voice to an English one in system preferences?
-
Help and support sends you in circles and does not help redeem a card with a code that does not work.
Well, they have a website, but here is a link to their information about unlocking iPhones.
http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=6d7EKuCF_dr
You may not qualify for an unlock though. -
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP
I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default. -
hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?
I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.
-
Command.text with ODBC escape sequence is not working in VC++. The Code, which written in VB is working perfectly. Is there any different syntax in VC++ or bug in
OLE DB provider ?. I am using OraOLEDB 8.1.7 version.
Thanks
Mani
VB Code
' Enable PLSQLRSet property
Cmd.Properties("PLSQLRSet") = True
' Stored Procedures returning resultsets must be called using the
' ODBC escape sequence for calling stored procedures.
Cmd.CommandText = "{CALL corpuser.GetCorpUserRec(?, ?)}"
Set Rst1 = Cmd.Execute
VC++ Code (while execute it is giving error )
pCommand->CommandText = "{CALL corpuser.GetCorpUserRec(?, ?)}";
pRs1 = pCommand->Execute(NULL,NULL,adCmdStoredProc);Hi
The odbc escape sequence for calling stored procedures works fine with VC++ also.
You can check the sampe application at following url :
http://otn.oracle.com/sample_code/tech/windows/ole_db/content.html
Hope this helps
Chandar -
I have a iPhone4S acquired in Portugal. I will be moving to the EQUATOR (South America). Whenever I have visited the country before, with other cellphones, they did not work (different band) forcing me to buy a local cellphone. Will my iPhone4S work there?
If it is unlocked it will work if you get a SIM from the carrier you will be using. Note that Apple does not and cannot unlock phones. Only the carrier it is presently locked to can unlock it.
-
Anyone had issues with on/off sleep button not working anymore
Anyone had issues with on/off sleep button not working anymore?
If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.
-
CISCO CATALYST 4507R+E + Supervisor 8-E
Hi,
I need help and clarification regarding the software license of Sup 7-E and Sup 8-E. Based on the catalog it ships with IOS XE universal image? Here are my inquiries.
1. With IOS XE universal image, what is the software license installed in Sup 7-E and Sup 8-E? Is it LAN Base or IP Base?
2. Is there an option to purchase the Sup 7-E or Sup 8-E with an Enterprise Base license?
3. How many priority queue does it support?
Thank you,Please find answer:
1- Cisco provides LAN Base software only when purchasing SUP7E or SUP7L-E bundle with a single Supervisor, in all other cases IP Base license is provided at no additional cost.
There will continue to be three packages: LAN Base, IP Base, and Enterprise Services. ( IP Base and Enterprise services to be purchases seperately)
2-
Q. Which licenses are available for Supervisor Engine 7-E, 7L-E or a Cisco Catalyst 4500-X Series system?
A. See Table 1 for package licenses. These will be delivered with new Supervisors or available as an upgrade through Cisco software activation. The Cisco Catalyst 4500-X Series only supports IP Base (default) and Enterprise Services (as an upgrade).
Table 1. Package licenses
Package Name
Prerequisites
License Types
LAN Base
None
Permanent
IP Base
IP Base
Permanent, temporary
Enterprise Services
IP Base
Permanent, temporary
Q. Where can I learn more about Cisco software activation?
A. http://www.cisco.com/go/sa.
3- http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/white_paper_c11-539588.html
HtH
Regards
Inayath
*Plz dont forget to rate usefull posts. -
Cisco Catalyst 4503 + WAAS with WCCP
Hello community!
Do I need to intercept traffic with WCCP on a Cisco Catalyst 4503! Does anyone have a sample configuration for this scenario?
I tried several settings, but without success.
I have this alarm in Cisco WAAS:
WCCP router 10.10.10.10 unusable for service id: 62 reason: Assignment method mismatch with router
Thank's
David ThimottiWCCP router 10.10.10.10 unusable for service id: 62 reason: Assignment method mismatch with router
That indicates your WAAS device is sending an assignment method (probably HASH) that is not supported by this 4500.
In the 4500 scenario WAAS must be L2 adjacent, and configured for L2-redirect and MASK assignment, and L2-return (if your version of WAAS supports it).
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/12.2/15.02SG/configuration/guide/wccp.html#wp1000978
I'm not sure what version of WAAS you are running.
If running WAAS 5.x your config will look like this (since the defaults are l2-redirct, mask, and l2 return).
wccp router-list 1 10.10.10.10
wccp tcp-promiscuous service-pair 61 62
router-list-num 1
enable
exit
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/command/reference/glob_cfg.html#wp2067854
If running WAAS 4.x your config will look like this:
wccp version 2
wccp router-list 1 10.10.10.10
wccp tcp-promiscuous service-pair 61 62 failure-detection 30
wccp tcp-promiscuous service-pair 61 62 router-list-num 1
wccp tcp-promiscuous service-pari 61 62 l2-redirect mask-assign l2-return
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/command/reference/glob_cfg.html#wp2067854 -
Catalyst 2960S-LPS-L PoE only on specific ports not working
Hi,
we have Catalyst 2960S-LPS-L (48 Ports) here which in general works fine.
If i connect a Cisco Access Point (2602), it´s powered up via PoE, but on some ports this is not working; it just doesn´t power up. The port configuration is exactly the same. I rebooted the switch, but still the same.
Any ideas how to troubleshoot this? Is it possible, that the PoE capability on some ports is just broken?
Thanks
HeinzHi,
it did all this, but there are no irregularities. IOS is version 152-1.E2
#sho post
Stored system POST messages:
Switch 1
POST: MA BIST : Begin
FC 1 MBIST Test Passed.
DP Sg1 MBIST Test Passed.
DP Xg1 MBIST Test Passed.
NI 1 MBIST Test Passed.
FC 0 MBIST Test Passed.
DP Sg0 MBIST Test Passed.
DP Xg0 MBIST Test Passed.
NI 0 MBIST Test Passed.
UPB MBIST Test Passed.
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
#sho power inline
fti-mco01-ssw01#sho power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
1 370.0 84.7 285.3
2 370.0 56.7 313.3
3 370.0 169.4 200.6
Interface Admin Oper Power Device Class Max
(Watts)
Gi1/0/1 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/2 auto off 0.0 n/a n/a 30.0
Gi1/0/3 auto off 0.0 n/a n/a 30.0
Gi1/0/4 auto off 0.0 n/a n/a 30.0
Gi1/0/5 auto off 0.0 n/a n/a 30.0
Gi1/0/6 auto off 0.0 n/a n/a 30.0
Gi1/0/7 auto off 0.0 n/a n/a 30.0
Gi1/0/8 auto off 0.0 n/a n/a 30.0
Gi1/0/9 auto off 0.0 n/a n/a 30.0
Gi1/0/10 auto on 6.3 IP Phone 7912 n/a 30.0
Gi1/0/11 auto off 0.0 n/a n/a 30.0
Gi1/0/12 auto off 0.0 n/a n/a 30.0
Gi1/0/13 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/14 auto off 0.0 n/a n/a 30.0
Gi1/0/15 auto off 0.0 n/a n/a 30.0
Gi1/0/16 auto off 0.0 n/a n/a 30.0
Gi1/0/17 auto off 0.0 n/a n/a 30.0
Gi1/0/18 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/19 auto off 0.0 n/a n/a 30.0
Gi1/0/20 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/21 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/22 auto off 0.0 n/a n/a 30.0
Gi1/0/23 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/24 auto off 0.0 n/a n/a 30.0
Gi1/0/25 auto on 6.3 IP Phone 7940 n/a 30.0
Gi1/0/26 auto off 0.0 n/a n/a 30.0
Gi1/0/27 auto off 0.0 n/a n/a 30.0
Gi1/0/28 auto off 0.0 n/a n/a 30.0
Gi1/0/29 auto off 0.0 n/a n/a 30.0
Gi1/0/30 auto off 0.0 n/a n/a 30.0
Gi1/0/31 auto off 0.0 n/a n/a 30.0
Gi1/0/32 auto off 0.0 n/a n/a 30.0
Gi1/0/33 auto off 0.0 n/a n/a 30.0
Gi1/0/34 auto off 0.0 n/a n/a 30.0
Gi1/0/35 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/36 auto off 0.0 n/a n/a 30.0
Gi1/0/37 auto on 6.3 IP Phone 7960 n/a 30.0
Gi1/0/38 auto on 15.4 AIR-SAP2602I-E-K9 3 30.0
Gi1/0/39 auto off 0.0 n/a n/a 30.0
Gi1/0/40 auto off 0.0 n/a n/a 30.0
Gi1/0/41 auto off 0.0 n/a n/a 30.0
Gi1/0/42 auto on 6.3 IP Phone 7912 n/a 30.0
Gi1/0/43 auto off 0.0 n/a n/a 30.0
Gi1/0/44 auto off 0.0 n/a n/a 30.0
Gi1/0/45 auto off 0.0 n/a n/a 30.0
Gi1/0/46 auto off 0.0 n/a n/a 30.0
Port G1/0/44 is not delivering PoE; Port G1/0/38 has exactly the same configuration and it´s working.
Maybe you are looking for
-
Airport Express - want only to use it for connecting a printer wirelessly
Ugh... have opened up a brand new Canon printer and plugged it into a new Airport Express and hoped that it would somehow talk to my iMac across the room but no luck. Apple Store boy said no problem - click and plug and play... but alas no. Right now
-
How to install Whatsapp to Lumia 2520, since it is not available in the Microsoft Store? Can't install from WhatsApp website too, since I'm getting a message saying the device is not registered with microsoft, even though I registered. Further I use
-
How to find my program in smartform
Hi Guys There is a Zsmartform developed also created Z driver program for that. that is not yet assigned in NACE . How can i know the that form is called by driver program . i want know what is the driver program creted for that like finding in sap
-
Attributes value in Organizational Model
HI, Iu2019ve created a new attribute for a org unit in scenario service. Itu2019s attribute REGIOGROUP based on values of this field of table ADRC. Now, I need to maintain attribute values for this attribute for each OU to get BP determination. The p
-
Oracle Database Administartor Training
Dear All, Can anyone help me in finding a online training for Oracle Database Administrator for Oracle 10g on OPN Competency Center website. I have founded one but it is for Oracle 11g Databases. Kindly help me in finding this training. And I think t