Cisco chs435hdc Er04 001

I have had Verizon Fios for a little over a month, and every so often upon turning on my new Cisco chs435hdc DVR and hitting the DVR button, an error message pops up saying Er04 001 and a countdown begins then the DVR turns itself off at the end of the countdown. Any help with this issue would be fantastic.
Thank you

Todd:
I have had the same issue for months and the response from Anthony at Verizon is typical. He doesn't address your issue because he has no idea what the issue is. If you Google this error message, surprisingly, you will find little to no information, except for maybe my similar posts on this forum from several months ago. I have talked to numerous Verizon support people. Most have no idea, but I did find a guy who was aware of the issue and said they were working on it. I even sent him some diagnostic information, but I never heard back and the issue is still happening for me.
I can tell you that it is not a box issue, I've returned my box and the same thing happens on the new box. I thought it might be a signal issue, but Verizon is telling me it is a software issue. The part that upsets me, though, is Verizon does not have a list of error messages from Cisco for this box and they don't even know what it means. Seriously. Which is beyond ridiculous when you consider how much money Verizon is paying Cisco for this equipment. If you go to Cisco's site, this model number does not show up under their list of cable boxes. But if you try hard enough, you can find the user guide to the box on the Web, but it does not have a list of error messages.
The frustrating thing about this whole saga is that the error will happen randomly and it never happens when I'm actually watching FiOS. Usually, when I get home from work and turn on the TV, the error message appears. This morning, when I turned on the TV it happened again. 
Hear that Verizon? Your users are frustrated. And they seem to know more about the error message than you.

Similar Messages

  • Boot times/issu​es for Motorola vs. Cisco DVRs

    We have a solar powered home, and I'd like to keep our DVR off during the night when we're not recording anything to save power.    Is there any difference in the boot time or issues around repeated booting between the Cisco Chs435hdc, and Motorola 7232 DVRs?
     I noticed that the Motorola consumes less power (22W vs. 27W) so would like to switch from the Cisco to the Motorola all else being equal.   How can I switch my DVR to the Motorola 7232?      (we just started our service)
    Thanks for any help!

    Unfortunately we don't have any stats on the boot times between the respective units. While I understand your want/need to power the boxes down at night they are actually designed to stay on ( in a lower power state when off) so they can accept guide data and software updates. Since they are designed to stay on we can't really speak to the effect repeated booting would have on the units over time. To address your swap question we will need some further information.  Please look for a private message in your forum inbox.
    Lee_VZ

  • Cisco SAS Cable (R200-SASCBL)

    I quite urgently need the following cable -> Cisco R200-SASCBL-001=
    Unfortunately I cannot find a reseller in Germany who has this cable on stock
    The estimated shipping time is more than three weeks - that's too late
    Now I am looking for a cable that has the same specifications from a third party vendor.
    My question:
    What are the specifications of the original Cisco cable?
    I know, that is has a SFF-8087 connector which connects to the LSI MegaRAID 9260-4i (in a Cisco C200 M2 rackserver).
    More specific, here are the questions, that I cannot answer at the moment:
    - What connectors do I need on the other end of the cable?
    - Do I need a crossover cable?
    - What is the length of the cable?
    Kind regards,
    Volker Kurth

    Hello Volker,
    Did you receive the cable along with the shipment of the server ?
    Please check with your Cisco Accounts team on alternate options to ship the cable.
    Also, using third party cables is not supported but it might work.
    Padma

  • FiOS Mobile App and DVR

    Hello,
    I have 2 Cisco CHS435HDC DVR's that are connected to my home network. The other day I downloaded the FiOS Mobile app and wanted to see if I can watch my recorded shows or schedule new shows using this app. The app recognizes I have 2 devices but it doesnt display my recordings or schedules. In the app it also says the devices are not connected to the network but I can tell they are. Both my phone and the devices are on the same subnet/network so no firewalls or routes are in play.
    One thing to note is that I have business service but there is no support forum on the business side so I'm hoping someone here can help.
    1. How can I configure the app to connect to the DVR's or configure the DVR's to broadcast whats needed so they are seen on the network by the app? I cant figure out what I need to do here. (Note I activated and authorized all the devices and accounts)
    2. In the DVR I cant seem to find where to change the IP address if for example I wanted to specify a static IP.
    3. If I wanted to also connect via the internet what ports do I need to forward through my firewall?
    Thanks in advance.

    I have my phone registered under Menus\Settings\Remote DVR\Mobile Phone Settings. This is where I registered my phone nunber and it provided a confirmation code. My iPhone works great. Note there is an older App that was replace by a newer app. Make sure you have the latest application for your device.
    I am not sure if a plain iPAD or other non phone devices work. I know there had been some complaints, and some requests for applications for non phone devices. Not sure on the status.
    I requested one that did not require to go to the Verizon site and back. Why not a local App on the local Wifi? And Also a remote control application developed for your PC? All can be found on The ideas boards, along with many other ideas.

  • Need more speed to my PC

    I recently upgraded to Verizon Fios.  The house has coax wiring.  As part of the install they put an Actiontec MI424WR router in the upstairs office and a Cisco CHS435HDC DVR downstairs in the family.  As far as I can tell everything was working fine.
    I started thinking now that I have hi speed internet maybe I should check out Pandora, Netflix and whatever else is available through my TV and AV receiver.  Since I had a wireless card lying around, I pop that into my computer. With the router next to the PC, the speed was fine.  When I moved the router down stairs the speed on the PC dropped significantly.  It’s never more than 7Mbps and it’s usually around 3 or 4 Mbps.  Up load speed are just under 5Mbps.  I tried every coax connection in the house and had similar results.  I also notice that the MoCA light in the ONT is flashing.
    What do I need to do to get the 15Mbps as advertised on my computer and at the same time have access to Pandora and Netflix and similar items on my TV and receiver?

    EasyRunnin wrote:
    I also moved the computer down to the family room to see if the speed improved.  It worked very well when it was near the router.  So I figure the wiring is fine and that it is a WiFi issue.  Is there a relative easy and economical way to improve the speed up in the office?
    You might want to investigate HomePNA powerline networking. This uses your home's existing in-wall electrical cabling to create a network. You can buy a two-piece transmitter/receiver kit for around $70. Plug one side in near the router in the family room, and the other side upstairs near the desktop computer. That should deliver full Ethernet speed--much faster than Wi-Fi--with no need to run new Ethernet cabling.

  • Config air-lap1041n-e-k9 with cisco 5500 (5508) series wireless controller. how to?

    Hi!
    I try to configure a Cisco 5508 Wireless controller and 25 Air-lap1041 to use as VoIP and data. I read documents, manuals, etc, but the AP doesn't charge the configuration, or not conect with the Wireless Controller, why? No Radius server present, only WPA security.howto, please...
    I try to put a static ip in the LAP, with lwapp or capwap command, (LWAPP/CAPWAP ap ip address direccion mascara) and the AP returns "You should configure Domain and Name Server from controller CLI/GUI." and i can't change the name of the AP (Command is disabled).
    Log from AP:
    using ÿÿÿÿ ddr static values from serial eeprom
    ddr init done
    Running Normal Memtest...
    Passed.
    IOS Bootloader - Starting system.
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    Xmodem file system is available.
    DDR values used from system serial eeprom.
    WRDTR,CLKTR: 0x83000800, 0xc0000000
    RQDC, RFDC : 0x80000037, 0x00000184
    PCIE0: link is up.
    PCIE0: VC0 is active
    PCIE1: link is NOT up.
    PCIE1 port 1 not initialize
    PCIEx: initialization done
    flashfs[0]: 6 files, 2 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32385024
    flashfs[0]: Bytes used: 2369024
    flashfs[0]: Bytes available: 30016000
    flashfs[0]: flashfs fsck took 21 seconds.
    Reading cookie from system serial eeprom...Done
    Base Ethernet MAC address: 44:2b:03:dc:09:25
    Ethernet speed is 1000 Mb - FULL duplex
    Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...###########################
    File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entr
    y point: 0x4000
    executing...
    enet halted
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
    SE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 01-Jun-10 12:53 by prod_rel_team
    Proceeding with system init
    Proceeding to unmask interrupts
    Initializing flashfs...
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    flashfs[1]: 6 files, 2 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32126976
    flashfs[1]: Bytes used: 2369024
    flashfs[1]: Bytes available: 29757952
    flashfs[1]: flashfs fsck took 7 seconds.
    flashfs[1]: Initialization complete.
    flashfs[2]: 0 files, 1 directories
    flashfs[2]: 0 orphaned files, 0 orphaned directories
    flashfs[2]: Total bytes: 11999232
    flashfs[2]: Bytes used: 1024
    flashfs[2]: Bytes available: 11998208
    flashfs[2]: flashfs fsck took 1 seconds.
    flashfs[2]: Initialization complete....done Initializing flashfs.
    Ethernet speed is 1000 Mb - FULL duplex
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1041N-E-K9    (PowerPC405ex) processor (revision B0) with 98294K/32
    768K bytes of memory.
    Processor board ID FCZ1611W414
    PowerPC405ex CPU at 333Mhz, revision number 0x147E
    Last reset from reload
    LWAPP image version 7.0.94.21
    1 Gigabit Ethernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 44:2B:03:DC:09:25
    Part Number                          : 73-14034-04
    PCA Assembly Number                  : 800-34273-05
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC16075VZ3
    Top Assembly Part Number             : 800-34284-03
    Top Assembly Serial Number           : FCZ1611W414
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1041N-E-K9
    % Please define a domain-name first.
    Press RETURN to get started!
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:00:09.574: *** CRASH_LOG = YES
    Base Ethernet MAC address: 44:2B:03:DC:09:25
    *Mar  1 00:00:09.838: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
    (contains, 1024 messages)
    *Mar  1 00:00:11.848: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
    to up
    *Mar  1 00:00:11.892: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
    SE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 01-Jun-10 12:53 by prod_rel_team
    *Mar  1 00:08:16.954: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
    ernet0, changed state to up
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    *Mar  1 00:08:28.047: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
    LER
    *Mar  1 00:08:28.049: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:09:08.282: %CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASS
    IC_NO_INJECTOR_CONFIGURED AIR-CT5508-K9 (c464.138f.9345)
    *Mar  1 00:09:08.282:  -Verify the required power-injector is installed on this
    port: AIR-CT5508-K9(Gig 0/0/2).
    *Mar  1 00:09:08.282:  -If a power-injector is installed, issue the command:"pow
    er inline negotiation injector installed"
    *Mar  1 00:12:19.976: %CAPWAP-5-STATIC_TO_DHCP_IP: Could not discover WLC using
    static IP. Forcing AP to use DHCP.
    *Mar  1 00:12:29.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    *Mar  1 00:12:39.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    *Mar  1 00:12:49.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    *Mar  1 00:12:59.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    *Mar  1 00:13:09.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    Not in Bound state.
    *Mar  1 00:13:19.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
    not have an Ip !!
    *Mar  1 00:13:19.993: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
    . Renewing DHCP IP.
    logs from wireless controller:
    (Cisco Controller) >show interface summary
    Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Gu
    est
    ap-manager                       2    untagged 209.165.200.231 Dynamic Yes    No
    management                       1    untagged 209.165.200.230 Static  Yes    No
    service-port                     N/A  N/A      192.168.1.157   Static  No     No
    virtual                          N/A  N/A      1.1.1.1         Static  No     No
    (Cisco Controller) >
    i conect with service-port ok  and the management port works, i think.
    AP442b.03dc.0925>ping 209.165.200.230
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 209.165.200.230, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    AP442b.03dc.0925>
    Help, please!
    i write in spanish:
    Hola:
    Tengo que configurar un cisco 5508 wireless controller con 25 air-lap1041n, para usarlo como acceso de datos y voz. ¿Cómo lo hago? He leído manuales, y seguido las instrucciones, pero el punto de acceso parace que no es capaz de cargar el perfil. No hay servidor radius, solo la configuración de una clave wpa. Alguién me puede indicar pasos, Gracias

    Hi!
    I buy a gigabit switch. I connect the service-port to gigabit switch, and laptop to gigabit switch. I used 192.168.1.x ip address (192.168.1.157 to service-port and 192.168.1.233 to wired port on laptop, well, the laptop has two ip adress, 192.168.1.233 and 209.165.200.2, and the laptop works ok. Ping to 209.165.200.230 -ip address of management interface- and ping to 209.165.200.203 -ip address for AP, is assigned by  DHCP of WLC. And i connect the ap to gigabit switch, and the wlc assigns well an ip direction.
    I post the run-config and sysinfo log. The gigabit switch is tp-link model tl-sg1005d, no configuration.
    Before the logs, I see this message from AP:
    *Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
    version 6.0.199.4  ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC? 
    Hola:
    He comprado un switch gigabit. Conecto el service-port al switch gigabit y el portátil también (por cable). Uso como direcciones ip el rango 192.168.1.x (192.168.1.157 asignado al service-port y 192, 168.1.233 al portátil, bueno, el portátil tiene dos direcciones, la dicha anteriormente y la 209.165.200.2) El portátil funciona bien, hace ping al 209.165.200.230 - la ip de la management interface, y a 209.165.200.203 - ip asignada al AP por el DHCP del WLC. He conectado el AP al swtich gigabit, y el dhcp del wlc asigna correctamente una dirección ip.
    Añado a continuación los resultados de los comandos "show run-config" y "show sysinfo". El switch es un TP-LINK modelo TL-S1005D, sin necesidad de configuración.
    Antes de mostrar los resultados de los comandos, he visto el siguiente mensaje en el log del AP:
    *Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
    version 6.0.199.4  ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC? 
    Un saludo
    Antonio R.
    (Cisco Controller) >show run-config
    Press Enter to continue...
    System Inventory
    NAME: "Chassis"    , DESCR: "Cisco Wireless Controller"
    PID: AIR-CT5508-K9,  VID: V02,  SN: FCW1608L05X
    Burned-in MAC Address............................ C4:64:13:8F:93:40
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 25
    Press Enter to continue or to abort
    System Information
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 6.0.199.4
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console
    1.27
    Build Type....................................... DATA + WPS
    System Name...................................... CISCO-CAPWAP-CONTROLLER
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... 209.165.200.230
    Last Reset....................................... Power on reset
    System Up Time................................... 0 days 0 hrs 17 mins 45 secs
    System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
    Rome, Vienna
    Current Boot License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... ES  - Spain
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +36 C
    External Temperature............................. +23 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Disabled
    Number of WLANs.................................. 1
    3rd Party Access Point Support................... Disabled
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ C4:64:13:8F:93:40
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 25
    Press Enter to continue or to abort
    Switch Configuration
    802.3x Flow Control Mode......................... Disable
    FIPS prerequisite features....................... Disabled
    secret obfuscation............................... Enabled
    Network Information
    RF-Network Name............................. hosp
    Web Mode.................................... Disable
    Secure Web Mode............................. Enable
    Secure Web Mode Cipher-Option High.......... Disable
    Secure Web Mode Cipher-Option SSLv2......... Enable
    Secure Shell (ssh).......................... Enable
    Telnet...................................... Disable
    Ethernet Multicast Forwarding............... Disable
    Ethernet Broadcast Forwarding............... Disable
    AP Multicast/Broadcast Mode................. Unicast
    IGMP snooping............................... Disabled
    IGMP timeout................................ 60 seconds
    User Idle Timeout........................... 300 seconds
    ARP Idle Timeout............................ 300 seconds
    Cisco AP Default Master..................... Enabled
    AP Join Priority............................ Disable
    Mgmt Via Wireless Interface................. Disable
    Mgmt Via Dynamic Interface.................. Disable
    Bridge MAC filter Config.................... Enable
    Bridge Security Mode........................ EAP
    Mesh Full Sector DFS........................ Enable
    --More or (q)uit current module or to abort
    --More or (q)uit current module or to abort
    AP Fallback ................................ Enable
    Web Auth Redirect Ports .................... 80
    Fast SSID Change ........................... Disabled
    IP/MAC Addr Binding Check .................. Enabled
    Press Enter to continue or to abort
    Port Summary
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE    SFPType
    1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  N/A     1000BaseTX
    2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    3  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    4  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    5  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    6  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    7  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    8  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    Press Enter to continue or to abort
    AP Summary
    Number of APs.................................... 0
    Global AP User Name.............................. Not Configured
    Global AP Dot1x User Name........................ Not Configured
    AP Name             Slots  AP Model             Ethernet MAC       Location
         Port  Country  Priority
    Press Enter to continue or to abort
    Press Enter to continue or to abort
    AP Location
    Site Name........................................ default-group
    Site Description.................................
    WLAN ID          Interface          Network Admission Control
    1               management           Disabled
    AP Name             Slots  AP Model             Ethernet MAC       Location
         Port  Country  Priority  GroupName
    Press Enter to continue or to abort
    AP Config
    Press Enter to continue or to abort
    Press Enter to continue or to abort
    AP Airewave Director Configuration
    Press Enter to continue or to abort
    802.11a Configuration
    802.11a Network.................................. Disabled
    11nSupport....................................... Enabled
          802.11a Low Band........................... Enabled
          802.11a Mid Band........................... Enabled
          802.11a High Band.......................... Enabled
    802.11a Operational Rates
        802.11a 6M Rate.............................. Mandatory
        802.11a 9M Rate.............................. Supported
        802.11a 12M Rate............................. Mandatory
        802.11a 18M Rate............................. Supported
        802.11a 24M Rate............................. Mandatory
        802.11a 36M Rate............................. Supported
        802.11a 48M Rate............................. Supported
        802.11a 54M Rate............................. Supported
    802.11n MCS Settings:
        MCS 0........................................ Supported
        MCS 1........................................ Supported
        MCS 2........................................ Supported
        MCS 3........................................ Supported
        MCS 4........................................ Supported
        MCS 5........................................ Supported
        MCS 6........................................ Supported
    --More or (q)uit current module or to abort
    --More or (q)uit current module or to abort
        MCS 7........................................ Supported
        MCS 8........................................ Supported
        MCS 9........................................ Supported
        MCS 10....................................... Supported
        MCS 11....................................... Supported
        MCS 12....................................... Supported
        MCS 13....................................... Supported
        MCS 14....................................... Supported
        MCS 15....................................... Supported
    802.11n Status:
        A-MPDU Tx:
            Priority 0............................... Enabled
            Priority 1............................... Disabled
            Priority 2............................... Disabled
            Priority 3............................... Disabled
            Priority 4............................... Disabled
            Priority 5............................... Disabled
            Priority 6............................... Disabled
            Priority 7............................... Disabled
    Beacon Interval.................................. 100
    CF Pollable mandatory............................ Disabled
    CF Poll Request mandatory........................ Disabled
    CFP Period....................................... 4
    --More or (q)uit current module or to abort
    --More or (q)uit current module or to abort
    CFP Maximum Duration............................. 60
    Default Channel.................................. 36
    Default Tx Power Level........................... 0
    DTPC  Status..................................... Enabled
    Fragmentation Threshold.......................... 2346
    TI Threshold..................................... -50
    Legacy Tx Beamforming setting.................... Disabled
    Traffic Stream Metrics Status.................... Disabled
    Expedited BW Request Status...................... Disabled
    World Mode....................................... Enabled
    EDCA profile type................................ default-wmm
    Voice MAC optimization status.................... Disabled
    Call Admision Control (CAC) configuration
    Voice AC:
       Voice AC - Admission control (ACM)............ Disabled
       Voice max RF bandwidth........................ 75
       Voice reserved roaming bandwidth.............. 6
       Voice load-based CAC mode..................... Disabled
       Voice tspec inactivity timeout................ Disabled
       Voice Stream-Size............................. 84000
       Voice Max-Streams............................. 2
    Video AC:
       Video AC - Admission control (ACM)............ Disabled
    --More or (q)uit current module or to abort
    --More or (q)uit current module or to abort
       Video max RF bandwidth........................ Infinite
       Video reserved roaming bandwidth.............. 0
    Press Enter to continue or to abort
    802.11a Advanced Configuration
    Press Enter to continue or to abort
    802.11a Airewave Director Configuration
    RF Event and Performance Logging
      Channel Update Logging......................... Off
      Coverage Profile Logging....................... Off
      Foreign Profile Logging........................ Off
      Load Profile Logging........................... Off
      Noise Profile Logging.......................... Off
      Performance Profile Logging.................... Off
      TxPower Update Logging......................... Off
    Default 802.11a AP performance profiles
      802.11a Global Interference threshold.......... 10 %
      802.11a Global noise threshold................. -70 dBm
      802.11a Global RF utilization threshold........ 80 %
      802.11a Global throughput threshold............ 1000000 bps
      802.11a Global clients threshold............... 12 clients
    Default 802.11a AP monitoring
      802.11a Monitor Mode........................... enable
      802.11a Monitor Mode for Mesh AP Backhaul...... disable
      802.11a Monitor Channels....................... Country channels
      802.11a AP Coverage Interval................... 180 seconds
      802.11a AP Load Interval....................... 60 seconds
      802.11a AP Noise Interval...................... 180 seconds
    --More or (q)uit current module or to abort
    --More or (q)uit current module or to abort
      802.11a AP Signal Strength Interval............ 60 seconds
    Automatic Transmit Power Assignment
      Transmit Power Assignment Mode................. AUTO
      Transmit Power Update Interval................. 600 seconds
      Transmit Power Threshold....................... -70 dBm
      Transmit Power Neighbor Count.................. 3 APs
      Min Transmit Power............................. -10 dBm
      Max Transmit Power............................. 30 dBm
      Transmit Power Update Contribution............. SNI.
      Transmit Power Assignment Leader............... c4:64:13:8f:93:40
      Last Run....................................... 75 seconds ago
    Coverage Hole Detection
      802.11a Coverage Hole Detection Mode........... Enabled
      802.11a Coverage Voice Packet Count............ 100 packets
      802.11a Coverage Voice Packet Percentage....... 50%
      802.11a Coverage Voice RSSI Threshold.......... -80 dBm
      802.11a Coverage Data Packet Count............. 50 packets
      802.11a Coverage Data Packet Percentage........ 50%
      802.11a Coverage Data RSSI Threshold........... -80 dBm
      802.11a Global coverage exception level........ 25 %
      802.11a Global client minimum exception lev.... 3 clients
    Automatic Channel Assignment
      Channel Assignment Mode........................ AUTO
    --More or (q)uit current module or to abort
      Channel Update Interval........................ 600 seconds [startup]
      Anchor time (Hour of the day).................. 0
      Channel Update Contribution.................... SNI.
      Channel Assignment Leader...................... c4:64:13:8f:93:40
      Last Run....................................... 75 seconds ago
      DCA Sensitivity Level.......................... STARTUP (5 dB)
      DCA 802.11n Channel Width...................... 20 MHz
      DCA Minimum Energy Limit....................... -95 dBm
      Channel Energy Levels
        Minimum...................................... unknown
        Average...................................... unknown
        Maximum...................................... unknown
      Channel Dwell Times
        Minimum...................................... unknown
        Average...................................... unknown
        Maximum...................................... unknown
      802.11a 5 GHz Auto-RF Channel List
        Allowed Channel List......................... 36,40,44,48,52,56,60,64
        Unused Channel List.......................... 100,104,108,112,116,120,124,
                                                      128,132,136,140
      DCA Outdoor AP option.......................... Disabled
    Radio RF Grouping
      802.11a Group Mode............................. AUTO
    --More or (q)uit current module or to abort
      802.11a Group Update Interval.................. 600 seconds
      802.11a Group Leader........................... c4:64:13:8f:93:40
        802.11a Group Member......................... c4:64:13:8f:93:40
      802.11a Last Run............................... 75 seconds ago
    802.11b Configuration
    802.11b Network.................................. Enabled
    11gSupport....................................... Enabled
    11nSupport....................................... Enabled
    802.11b/g Operational Rates
        802.11b/g 1M Rate............................ Mandatory
        802.11b/g 2M Rate............................ Mandatory
        802.11b/g 5.5M Rate.......................... Mandatory
        802.11b/g 11M Rate........................... Mandatory
        802.11g 6M Rate.............................. Supported
        802.11g 9M Rate.............................. Supported
        802.11g 12M Rate............................. Supported
        802.11g 18M Rate............................. Supported
        802.11g 24M Rate............................. Supported
        802.11g 36M Rate............................. Supported
        802.11g 48M Rate............................. Supported
        802.11g 54M Rate............................. Supported
    802.11n MCS Settings:
        MCS 0........................................ Supported
        MCS 1........................................ Supported
        MCS 2........................................ Supported
        MCS 3........................................ Supported
        MCS 4........................................ Supported
    --More or (q)uit current module or to abort
        MCS 5........................................ Supported
        MCS 6........................................ Supported
        MCS 7........................................ Supported
        MCS 8........................................ Supported
        MCS 9........................................ Supported
        MCS 10....................................... Supported
        MCS 11....................................... Supported
        MCS 12....................................... Supported
        MCS 13....................................... Supported
        MCS 14....................................... Supported
        MCS 15....................................... Supported
    802.11n Status:
        A-MPDU Tx:
            Priority 0............................... Enabled
            Priority 1............................... Disabled
            Priority 2............................... Disabled
            Priority 3............................... Disabled
            Priority 4............................... Disabled
            Priority 5............................... Disabled
            Priority 6............................... Disabled
            Priority 7............................... Disabled
    Beacon Interval.................................. 100
    CF Pollable mode................................. Disabled
    --More or (q)uit current module or to abort
    CF Poll Request mandatory........................ Disabled
    CFP Period....................................... 4
    CFP Maximum Duration............................. 60
    Default Channel.................................. 1
    Default Tx Power Level........................... 0
    DTPC  Status..................................... Enabled
    Call Admission Limit  ........................... 105
    G711 CU Quantum ................................. 15
    ED Threshold..................................... -50
    Fragmentation Threshold.......................... 2346
    PBCC mandatory................................... Disabled
    RTS Threshold.................................... 2347
    Short Preamble mandatory......................... Enabled
    Short Retry Limit................................ 7
    Legacy Tx Beamforming setting.................... Enabled
    Traffic Stream Metrics Status.................... Disabled
    Expedited BW Request Status...................... Disabled
    World Mode....................................... Enabled
    Faster Carrier Tracking Loop..................... Disabled
    EDCA profile type................................ default-wmm
    Voice MAC optimization status.................... Disabled
    Call Admision Control (CAC) configuration
       Voice AC - Admission control (ACM)............ Disabled
    --More or (q)uit current module or to abort
       Voice Stream-Size............................. 84000
       Voice Max-Streams............................. 2
       Voice max RF bandwidth........................ 75
       Voice reserved roaming bandwidth.............. 6
       Voice load-based CAC mode..................... Disabled
       Voice tspec inactivity timeout................ Disabled
       Video AC - Admission control (ACM)............ Disabled
       Video max RF bandwidth........................ 50
       Video reserved roaming bandwidth.............. 0
    802.11b Advanced Configuration
    Press Enter to continue or to abort
    802.11b Airewave Director Configuration
    RF Event and Performance Logging
      Channel Update Logging......................... Off
      Coverage Profile Logging....................... Off
      Foreign Profile Logging........................ Off
      Load Profile Logging........................... Off
      Noise Profile Logging.......................... Off
      Performance Profile Logging.................... Off
      Transmit Power Update Logging.................. Off
    Default 802.11b AP performance profiles
      802.11b Global Interference threshold.......... 10 %
      802.11b Global noise threshold................. -70 dBm
      802.11b Global RF utilization threshold........ 80 %
      802.11b Global throughput threshold............ 1000000 bps
      802.11b Global clients threshold............... 12 clients
    Default 802.11b AP monitoring
      802.11b Monitor Mode........................... enable
      802.11b Monitor Channels....................... Country channels
      802.11b AP Coverage Interval................... 180 seconds
      802.11b AP Load Interval....................... 60 seconds
      802.11b AP Noise Interval...................... 180 seconds
      802.11b AP Signal Strength Interval............ 60 seconds
    Automatic Transmit Power Assignment
      Transmit Power Assignment Mode................. AUTO
      Transmit Power Update Interval................. 600 seconds
      Transmit Power Threshold....................... -70 dBm
      Transmit Power Neighbor Count.................. 3 APs
      Min Transmit Power............................. -10 dBm
      Max Transmit Power............................. 30 dBm
      Transmit Power Update Contribution............. SNI.
      Transmit Power Assignment Leader............... c4:64:13:8f:93:40
      Last Run....................................... 213 seconds ago
    Coverage Hole Detection
      802.11b Coverage Hole Detection Mode........... Enabled
      802.11b Coverage Voice Packet Count............ 100 packets
      802.11b Coverage Voice Packet Percentage....... 50%
      802.11b Coverage Voice RSSI Threshold.......... -80 dBm
      802.11b Coverage Data Packet Count............. 50 packets
      802.11b Coverage Data Packet Percentage........ 50%
      802.11b Coverage Data RSSI Threshold........... -80 dBm
      802.11b Global coverage exception level........ 25 %
      802.11b Global client minimum exception lev.... 3 clients
    Automatic Channel Assignment
      Channel Assignment Mode........................ AUTO
      Channel Update Interval........................ 600 seconds [startup]
      Anchor time (Hour of the day).................. 0
      Channel Update Contribution.................... SNI.
      Channel Assignment Leader...................... c4:64:13:8f:93:40
      Last Run....................................... 213 seconds ago
      DCA Sensitivity Level: ...................... STARTUP (5 dB)
      DCA Minimum Energy Limit....................... -95 dBm
      Channel Energy Levels
        Minimum...................................... unknown
        Average...................................... unknown
        Maximum...................................... unknown
      Channel Dwell Times
        Minimum...................................... unknown
        Average...................................... unknown
        Maximum...................................... unknown
      802.11b Auto-RF Allowed Channel List........... 1,6,11
      Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10,12,13
    Radio RF Grouping
      802.11b Group Mode............................. AUTO
      802.11b Group Update Interval.................. 600 seconds
      802.11b Group Leader........................... c4:64:13:8f:93:40
        802.11b Group Member......................... c4:64:13:8f:93:40
      802.11b Last Run............................... 213 seconds ago
    Mobility Configuration
    Symmetric Mobility Tunneling (current) .......... Enabled
    Symmetric Mobility Tunneling (after reboot) ..... Enabled
    Mobility Protocol Port........................... 16666
    Default Mobility Domain.......................... hosp
    Multicast Mode .................................. Disabled
    Mobility Domain ID for 802.11r................... 0x97e2
    Mobility Keepalive Interval...................... 10
    Mobility Keepalive Count......................... 3
    Mobility Group Members Configured................ 1
    Mobility Control Message DSCP Value.............. 0
    Controllers configured in the Mobility Group
    MAC Address        IP Address       Group Name                        Multicast
    IP     Status
    c4:64:13:8f:93:40  209.165.200.230  hosp                              0.0.0.0
            Up
    Advanced Configuration
    Probe request filtering..........................  Enabled
    Probes fwd to controller per client per radio....  0
    Probe request rate-limiting interval.............  500 msec
    EAP-Identity-Request Timeout (seconds)........... 30
    EAP-Identity-Request Max Retries................. 2
    EAP Key-Index for Dynamic WEP.................... 0
    EAP Max-Login Ignore Identity Response........... enable
    EAP-Request Timeout (seconds).................... 30
    EAP-Request Max Retries.......................... 2
    EAPOL-Key Timeout (milliseconds)................. 1000
    EAPOL-Key Max Retries............................ 2
    dot11-padding.................................... Disabled
    Authentication Response Timeout (seconds)........ 10
    Rogue Entry Timeout (seconds).................... 1200
    AP Heart Beat Timeout (seconds).................. 30
    AP Discovery Timeout (seconds)................... 10
    AP Local mode Fast Heartbeat (seconds)........... disable
    AP Hreap mode Fast Heartbeat (seconds)........... disable
    AP Primary Discovery Timeout (seconds)........... 120
    AP Primed Join Timeout (seconds)................. 0
    Packet Forwarding watchdog timer (seconds)....... 240 (enable)
    Location Configuration
    RFID Tag data Collection......................... Enabled
    RFID  timeout.................................... 1200 seconds
    RFID mobility.................................... Oui:00:14:7e : Vendor:pango  S
    tate:Disabled
    Interface Configuration
    Interface Name................................... management
    MAC Address...................................... c4:64:13:8f:93:40
    IP Address....................................... 209.165.200.230
    IP Netmask....................................... 255.255.255.0
    IP Gateway....................................... 209.165.200.1
    External NAT IP State............................ Disabled
    External NAT IP Address.......................... 192.168.1.1
    VLAN............................................. untagged
    Quarantine-vlan.................................. 0
    Active Physical Port............................. 1
    Primary Physical Port............................ 1
    Backup Physical Port............................. Unconfigured
    Primary DHCP Server.............................. 209.165.200.230
    Secondary DHCP Server............................ Unconfigured
    DHCP Option 82................................... Disabled
    ACL.............................................. Unconfigured
    AP Manager....................................... Yes
    Guest Interface.................................. No
    Interface Name................................... service-port
    MAC Address...................................... c4:64:13:8f:93:41
    IP Address....................................... 192.168.1.157
    IP Netmask....................................... 255.255.255.0
    DHCP Option 82................................... Disabled
    DHCP Protocol.................................... Disabled
    AP Manager....................................... No
    Guest Interface.................................. No
    Interface Name................................... virtual
    MAC Address...................................... c4:64:13:8f:93:40
    IP Address....................................... 1.1.1.1
    DHCP Option 82................................... Disabled
    Virtual DNS Host Name............................ Disabled
    AP Manager....................................... No
    Guest Interface.................................. No
    WLAN Configuration
    WLAN Identifier.................................. 1
    Profile Name..................................... HOSP3C
    Network Name (SSID).............................. HOSP3C
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      NAC-State...................................... Disabled
      Quarantine VLAN................................ 0
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    WLAN ACL......................................... unconfigured
    DHCP Server...................................... 209.165.200.230
    DHCP Address Assignment Required................. Enabled
    Quality of Service............................... Platinum (voice)
    Scan Defer Priority.............................. 5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    IPv6 Support..................................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... 802.11b and 802.11g only
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Disabled
       Accounting.................................... Disabled
       Dynamic Interface............................. Disabled
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Enabled
          Auth Key Management
             802.1x.................................. Disabled
             PSK..................................... Enabled
             CCKM.................................... Disabled
             FT(802.11r)............................. Disabled
             FT-PSK(802.11r)......................... Disabled
    FT Reassociation Timeout......................... 20
    FT Over-The-Air mode............................. Enabled
    FT Over-The-Ds mode.............................. Enabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       H-REAP Local Switching........................ Disabled
       H-REAP Learn IP Address....................... Enabled
       Infrastructure MFP protection................. Enabled
       Client MFP.................................... Optional
       Tkip MIC Countermeasure Hold-down Timer....... 60
    Call Snooping.................................... Disabled
    Band Select...................................... Enabled
    Load Balancing................................... Enabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    Press Enter to continue or to abort
    Press Enter to continue or to abort
    ACL Configuration
    Press Enter to continue or to abort
    CPU ACL Configuration
    CPU Acl Name................................ NOT CONFIGURED
    Wireless Traffic............................ Disabled
    Wired Traffic............................... Disabled
    RADIUS Configuration
    Vendor Id Backward Compatibility................. Disabled
    Call Station Id Case............................. lower
    Call Station Id Type............................. IP Address
    Aggressive Failover.............................. Enabled
    Keywrap.......................................... Disabled
    Fallback Test:
        Test Mode.................................... Off
        Probe User Name.............................. cisco-probe
        Interval (in seconds)........................ 300
    MAC Delimiter for Authentication Messages........ hyphen
    MAC Delimiter for Accounting Messages............ hyphen
    Authentication Servers
    Idx  Type  Server Address    Port    State     Tout  RFC3576  IPSec - AuthMode/P
    hase1/Group/Lifetime/Auth/Encr
    Accounting Servers
    Idx  Type  Server Address    Port    State     Tout  RFC3576  IPSec - AuthMode/P
    hase1/Group/Lifetime/Auth/Encr
    --More or (q)uit current module or to abort
    TACACS Configuration
    Authentication Servers
    Idx  Server Address    Port    State     Tout
    Authorization Servers
    Idx  Server Address    Port    State     Tout
    Accounting Servers
    Idx  Server Address    Port    State     Tout
    LDAP Configuration
    Press Enter to continue or to abort
    Local EAP Configuration
    User credentials database search order:
        Primary ..................................... Local DB
    Timer:
        Active timeout .............................. 300
    Configured EAP profiles:
    EAP Method configuration:
        EAP-FAST:
          Server key ................................
          TTL for the PAC ........................... 10
          Anonymous provision allowed ............... Yes
          Authority ID .............................. 436973636f00000000000000000000
    00
          Authority Information ..................... Cisco A-ID
    Press Enter to continue or to abort
    HREAP Group Summary
    HREAP Group Summary: Count: 0
    Group Name                # Aps
    Press Enter to continue or to abort
    HREAP Group Detail
    Press Enter to continue or to abort
    Route  Info
    Number of Routes................................. 0
    Destination Network          Netmask               Gateway
    Press Enter to continue or to abort
    Qos Queue Length Info
    Platinum queue length............................ 100
    Gold queue length................................  75
    Silver queue length..............................  50
    Bronze queue length..............................  25
    Press Enter to continue or to abort
    Mac Filter Info
    Press Enter to continue or to abort
    Authorization List
    Authorize MIC APs against AAA ................... disabled
    Authorize LSC APs against Auth-List ............. disabled
    Allow APs with MIC - Manufactured Installed C.... disabled
    Allow APs with SSC - Self-Signed Certificate..... disabled
    Allow APs with LSC - Locally Significant Cert.... disabled
    Load Balancing Info
    Aggressive Load Balancing........................ Disabled
    Aggressive Load Balancing Window................. 5 clients
    Aggressive Load Balancing Denial Count........... 3
    Statistics
    Total Denied Count............................... 0 clients
    Total Denial Sent................................ 0 messages
    Exceeded Denial Max Limit Count.................. 0 times
    None 5G Candidate Count.......................... 0 times
    None 2.4G Candidate Count........................ 0 times
    Press Enter to continue or to abort
    Dhcp Scope Info
    Scope: PUNTOSAP
    Enabled.......................................... Yes
    Lease Time....................................... 86400 (1 day )
    Pool Start....................................... 209.165.200.201
    Pool End......................................... 209.165.200.229
    Network.......................................... 209.165.200.0
    Netmask.......................................... 255.255.255.0
    Default Routers.................................. 0.0.0.0  0.0.0.0  0.0.0.0
    DNS Domain.......................................
    DNS.............................................. 0.0.0.0  0.0.0.0  0.0.0.0
    Netbios Name Servers............................. 0.0.0.0  0.0.0.0  0.0.0.0
    Press Enter to continue or to abort
    Exclusion List ConfigurationUnable to retrieve exclusion-list entry
    Press Enter to continue or to abort
    CDP Configuration
    Press Enter to continue or to abort
    Country Channels Configuration
    Configured Country............................. ES  - Spain
          KEY: * = Channel is legal in this country and may be configured manually.
               A = Channel is the Auto-RF default in this country.
               . = Channel is not legal in this country.
               C = Channel has been configured for use by Auto-RF.
               x = Channel is available to be configured for use by Auto-RF.
             (-,-) = (indoor, outdoor) regulatory doamin allowed by this country.
    -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
        802.11bg     :
        Channels     :                   1 1 1 1 1
                     : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
    -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
    ES (-E   ,-E   ): A * * * * A * * * * A * * .
    -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
        802.11a      :                         1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
        Channels     : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
                     : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
    -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
    ES (-E   ,-E   ): . A . A . A . A A A A A * * * * * * * * * * * . . . . .
    Press Enter to continue or to abort
    WPS Configuration Summary
    Auto-Immune
      Auto-Immune.................................... Disabled
    Client Exclusion Policy
      Excessive 802.11-association failures.......... Enabled
      Excessive 802.11-authentication failures....... Enabled
      Excessive 802.1x-authentication................ Enabled
      IP-theft....................................... Enabled
      Excessive Web authentication failure........... Enabled
    Signature Policy
      Signature Processing........................... Enabled
    Press Enter to continue or to abort
    Custom Web Configuration
    Radius Authentication Method..................... PAP
    Cisco Logo....................................... Enabled
    CustomLogo....................................... None
    Custom Title..................................... None
    Custom Message................................... None
    Custom Redirect URL.............................. None
    Web Authentication Type.......................... Internal Default
    External Web Authentication URL.................. None
    Configuration Per Profile:
    Rogue AP Configuration
    Rogue Location Discovery Protocol................ Disabled
    Rogue on wire Auto-Contain....................... Disabled
    Rogue using our SSID Auto-Contain................ Disabled
    Valid client on rogue AP Auto-Contain............ Disabled
    Rogue AP timeout................................. 1200
    MAC Address        Classification     # APs # Clients Last Heard
    Adhoc Rogue Configuration
    Detect and report Ad-Hoc Networks................ Enabled
    Auto-Contain Ad-Hoc Networks..................... Disabled
    Client MAC Address  Adhoc BSSID         State              # APs   Last Heard
    Rogue Client Configuration
    Validate rogue clients against AAA............... Disabled
    Rogue Client Configuration
    Validate rogue clients against AAA............... Disabled
    --More-- or (q)uit
    MAC Address        State              # APs Last Heard
    Ignore List Configuration
    MAC Address
    Rogue Rule Configuration
    Priority Rule Name               State    Type          Match Hit Count
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 6.0.199.4
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console
    1.27
    Build Type....................................... DATA + WPS
    System Name...................................... CISCO-CAPWAP-CONTROLLER
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... 209.165.200.230
    Last Reset....................................... Power on reset
    System Up Time................................... 0 days 0 hrs 41 mins 2 secs
    System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
    Rome, Vienna
    Current Boot License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... ES  - Spain
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +39 C
    External Temperature............................. +23 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Disabled
    Number of WLANs.................................. 1
    3rd Party Access Point Support................... Disabled
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ C4:64:13:8F:93:40
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 25
    (Cisco Controller) >
    The AP log
    AP442b.03dc.0925>
    *Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Selected MWAR 'CISCO-CAPWAP-CONTROLLER
    '(index 0).
    *Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    *Apr 19 23:10:19.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
    p: 209.165.200.230 peer_port: 5246
    *Apr 19 23:10:19.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Apr 19 23:10:20.200: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
    peer_ip: 209.165.200.230 peer_port: 5246
    *Apr 19 23:10:20.201: %CAPWAP-5-SENDJOIN: sending Join Request to 209.165.200.23
    0
    *Apr 19 23:10:20.201: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
    version 6.0.199.4  ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
    *Apr 19 23:10:20.354: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *Apr 19 23:10:20.355: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 209
    .165.200.230:5246
    *Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 19 23:10:20.412: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
    not established

  • Cisco Jabber for Windows unable to make calls in softphone mode

    Hi,
    I am facing an issue when I make a call from jabber in softphone mode to another jabber client my call fails and using wireshark traces I see SIP2.0 503 Service Unavailable.
    I have followed the guide and was able to deploy it once before successfully. This is a lab environment and we don't have any CSS or partitions.
    If someone can please guide me :)
    Regards
    Hassan

    Hi Hassan,
    I found four calls in the trace file with the same calling/called numbers. I analyzed one of them.
    Calling party - 42001
    Called party - 42002
    00267676.002 |17:15:14.335 |AppInfo  |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 122.129.75.131 on port 23600 index 689 with 2610 bytes:
    [7525,NET]
    INVITE sip:[email protected];user=phone SIP/2.0
    Via: SIP/2.0/TCP 192.168.1.60:54441;branch=z9hG4bK00005d94
    From: "42001" <sip:[email protected]>;tag=3c77e6734e8e00180000789e-000014f2
    To: <sip:[email protected]>
    Call-ID: [email protected]
    Max-Forwards: 70
    Date: Tue, 21 Apr 2015 11:29:56 GMT
    CSeq: 101 INVITE
    User-Agent: Cisco-CSF
    Contact: <sip:[email protected]:54441;transport=tcp>;video;bfcp
    Expires: 180
    Accept: application/sdp
    Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE,INFO
    Remote-Party-ID: "42001" <sip:[email protected]>;party=calling;id-type=subscriber;privacy=off;screen=yes
    Supported: replaces,join,sdp-anat,norefersub,resource-priority,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-7.0.0,X-cisco-xsi-8.5.1
    Allow-Events: kpml,dialog
    Recv-Info: conference
    Recv-Info: x-cisco-conference
    Content-Length: 1469
    Content-Type: application/sdp
    Content-Disposition: session;handling=optional
    v=0
    o=Cisco-SIPUA 5552 0 IN IP4 192.168.1.60
    s=SIP Call
    b=AS:4000
    t=0 0
    m=audio 21996 RTP/AVP 9 104 105 0 8 18 101
    c=IN IP4 192.168.1.60
    a=rtpmap:9 G722/8000
    a=rtpmap:104 G7221/16000
    a=fmtp:104 bitrate=32000
    a=rtpmap:105 G7221/16000
    a=fmtp:105 bitrate=24000
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=sendrecv
    m=video 25898 RTP/AVP 126 97
    c=IN IP4 192.168.1.60
    b=TIAS:4000000
    a=rtpmap:126 H264/90000
    a=fmtp:126 profile-level-id=42E01F;packetization-mode=1;level-asymmetry-allowed=1;max-fs=3601;max-rcmd-nalu-size=32000
    a=imageattr:126 recv [x=[32:1:1280],y=[18:1:720],par=1.7778,q=1.00]
    a=content:main
    a=label:11
    a=rtpmap:97 H264/90000
    a=fmtp:97 profile-level-id=42E01F;packetization-mode=0;level-asymmetry-allowed=1;max-fs=3601
    a=imageattr:97 recv [x=[32:1:1280],y=[18:1:720],par=1.7778,q=1.00]
    a=sendrecv
    m=video 32652 RTP/AVP 126 97
    c=IN IP4 192.168.1.60
    b=TIAS:4000000
    a=rtpmap:126 H264/90000
    a=fmtp:126 profile-level-id=42E01F;packetization-mode=1;level-asymmetry-allowed=1;max-fs=4099;max-rcmd-nalu-size=32000
    a=content:slides
    a=label:12
    a=rtpmap:97 H264/90000
    a=fmtp:97 profile-level-id=42E01F;packetization-mode=0;level-asymmetry-allowed=1;max-fs=4099
    a=sendrecv
    m=application 5070 UDP/BFCP *
    c=IN IP4 192.168.1.60
    a=floorctrl:c-s
    a=confid:4
    a=floorid:2 mstrm:12
    a=userid:4
    a=setup:actpass
    a=connection:new
    a=sendrecv
    00267702.007 |17:15:14.342 |AppInfo  |Digit analysis: match(pi="2", fqcn="42001", cn="42001",plv="5", pss="", TodFilteredPss="", dd="42002",dac="0")
    00267702.008 |17:15:14.342 |AppInfo  |Digit analysis: analysis results
    00267702.009 |17:15:14.342 |AppInfo  ||PretransformCallingPartyNumber=42001
    |CallingPartyNumber=42001
    |DialingPartition=
    |DialingPattern=42002
    00267709.001 |17:15:14.343 |AppInfo  |LBMIF: CI: 30582939 ASSOC    30582940
    00267709.002 |17:15:14.343 |AppInfo  |LBMIF: CI: 30582940 ASSOC'   30582939
    00267715.000 |17:15:14.343 |SdlSig   |CcSetupReq                             |restart0                       |LineControl(1,100,174,27)        |Cdcc(1,100,219,42)               |1,100,14,10382.36^122.129.75.131^CSFHASSANRAZI |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] CI=30582940 CI.branch=0  sBPL.plid=65 sBPL.l=1 sBPL.pl=5 sBPL.msd=0  FDataType=0opId=0ssType=0 SsKey=0invokeId=0resultExp=Fbpda=F pi.piid=30 pi.l=0 pi2.piid=30 pi2.l=0 pi3.piid=30 pi3.l=0 FQCGPN=ti=1nd=42001pi=0si1 preXCgpn=tn=0npi=0ti=1nd=42001pi=0si1 cgPart= cgPat=42001 cgpn=tn=0npi=0ti=1nd=42001pi=1si1 cgpnVM= unXCgpn=tn=0npi=0ti=1nd=42001pi=1si1 cName=locale: 1 Name:  UnicodeName:  pi: 1 DD=tn=0npi=1ti=1nd=42002User=42002Host=192.168.201.101Port=5060PassWord=Madder=Transport=4mDisplayName=RawUrl=sip:[email protected];user=phoneOrigPort=0pi=0si1 origDD=tn=0npi=1ti=1nd=42002User=42002Host=192.168.201.101Port=5060PassWord=Madder=Transport=4mDisplayName=RawUrl=sip:[email protected];user=phoneOrigPort=0pi=0si1 preXCdpn=tn=0npi=0ti=1nd=42002pi=0si0 preXTagsList=SUBSCRIBER preXPosMatchList=42002 cdPart= cdPat=42002 cdpn=tn=0npi=0ti=1nd=42002pi=1si1 cdpnVMbox= localPatternUsage=2 connectedPatternUsage=2 itrPart= itrPat= LRPart= LRPat=42002 LR=tn=0npi=0ti=1nd=42002pi=0si1 LRVM= LRName=locale: 1 Name:  UnicodeName:  pi: 0 FQOCpdn=ti=1nd=42002pi=0si1 fFQLRNum=ti=1nd=42002pi=0si1 oPart= oPat=42002 oCpdn=tn=0npi=0ti=1nd=42002pi=0si1 oCdpnVM= oRFR=0 oName=locale: 1 Name:  UnicodeName:  pi: 0 ts=SUBSCRIBER posMatches=42002 withTags= withValues= rdn.l=0IpAddrMode=0 ipAddrType=0 ipv4=122.129.75.131:23600 region=Default capCount=7 ctiActive=F ctiFarEndDev=1 ctiCCMId=1 cgPtyDev=CSFHASSANRAZI callInst=0 confCallInst=0 OLF=1Supp DTMF=3DTMF Cfg=1DTMF Payload=101isOffNetDev=F bc.l=4 bc.itr=8 bc.itc=8 bc.trm=6 bc.tm=16 maxForwards=69 cgpnMaskedByRedirect=F callingDP=1b1b9eb6-7803-11d3-bdf0-00108302ead1 featCallType=0 callingUserId= UnicodeName:  muteEnabled=0 associatedCallCI=0 featurePriority=1 nonTargetPolicy=0 unconsumedDigits= suppressMOH=F numPlanPkid =6807b55c-7ab5-4f8d-8fba-db383ecfaaa4 networkDomain= bitMask=0 SetupReason=0 routeClass=1 sideACmDeviceType=4 protected=1 ControlProcessType=0 tokens=0 isPresent=F transitCount=0 geolocInfo={geolocPkid=, filterPkid=, geolocVal=, devType=4} locPkid=29c5c1c4-8871-4d1e-8394-0b9181e8c54d locName=Hub_None deductBW=F fateShareId=StandAloneCluster:30582939 videoTrafficClass=Desktop oFromAnalogDvc=F bridgeParticipantID= callingUsr= remoteClusterID= isEMCCDevice=F lHPMemCEPN= cHPMemCEPN= uri=ti=1User=Host=Port=0PassWord=Madder=Transport=4mDisplayName=RawUrl=<sip:[email protected]:54441;transport=tcp>OrigPort=0pi=0si1 param=;video;bfcp M=Unknown ;rc=26624 Hdrs= CanSupportSIPTandN=true TransId=0 AllowBitMask=0x7bf UserAgentOrServer=Cisco-CSF OrigDDName=locale: 1 Name:  UnicodeName:  pi: 0 mCallerId= mCallerName=LatentCaps=null icidVal= icidGenAddr= oioi= tioi= ptParams= receivedPAID= routeHdr= routeCepn= requestURI= PCVFlag=F originallyHadISUP=F isIMSFinalRoute=F IMSMode=0 SideABibEnabled= 0 isCgpnNonPreemptable=F isCdpnNonPreemptable=F origDP=1b1b9eb6-7803-11d3-bdf0-00108302ead1 lastRedirectingDP=1b1b9eb6-7803-11d3-bdf0-00108302ead1 originalLRG= lastRedirectingLRG= nwLoc=0 rstr= FarEndDeviceName=CSFHASSANRAZI hdrMOH=0 CAL={v=ffffffff, m=ffffffff, tDev=F, res=F, devType=0}
    00267715.001 |17:15:14.343 |AppInfo  |LineControl(27) - 0 calls, 0 CiReq, busyTrigger=2, maxCall=6
    00267715.002 |17:15:14.343 |Created  |                                       |                               |LineCdpc(1,100,175,74)           |LineControl(1,100,174,27)        |                                         |NumOfCurrentInstances: 2
    00267758.001 |17:15:19.364 |AppInfo  |//SIP/Stack/Info/0x0/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 (SIP_NETWORK_MSG), for event 55 (SIPSPI_EV_SEND_FAILURE_MSG)
    00267758.002 |17:15:19.364 |AppInfo  |//SIP/Stack/Info/0x0xe5136ad8/ccsip_spi_process_event: Send Error for event(0xe5139420)
    00267758.003 |17:15:19.364 |AppInfo  |//SIP/Stack/Error/0x0/act_idle_send_msg_failure: Send Error to 192.168.1.172:54901 for transport TCP
    00267758.004 |17:15:19.364 |AppInfo  |//SIP/Stack/Info/0x0xe5136ad8/ccsip_set_cc_cause_for_spi_err: Categorized cause:38, category:186
    00267758.005 |17:15:19.364 |AppInfo  |//SIP/Stack/Info/0x0xe5136ad8/sipSPIInitiateDisconnect: Initiate call disconnect(38) for outgoing call
    00267758.006 |17:15:19.364 |AppInfo  |//SIP/SIPHandler/ccbId=4212/scbId=0/ccsip_api_call_disconnected: ccb->cc_disc_cause (38); ccb->sip_disc_cause(503)
    00267794.001 |17:15:19.367 |AppInfo  |SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 122.129.75.131 on port 23600 index 689
    [7527,NET]
    SIP/2.0 503 Service Unavailable
    Via: SIP/2.0/TCP 192.168.1.60:54441;branch=z9hG4bK00005d94;received=122.129.75.131
    From: "42001" <sip:[email protected]>;tag=3c77e6734e8e00180000789e-000014f2
    To: <sip:[email protected]>;tag=4211~132b515c-f941-ca80-8023-9423185ada2d-30582939
    Date: Tue, 21 Apr 2015 12:15:14 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow-Events: presence
    Server: Cisco-CUCM10.5
    Reason: Q.850; cause=41
    Content-Length: 0
    Seems like a network issue. TCP connection can't be established with the called jabber client, which as per the trace is 192.168.1.172.
    Check for firewalls blocking the connection.
    You may take a pcap on the called jabber client side or probably from the call manager, and check for TCP issues.
    You mentioned the jabber client's IP as 192.168.1.60 but I see incoming invite from 122.129.75.131. What this IP?
    HTH,
    Atul

  • Cisco 7206 has with LLQ QOS and cpu 85 %

    hi all ,
    i want to mention issue about cisco router 7206 npeg2 :
    can this router handle traffic  780 Mbps  as download  and 75 MBps as upload ?? with cpu 85 % and with LLQ  qos ??
    im asking this question because my QOS althoug it matched alot of traffic , it some time get slow and seems that QOS not working fine , im sure that my work is  fine, because it was fine , but recent days i added more bw   ???!!!!!
    dont know if  need more memory for router for QOS :
    ===============================================================
    7200Gateway#sh memory
                    Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
    Processor    6B97A80   1883669308   114125456   1769543852   1768174580   1760364316
          I/O   78000000    67108864     4482572    62626292    62598896    62617884
    Transient   77000000    16777216       22196    16755020    16222412    16728368
              Processor memory
    Address      Bytes     Prev     Next Ref     PrevF    NextF Alloc PC  what
    06B97A80 0000010004 00000000 06B9A1C4 001  -------- -------- 01A493D8  CEF: fib
    06B9A1C4 0000000028 06B97A80 06B9A210 000  87F3D04  87FD620  015FC24C  AAA Attr Binary/String
    06B9A210 0000004700 06B9A1C4 06B9B49C 001  -------- -------- 01AC85B4  ADJ: adjacency
    06B9B49C 0000004100 06B9A210 06B9C4D0 001  -------- -------- 0011245C  HTTP CORE
    06B9C4D0 0000004100 06B9B49C 06B9D504 001  -------- -------- 00112548  HTTP CORE
    06B9D504 0000004100 06B9C4D0 06B9E538 001  -------- -------- 00112548  HTTP CORE
    06B9E538 0000004100 06B9D504 06B9F56C 001  -------- -------- 00112548  HTTP CORE
    06B9F56C 0000004100 06B9E538 06BA05A0 001  -------- -------- 00112548  HTTP CORE
    06BA05A0 0000000756 06B9F56C 06BA08C4 001  -------- -------- 0343C38C  Process
    06BA08C4 0000000204 06BA05A0 06BA09C0 001  -------- -------- 0343FAB4  Process Events
    06BA09C0 0000022764 06BA08C4 06BA62DC 001  -------- -------- 04055CB4  IPSM Octet Str
    06BA62DC 0000014488 06BA09C0 06BA9BA4 001  -------- -------- 0405C0C4  ipsm IPSEC Fai
    06BA9BA4 0000004100 06BA62DC 06BAABD8 001  -------- -------- 00112548  H
    ===========================================================================
    ==========================================
    7200Gateway#sh version
    Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4(24)T7, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Tue 28-Feb-12 12:53 by prod_rel_team
    ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
    7200Gateway uptime is 2 weeks, 5 days, 19 hours, 43 minutes
    System returned to ROM by power-on
    System image file is "disk2:/c7200p-adventerprisek9-mz.124-24.T7.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
    Processor board ID 13252317
    MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
    6 slot VXR midplane, Version 2.0
    Last reset from power-on
    PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
    Current configuration on bus mb1 has a total of 0 bandwidth points.
    This configuration is within the PCI bus capacity and is supported.
    PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
    Current configuration on bus mb2 has a total of 0 bandwidth points.
    This configuration is within the PCI bus capacity and is supported.
    Please refer to the following document "Cisco 7200 Series Port Adaptor
    Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
    for c7200 bandwidth points oversubscription and usage guidelines.
    1 FastEthernet interface
    3 Gigabit Ethernet interfaces
    2045K bytes of NVRAM.
    250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
    65536K bytes of Flash internal SIMM (Sector size 512K).
    Configuration register is 0x2102
    ==============================================================
    7200Gateway#sh processes cpu
    CPU utilization for five seconds: 85%/84%; one minute: 84%; five minutes: 84%
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
       1          32         416         76  0.00%  0.00%  0.00%   0 Chunk Manager   
       2       32788      342520         95  0.00%  0.05%  0.05%   0 Load Meter      
       3           0           1          0  0.00%  0.00%  0.00%   0 chkpt message ha
       4           0           1          0  0.00%  0.00%  0.00%   0 EDDRI_MAIN      
       5     2624584      213262      12306  0.00%  0.03%  0.04%   0 Check heaps     
       6          56         373        150  0.00%  0.00%  0.00%   0 Pool Manager    
       7           0           2          0  0.00%  0.00%  0.00%   0 Timers          
       8           0           2          0  0.00%  0.00%  0.00%   0 ATM AutoVC Perio
       9           0           2          0  0.00%  0.00%  0.00%   0 ATM VC Auto Crea
      10          16       28543          0  0.00%  0.00%  0.00%   0 IPC Dynamic Cach
      11           0           1          0  0.00%  0.00%  0.00%   0 IPC Zone Manager
      12         688     1670887          0  0.00%  0.00%  0.00%   0 IPC Periodic Tim
      13         520     1670887          0  0.00%  0.00%  0.00%   0 IPC Deferred Por
      14           0           1          0  0.00%  0.00%  0.00%   0 IPC Seat Manager
      15           0           1          0  0.00%  0.00%  0.00%   0 IPC BackPressure
      16     9007072    30711869        293  1.35%  0.15%  0.11%   0 EnvMon          
      17           0           1          0  0.00%  0.00%  0.00%   0 OIR Handler     
      18           0           1          0  0.00%  0.00%  0.00%   0 Crash writer    
      19        1380        3892        354  0.00%  0.00%  0.00%   0 ARP Input       
      20        1584     1784473          0  0.00%  0.00%  0.00%   0 ARP Background  
      21           0           2          0  0.00%  0.00%  0.00%   0 ATM Idle Timer  
      22           0           1          0  0.00%  0.00%  0.00%   0 CEF MIB API     
      23           4         134         29  0.00%  0.00%  0.00%   0 AAA high-capacit
      24           0           1          0  0.00%  0.00%  0.00%   0 AAA_SERVER_DEADT
      25           0           1          0  0.00%  0.00%  0.00%   0 Policy Manager  
      26           0           2          0  0.00%  0.00%  0.00%   0 DDR Timers      
      27           0           5          0  0.00%  0.00%  0.00%   0 Entity MIB API  
      28           0           2          0  0.00%  0.00%  0.00%   0 Serial Backgroun
      29           0           1          0  0.00%  0.00%  0.00%   0 RO Notify Timers
      30           0           1          0  0.00%  0.00%  0.00%   0 RMI RM Notify Wa
      31          28         281         99  0.00%  0.00%  0.00%   0 EEM ED Syslog   
      32           0           2          0  0.00%  0.00%  0.00%   0 SMART           
      33         724     1712571          0  0.00%  0.00%  0.00%   0 GraphIt         
      34           0           2          0  0.00%  0.00%  0.00%   0 Dialer event    
      35           0           1          0  0.00%  0.00%  0.00%   0 SERIAL A'detect 
      36           0           2          0  0.00%  0.00%  0.00%   0 XML Proxy Client
      37           0           2          0  0.00%  0.00%  0.00%   0 VSA background  
      38           0           1          0  0.00%  0.00%  0.00%   0 VSA Cleanup Proc
      39           0           1          0  0.00%  0.00%  0.00%   0 Critical Bkgnd  
      40        4348      444483          9  0.00%  0.00%  0.00%   0 Net Background  
      41           0           2          0  0.00%  0.00%  0.00%   0 IDB Work        
      42          32         501         63  0.00%  0.00%  0.00%   0 Logger          
      43        1236     1710802          0  0.00%  0.00%  0.00%   0 TTY Background  
      44       16504     1712627          9  0.07%  0.00%  0.00%   0 Per-Second Jobs 
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
      45          20          34        588  0.00%  0.00%  0.00%   0 IF-MGR control p
      46           8          40        200  0.00%  0.00%  0.00%   0 IF-MGR event pro
      47           0           1          0  0.00%  0.00%  0.00%   0 Inode Table Dest
      48           0           1          0  0.00%  0.00%  0.00%   0 IKE HA Mgr      
      49           0           1          0  0.00%  0.00%  0.00%   0 IPSEC HA Mgr    
      50           4           4       1000  0.00%  0.00%  0.00%   0 rf task         
      51       12808      179149         71  0.00%  0.00%  0.00%   0 Net Input       
      52        1304      342532          3  0.00%  0.00%  0.00%   0 Compute load avg
      53      610136       28974      21058  0.00%  0.00%  0.00%   0 Per-minute Jobs 
      54           0           1          0  0.00%  0.00%  0.00%   0 Token Daemon    
      55           4       10570          0  0.00%  0.00%  0.00%   0 Transport Port A
      56        1272      505453          2  0.00%  0.00%  0.00%   0 HC Counter Timer
      57           0           1          0  0.00%  0.00%  0.00%   0 Coproc Event Pro
      58           0           1          0  0.00%  0.00%  0.00%   0 POS APS Event Pr
      59           0           1          0  0.00%  0.00%  0.00%   0 SONET alarm time
      60           0           1          0  0.00%  0.00%  0.00%   0 CSP Timer       
      61         204           4      51000  0.00%  0.00%  0.00%   0 USB Startup     
      62           0           2          0  0.00%  0.00%  0.00%   0 FPD Management P
      63           0           1          0  0.00%  0.00%  0.00%   0 FPD Action Proce
      64           0           2          0  0.00%  0.00%  0.00%   0 VNM DSPRM MAIN  
      65           0           1          0  0.00%  0.00%  0.00%   0 RF_INTERDEV_DELA
      66           0           1          0  0.00%  0.00%  0.00%   0 RF_INTERDEV_SCTP
      67         464     1712577          0  0.00%  0.00%  0.00%   0 ISA Common Helpe
      68           0           2          0  0.00%  0.00%  0.00%   0 Flash MIB Update
      69           0          58          0  0.00%  0.00%  0.00%   0 Flash Card Oir  
      70           0           1          0  0.00%  0.00%  0.00%   0 CES Line Conditi
      71           0           1          0  0.00%  0.00%  0.00%   0 CF_INTERDEV_SCTP
      72           0           1          0  0.00%  0.00%  0.00%   0 Async write proc
      73           0           2          0  0.00%  0.00%  0.00%   0 Ethernet CFM    
      74         736     1670893          0  0.00%  0.00%  0.00%   0 Ethernet Timer C
      75           0           1          0  0.00%  0.00%  0.00%   0 delayed evt hand
      76          28         112        250  0.00%  0.00%  0.00%   0 AAA Server      
      77           0           1          0  0.00%  0.00%  0.00%   0 AAA ACCT Proc   
      78           0           1          0  0.00%  0.00%  0.00%   0 ACCT Periodic Pr
      79           0           2          0  0.00%  0.00%  0.00%   0 AAA Dictionary R
      80         744     1670882          0  0.00%  0.00%  0.00%   0 BGP Scheduler   
      81           0           2          0  0.00%  0.00%  0.00%   0 Ethernet OAM Pro
      82           0           2          0  0.00%  0.00%  0.00%   0 Ethernet LMI    
      83           0           2          0  0.00%  0.00%  0.00%   0 CEF switching ba
      84        3684       14726        250  0.00%  0.00%  0.00%   0 ADJ resolve proc
      85           8          30        266  0.00%  0.00%  0.00%   0 IP ARP Adjacency
      86           0           1          0  0.00%  0.00%  0.00%   0 IP ARP Retry Age
      87     3481296     6804010        511  0.00%  0.02%  0.01%   0 IP Input        
      88           0           1          0  0.00%  0.00%  0.00%   0 ICMP event handl
      89           0           9          0  0.00%  0.00%  0.00%   0 TurboACL        
      90           0           2          0  0.00%  0.00%  0.00%   0 TurboACL chunk  
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
      91           0           1          0  0.00%  0.00%  0.00%   0 IPv6 Echo event 
      92          16        2854          5  0.00%  0.00%  0.00%   0 MOP Protocols   
      93           0           1          0  0.00%  0.00%  0.00%   0 LSP Tunnel FRR  
      94           0           1          0  0.00%  0.00%  0.00%   0 MPLS Auto-Tunnel
      95           0           3          0  0.00%  0.00%  0.00%   0 PPP Hooks       
      96           0           1          0  0.00%  0.00%  0.00%   0 Async write proc
      97           0           1          0  0.00%  0.00%  0.00%   0 SSS Manager     
      98           0           1          0  0.00%  0.00%  0.00%   0 SSS Feature Mana
      99           0           1          0  0.00%  0.00%  0.00%   0 SSS Feature Time
    100           0           2          0  0.00%  0.00%  0.00%   0 Spanning Tree   
    101           0           1          0  0.00%  0.00%  0.00%   0 X.25 Encaps Mana
    102          20          96        208  0.00%  0.00%  0.00%   0 SSM connection m
    103           0           1          0  0.00%  0.00%  0.00%   0 AC Switch       
    104           4        5709          0  0.00%  0.00%  0.00%   0 Authentication P
    105           0           1          0  0.00%  0.00%  0.00%   0 Auth-proxy AAA B
    106           0           2          0  0.00%  0.00%  0.00%   0 EAPoUDP Process 
    107           0           2          0  0.00%  0.00%  0.00%   0 IP Host Track Pr
    108           0           2          0  0.00%  0.00%  0.00%   0 KRB5 AAA        
    109        1152       49386         23  0.00%  0.00%  0.00%   0 IP Background   
    110        2276       28582         79  0.00%  0.00%  0.00%   0 IP RIB Update   
    111          60       34442          1  0.00%  0.00%  0.00%   0 CEF background p
    112        6784     2485297          2  0.00%  0.00%  0.00%   0 CEF: IPv4 proces
    113          12         104        115  0.00%  0.00%  0.00%   0 ADJ background  
    114           0           2          0  0.00%  0.00%  0.00%   0 PPP IP Route    
    115           0           2          0  0.00%  0.00%  0.00%   0 PPP IPCP        
    116           0           1          0  0.00%  0.00%  0.00%   0 IP Traceroute   
    117        7292     7550370          0  0.00%  0.00%  0.00%   0 TCP Timer       
    118        1300       10511        123  0.00%  0.00%  0.00%   0 TCP Protocols   
    119           0           1          0  0.00%  0.00%  0.00%   0 Socket Timers   
    120       18228       11429       1594  0.00%  0.00%  0.00%   0 HTTP CORE       
    121           0           2          0  0.00%  0.00%  0.00%   0 RLM groups Proce
    122           0           1          0  0.00%  0.00%  0.00%   0 L2X Data Daemon 
    123           0           1          0  0.00%  0.00%  0.00%   0 ac_atm_state_eve
    124           0           2          0  0.00%  0.00%  0.00%   0 SNMP Timers     
    125        1320     1710737          0  0.00%  0.00%  0.00%   0 RUDPV1 Main Proc
    126           0           1          0  0.00%  0.00%  0.00%   0 bsm_timers      
    127         568     1710728          0  0.00%  0.00%  0.00%   0 bsm_xmt_proc    
    128           0           1          0  0.00%  0.00%  0.00%   0 COPS            
    129           0           2          0  0.00%  0.00%  0.00%   0 Dialer Forwarder
    130           0           3          0  0.00%  0.00%  0.00%   0 Flow Exporter Ti
    131           0           2          0  0.00%  0.00%  0.00%   0 ATM OAM Input   
    132           0           2          0  0.00%  0.00%  0.00%   0 ATM OAM TIMER   
    133           0           1          0  0.00%  0.00%  0.00%   0 RARP Input      
    134           0           1          0  0.00%  0.00%  0.00%   0 IPv6 Inspect Tim
    135           0           1          0  0.00%  0.00%  0.00%   0 LAPB Process    
    136           0           2          0  0.00%  0.00%  0.00%   0 LFDp Input Proc 
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
    137           0           1          0  0.00%  0.00%  0.00%   0 PAD InCall      
    138           0           2          0  0.00%  0.00%  0.00%   0 X.25 Background 
    139           0           2          0  0.00%  0.00%  0.00%   0 PPP Bind        
    140           0           2          0  0.00%  0.00%  0.00%   0 PPP SSS         
    141           0           1          0  0.00%  0.00%  0.00%   0 MQC Flow Event B
    142       35504   424737438          0  0.23%  0.25%  0.23%   0 HQF Shaper Backg
    143        4068    17031478          0  0.00%  0.00%  0.00%   0 RBSCP Background
    144           0           2          0  0.00%  0.00%  0.00%   0 SCTP Main Proces
    145           0           1          0  0.00%  0.00%  0.00%   0 VPDN call manage
    146           0           1          0  0.00%  0.00%  0.00%   0 CHKPT EXAMPLE   
    147           0           1          0  0.00%  0.00%  0.00%   0 CHKPT DevTest   
    148           0           1          0  0.00%  0.00%  0.00%   0 IPS Process     
    149           0           2          0  0.00%  0.00%  0.00%   0 IPS Auto Update 
    150           0           2          0  0.00%  0.00%  0.00%   0 SDEE Management 
    151         948     3338807          0  0.00%  0.00%  0.00%   0 Inspect process 
    152           0           1          0  0.00%  0.00%  0.00%   0 xcpa-driver     
    153          52      136947          0  0.00%  0.00%  0.00%   0 FW DP Inspect pr
    154        1112     3338806          0  0.00%  0.00%  0.00%   0 CCE DP URLF cach
    155           0           2          0  0.00%  0.00%  0.00%   0 URL filter proc 
    156           0           1          0  0.00%  0.00%  0.00%   0 XSM_EVENT_ENGINE
    157         144      171238          0  0.00%  0.00%  0.00%   0 XSM_ENQUEUER    
    158          68      171238          0  0.00%  0.00%  0.00%   0 XSM Historian   
    159           0           1          0  0.00%  0.00%  0.00%   0 Select Timers   
    160           4           2       2000  0.00%  0.00%  0.00%   0 HTTP Process    
    161           0           2          0  0.00%  0.00%  0.00%   0 CIFS API Process
    162           0           2          0  0.00%  0.00%  0.00%   0 CIFS Proxy Proce
    163           0           1          0  0.00%  0.00%  0.00%   0 Crypto HW Proc  
    164          56      114166          0  0.00%  0.00%  0.00%   0 ACE policy loade
    165         156       68505          2  0.00%  0.00%  0.00%   0 CRM_CALL_UPDATE_
    166       36688      172862        212  0.00%  0.00%  0.00%   0 BGP I/O         
    167           0           2          0  0.00%  0.00%  0.00%   0 AAA Cached Serve
    168           0           2          0  0.00%  0.00%  0.00%   0 ENABLE AAA      
    169           0           1          0  0.00%  0.00%  0.00%   0 EM Background Pr
    170           0           1          0  0.00%  0.00%  0.00%   0 Key chain liveke
    171           0           2          0  0.00%  0.00%  0.00%   0 LINE AAA        
    172          44         112        392  0.00%  0.00%  0.00%   0 LOCAL AAA       
    173           0          42          0  0.00%  0.00%  0.00%   0 MPLS Auto Mesh P
    174           0           2          0  0.00%  0.00%  0.00%   0 TPLUS           
    175           0           2          0  0.00%  0.00%  0.00%   0 VSP_MGR         
    176           0           1          0  0.00%  0.00%  0.00%   0 FW_TEST_TRP     
    177           0           1          0  0.00%  0.00%  0.00%   0 EPM MAIN PROCESS
    178           4           3       1333  0.00%  0.00%  0.00%   0 Crypto WUI      
    179           0           2          0  0.00%  0.00%  0.00%   0 Crypto Support  
    180           0           1          0  0.00%  0.00%  0.00%   0 IPSECv6 PS Proc 
    181           0           1          0  0.00%  0.00%  0.00%   0 CCVPM_HTSP      
    182           0           1          0  0.00%  0.00%  0.00%   0 CCVPM_R2        
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
    183           0           1          0  0.00%  0.00%  0.00%   0 EPHONE MWI Refre
    184           0        1903          0  0.00%  0.00%  0.00%   0 FB/KS Log HouseK
    185           0           2          0  0.00%  0.00%  0.00%   0 EPHONE MWI BG Pr
    186           0           1          0  0.00%  0.00%  0.00%   0 Skinny HW confer
    187           0           1          0  0.00%  0.00%  0.00%   0 CCSWVOICE       
    188      206492      114180       1808  0.00%  0.00%  0.00%   0 BGP Scanner     
    189           0           1          0  0.00%  0.00%  0.00%   0 http client proc
    190           0           3          0  0.00%  0.00%  0.00%   0 BGP Event       
    191           0           1          0  0.00%  0.00%  0.00%   0 QOS_MODULE_MAIN 
    192           0           1          0  0.00%  0.00%  0.00%   0 RPMS_PROC_MAIN  
    193           0           1          0  0.00%  0.00%  0.00%   0 VoIP AAA        
    194           0           2          0  0.00%  0.00%  0.00%   0 Dialog Manager  
    195         184         104       1769  0.00%  0.00%  0.00%   0 crypto engine pr
    196           0           4          0  0.00%  0.00%  0.00%   0 Crypto CA       
    197           0           1          0  0.00%  0.00%  0.00%   0 Crypto PKI-CRL  
    198       28008       64288        435  0.00%  0.00%  0.00%   0 encrypt proc    
    199      384768       28300      13596  0.00%  0.00%  0.00%   0 crypto sw pk pro
    200           8          27        296  0.00%  0.00%  0.00%   0 Crypto INT      
    201         456        2019        225  0.00%  0.00%  0.00%   0 Crypto IKE Dispa
    202        2128        2714        784  0.00%  0.00%  0.00%   0 Crypto IKMP     
    203           0           1          0  0.00%  0.00%  0.00%   0 IPSEC manual key
    204         180       85737          2  0.00%  0.00%  0.00%   0 IPSEC key engine
    205           0           1          0  0.00%  0.00%  0.00%   0 CRYPTO QoS proce
    206          28         142        197  0.00%  0.00%  0.00%   0 Crypto ACL      
    207           0           1          0  0.00%  0.00%  0.00%   0 Crypto PAS Proc 
    208           0           1          0  0.00%  0.00%  0.00%   0 GDOI GM Process 
    209           0           1          0  0.00%  0.00%  0.00%   0 UNICAST REKEY   
    210           0           1          0  0.00%  0.00%  0.00%   0 UNICAST REKEY AC
    211           0           1          0  0.00%  0.00%  0.00%   0 MV64 TDR Process
    212           0           1          0  0.00%  0.00%  0.00%   0 IMA Traps       
    213           0           1          0  0.00%  0.00%  0.00%   0 SYSMGT Events   
    214           0           2          0  0.00%  0.00%  0.00%   0 Control-plane ho
    215           0           1          0  0.00%  0.00%  0.00%   0 DATA Transfer Pr
    216           0           1          0  0.00%  0.00%  0.00%   0 DATA Collector  
    217           0           1          0  0.00%  0.00%  0.00%   0 Async write proc
    218         116         292        397  0.00%  0.00%  0.00%   0 AAA SEND STOP EV
    219         136      171243          0  0.00%  0.00%  0.00%   0 RMON Recycle Pro
    220           0           2          0  0.00%  0.00%  0.00%   0 RMON Deferred Se
    221           0           1          0  0.00%  0.00%  0.00%   0 Syslog Traps    
    222           0           2          0  0.00%  0.00%  0.00%   0 EEM ED Resource 
    223           0           2          0  0.00%  0.00%  0.00%   0 EEM ED Routing  
    224           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Track    
    225          80       53575          1  0.00%  0.00%  0.00%   0 Crypto cTCP proc
    226           0           1          0  0.00%  0.00%  0.00%   0 IP SLAs Ethernet
    227           4           1       4000  0.00%  0.00%  0.00%   0 RMON Packets    
    228         820     1709984          0  0.00%  0.00%  0.00%   0 trunk conditioni
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
    229           0           1          0  0.00%  0.00%  0.00%   0 trunk conditioni
    230          12         120        100  0.00%  0.00%  0.00%   0 EEM Server      
    231           4           2       2000  0.00%  0.00%  0.00%   0 Call Home proces
    232          52         260        200  0.00%  0.00%  0.00%   0 Syslog          
    233           0           1          0  0.00%  0.00%  0.00%   0 VPDN Test       
    234           0           2          0  0.00%  0.00%  0.00%   0 EEM Policy Direc
    235           0           2          0  0.00%  0.00%  0.00%   0 EEM ED CLI      
    236           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Counter  
    237           0           3          0  0.00%  0.00%  0.00%   0 EM ED GOLD      
    238           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Interface
    239           0           3          0  0.00%  0.00%  0.00%   0 EEM ED IOSWD    
    240           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Ipsla    
    241           0           3          0  0.00%  0.00%  0.00%   0 EEM ED None     
    242           0           2          0  0.00%  0.00%  0.00%   0 EEM ED Nf       
    243           0           3          0  0.00%  0.00%  0.00%   0 EEM ED OIR      
    244           0           3          0  0.00%  0.00%  0.00%   0 EEM ED RF       
    245           0           3          0  0.00%  0.00%  0.00%   0 EEM ED SNMP     
    246           0           2          0  0.00%  0.00%  0.00%   0 EEM ED SNMP Noti
    247          36       42890          0  0.00%  0.00%  0.00%   0 EEM ED Timer    
    248           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Test     
    249           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Config   
    250           0           3          0  0.00%  0.00%  0.00%   0 EEM ED Env      
    251           0           3          0  0.00%  0.00%  0.00%   0 EEM ED RPC      
    252           0           2          0  0.00%  0.00%  0.00%   0 cpf_process_msg_
    253           0           1          0  0.00%  0.00%  0.00%   0 Key Proc        
    254          36       28543          1  0.00%  0.00%  0.00%   0 Call Home Timer 
    255           0           1          0  0.00%  0.00%  0.00%   0 tHUB            
    256           0           1          0  0.00%  0.00%  0.00%   0 Async write proc
    257         104         953        109  0.00%  0.00%  0.00%   0 SSH Event handle
    258          16       28543          0  0.00%  0.00%  0.00%   0 Secure Login    
    259          84          54       1555  0.00%  0.00%  0.00%   0 Tunnel Security 
    260          56          67        835  0.00%  0.00%  0.00%   0 Crypto SS Proces
    261           0           1          0  0.00%  0.00%  0.00%   0 cpf_process_tpQ 
    262           0           1          0  0.00%  0.00%  0.00%   0 TCP Listener    
    263           0           2          0  0.00%  0.00%  0.00%   0 IP Flow Top Talk
    264        1180     3338804          0  0.00%  0.00%  0.00%   0 IP NAT Ager     
    265           0           1          0  0.00%  0.00%  0.00%   0 IP NAT WLAN     
    266          24       28563          0  0.00%  0.00%  0.00%   0 IP SLAs Event Pr
    267      434504     1489526        291  0.00%  0.00%  0.00%   0 IP SNMP         
    268      170304      877961        193  0.00%  0.00%  0.00%   0 PDU DISPATCHER  
    269      495704      877992        564  0.00%  0.00%  0.00%   0 SNMP ENGINE     
    270           0           2          0  0.00%  0.00%  0.00%   0 IP SNMPV6       
    271           0           1          0  0.00%  0.00%  0.00%   0 SNMP ConfCopyPro
    272           0           1          0  0.00%  0.00%  0.00%   0 SNMP Traps      
    273     1185420     1715196        691  0.00%  0.00%  0.00%   0 NTP             
    274         412          29      14206  0.00%  0.00%  0.00%   0 VTEMPLATE Backgr
    PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
    275       18608      174262        106  0.00%  0.00%  0.00%   0 BGP Router      
    276          36       27171          1  0.00%  0.00%  0.00%   0 DFS flush period
    277           8          12        666  0.00%  0.00%  0.00%   0 Collection proce
    278          16         651         24  0.00%  0.00%  0.00%   0 CRYPTO IKMP IPC 
    279        1724         850       2028  0.00%  0.00%  0.00%   2 SSH Process     
    281           0           1          0  0.00%  0.00%  0.00%   0 Skinny MOH Event
    282          64      173856          0  0.00%  0.00%  0.00%   0 Skinny Socket Se
    283           0        1451          0  0.00%  0.00%  0.00%   0 Web Write Housek
    ==============================================================
    wish to help ASAP

    JosephDoherty wrote:DisclaimerThe   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.Liability DisclaimerIn   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.PostingThe fact you are matching with any ACLs, will decrease maximum performance.The fact you are using a policy-may, will decrease maximum performance.The fact is a -G2 only has finite capacity.In other words, what you're seeing might be completely normal for your traffic volume, your traffic composition and your configuration.If you believe your router is overloaded, and generally above 75% CPU might be so considered, either you'll need a faster device (see ASR 1Ks), or you might try changing your configuration to decrease your configuration load on the router.What's your CPU load if your remove the policy-map from the interface?If removing the policy-map from the interface shows a significant CPU loading decrease - QED.If you need/desire such QoS, then you'll want a "faster" router.You might be also able to decrease your CPU a little by some "tuning".  I already mention the TurboACL feature statement.  With ACLs, fewer are faster, and how they ordered (especially without TurboACL) impacts CPU.  How you order you class-maps, within a policy, and how the match statements are ordered will also have some impact on the CPU load.  If buffers are being allocated/deallocated, that too will impact CPU loading.  I assume CEF is enabled, but for some traffic, flow caching might decrease CPU load.Remember a software based router, like the 7200s, are, more or less, a computer that takes your configuration and determines what's to be done with every packet it "sees".  The more your configuration requires for per packet analysis, the more load for each packet.There are whitepapers addressing high CPU load caused by "process switching", but what you posted appears to be mostly all interrupt processing, which is "fast path", or optimal, packet forwarding.  There's not much you can normally do to improve against that, other than insuring your configuration is as optimal as possible for your needs (again, things like sequencing/ordering of statements).
    hi ,
    thanks very very much for this nice information,
    let me answer you :
    you said that NPE G2 has finite capacity , but how to know this full capacity ???
    i mean that my policy map is matching the traffic , but the matched traffic is not being enhancemend ??!!!
    last about two weeks , the matched traffic of youtube was excellent and no interrupt durting the my rush hour.
    i didnt change any thing, but my bw increased from 730 Mbps to 760Mbps ,
    im un able to make sure that i need to chnage my platform to faster one.
    agian
    my cpu is 60 % without QOS
    after QOS it increase to 80-85 %
    agian ,
    about NBAR
    i want to tell you that i cant depend on NBAR , as an example , im matching the ips of videos of facebook , i cant depend on NBAR because it is https videos.
    but in summary ,
    my qos is matching well , but i have no real enhancement for my traffic.
    did you face my issue before  ???
    i mean have you see like my problem ?
    like my router platform  with cpu over 80 % and 750Mbps , and matched qos without good result ??
    note that i upgraded to iso 15 , but seems same issue !!!
    regards

  • Cisco ASA 5505 IPSec tunnel won't establish until remote site attempts to connect

    I have a site to site IPSec tunnel setup and operational but periodically the remote site goes down, because of a somewhat reliable internet connection. The only way to get the tunnel to re-establish is to go to the remote site and simply issue a ping from a workstation on the remote network. We were having this same issue with a Cisco PIX 506E but decided to upgrade the hardware and see if that resolve the issue. It ran for well over a year and our assumtions was that the issue was resolved. I was looking in the direction of the security-association lifetime but if we power cycle the unit, I would expect that it would kill the SA but even after power cycling, the VPN does not come up automatically.
    Any assistance would be appreciated.
    ASA Version 8.2(1)
    hostname KRPS-FW
    domain-name lottonline.org
    enable password uniQue
    passwd uniQue
    names
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.20.30.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address xxx.xxx.xxx.xxx 255.255.255.248
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    description Inside Network on VLAN1
    interface Ethernet0/2
    shutdown
    interface Ethernet0/3
    shutdown
    interface Ethernet0/4
    shutdown
    interface Ethernet0/5
    shutdown
    interface Ethernet0/6
    shutdown
    interface Ethernet0/7
    description Inside Network on VLAN1
    ftp mode passive
    dns server-group DefaultDNS
    domain-name lottonline.org
    access-list NONAT extended permit ip 10.20.30.0 255.255.255.0 10.20.20.0 255.255.255.0
    access-list NONAT extended permit ip 10.20.30.0 255.255.255.0 192.168.0.0 255.255.255.0
    access-list NONAT extended permit ip 10.20.30.0 255.255.255.0 192.168.15.0 255.255.255.0
    access-list KWPS-BITP extended permit ip 10.20.30.0 255.255.255.0 10.20.20.0 255.255.255.0
    access-list KWPS-BITP extended permit ip 10.20.30.0 255.255.255.0 192.168.0.0 255.255.255.0
    access-list KWPS-BITP extended permit ip 10.20.30.0 255.255.255.0 192.168.15.0 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list NONAT
    nat (inside) 1 0.0.0.0 0.0.0.0
    access-group OUTSIDE_ACCESS_IN in interface outside
    route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 10.20.30.0 255.255.255.0 inside
    http 10.20.20.0 255.255.255.0 inside
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map DYNMAP 65535 set transform-set ESP-AES-256-SHA
    crypto map VPNMAP 1 match address KWPS-BITP
    crypto map VPNMAP 1 set peer xxx.xxx.xxx.001
    crypto map VPNMAP 1 set transform-set ESP-AES-256-SHA
    crypto map VPNMAP 65535 ipsec-isakmp dynamic DYNMAP
    crypto map VPNMAP interface outside
    crypto isakmp enable outside
    crypto isakmp policy 5
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 65535
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    ssh timeout 5
    console timeout 0
    management-access inside
    tunnel-group xxx.xxx.xxx.001 type ipsec-l2l
    tunnel-group xxx.xxx.xxx.001 ipsec-attributes
    pre-shared-key somekey

    Hi there,
    I had same issue with PIX 506E and it was not even a circuit issue and I got ride of it and problem got fixed with PIX515E
    I don't know, the device is too old to stay alive.
    thanks

  • Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

    Hi All,
    appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
    *Mar  1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:10.033: *** CRASH_LOG = YES
    *Mar  1 00:00:10.333: Port 1 is not presentSecurity Core found.
    Base Ethernet MAC address: C8:9C:1D:53:57:5E
    *Mar  1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
    *Mar  1 00:00:11.494:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:13.647: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Wed 13-Apr-11 12:50 by prod_rel_team
    *Mar  1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
    *Mar  1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
    *Mar  1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
    *Mar  1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
    *Mar  1 00:09:17.912:  status of voice_diag_test from WLC is false
    *Mar  1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
    *Mar  1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Mar  1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
    Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
    *Mar  1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
    *May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:03.448:  status of voice_diag_test from WLC is false
    *May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:15.450:  status of voice_diag_test from WLC is false
    *May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
    *May 25 08:27:27.447:  status of voice_diag_test from WLC is false
    *May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:39.446:  status of voice_diag_test from WLC is false
    *May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
    *May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
    *May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
    *May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
    *May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
    *May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
    *May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
    i searched for the regulatory domains difference between  AIR-LAP1041N-E-K9 and  AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
    just to mention that our configuration in WLC for regulatory domains is:
    Configured Country Code(s) AR 
    Regulatory Domain  802.11a:  -A
                                 802.11bg: -A
    My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
    Appreciate your kind support,
    Wisam Q.

    Hi Ramon,
    thank you for the reply but as shown in the below link:
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
    the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
    Thanks,
    Wisam Q.

  • Cisco APs not updating after WLC-update

    Hello everyone,
    I need to update my 5508 WLCs to a newer software, to support new AP-models.
    Started with AIR-CT5500-K9-1-7-0-0-FUS.aes and AIR-CT5500-K9-7-0-240-0.aes, everything worked fine. Pre-Downloaded the newer Image to the APs, restarted the WLCs and everything was ok.
    Now I tried to update to 7.6.100.0 as well as 7.4.121.0. Both Versions should support my APs, but it doesn't work at all.
    Any ideas are highly appreciated.
    If you need further output, just let me know.
    Regards,
    Manuel
    These are some informations about the environment, AP-info and logging after "upgrade" to 7.4.121.0, controller-information after downgrading again...
    AP#  sh ver
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(23c)JA7, RELEASE SOFTWARE (fc1)
    ROM: Bootstrap program is C1240 boot loader BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)
    AP uptime is 1 minute System returned to ROM by power-on System image file is "flash:/c1240-k9w8-mx.124-23c.JA7/c1240-k9w8-mx.124-23c.JA7"
    cisco AIR-LAP1242AG-E-K9  (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
    Processor board ID FCZ1545812F
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on LWAPP image version 7.0.240.0
    1 FastEthernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 70:CA:9B:07:86:B8
    Part Number                          : 73-10256-07
    PCA Assembly Number                  : 800-26918-06
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC15402NP4
    Top Assembly Part Number            : 800-29152-03
    Top Assembly Serial Number          : FCZ1545812F
    Top Revision Number                  : A0
    Product/Model Number                : AIR-LAP1242AG-E-K9
    Configuration register is 0xF
    AP#dir
    Directory of flash:/
    2  -rwx      89311  Jan 18 2014 20:41:00 +00:00  event.log
    3  drwx          64  Jan 18 2014 20:43:21 +00:00  update
    5  drwx        256  Jan 18 2014 20:40:55 +00:00  c1240-k9w8-mx.124-23c.JA7
    4  -rwx        6168  Nov 2 2011 23:32:18 +00:00  private-multiple-fs
    7  -rwx        395  Mar 1 2002 00:00:05 +00:00  env_vars
    15740928 bytes total (8772096 bytes free)
    AP#dir
    Directory of flash:/c1240-k9w8-mx.124-23c.JA7/
    9  -rwx      131328  Jan 18 2014 20:39:46 +00:00  7101.img
    10  -rwx        292  Jan 18 2014 20:39:46 +00:00  info
    11  -rwx    4642714  Jan 18 2014 20:40:55 +00:00  c1240-k9w8-mx.124-23c.JA7
    15  -rwx      131328  Jan 18 2014 20:40:56 +00:00  6701.img
    #sh logging --> see attached file
    CONTROLLER (unfortunately after downgrading it again):
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.0.240.0
    Bootloader Version............................... 1.0.16
    Field Recovery Image Version..................... 7.0.112.21
    Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
    Build Type....................................... DATA + WPS
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... WLC-IP
    Last Reset....................................... Software reset
    System Up Time................................... 0 days 0 hrs 26 mins 3 secs
    System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna Current Boot
    License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... DE  - Germany
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 2
    Number of Active Clients......................... 5
    Burned-in MAC Address............................ 1C:DF:0F:C6:D8:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 150
    (Cisco Controller) >show boot
    Primary Boot Image............................... 7.4.121.0
    Backup Boot Image................................ 7.0.240.0 (default) (active)
    (Cisco Controller) >show ap bundle primary
    Primary AP Image        Size
    ap1g2                  9576
    ap3g1                  6684
    ap3g2                  11208
    ap801                  5192
    ap802                  5232
    c1100                  3096
    c1130                  4972
    c1140                  4992
    c1200                  3364
    c1240                  4812
    c1250                  5512
    c1310                  3136
    c1520                  6412
    c3201                  4324
    c602i                  3716
    (Cisco Controller) >show ap bundle secondary
    Secondary AP Image      Size
    ap3g1                  6684
    ap801                  5192
    ap802                  5232
    c1100                  3096
    c1130                  4972
    c1140                  4992
    c1200                  3364
    c1240                  4812
    c1250                  5512
    c1310                  3136
    c1520                  6412
    c3201                  4324
    c602i                  3716
    Nachricht geändert durch Manuel Sporleder

    Hi Scott,
    I am not trying to pre-download it anymore, since this doesn't work at all.
    If I just restart the controller, the APs are downloading the image telling me "everything is fine", are rebooted and that stated with the old image again.
    This is what you can see in the attached log-file:
    *Mar  1 00:00:05.873: soap_prepare_new_image_crash: mini ios flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx
    *Mar  1 00:00:06.242: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:07.662: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:09.054: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
    *Mar  1 00:00:09.152: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
    *Mar  1 00:00:09.181:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:11.381: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    *Mar  1 00:00:11.440: %SYS-5-RESTART: System restarted
    *Mar  1 00:00:11.441: %SNMP-5-COLDSTART: SNMP agent on host AP is undergoing a cold start
    *Nov  2 23:31:59.107: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Nov  2 23:31:59.108: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Nov  2 23:31:59.929: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    *Nov  2 23:32:00.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Nov  2 23:32:00.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Nov  2 23:32:18.102: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Nov  2 23:32:18.163: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
    *Nov  2 23:32:18.345: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Nov  2 23:32:18.759:  status of voice_diag_test from WLC is false
    *Nov  2 23:32:18.847: Logging LWAPP message to 255.255.255.255.
    *Nov  2 23:32:33.181: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    *Nov  2 23:32:33.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Nov  2 23:32:34.212: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Nov  2 23:32:34.213: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
    *Jan 20 20:32:44.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: WLC-1-IP peer_port: 5246
    *Jan 20 20:32:44.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Jan 20 20:32:45.479: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: WLC-1-IP peer_port: 5246
    *Jan 20 20:32:45.480: %CAPWAP-5-SENDJOIN: sending Join Request to WLC-1-IP
    *Jan 20 20:32:45.481: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Jan 20 20:32:45.484: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from WLC-1-IPperform archive download capwap:/c1240 tar file
    *Jan 20 20:32:45.494: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Jan 20 20:32:45.499: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Jan 20 20:33:58.755: %DTLS-3-BAD_RECORD: Erroneous record received from WLC-1-IP: Duplicate (replayed) record
    *Jan 20 20:33:59.315: image upgrade successfully, system is now reloading
    This happens again and again and again...
    Regards, Manuel

  • Cisco Prime and UCS 220M3

    Dear folks,
    I have a confusion in one of my deployments. My client ordered initially a UCS 220M3 server, which came along with a windows CD. It was supposed to be used as an LMS 4.1 server. Later on there were some variation and customer wants to have prime infrastructure over it. Now I am unable to understand how to do it. The server which came doesnt have any OS. It has one 600 GB hard drive. Can anyone guide me what should i do / or order additionally to work out through this. I am pasting the BoQ for this server which is the original one before variation, the task is to make it work with Prime Infrastructure. Along with this i am attaching some snaps of the physical server and CIMC console...just to clear out any doubts... i will be very thankful if you suggest me the correct way.
    Part Number
    NMS
    LMS-4.1-100-K9
    Cisco Prime LMS 4.1 Base DVD - 100 device license
    1
    R200-BUN-4
    UCS C200 M2 Rack Svr  1x E5506  1x4GB  1PS
    1
    A01-X0113
    2.13GHz Xeon E5506 80W CPU/4MB cache/DDR3 800MHz
    1
    A02-M304GB2-L
    4GB DDR3-1333MHz RDIMM/PC3-10600/single rank/Low-Dual Volt
    2
    R200-D1TC03
    Gen 2 1TB SAS 7.2K RPM 3.5in HDD/hot plug/C200 drive sled
    1
    CAB-9K10A-UK
    Power Cord  250VAC 10A BS1363 Plug (13 A fuse)  UK
    2
    R2X0-PSU2-650W-SB
    650W power supply  w/added 5A Standby for UCS C200 or C210
    1
    MSWS-08R2-ENHV-RM
    Windows Svr 2008 R2 EN (1-8CPU  25CAL)  Media
    1
    R2X0-ML002
    LSI 1064E (4-port SAS 3.0G RAID 0  1  1E ) Mezz Card
    1
    A01-X0113
    2.13GHz Xeon E5506 80W CPU/4MB cache/DDR3 800MHz
    1
    N01-M304GB1
    4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs
    1
    R2X0-PSU2-650W-SB
    650W power supply  w/added 5A Standby for UCS C200 or C210
    1
    R2XX-G31032RAIL
    Rail Kit for UCS C200  C210 Rack Servers (23.5 to 36)
    1
    R200-BBLKD
    HDD slot blanking panel for UCS C200 M1 Rack Servers
    3
    R200-BHTS1
    CPU heat sink for UCS C200 Rack Server
    2
    R200-PCIBLKF1
    PCIe Full Height blanking panel for UCS 200 M1 Rack Server
    2
    R200-PCIBLKL1
    PCIe Low Profile blanking panel for UCS 200 M1 Rack Server
    1
    R200-SASCBL-001
    Internal SAS Cable for a base UCS C200 Server
    1
    CON-UCW5-R200BN4W
    UC PLUS 8X5XNBDOS UCSC200M2RckSvr 1x E5506 1x4GB 1PS
    1

    You have the necessary CPU, memory and hard drive specifications for an Express size installation (Reference).
    To install Prime Infrastructure 2.0 you will need to first install VMware ESX/ESXi. This is documented in the same Getting Started Guide I linked to above at this link.
    Once you get that far along, just follow the setup wizard and installation is pretty simple.
    FYI you will get better attention to Prime questions over in the Network Management forum.

  • Authentication an admin user on AP1200 with Cisco Secure

    Hello,
    I am trying to configure a Radius authentication for an administrator logging on an AP1200 via HTTP. On the Cisco Secure ACS server I can see that the authentication was successful and with a trace I can see also the 'Radius Pass' answer coming back to the AP1200.
    Unfortunately the administrators gets no access to the AP1200 Web page, and the login windows still ask for username/password. The log of the AP1200 does not give any error message.
    The software versions are following:
    AP1200 version 12.02A (the last one non-IOS available)
    CiscoSecure ACS v2.6 for Windows 2000/NT
    Release 2.6(3) Build 2
    The return packet 'Radius Pass' answer coming back to the AP1200 is the following:
    0000: 00 0b 46 aa a0 e8 00 a0 8e 77 de 75 08 00 45 00 |..F......w.u..E.|
    0010: 00 36 0b 70 00 00 7b 11 8b 0e ac 13 58 fd ac 12 |.6.p..{.....X...|
    0020: f8 15 06 6d 06 fd 00 22 05 f3*02 2b 00 1a 95 ad |...m..."...+....|
    0030: c4 60 e7 21 54 67 2a 60 0e 79 da b1 8f a6 08 06 |.`.!g*`.y......|
    0040: ff ff ff ff |....|
    I suspect that the the last ff ff ff ff (255.255.255.255) shall be equal to the IP address of the AP1200 which was send within the initial Radius request packet.
    Thanks in advance for your answer

    I had a similar problem with the 350 series. I receieved the following information that resolved my issues.
    Using RADIUS, You need to use cisco AV-Pair attribute for admin users with following syntex
    aironet:admin-capability=write+ident+admin+firmware
    Here is the procedure for the admin user you to define the Cisco AV pair Attributes .
    a) On acs select the interface configuration and go to the advance option ,
    selct "per-user Tacacs/ radius attribute " click on submit .
    b)On ACS , Select network configuration ,
    1) check if you have configuration >> Radio ( IOS /PIX available ) on the ACS
    if not add NAS type Radius IOS/PIX , note that this needed for IOS / PIX attribute
    2) After adding IOS/PIX device , select interface configuration >>Radius ( IOS / PIX )
    Enable [026/009/001] "cisco av-pair" option , again make sure that you enable
    at user and group level click on submit
    3) Add a user ( User setup >> ADD/EDIT ) to restrict administrator access control
    1) enable and configure cisco 09\001 cisco av-pair using
    aironet:admin-capability=write+ident+admin+firmware
    http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch8.htm#1073082

  • Cisco SPA 112 outbound call issue.

    Firstly, i applogize if i havent posted this in the correct section but this was my best educated guess.
    Recently upgraded to a Cisco SPA 112 which works fine.. but only for a few days,
    then If i try to call a number i get the dial tone but the number fails to
    connect & all i hear is silence.  If i hang up the phone to retry it fails to
    disconnect correctly and i get no dial tone for several minutes. After leaving the phone
    hungup for a few mins the dail tone returns but the same problem is still present.
    A hard/soft reset of the 112 fixes the issue temporarily, but reoccures again withinn a few days.
      Running Sipgate on lines 1 and 2 on Virgin media UK ISP.
    Model:
    SPA112, 2 FXS
    Hardware Version:
    1.0.0
    Boot Version:
    1.0.1 (Oct  6 2011 - 20:04:00)
    Firmware Version:
    1.3.1 (003) Dec 17 2012
    Recovery Firmware:
    1.0.2 (001)
    Im no expert and now at a loss and could do with some expert help tbh.

    Dan, i will see how it goes over the next week or so with the updated F/W & shall report back, and thanks for the link as i wasnt sure how to save a syslog.
    Should i set the verb as high as 6, or is that an over kill.
    Gabriel, I have an FTP running on my sat receiver which i will attempt to use to catch the log, but as for the the "sipgate registration", when i loose conection my ata reports its still registered & the sipgate URL, isnt in real time as far as i can tell.
    My ata would have normally shown its fault since my first post 6 days ago, but unfortunately a recent power cut has reset my testing period back to 1 day.

  • Cisco C827-4V router issues

    Hi,
    I have the following escenario and I'm having some issues getting calls to most of the offices; the strange part it that the calls work for about 4 out of the 18 locations and they're all configured the same; here is the equipment I'm using:
    Cisco 827--------PIX-------Cable modem
    The 827 has a 4 port voice module and this is what happens when we try to call other locations which in most cases have 2620 or 2621 routers with voice cards as well:
    1 San Antonio 001, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    2 Portland 002, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    5 San Diego 005, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    6 Phoenix 006, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    7 San Jose 007, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    8 Denver 008, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    9 Dallas 009, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    10 Chicago 010, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    11 Boston 011, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    12 Houston 012, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    13 Garden Grove 013, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    14 Seattle 014, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    26 Minneapolis 026, rings once, dialtone, additional digits do not break dialtone, times out with dead air
    3 Glendale 003, Dead air, times out with a busy
    18 Hartford 018, Works
    19 Charlotte 019, Works
    21 Cleveland 021, Works
    22 South Beloit 022, Works
    This setup worked long time ago when the router was on the outside with no firewall; and again with the current set up, it works for 4 of the locations and I'd like to know if somebody over there has a similar scenario and would like to share any information.
    Thanks very much

    I think its some config problems in the PIX .
    Add commands the following commands in PIX.
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801fc74a.shtml

Maybe you are looking for

  • Acrobat 9 Std Thinapp not lunching

    I recently downloaded and installed Acrobat 9 ThinApp (on Win 7). The installation went without errors. However, the app does not launch. Made several attempts to remove and reinstall the app, but it still won't launch. Any help will be much apprecia

  • How to debug script logic in NW?

    Hello, does anybody know how we can debug script logic in BPC NW? I wasn't able to find anything in the documentation. Without debuger or log the script logic is quite useless. Thanks for any advice Jan

  • Activation date unnecessarily delayed?

    Hello, Earlier this week we signed up to a new BT line. We actually already had one with a phone/broadband service but annoyingly when our neighbour moved out their provider (Sky) took our line instead of theirs. After a fews days of thinking the lac

  • ITunes Match Subscription not "sticking"

    When iTunes Match came out, I was an early adopter and really pleased with the results. I'm no less happy with the service now, but find that every so often, I need to "reapply" the iTunes Match procedure as it doesn't seem to be "sticking" to my iMa

  • Help with start up probs after force quit

    Hi there . I think I'm royally fckd. I was on blogger and my screen froze no cursor move nothing had to force quit. Now every time I try to turn on the MacBook Air all I get is a black screen and that start up noise over over over again . still black