Cisco Cius AnyConnect check box not getting enabled!

Folks,
     Here we are evaluating the Cisco Cius, however, while trying to get the AnyConnect "check box" marked, it does not check it! Does anyone knows why? Anything specific done on CUCM? BTW, cucm 8.5.1. Any ideas?
Thanks,
Thiago Henriques

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Similar Messages

  • When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button.  So I cannot set up backup.

    When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons.  It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

    If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders).  Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud.  Only iOS devices can back up to iCloud.  On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • Master data is not getting enabled in the InfoSet.

    Hi Experts,
    I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
    The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
    Can anyone please let me know how do I bring the master data in the query???
    Also please advice me whether I should have only 3 DSOs in the infoset.
    Please help.
    Thanks

    Hi,
    In my DSO I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

  • Added a Northbound SNMP Trap Receiver in Cisco PI 1.3, but not getting traps

    Hi;
    I tried going into the Administration, System Settings, Notification Receivers menu and adding a receiver. The receiver was our  Zenoss 4.2.3 Resource Manager system. Zenoss has no problems  receiving traps from  IOS devices such as switches; that is routine for us. For example, we  see snmpTrap_Linkdown events from 2960s,etc.
    However, even with all the possible events and severities checked in the PI GUI for the receiver, we did not get anything.
    As a quick test I added my desktop computer as a receiver and ran Wireshark. Nothing comes through from Cisco PI. 
    This is supposed to be UDP 162 stuff, so there ought not be a need for a handshake or need  to permit anything on the receiver side. I would expect to  see a total  fire-hose of traps after the receiver is added. But that reasoning conflicts with the need to set the SNMP Community string for the Notification Receiver...
    I downloaded the logs from Cisco PI and grepped through all of them for the IPs & names of the test receivers, but found no messages.
    Any idea what might be wrong? Do I need to restart something after adding the receiver?
    I did notice that even if I supply a ficticious IP and name for the receiver, after it is added the "Operational Status" still says "Up" ...
    I sure wish NCS came with a better help system - I can't find anything in the Cisco config guides that explains what a "Northbound" receiver is.
    So confused,
    Steve

    Hi Matt, thanks for taking the time to reply.
    >> Not sure why you are trying to do this with PI, this is really more of an ISE function
    We don't have ISE and won't be getting it ... still trying to afford the > $100K for PI licenses. Our Content Filter vendor suggested using PI.
    >>Is PI set to forward traps for client authentication?
    I have all traps and severities checked. Not sure last week nothing showed up in Wireshark. Today I am seeing some UDP info from PI hitting my test workstation. However, when I associate and dissassociate my laptop, nothing comes through. Most of what I see are rogue notifications.
    >> Are the controllers that PI is managing also set to forward the same traps?
    In Configure,Controllers, , Management, TrapControl, all possible boxes are checked.
    >> Is PI configured correctly to forward the traps you want?
    Please see answer above.
    >> Does your content filter have the right MIBs to decipher the traps correctly?
    The content filter vendor says they will customize their software as needed, but the first step is to see traps getting forwarded, and right now, it appeards that PI is not forwarding what I would expect from the GUI settings. Let's worry about MIB stuff after we are getting the raw trap data.
    Thanks,
    Steve
    Message was edited by: Stephen Crye, elaborated & provided latest info.

  • Report on Employees whose trips assigned check box not checked

    Hi SAP Guru's,
    We have a requirement wherein we have to generate a report having list of those employee's whose trip assigned check box is not checked in infotype 0017 (Travel Privileges) at the same time who are having trips created in their name. If you have any idea please share it with me.
    Thanks,
    Sudhakar.
    Edited by: sudhakar k on Feb 7, 2011 8:09 PM

    Hi Raynard,
    I did not give this table PA0017 as this table did not have the value trip assigned (field TRVFL).
    Hi Sudhakar,
    Get a list of pernr for whom field TRVFL is blank from that table. Then for the derived pernr check in table PTRV_PERIO or PTRV_HEAD whether any trips are assigned.
    You will get the desired result. You either create a customised report or pick the values from the table in the backend.
    Trust this helps.
    BR,
    Raj

  • Box not getting while printing

    Hi Everyone
    Presently i'm working with scripts.Iam using box command,in printpreview im getting box but while printing its not getting.Could anyone help on this?????
    Thnx
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Aug 19, 2008 10:39 AM

    hi
    Check these commands , may  be helpful to U
    Draws a vertical line along the complete height of the left hand edge of the window.
    /: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
    /: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
    /: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    /: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
    With Regards
    Always Learner

  • After saving GRN part1 tab not get enabled

    Hi,
    All excise details get reflected in GRN from PO , i have entered all details such as excise number, Excise date etc related all data
    excise.
    But after saving GRN part 1 tab not got enabled which contains serial number , part1 number . which is not case of other GRN.
    Please help me why this is so ?
    Regards,
    Rajendra D. Sawant.

    Hello,
    Please can you confirm are you working in ECC 6.0.
    Please check the material and vendors are mentioned in J1ID table. If J1ID does not contain the material and chapter id combination ,then system will not give you, excise tab in MIGO.
    And
    After save of MIGO system will not show excise or part1 tab in MIGO display   This is sap standard. you have to check in J_1IPART1 table with ref to Material doc number.
    Regards
    Mahesh Naik

  • Check boxes not retaining their correct value

    Hello, I have a perplexing issue going on. I have a simple, two checkbox form for updating two values in my login table. The row type is enum('y','n') so naturally a check box is my preferred way to set the value. Even though the value in the table is set to 'y', the check box in the form is never checked. I check it, click the submit button, and the update occurs in the table but the check box remains unchecked on the form. My code for the form is below. Any idea what I'm missing here?
    <form method="post" id="form4" action="<?php echo KT_escapeAttribute(KT_getFullUri()); ?>">
                <table cellpadding="4" cellspacing="0">
                  <tr><td><input  <?php if (!(strcmp(KT_escapeAttribute($row_rslogin['show_profile']),"y"))) {echo "checked";} ?> type="checkbox" name="show_profile" id="show_profile" value="y" /></td>
                    <td><label for="show_profile">Show my profile to other myJoy members.</label></td>
                  </tr>
                  <tr>
                  <td><input  <?php if (!(strcmp(KT_escapeAttribute($row_rslogin['get_mail']),"y"))) {echo "checked";} ?> type="checkbox" name="myjoymail_optout" id="myjoymail_optout" value="y" /></td>
                    <td><label for="myjoymail_optout">Send me myJoy email and notifications.</label></td>
                  </tr>
                  <tr>
                    <td></td><td><input type="submit" name="KT_Update3" id="KT_Update3" value="Save Prefs" /></td>
                  </tr>
                </table>
              </form>

    Hi,
    Well I took your code and changed it to:
    <?php if (!(strcmp("y","y"))) {echo "checked";} ?>
    Getting rid of the KT_escapeAttribute() and manually entered the y. It worked fine. And even with the KT_escapeAttribute() it will probably work fine. Have you doubled checked that the database is not storing a Captial Y or a 0 or 1? Your using varchar correct, not char?

  • "Make this recurring" check box not visible on Mobile

    I have created and successfully used a Donation button for my 501c(3) business.It works great in browsers on laptop and desktop computers.However, the "Make this recurring" check box is not visible on IPhone, IPod, IPad, Android Pad, or Android phone. How can I enable recurring payments on mobile phones?The URL on these devices starts: https : // mobile . paypal . com / us / cgi-bin / webscr ? cmd=_express-checkout-mobile ... Thanks in advance

    Louisey,
    Welcome to the forums!!
    a few questions first...
    a, did your site work in MobileMe initially before you purchased your domain name?
    b, does it still work if you type in your MobileMe URL rather than the purchased domain name?

  • Data grid view adding check box not able to check state

     i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search  of keyword that same row i am un checking the chek box when search it remain check how to making
    it check for al type of keyword

     i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search  of keyword that same row i am un checking the chek box when search it remain check how
    to making it check for al type of keyword
    Hello,
    It's not clear what the issue is, you could be more specific by sharing some screenshots and code.
    In addition, it will be more clear if you could separate the description into multiple sentences.
    Which control did you want to get help about? The checkbox or datagridview?
    If it is checkbox, did you want to keep checked or keep it uncheck?
    If it is datagridview, whether you are talking about checkbox column?
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cisco Cius AnyConnect

    Hi, I just been handed a Cisco Cius to play with. The Cisco Anyconnect is version 1.0
    and I want to upgrade this - does anyone know where I can get the software and what
    version I would be looking for and can I set the Cius to automatically upgrade or
    will I need to download and install.
    Any help gratefully received. Thanks
    Dominic

    You can download it here-
    http://download-sj.cisco.com/swc/esd/02/crypto/3DES/281278373/contract/anyconnect-all-packages-2.3.2016-k9.zip
    You will need a CCO account and a valid SmartNet contract.

  • Check number not getting updated in vendor line items

    Hi
    I am giving check to vendor. Hence i am assigning manual checks in FCH5. Then i did FCHU. After i did FCHU, my check number got updated in assignment field in bank line item. But i am getting problem for vendor line item.
    My vendor line item is not updated with check number. Hence i am unable to see what check number is issued against which payment document. I do not want to go in each every document and then click on environment and check information.
    I tried with check register also, but i am not getting vendor wise bank details smoothly.
    So i want to know how can i get check number in FBL1N vendor-wise. Is there any standard report?

    You should activate the PAYR-CHECF in FBL1N report. Execute FBL1N report for a vendor and go to Menu->Settings-> Special Fields. A new screen would open. There add the table PAYR and field CHECF. Save and exit out. Now the check number should be displayed in FBL1N report.
    Thanks,
    SD.

  • Check box not appearing in SWNADMIN

    Hi ALL,
    I'm trying to made configuration in by executing TCODE SWNADMIN.
    it is opening portal with administration info.
    But i'm not able to find Check box in system while creating sechdules.
    Pls suggest solution or relevant sap note for displaying check box.

    Hello,
    Perhaps you have to do the settings in Development and then transport them to QA.
    Changes aren't usually allowed in a Quality system.
    regards
    Rick Bakker
    Hanabi Technology

  • "Install Windows 7 or later version" check box not showing up in Boot Camp

    I am following a Reddit guide to dual boot Windows 7 on my late-2011 MBP. I've done every step up to installing Windows 7, but there is no check box to "Install Windows 7 or later" in Boot Camp. I've tried several other resources but none mention this. There is a "Remove Windows 7 or later version" check box which has a description stating it can install a Windows partition as well, but when I select it and click to go ahead it only has a selection to remove a Windows partition. I hope I'm just having a brain **** here, because I've been at this for a minute and it's causing hair loss at 21. Haha.
    Ohh, and here's the guide I'm following: http://sampower.ie/windows-7-on-mavericks-via-bootcamp-and-usb/

    your mac seems to think you had installed windows before
    do you have more than 1 partition on your drive, if so, boot camp assistant will not work
    if not, restart your mac and do a pram reset
    open disk utility and repair permissions twice
    open bca and try again

Maybe you are looking for