Cisco Communication Manager Cluster Licence Issue

Dear forum participants,
In my network I have cucm 9.1.2 with the license for 180 phones. I plan to buy the server and CUCM 9 and to make a cluster. please, tell me, what else licenses I need to buy.

There is no longer a server node license, so nothing. It's important to understand that you actually have USER licenses, not device/phone licenses. The UCL/UWL license is consumed by an End User account based on the capabilities/products they are consuming. If you fail to properly associate a device to an end user it will consume a user license all on it's own. For many users who have more than one capability, this wastes licenses. For example, UWL Standard also entitles a customer to a CXN mailbox; however, if the phone isn't set with the correct Owner User ID that matches the alias of their mailbox, two licenses will be consumed instead of one.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps9156/product_solution_overview0900aecd806cc7a4.html
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

  • Cisco Unified Communications Manager Attendant Console issue with cucm ver 9.1.1

    Dear support,
    As we used before Cisco Unified Communications Manager Attendant Console with CUCM version 7.x as now we upgrade to version 9.1.1 and we could not be able to use this service .due to attendant console is not available with cucm versio 9.1.1.
    before upgrade cucm ver 7.x  from PC user maintain all contact details store with Attendant console software on his desktop PC.  right now its give error unable to connect to the server. due to attendant console is not available with cucm version 9.1.1.
    So how i can retrieve the user store contact details from attendant console software from his PC desktop .
    so please provide you feedback highly appreciate.
    Regards
    syed

    Dear support,
    As i check this on user  pc c:\program files\cisco\Unified Communications Manager Attendant Console\data\GlobalSettings.xml
    I couldn't  be able to retrieve the store contact data .most of the user are get effected by this service. 
    As we do upgrade to cucm versioun 9.1.1 to use of more services but not user are to be get effect by the attendant  services like we can't use Attendant console software on CUCM 9.1.1 after upgrade......
    so please advice ........... atleast we need to retrieve the user store contact data ...
    Highly appreciate for your resposne .....
    regards
    syed

  • Ideas on adding licenses to a 8.X Communications Manager cluster before upgrade to v10.

    Hi, hope is all well. This is something I started working with my global Cisco reseller but it takes sometime I wanted to make sure I see different options if possible to present. My company has deployments of collaboration products mainly on v8.x (all three main 8.0.2, 8.5.1 and 8.6.2) going to v10 during this year. Some already run on UCS but some are on MCS and will be late in migration. For those late, there are some growth need in end user/phone deployment but since v8 is end of sale, my provider may not be able to sell licenses.
    If this is true, they might offer to buy v10 licenses with software subscription just like new deployment, which is not too bad at all since we will use this added amount on future v10 upgrade, but has anyone ever did that? I am afraid we use v10 PAK (if possible) to generate v8 license file, will render it not upgradable later. Reasoning is, let's say there is 1000 licenses on v8 with UCSS and we buy 15 v10 licenses downgraded to v8. Once we processo v8 to v10 upgrade on PUT, Cisco might see only 1000 original v8 liceses to provide upgrade instead of 1015.
    Does it make sense or am I missing something here? Thank you very much for any suggestions.

    UCSS and CUCM 8.X licenses have both been EoL. Even the existing UCSS+ ESW has been converted to SWSS.
    Ref: CUCM 8.X Device and Licenses EoL notification
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-732309.html
    Customers may be able to continue to purchase Cisco Unified Communications Manager Version 8.x Phone Units and Device License Units the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
    Product Migration Options
    Customers are encouraged to migrate to the Cisco Unified Communications Manager v 9.2 or later.
    Ref: UCSS EoL
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-software-subscription/eos-eol-notice-c51-732026.html
    -Terry
    Please rate all helpful posts

  • OVM Manager cluster construct issue

    Hi Guys,
    I'm trying to build a demo insfrastructure for Oracle VM for SPARC with Oracle VM Manager for managment. Here is an overview of my infrastructure:
    - 2 T5220 with same configuration (2 x 32 core CPU, 32 Go RAM)
    - 1 ESX VM hosting Oracle VM Manager with Oracle Linux 5 as OS.
    ## For OVM Server for SPARC ##
    ldm -V
    Logical Domains Manager (v 3.1.1.0.5)
            Hypervisor control protocol v 1.7
            Using Hypervisor MD v 1.4
    System PROM:
            Hypervisor      v. 1.10.7.      @(#)Hypervisor 1.10.7.f 2013/08/09 19:14\015
            OpenBoot        v. 4.33.6.      @(#)OpenBoot 4.33.6.e 2014/01/14 15:19
    ## For OVM Manager ##
    Version: 3.3.1.776
    ovs-agent for SPARC version: 3.3.1-b776
    I try to built a HA environment using ovm manager. Every thing is good until I try to add server to server pool. Add the first server is OK, but it stays on error state because of a cluster construct error.
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: create_cluster to server: ovmsrv01 failed. OVMAPI_4004E Sync command failed on server: 192.168.25.250. Command: create_cluster, Server error: org.apache.xmlrpc.XmlRpcException: :(22, 'Invalid argument') 
    Caused by: com.oracle.ovm.mgr.api.exception.ServerOperationException: OVMAPI_4004E Sync command failed on server: 192.168.25.250. Command: create_cluster, Server error: org.apache.xmlrpc.XmlRpcException: :(22, 'Invalid argument') 
    The second server can't be add to the pool until the first one issue is fixed! I'm confuse. Have I use good version for each package? I'm looking for a compatibility matrix between Manager, osv agent and ovm server for sparc, If any one can redirect me to a relevant web page ou doc!!!
    Somebody can point me to a solution?
    Thank a lot!

    HI All,
    Here is the complete fail message when trying to add a node to server's pool:
    10:36:07,369: Starting operation 'Server Cluster Construct' on object '[ServerDbImpl] e7:e6:aa:63:ee:85:c2:3d:d6:80:b3:33:28:aa:1a:d3 (ovmsrv02)'
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: create_cluster to server: ovmsrv02 failed. OVMAPI_4004E Sync command failed on server: 192.168.25.251. Command: create_cluster,
    Server error: org.apache.xmlrpc.XmlRpcException: :(22, 'Invalid argument')

  • Cisco Communications Manager 9.1 - Simple Call Record

    I've been asked to provide a report of calls to and from an extension from a cisco desk phone.  This report does not need to be elaborate.  Date, Time and caller ID is sufficient.  I'm unable to find in the UCM where I can accomplish this.  Any assistance would be appreciated.  TIA

    That is as simple as it gets with the CUCM....  Not sure what else you are looking for here.  You go into the CDR page, put the extension you want to view and the range of dates and hit submit then it provides a graph of time, date, and called/calling number.  Java's answer is the best you are going to get without some third party solution.

  • Cisco Communications Manager 9.1

    We have a CCM installation on a UCS chasis.  Can someone tell me how to find the serial number of the CCM installation?
    TIA

    Hi,
    from vsphere, on the VM host IP click on, configuration .---processors
    Under System ---service tag , you can find serial number of UCS chassis.
    regds, aman

  • Cisco Interaction manager (Web Chat) issue

    Dear All 
    We are facing an error in CIM 4.4.1 that only one of the agents cannot handle more than two chats. We have set the value of maximum chat per agent to Four.
    we have configured only one department and one queue. Rest of agents are getting chats normally. Anyone experienced and got its fix.

    Hi laranoueir
    I did not try integration however i saw the procedure of integration (CIM with UCCE) in the installation guide of CIM. You can check that guide, if do not find it in your guide let me know i will share guide with you.

  • Important Updates Required for CIsco Unified Communications Manager Versions 7.1 - 9.1

                       Folks,
    I recently received an Email our Cisco SE letting us know about a specific security hole in CUCM that I figured that you  might be interested in:
    As your account team, we wanted to make you aware of an important update to Cisco Unified Communications Manager that addresses a security flaw discovered on June 6th.  This flaw, if unpatched, could allow a remote attacker to gain access to your Communications Manager. Cisco has released a Cisco Options Package (COP) file for each of the affected versions to mitigate the vulnerability.  The updated COP file, cmterm-CSCuh01051-2.cop.sgn, is available on CCO for download now and is located under the Utilities section of the software downloads page for each of the affected versions. 
    The full details of this vulnerability can be found in the security advisory page: cisco-sa-20130717-cucm - Multiple Vulnerabilities in Cisco Unified Communications Manager. If you have issues downloading the update file or questions about the vulnerability, please don't hesitate to contact your account team so we can assist in you getting access to this.

    Hi Craig,
    From the ReadMe;
    Installation Instructions:
    As with any installation or upgrade, it is recommended that you apply this Update during off peak hours.
    When applying this Update be advised that a clusterwide reboot is required.
    This update must be installed on all machines in the cluster before the cluster is rebooted.
    Installation to all machines in the cluster is required; you must start with the Publisher. After the Update has been applied
    to all servers you will need to reboot the entire cluster.  See
    Rebooting the Cluster for detailed instructions.
    This package will install on the following System Versions:
    7.1.3.10000
    xx or any higher version starting with 7
    .1.3.xxxxx
    7.1.5.10000
    xx or any higher version starting with 7.1.5.xxxxx
    8.5.1.10000
    xx or any higher version starting with 8.5.1.xxxxx
    8.6.2.10000
    xx or any higher version starting with 8.6.2.xxxxx
    9.1.1.10000
    xx or any higher version startin
    g with 9.1.1.xxxxx
    http://www.cisco.com/web/software/282204704/18582/ReadmeForBlindSQLinjectionCOPfile.pdf
    Cheers!
    Rob

  • Ask the Expert : Call Recording with Cisco Unified Communication Manager (UCM)

    Welcome to the Cisco Support Community Ask the Expert conversation.  This is an opportunity to learn and ask questions about Cisco Unified CM call recording solution that provides the ability to record customer conversations for compliance purpose. This topic will cover an overview, configuration and troubleshooting of the call recording feature.
    Monday, January 19th, 2015 to Friday, January 30th, 2015
    Harmit Singh is a technical leader with the High Touch Technical Services (HTTS) and Technical Assistance Center (TAC) Unified Communications teams based in Bangalore. He has broad experience in Cisco Unified Communications infrastructure solutions. He has 10 years of experience working with large enterprise and service provider networks. He also holds CCIE certifications (#20012) in Voice and Collaboration as well as Red Hat and VMware certifications.
    Mohammed Noorulla Khan is a customer support engineer in High-Touch Technical Services (HTTS)  Unified Communications teams based in Bangalore. His areas of expertise include Cisco Unified Communications Manager, Gateways, and Jabber. He has over 6 years of industry experience working with large enterprise and service provider networks. He also holds CCIE certifications (#35741) in Voice and VMware certifications.
    ** Remember to use the rating system to let Mohammed and Harmit know if you've received an adequate response.  **
    Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video  community, subcommunity, IP Telephony, shortly after the event. This event lasts through January 30th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

    Hi Maheshwar,
    Thank you for your query. Please find my response below:
    1> Do we support recording with HCS environment and which 3rd party vendors are validated with HCS based call control 10.1.1?
    Answer: Whether you use a standalone UCM cluster, UCCE or HCS, call recording would be supported across the board in the same manner.
    Please refer to the following link:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1/Install_and_Config/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs/CHCS_BK_ICC270D0_00_installing-and-configuring-cisco-hcs_chapter_011.html#CHCS_RF_T1105284_00
    Option
    Notes
    Recording
    All Recording applications that are supported by Unified CCE are supported on HCS for CC. For details, see Recording section in Agent and Supervisor Capabilities.
    With respect to which 3rd party vendors have been validated, marketplace.cisco.com is a good place to crosscheck this info. You will find a Cisco Compatible Logo against the partners listed there. The logo is used to signify that the PARTNER product has undergone technical interoperability testing with the Cisco product specified. The interoperability testing is conducted by a third party laboratory based on testing criteria set forth by Cisco. PARTNER is solely responsible for the support and warranty of its product. Placement of the PARTNER product or information pertaining thereto, on the Cisco Marketplace website does not constitute an offer to sell the PARTNER product in any way. For further information on the PARTNER products, please visit the PARTNER company website.
    Please refer to the following link and use the search field under Collaboration Technology:
    https://marketplace.cisco.com/catalog/search?utf8=%E2%9C%93&search[q]=&search[technology_category_ids]=23%2C24%2C197%2C1940%2C1941%2C1921%2C1576%2C1897%2C1983%2C2418%2C26%2C198%2C1904&search[order]=tier&per_page=20&_=1421663854257&ts=1421663855441
    2> Which end points are supported for recording via HCS call control?
    Answer: The following link should help clarify this:
    http://solutionpartner.cisco.com/web/sip/wiki/-/wiki/Main/Unified+CM+Silent+Monitoring+Recording+Supported+Device+Matrix
    Please let us know if you have any follow up questions. Hope this is helpful.
    Regards,
    Harmit Singh.

  • Broken Cisco Unity / Unified Communications Manager association

    We have several Cisco Unity Connection users with the following status in their profiles:
    "This user's association to the co-resident Cisco Unified Communications Manager user has been broken.
    Please Click Here to reassociate the orphaned user."
    Clicking on the reassociation button does not show any of the users with broken associations, just a few resource users.
    Is there any way to reassociate these users with CUCM without having to delete them in Unity Connection along with their mailboxes?

    These are the steps I took to resolve the issue. I was particularly concerned about users losing saved messages in their voicemail. The posted solution did not give much detail on what to do.
    1) Create a new user in CUCM. For example, I have a user called 'John Doe' in the system. I created a new one called 'John Doe2'.
    2) After creating the user I associated 'John Doe2' to the phone in use by 'John Doe'. Then I set the Primary Extension as needed for that user. Hit the 'Save' button and verify that the 'Create Cisco Unity User' option shows up in the drop-down box in the right hand corner.
    3) Log into Cisco Unity Connection Administration, and select 'John Doe'. Click on the link to re-associate and select 'John Doe2'. This links the Unity user to the CUCM user.
    4) Log back into CUCM and select 'John Doe' from the user list. Remove all device associations from the user. Hit Save, then delete the user.
    5) Select 'John Doe2' and rename the user as 'John Doe'.
    These steps fixed my problem. I had to do it for all the users whose association was broken. One note to make is that the voicemail PIN is automatically reset to the default I believe, which is 0000. Other than that voicemail continues to work normally and users don't have to redo their greetings and such.

  • Cisco Unity Connection cluster issue

    Hello,
    I have a Cisco Untiy Connection cluster of two servers, one publisher and one subscriber.  They are running software: 7.1.3ES43.33034-43.  Yesterday at about 8:43 I lost connection to the subscriber server.  I could still ping it but was unable to get to it via GUI nor SSH.  I spoke to TAC yesterday and they told me to simply reboot the server.  I was a little concerned about this because I don't want to cause some kind of split-brain effect.  I work in a hospital and it is imperative that the voicemail system stay up.  My only other option would be to do this at 4:00 am on a Sunday.  Any suggestions?
    Thanks

    Hi David and all,
    we have a unity connection 9.x pair. after an IP address change on the subscriber we are getting the error message:
    ‘Communication is not functioning correctly between the servers in the Cisco Unity Connection cluster’
    Both servers respectively show its own status as a publisher but lost communication with the other server (if we check cluster management from either server).
     show tech network hosts – displays correct info.
    show perf query class "Number of Replicates Created and State of Replication"
    ==>query class :
     - Perf class (Number of Replicates Created and State of Replication) has instances and values:
        ReplicateCount  -> Number of Replicates Created   = 603
        ReplicateCount  -> Replicate_State                = 2
    On both servers the replication is showing as 2 – so its good.
    Various reboots have been done, services are up and working and there are no firewalls between server’s .
    Any advice appreciated.
    TIA…Jeff

  • Cisco Unified Communications Manager Group configuration

    Cisco Unified CM Administration -  System version: 7.1.5.10000-12
    Cluster has 2 CUCMs: CM voip1 and CM voip2.
    CM voip1 is the publisher and CM voip2 is the subscriber.
    When adding a new group, just one CUCM (CM voip1) is shown available for selection on dropbox "Available Cisco Unified Communications Manager".
    I want two options for Cisco 2811.
    What I must configure to have both CUCMs on the dropbox?
    Thanks
    Rosa

    admin:utils dbreplication status
    -------------------- utils dbreplication status --------------------
    Replication status check is now running in background.
    Use command 'utils dbreplication runtimestate' to check its progress
    The final output will be in file cm/trace/dbl/sdi/ReplicationStatus.2013_02_08_19_59_27.out
    Please use "file view activelog cm/trace/dbl/sdi/ReplicationStatus.2013_02_08_19_59_27.out " command to see the output 
    admin:utils dbreplication runtimestate
    DB and Replication Services: ALL RUNNING
    Cluster Replication State: Only available on the PUB
    DB Version: ccm7_1_5_10000_12
    Number of replicated tables: 427
    Cluster Detailed View from SUB (2 Servers):
                                   PING              REPLICATION    REPL.    DBver&     REPL.    REPLICATION SETUP
    SERVER-NAME    IP ADDRESS      (msec)    RPC?    STATUS         QUEUE    TABLES     LOOP?    (RTMT)
    voip1    147.65.21.110    0.156    Yes    Connected    0      match    Yes      (2)
    voip2    147.65.21.120    0.022    Yes    Connected    0      match    Yes      (2)
    admin:
    Processing ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_410_devicenumplanmapremdestmap with 0 rows group 11
    ------   Statistics for ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_410_devicenumplanmapremdestmap ------
    Node                  Rows     Extra   Missing  Mismatch Processed
    g_voip1_ccm7_1_5_10000_12         0         0         0         0         0
    g_voip2_ccm7_1_5_10000_12         0         0         0         0         0
    Processing ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_409_devicenumplanmapendusermap with 0 rows group 11
    ------   Statistics for ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_409_devicenumplanmapendusermap ------
    options: q=quit, n=next, p=prev, b=begin, e=end (lines 2961 - 2980 of 3006) :
    Node                  Rows     Extra   Missing  Mismatch Processed
    g_voip1_ccm7_1_5_10000_12         0         0         0         0         0
    g_voip2_ccm7_1_5_10000_12         0         0         0         0         0
    Processing ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_403_batjobresults with 0 rows group 11
    ------   Statistics for ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_403_batjobresults ------
    Node                  Rows     Extra   Missing  Mismatch Processed
    g_voip1_ccm7_1_5_10000_12         0         0         0         0         0
    g_voip2_ccm7_1_5_10000_12         0         0         0         0         0
    Processing ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_402_batinputdatajobmap with 0 rows group 11
    ------   Statistics for ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_402_batinputdatajobmap ------
    Node                  Rows     Extra   Missing  Mismatch Processed
    g_voip1_ccm7_1_5_10000_12         0         0         0         0         0
    g_voip2_ccm7_1_5_10000_12         0         0         0         0         0
    Processing ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_401_batfileinfojobmap with 0 rows group 11
    options: q=quit, n=next, p=prev, b=begin, e=end (lines 2981 - 3000 of 3006) :
    ------   Statistics for ccmdbtemplate_voip1_ccm7_1_5_10000_12_1_401_batfileinfojobmap ------
    Node                  Rows     Extra   Missing  Mismatch Processed
    g_voip1_ccm7_1_5_10000_12         0         0         0         0         0
    g_voip2_ccm7_1_5_10000_12         0         0         0         0         0
    end of the file reached

  • Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)

    Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1. 
    This is a continuation of the live Webcast
    Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
    During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
    Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification. 
    Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
    Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.  
    Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community   forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
    Webcast related links:
    Webcast Video
    FAQ from the live webcast
    Slides from the live webcast

    Hello Robert,
    Apologies for a delayed response, some days get very hectic.
    In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
    The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
    You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
    http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
    For Example: SRST version 7.1
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
    You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
    If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
    Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
    It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
    Please, let me know if this clarifies your doubt or we can have a quick phone call.
    Regards
    Amit Singh

  • Cisco Call Manager replication issue

    Hello
    We are running a cluster of 3 servers with Cisco Call Manager version 6
    I have noticed that the replication status is 3 on all servers and from the CM Database Status I can see  queue of updates are stuck
    I have restarted Pub and one Sub but the status is still 3 and queue status is still the same
    Is there anything I can do to make it work?
    Thank you 

    Thank you,
    I will try them tomorrow, but I thought restarting the servers will also reset the replication
    Btw, there was a time difference on the servers due to NTP failure and I have just noticed that Pub can not see one of the Subs, the replication status is 0 and
    g_cucs01_ccm6_1_2_1000_13 2 Active Connected 0 Sep 15 10:21:37
    g_cucs02_ccm6_1_2_1000_13 11 Active Connected 0 Sep 15 10:35:19
    g_cucs03_ccm6_1_2_1000_13 19 Active Dropped 92939 Aug 20 07:51:14
    g_cucs08_ccm6_1_2_1000_13 18 Active Local 0

  • Connectivity Issue between ASA 5520 firewall and Cisco Call Manager

    Recently i have installed ASA 5520 firewall, Below is the detail for my network
    ASA 5520 inside ip: 10.12.10.2/24
    Cisco Switch 3560 IP: 10.12.10.1/24 for Data and 10.12.110.2/24 for Voice
    Cisco Call Manager 3825 IP: 10.12.110.2/24
    The users and the IP phone are getting IP from the DHCP server which configured on cisco 3560 Switch.
    the Default Gateway for Data user is 10.12.10.2/24 and
    for the voice users is 10.12.110.2/24
    now the problem is that the users is not able to ping 10.12.110.2 call manager. please if somebody can help in this regard. i will appreciate the prompt response against this issues.

    Actually i don't wana to insert new subnet and complicate the nework. i need a simple way to solve the problem. below is the details for the asa 5520 config.
    ASA Version 8.2(1)
    name x.x.x.x Mobily
    interface GigabitEthernet0/0
     nameif inside
     security-level 99
     ip address 10.12.10.2 255.255.255.0
    interface GigabitEthernet0/1
     nameif outside
     security-level 0
     ip address x.x.x.x 255.255.255.252
    object-group service DM_INLINE_SERVICE_1
     service-object tcp-udp
     service-object ip
     service-object icmp
     service-object udp
     service-object tcp eq ftp
     service-object tcp eq www
     service-object tcp eq https
     service-object tcp eq ssh
     service-object tcp eq telnet
    access-list RA_VPN_splitTunnelAcl_1 standard permit Inside-Network 255.255.255.0
    access-list RA_VPN_splitTunnelAcl standard permit Inside-Network 255.255.255.0
    access-list inside_nat0_outbound extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
    access-list inside_nat0_outbound extended permit object-group DM_INLINE_SERVICE_1 10.12.10.16 255.255.255.240 Inside-Network 255.255.255.0
    access-list inside_nat0_outbound_1 extended permit ip Inside-Network 255.255.255.0 10.12.10.16 255.255.255.240
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu mgmt 1500
    ip local pool VPN-Pool 172.16.1.1-172.16.1.30 mask 255.255.255.0
    ip local pool VPN-Users 10.12.10.21-10.12.10.30 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-641.bin
    asdm history enable
    arp timeout 14400
    global (inside) 2 interface
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound_1
    nat (inside) 1 Inside-Network 255.255.255.0
    route outside 0.0.0.0 0.0.0.0 Mobily 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http Mgmt-Network 255.255.255.0 mgmt
    http Inside-Network 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
     authentication pre-share
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto isakmp policy 30
     authentication pre-share
     encryption 3des
     hash md5
     group 2
     lifetime 86400
    telnet Inside-Network 255.255.255.0 inside
    telnet timeout 5
    ssh Inside-Network 255.255.255.255 inside
    <--- More --->              ssh timeout 5
    console timeout 0
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy RA_VPN internal
    group-policy RA_VPN attributes
     dns-server value 86.51.34.17 8.8.8.8
     vpn-tunnel-protocol IPSec
     split-tunnel-policy tunnelspecified
     split-tunnel-network-list value RA_VPN_splitTunnelAcl
    username admin password LPtK/u1LnvHTA2vO encrypted privilege 15
    tunnel-group RA_VPN type remote-access
    tunnel-group RA_VPN general-attributes
     address-pool VPN-Users
     default-group-policy RA_VPN
    tunnel-group RA_VPN ipsec-attributes
     pre-shared-key *
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:e5a64fa92ae465cd7dabd01ce605307d
    : end

Maybe you are looking for