Cisco Connect Express app

for iPad / iPhone is available only for US customers, not for rest of the world. Reason??? Ideas??? Hints???
Solved!
Go to Solution.

After several requests from Cisco USA and Canada, I guess its not worth the download. Shame on Cisco for not giving the iPhone/iPod app to Canadian's. I really enjoy the hardware......

Similar Messages

Cannot Install Cisco Connect Express App On My Android Phone

I have a Nexus S running Ice Cream Sandwich (4.0.3), and whenever I go to the Android Marketplace to install the Cisco Connect Express App on my phone I get this error message: "This app is incompatible with your Samsung Nexus S. This item cannot be installed in your device's country." I live in Canada, and I have an E3000 router that I bought in Canada, so I do not understand why I am unable to install this app.

Well, you can try to update the Android 4.0.3 Ice Cream Sandwich which may help you. Here is the link give to upgrade: http://www.zdnet.com/blog/hardware/install-android-403-ice-cream-sandwich-on-your-nexus-s-now/17340
Else you can try to install the Cisco Connect Express in any order Android smart phone and check whether it is getting installed or not.

Cisco Connect Express - Wont Connect

Sp I DL'ed the Cisco Connect Express app to my Android phone and have tried and tried to connect to my E4200 v2 router, but it won't connect. My wireless radio is connected to the E4200 v2 with WPA2, but nothing I do will make it work. Any suggestions??

You can follow the steps below.
* Make sure the channel is not set to auto.
* Power off your android device, then power on again.
* Disable then re-enable the Wifi feature of your device.
* Try to connect again using Cisco Connect Express.

Cisco Connect Express - IPhone App

Where is the iPhone app cisco express apple store doesn't have it

Cisco Connect Express is a free application for your iPhone® or iPod®. It allows you to connect devices to your wireless network in the comfort of your phone. In cases where in your router is out of reach, you can use the WPS feature on your iPhone® to connect your wireless devices to your network.
Here is the link where you can try to download the Cisco connect Express: http://www.addictivetips.com/mobile/cisco-connect-express-manage-router-settings-remotely-android-io...

Cisco Connect Cloud - Apps for Windows Phone.

Are you planning to make apps for windowsphone?

Hi! So far, what's indicated on cisco's site is that the mobile apps are only available for iOS and andoid only. But I came across this site: http://news.cnet.com/8301-17938_105-57460150-1/cisco-woos-developers-adds-802.11ac-support-as-connec... and quoting one sentence: "Cisco says this is just the beginning and that there will be hundreds of mobile apps that take advantage of the Cisco Connect Cloud platform, making home networking not just more convenient to use but also more fun and offering features that many people may not have imagined possible before." With this statement, cisco might develop cisco connect cloud apps for windows phone.

Cisco AnyConnect VPN app on iPhone 4s won't connect

I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
Thanks

Although I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community.

Migrating from Cisco Unity Express to Cisco Unity Connection

Hello,
We are going to migrate from Cisco Unity Express 8.6.6 to Cisco Unity Connection 9.1.2. Therefore, we need to migrate all mailboxes without data lost.
So, the questions are next: is it possible? Which tools we should use and what steps we need to pass?
Thanks,

Based on my experience of keeping the data (i.e. voicemails for users) it is really not worth it.
Because all these voicemails will add up the Mailbox Space and user will get unnecessary "mailbox full" warnings even though they may be deleted (it takes around 2 weeks to get rid of the deleted voicemails)
Hence, my recommendation would be to do a stare and compare for the most part and build all the Call Handlers etc, this will give you even better chance to get rid of all the unwanted stuff.
HTH

Can't access Cisco Connect app since I've upgraded to Mac Mountain Lion

I've been searching for a while to resolve this and can't find any new software downloads for my Valet (M10). Ever since I upgraded to Mountain Lion, the Connect app doesn't work. Is there a place I can download an update?
Thanks.

Unfortunately, there’s no available update yet for Cisco Connect for Mac Mountain Lion. The Linksys website shows that it is compatible with the Mac Lion. I have been waiting for the Mac Mountain Lion update, too. We can only wait then for the update to be posted. For now, you can make use of the router’s user interface (http://192.168.1.1) should you need to make changes on it such as the wireless settings.

E1200 V2 upgraded to OS 10.8.2, Cisco Connect unsupported OS, also update firmware?

I purchased myu E1200 Jan 2012. Have been intermittent loss of connection & not sure whether it is old cable modem or router or? ISP came out & checked & changed some cable fittings said looked ok, but could be my old modem. (I'm getting ready to move out of area so don't want to buy a new modem now). But also a lot of my neighbors w Cox report intermittent loss of connection.
I will get messages saying I'm not connected to internet. Usually if i go up & turn off wireless & then turn it back on, it will search & find my router. Frequently though I notice that when I check it has switched to my guest rather than primary for some reason.
I was having some of this before I even went to wifi a yr ago.
Just upgraded to Mountain Lion a couple weeks ago or so. Last night computer had a panic. I received advice to make sure all software as well as router firmware up to date. Found & updated MacBookPro Firmware update. Backed up.
Opened CiscoConnect & got message unsupported Operating System.
Reading about upgrading firmware, saw warnings about doing it hard wired or it could permanently damage router. Because of the intermittent connectivity problems & the warning, I think I would be safest to do this manually by downloading it 1st & then updating the firmware from the download.
I see that instructions say to determine Firmware version. & it also says it will ask for router IP address. I'm guessing all that was in Cisco Connect. I know it has my passwords, but now I can't get to it. It also says I can use the web set up page to get the current firmware version. For updates (but it says for pc) it shows 8/2011 & 8/2012. Since mine was purchased in 1/2012 & unless it self updated, I'm guessing it is running the 8/2011 firmware. But just noticed in the User Guide it says that when I run Cisco Connect it checks for updates & installs them. But that's kind of interesting w all the warnings about running it w a wired connection to make sure no interruptions. Not sure how I have it set up, but I usually set software updates to prompt me so I can control when they actually run.
Once I have gotten that, will I be able to manually download the appropriate firmware version? Or if I click on that, will that start a set up or update process?
If I download Cisco Connect, will it update the already installed version, keeping all my existing info? & then will that be compatible w Mountain Lion & then show me whether the firmware needs to be updated?
Kathi

But anyway, I can't even open the old version!!! I just get a message about unsupported OS! So kind of hard to uninstall if I can't open it.
& for some reason when I was installing Mountain Lion, upgrading from Snow Leopard it found an old version of Parallels which I knew was not compatible. Didn't even think about this.
Its sort of working but something is not working very well. I sure wish I hadn't listened to those who said to save the $ & not get the Apple Airport Express. Their stuff works & its not hard to set up like this!
This is SO LAME!!!
& Where is lists the info, I have so far found NO INFO about updating. I usually have my software set to notify me so I control when it updates. & I think the last times I was in Cisco Connect it was under pressure just trying to get the router working again.
Right now I feel like throwing it at something.
Well, I have twice tried to download from the list for my model & when I click on the set up icon I get a message that "Setup" is damaged and can't be opened. You shold eject the disk image." But when I click for more info it says:
The app has been modified or damaged
The app’s code does not match the original code that was signed. The app has been modfied, or it may be broken or corrupted or have been tampered with. If you feel that an app has been damaged or tampered with, you should delete it by dragging it to the Trash.
Some apps and tools, such as AppleScript applications and some legacy tools, modify themselves after signing. These types of apps cannot be opened unless the Gatekeeper settings in the Security & Privacy preferences is set to “Anywhere.”
Open the General pane of Security & Privacy preferences
For more information about protecting your Mac from harmful software, see this help topic:
Protect your Mac from malware
Kathi

Unable to create a notification for a group (Cisco Unity Express 3.2)

There is Cisco ISR 2821 with CME 7.1 and Cisco Unity Express 3.2.
I am trying to create notifications for a group named AAA in CUE.
I do following (GUI):
1. Go to Configure -> Groups
2. Click on the group name AAA.
3. In Group Profile window 'Enable notification for this user/group' option is enabled.
4. Go to Mailbox tab. There is an associated mailbox with ticks against Enabled and Fax Enabled.
5. Go to Notification tab and see the warning:
No Notification Devices found for User/Group
Also, there are another several groups on this system and I am able to turn notification on for them. These groups have the same owners and members that AAA has. Moreover, if I create a new group and set it up absolutely the same as AAA, I can turn notifications on for it.
The problem in this way is that we have our custom greetings and after I created a new group, for example BBB, with the same settings (as AAA, inluding Primary Extansion and Primary E.164 Number) and remove these numbers from AAA, then it works and users would receive notification about new voice messages. BUT, when I call BBB I listen to standart Cisco greeting promts.
I don't undestand why it happens, because all these greetings are determined in Voicemail -> Auto Attendant section and I did not any changes here at all.
How can I fix this 'notification' problem?
Thanks.

Process with success:
unzip the packet in: C:\APEX
1. Install:
@apexins SYSAUX SYSAUX TEMP /i/
2. Change to password:
@apxchpwd,
3. Run apex_epg_config.sql
On windows:
@apex_epg_config.sql (page 30, the guide of intallation)
Important:Replace SYSTEM_DRIVE:\TEMP by C:
E.g.: @apex_epg_config C:
After this, follow the next steps
4. ALTER USER ANONYMOUS ACCOUNT UNLOCK;
Finish! Just execute apxldimg.sql script if you is upgrading from a preview release.
Now try the connect on the browser IE6 o later:
http://localhost:8080/apex/apex_admin
Then create your workspace.
Edited by: [email protected] on 10/03/2009 11:59

Can Cisco Connect be password protected?

I set up a E3200 today for a friend who has a small business. He has 6 staff in his office where it is installed.
I installed it using the web interface for the router, but wanted to show him how to change the guest password using the Cisco Connect software. He also wanted to block Facebook and a couple other time-wasting sites with the parental controls.
When we started Cisco Connect, we were both shocked to see that the guest and private wireless password were viewable from the main screen with just a click or two through different windows. No where did it prompt us for a password to enter the setup portions.I understand that you have to be on the LAN to get access to this, but this means that if any of his staff are computer savvy, they could hit the Linksys website themselves and download the Cisco Connect software and make any changes they want.
Is there a way to protect the router from unintended changes from someone using the Cisco Connect software?

In my opinion, this seems to be a HUGE security issue.
If I knew someone was using a Linksys router in a small office, and I wanted to hack it. All I would do is put Cisco Connect on a laptop, walk in to that office, find an open network port and connect my laptop to it. I could capture all the security settings and then leave and come back later to get on their wifi network.
I understand about physical security, social engineering, and all that. I just cant believe that the passwords to the router / wifi are freely accessible through a software app which requires no authentication to get in to. Seems like a very half-baked application.

MSE and Zones (Cisco Connected Mobile Experience)

Hello everybody,
I am trying to do Cisco Connected Mobile Experience work using Cisco Prime 1.3, MSE 7.4, WLC 7.4 (everything virtual appliance) and Meridian App.
It is working well, but although I have configured some zones on Cisco Prime, it is not shown on MSE and Meridian.
What can be happening? Why aren't zones shown?

Dear andre.ortega,
we have similar project.
And may be you can help me, geting answers for my questions.
1. MSE v 7.5 will support navigation features. Can MSE output this information via API to Mobile Apps?
2. did u investigate other solutions for mobile apps then Meridian?
thank you.

Downloaded Cisco Connect for E1200 v2 disk image damaged. Now what? recent Mountain Lion upgrade

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.
After a Panic last night I was advised to make sure everything updated including router firmware.
When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.
So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.
So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
I'm running on a mid April 2010 13" MacBookPro
Any suggestions? This all is rather confusing.
Kathi

Well I was trying to update Cisco Connect so it would work w Mountain Lion but after 3 tries at the download I kept getting this same error message that it is downloaded. I even shut down & restarted before the last time w same result.
I should not have to spend hours of my time to get this to work. That is ridiculous.
Right before starting this process I checked for Apple updates & found a firmware update for my MacBookPro. I quickly downloaded & installed it, no problem. It took a very few minutes & then I backed it up & started working on this many hours ago.
I am an end user--not an IT professional. I just want things to work. I should not be expected to have to spend hours trying to figure out how to get stuff to work & still it doesn't. So I guess Linksys doesn't care that much about making things easy for Mac users.
I recently had the cable co come out & check the levels & all. they all checked out ok & they did change the fittings in several places on the coax connecters for good measure.
My cable modem is set up just across my living room from me & it is not a large living room. The router is right next to it, but it is not at a desk or place that is very comfortable to set up my Mac.
I sure hope that those security settings have been set up by default when I orginally set this up about a year ago. & I don't reall know how to change those settings without Cisco Connect, which I have been unable to get reinstalled since i keep getting those warnings about it being damaged.
I just want my computer devices to work. I don't want to have to spend hours troubleshooting them w poorly written instructions that don't really tell how to update firmware & Cisco Connect for tnose of us who have already had it set up before upgrading to Mountain Lion.
Having a link to download Cisco Connect that supposedly works w Mountain Lion but doesn't since it keeps giving a warning is not very helpful. There was nothing I saw in all my searches to tell what the results of even being able to upgrade Cisco Connect. Would it be able to figure existing settings? Didn't see anything that explained how that would work.
I don't appreciate my time being stolen by making it so hard to just get this updated! I"m giving up on this. I may try taking it back to Best Buy to see if they can tell if the router itself was also defective but I think I will likely go get an airport Express so I have a reliable router that is easy to use!
Kathi

How to add our own applications to Cisco Connect Cloud?

How to add our own applications to Cisco Connect Cloud?

You might find this interesting.
http://newsroom.cisco.com/press-release-content?type=webcontent&articleId=926074
Interested developers are invited to visit the Linksys Developer Community at http://developer.cisco.com/web/ldc to register and develop apps for Linksys Smart Wi-Fi Routers. Cisco empowers developers with technical, marketing, and sales resources to help support every phase of their developmental and business cycles.

Cisco Unity Express 8 settings for VM to Email O365

At my current location we are using Cisco Unity and I have it configured correctly with Office 365 to allow users VM to be sent to their email. At a new office being set up, they opted to use Cisco Unity Express. Now CUE does not have the same settings to connect directly to the hosted exchagne server that CU does. CUE is wanting SMTP connection info. We have CUE working fine with a GMail account for testing, but when we try to use the settings given my MS for SMTP we get an error that we cannot connect to the SMTP server?
Server: *.outlook.com
SSL, port 587
User: same user account we use for CU [email protected] and same passoword.
I have been reading that CUE is compatible with O365 and the above should be correct. Am I missing something?

In order to support TTLS/SSL you need CUE 8.6:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/administrator/AA_and_VM/guide/syscmp.html#wp1014185
Also, there is a limitation on what hosted Email Servers, CUE can use:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#wp364157
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Cisco Connect Express app

Similar Messages

Maybe you are looking for