Cisco Connect Express - Wont Connect

Sp I DL'ed the Cisco Connect Express app to my Android phone and have tried and tried to connect to my E4200 v2 router, but it won't connect. My wireless radio is connected to the E4200 v2 with WPA2, but nothing I do will make it work. Any suggestions??

You can follow the steps below.
* Make sure the channel is not set to auto.
* Power off your android device, then power on again.
* Disable then re-enable the Wifi feature of your device.
* Try to connect again using Cisco Connect Express.

Similar Messages

Migrating from Cisco Unity Express to Cisco Unity Connection

Hello,
We are going to migrate from Cisco Unity Express 8.6.6 to Cisco Unity Connection 9.1.2. Therefore, we need to migrate all mailboxes without data lost.
So, the questions are next: is it possible? Which tools we should use and what steps we need to pass?
Thanks,

Based on my experience of keeping the data (i.e. voicemails for users) it is really not worth it.
Because all these voicemails will add up the Mailbox Space and user will get unnecessary "mailbox full" warnings even though they may be deleted (it takes around 2 weeks to get rid of the deleted voicemails)
Hence, my recommendation would be to do a stare and compare for the most part and build all the Call Handlers etc, this will give you even better chance to get rid of all the unwanted stuff.
HTH

Cannot Install Cisco Connect Express App On My Android Phone

I have a Nexus S running Ice Cream Sandwich (4.0.3), and whenever I go to the Android Marketplace to install the Cisco Connect Express App on my phone I get this error message: "This app is incompatible with your Samsung Nexus S. This item cannot be installed in your device's country." I live in Canada, and I have an E3000 router that I bought in Canada, so I do not understand why I am unable to install this app.

Well, you can try to update the Android 4.0.3 Ice Cream Sandwich which may help you. Here is the link give to upgrade: http://www.zdnet.com/blog/hardware/install-android-403-ice-cream-sandwich-on-your-nexus-s-now/17340
Else you can try to install the Cisco Connect Express in any order Android smart phone and check whether it is getting installed or not.

Cisco Connect Express - IPhone App

Where is the iPhone app cisco express apple store doesn't have it

Cisco Connect Express is a free application for your iPhone® or iPod®. It allows you to connect devices to your wireless network in the comfort of your phone. In cases where in your router is out of reach, you can use the WPS feature on your iPhone® to connect your wireless devices to your network.
Here is the link where you can try to download the Cisco connect Express: http://www.addictivetips.com/mobile/cisco-connect-express-manage-router-settings-remotely-android-io...

E1200 V2 upgraded to OS 10.8.2, Cisco Connect unsupported OS, also update firmware?

I purchased myu E1200 Jan 2012. Have been intermittent loss of connection & not sure whether it is old cable modem or router or? ISP came out & checked & changed some cable fittings said looked ok, but could be my old modem. (I'm getting ready to move out of area so don't want to buy a new modem now). But also a lot of my neighbors w Cox report intermittent loss of connection.
I will get messages saying I'm not connected to internet. Usually if i go up & turn off wireless & then turn it back on, it will search & find my router. Frequently though I notice that when I check it has switched to my guest rather than primary for some reason.
I was having some of this before I even went to wifi a yr ago.
Just upgraded to Mountain Lion a couple weeks ago or so. Last night computer had a panic. I received advice to make sure all software as well as router firmware up to date. Found & updated MacBookPro Firmware update. Backed up.
Opened CiscoConnect & got message unsupported Operating System.
Reading about upgrading firmware, saw warnings about doing it hard wired or it could permanently damage router. Because of the intermittent connectivity problems & the warning, I think I would be safest to do this manually by downloading it 1st & then updating the firmware from the download.
I see that instructions say to determine Firmware version. & it also says it will ask for router IP address. I'm guessing all that was in Cisco Connect. I know it has my passwords, but now I can't get to it. It also says I can use the web set up page to get the current firmware version. For updates (but it says for pc) it shows 8/2011 & 8/2012. Since mine was purchased in 1/2012 & unless it self updated, I'm guessing it is running the 8/2011 firmware. But just noticed in the User Guide it says that when I run Cisco Connect it checks for updates & installs them. But that's kind of interesting w all the warnings about running it w a wired connection to make sure no interruptions. Not sure how I have it set up, but I usually set software updates to prompt me so I can control when they actually run.
Once I have gotten that, will I be able to manually download the appropriate firmware version? Or if I click on that, will that start a set up or update process?
If I download Cisco Connect, will it update the already installed version, keeping all my existing info? & then will that be compatible w Mountain Lion & then show me whether the firmware needs to be updated?
Kathi

But anyway, I can't even open the old version!!! I just get a message about unsupported OS! So kind of hard to uninstall if I can't open it.
& for some reason when I was installing Mountain Lion, upgrading from Snow Leopard it found an old version of Parallels which I knew was not compatible. Didn't even think about this.
Its sort of working but something is not working very well. I sure wish I hadn't listened to those who said to save the $ & not get the Apple Airport Express. Their stuff works & its not hard to set up like this!
This is SO LAME!!!
& Where is lists the info, I have so far found NO INFO about updating. I usually have my software set to notify me so I control when it updates. & I think the last times I was in Cisco Connect it was under pressure just trying to get the router working again.
Right now I feel like throwing it at something.
Well, I have twice tried to download from the list for my model & when I click on the set up icon I get a message that "Setup" is damaged and can't be opened. You shold eject the disk image." But when I click for more info it says:
The app has been modified or damaged
The app’s code does not match the original code that was signed. The app has been modfied, or it may be broken or corrupted or have been tampered with. If you feel that an app has been damaged or tampered with, you should delete it by dragging it to the Trash.
Some apps and tools, such as AppleScript applications and some legacy tools, modify themselves after signing. These types of apps cannot be opened unless the Gatekeeper settings in the Security & Privacy preferences is set to “Anywhere.”
Open the General pane of Security & Privacy preferences
For more information about protecting your Mac from harmful software, see this help topic:
Protect your Mac from malware
Kathi

How do I get Cisco Connect back?

I bought the Linsky E2000, and after I installed it Cisco Connect was installed too. Someone in my household uninstalled Cisco Connect so now my Linsky gaming adapter wont work so my laptop and PS3 can't go on the internet. How do I get Cisco Connect back?

I gave up on Cisco Connect the same way I did the stock E300 firmware, so it's now moot to me. The one thing I found with the Connect software was that if you make a change to the router setup from the web interface, Connect lis likely to no work anymore.
I was able to get it back a couple of times by changing the XML config file on *all* the machines. Most of the connect testing period, I wound up doing a 30-30-30 reset on the router and reconfiguring from scratch. No more, since I went to TomatoUSB.
FBIG a.k.a. BezantSoft
SOHO Network: E3000 TomatoUSB (1.28.7440 MIPSR2-Toastman E3000 USB Ext); WRT54G (Base Tomato 1.28.1816) as AP; Belkin 150 N+ Gbit Storage Router; HP [email protected] 64bHT W7(32bit)Ult & WinXP Virtual instance. HP [email protected], XPProSP3. IBM [email protected] XPProSP3. DIY P4 [email protected], W7Ult32. HP [email protected], XPProSP3, w 100M, 802.11G, builtins 1G PCMCIA & WUSB600N addon Nics. all running NM 5.5.9195.0-pure0.beta. Hawking PrtSrv 100M to USB. Offline: BEFW11S4, WRT54GC, ADSTech NAS 100Mx500Gb. Son took Xbox360 to college. {sniff!}

Downloaded Cisco Connect for E1200 v2 disk image damaged. Now what? recent Mountain Lion upgrade

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.
After a Panic last night I was advised to make sure everything updated including router firmware.
When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.
So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.
So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
I'm running on a mid April 2010 13" MacBookPro
Any suggestions? This all is rather confusing.
Kathi

Well I was trying to update Cisco Connect so it would work w Mountain Lion but after 3 tries at the download I kept getting this same error message that it is downloaded. I even shut down & restarted before the last time w same result.
I should not have to spend hours of my time to get this to work. That is ridiculous.
Right before starting this process I checked for Apple updates & found a firmware update for my MacBookPro. I quickly downloaded & installed it, no problem. It took a very few minutes & then I backed it up & started working on this many hours ago.
I am an end user--not an IT professional. I just want things to work. I should not be expected to have to spend hours trying to figure out how to get stuff to work & still it doesn't. So I guess Linksys doesn't care that much about making things easy for Mac users.
I recently had the cable co come out & check the levels & all. they all checked out ok & they did change the fittings in several places on the coax connecters for good measure.
My cable modem is set up just across my living room from me & it is not a large living room. The router is right next to it, but it is not at a desk or place that is very comfortable to set up my Mac.
I sure hope that those security settings have been set up by default when I orginally set this up about a year ago. & I don't reall know how to change those settings without Cisco Connect, which I have been unable to get reinstalled since i keep getting those warnings about it being damaged.
I just want my computer devices to work. I don't want to have to spend hours troubleshooting them w poorly written instructions that don't really tell how to update firmware & Cisco Connect for tnose of us who have already had it set up before upgrading to Mountain Lion.
Having a link to download Cisco Connect that supposedly works w Mountain Lion but doesn't since it keeps giving a warning is not very helpful. There was nothing I saw in all my searches to tell what the results of even being able to upgrade Cisco Connect. Would it be able to figure existing settings? Didn't see anything that explained how that would work.
I don't appreciate my time being stolen by making it so hard to just get this updated! I"m giving up on this. I may try taking it back to Best Buy to see if they can tell if the router itself was also defective but I think I will likely go get an airport Express so I have a reliable router that is easy to use!
Kathi

Can I use Cisco Connect if I change the default router IP address?

I am adding my E3000 into an existing network behind a SonicWall firewall. I am using an address scheme of 192.168.168.xxx When I change the router address to 192.168.168.10 and disable DHCP in Cisco Connect, I am left with only being able to access the router through the web interface. This seems pretty lame; I've read other threads on Web vs. Cisco Connect. Is there a quick fix that will allow Cisco Connect to still find the router after I've made (just) these two changes?
--David C

Yes you still will be able to use the Cisco Connect software if you have changed the Routers IP address, But if you change the Router password of Wireless Security then you wont be able to use Cisco Connect software.

Can not connect computer to Cisco Connect -EA3500

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

Reading the manual it says the username is blank, password 'admin'.

Can Cisco connect be used for small business web filtering?

I am searching for a web filtering solution for our small church. The core requirement is to use a hardware-based solution to filter all internet traffic. Our current wiring looks like this: [ISP router] --> [switch] --> [Open Mesh wireless access points]. Can I connect a Linksys EA2700/3500/4500/6500 between the [ISP router] and the [Switch], disable the Linksys wireless, and use Cisco Connect to filter all the internet traffic?
More info: We will only have a handful of wired/wireless devices which we have control over. We expect most of the rest of the traffic to be generally outside our control via personally owned devices connecting thru the public wifi. Therefore any solution which requires installation of software on individual devices will not work.
(If there are other threads on this topic I'd be more than happy to read them, I just couldn't find any.)
Thanks!!

Hey
check this article:
http://www.oracle.com/technology/pub/articles/cunningham-database-xe.html
Regards

Cisco Connect won't connect to E2000 router

I've had an E2000 router set up and working fine for years. Today I tried to connect to it with Cisco Connect, as I'd like to enable a separate guest network (incidentally, if there's a way to do this through the web management interface, please let me know!). However, the software fails to connect to the router; the progress bar gets to 25% and then eventually times out. I've tried from multiple computers on the network, both wired and wireless, with the same results. Any suggestions? Thanks!
Solved!
Go to Solution.

Hi A_Generic_User. I believe there's no way to configure the Guest network through the web ui. What you can do is try using the software that you can download from their site. Make sure to turn off any firewall on the computer when running the software to avoid conflict. Also, I suggest that you run the downloaded software on a wired PC to avoid wireless interference. Here is the link to the software, http://support.linksys.com/en-us/support/routers/E2000/download . Hope this helps.

Can I install 'Cisco connect' software on more than one PC in the network?

Can I install 'Cisco connect' software on more than one PC in the network? Do multiple installs conflict? Who did try this before?

yes you can
SAP

Windows 8.1 and Cisco Connect Incompatable

I've upgrades a couple of PC's to Windows 8.1. Upon discovering the printer attached to my E4200 v1 by its USB port was not showing after the upgrade, I re-ran Cisco Connect to re-install the printer.
----At this point I'd like to say up front that the E4200 is running the latest firmware, and I am using the latest Cisco Connect available - albeit 2 years old.-----
Cisco Connect gets as far as the USB Printer connect button before displaying an error page telling me "our customer support can help" and giving a link to a support page that doesn't work. Typical Cisco I fear.......
Digging deeper, the Windows Device Manager is showing the system device SXUPTP driver has been blocked from loading, quote:
"The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver. (Code 48)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
Clicking on "Check for solutions" doesn't find one (typical Microsoft), and letting Windows search for a newer driver doesn't find anything either.
Both PC's, a laptop and a desktop, are the behaving the same - so not a PC issue. Both worked with Windows 8.0.
So what's the story Cisco? We need a Connect update, or at least a fixed driver - when will we see this?
Thnx.

Ok - no thanks to Cisco, I seemed to have found an answer. This is unofficial, do at your own risk. Creating a system restore point first would be sensible.
The clue is the Cisco SXUPTP driver is copyright to Silex. The E4200 must have a Silex chip on board to talk to the USB port, and the SXUPTP driver on the PC is what talks to the chip. I visited the Europe Silex site (the US site is harder to get through - it wants you to know which Silex chip you've got as a starting point) at:
http://www.silexeurope.com/en/home/support/productgroups/common-downloads/
I downloaded SX-Virtual Link 3.12.0 dated 29.05.2013 (05/29/2013 in US speak). This downloaded a zip file called s-33a3120a.zip. I unzipped the contents and ran Cosetup.exe to install. After a restart I now have a functioning SXUPTP driver 3.7.1.0. (Forget what the original Cisco one was - 3.5.0.0?)
Ran Cisco Connect again, and all proceeded as normal. Printer re-installed.
The Silex setup program also installs a piece of software called SX Virtual Link, which seems to offer some low level control over the link to the E4200 USB port. I haven't had a play with this.
So why did I have to hack my way through this? Why didn't Cisco post Windows 8 updates BEFORE it was released, let alone 8.1? NOT impressed.

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

Mountain Lion 10.8.4-Cisco Connect-shutdowns kernel panic error-EA6500

I have:
- Mac Mountain Lion OS X 10.8.4
- EA6500 with the latests updates (firmware..) all downloaded from Linksys web
When I install Cisco Connect to setup a USB printer, the software has some kind of conflict with OS X 10.8.4 and the system has unexpected & repentine shutdowns with a restart shutdown panic error report.
If I unistall Cisco Connect the problem doesn´t happen again
After checking all available guides and software, there is no way to solve the issue. I also chat with Linksys support and they have no idea how solve it.
It is for sure a problem of Cisco Connect software compatibility with OS X 10.8.4.
Please, some solution from Linksys or a workaround with Mac terminal commands?
DON´T INSTALL CISCO CONNECT SOFTWARE TILL ISSUE SOLVED!!

Cisco Connect would not work with a router using a Linksys Smart Wifi firmware. Also, VUSB is not going to work with MAC OS 10.8 yet. Hopefully Linksys would release an update that would support MAC 10.8 on VUSB.
Connecting a USB printer through the Cisco VUSB software on a Mac® computer
Connecting a USB printer through the Cisco VUSB software on a Windows-based computer

Cisco Connect Express - Wont Connect

Similar Messages

Maybe you are looking for