Cisco Content Server (Virtualized Application)
Hi.
Can anyone tell me what the hardware requirements are to run a Cisco Content Server virtualised?
Looking at the below link on table 5 I see that is it availiable as a Virtulized Application but lookinh further online I see nothing that gives hardware specifications required.
http://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-content-server/data_sheet_c78-626482.html?cachemode=refresh
Any advice would be great.
Your question would be better placed in the TelePresence section of the forums where these devices are more actively discussed than in the Digital Media section you've posted in.
Given your thread is 11 months old, I'd assume you've found an answer to your problem, but just in case, and for reference for any others that happen to be looking, you can find the specs on what is required on the Cisco docwiki:
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_TelePresence_Content_Server
http://docwiki.cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment
Note: all current versions (up to and including S6.1) do not officailly support running on anything other than Cisco hardware. S6.2 which is due out in the near future is supposed to include support for running on 3rd party hardware, but as it has not been released yet, at the time of this post, this cannot be confirmed.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.
Similar Messages
-
Get files from Content server to Application server
I want to Get few files from Content server to Application server, I have the required Archive ID. It is a HTTP Content server type. Can you please suggest the suitable method for this.
Thanks
Purna> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh -
Check-out originals from Content Server to File server?
Hello Experts,
We have urgent requirement to check-out huge number of originals from the Content server and send to an application server (ftp server).
The input data that we can use to fetch the originals are PHOIO nunber or LOIO or Original File name.
I tested below function module but they does not seem to meet our requirements.
BAPI_DOCUMENT_CHECKOUTVIEW2 - Originals are checked-out to C:\Temp\
CV120_KPRO_CHECKOUT_TO_SERVER
CV120_KPRO_CHECKOUT_TO_TABLE
SDOK_PHIO_LOAD_CONTENT - here the content is written to table in binary mode.
CV120_DOC_GET_FILE
Also i tested program - DMS_KPRO_READ. In this case, manual action is required to select the path in front end where the originals needs to be checked-out.
Please help if you have suitable solutions.
Thanks!
sandeepHello Sandeep,
You can use "DMS_KPRO_READ" report to achive your purpose. In this report you will get PHIO ID & LOIO ID. with these ID's you will get originals path to download the files uploaded on content server to application server or FTP server.
Use F_BROWSE function to select all files in foreground/background to downlaod it on desktop. I have implement in my project & it is working fine till date.
Thanks
Pravin -
Issue with CIS jar version - cis-application-8.0.0.jar on content server
We are having a problem adding this jar to our custom component. We are using this APIs to check-in some programatically.
Following is the error when we try to deploy our component with this jar
===============================================================
IdcAdmin: Content Server idc status: Stopped successfully
Starting the Content Server idc... The server terminated unexpectedly.
02.28 11:36:35.834 main NativeOsUtils version mismatch. The native code version is "7.1.0.2" and the Java version is "7.0.6.0".
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00002ac72c918500, pid=26841, tid=47034930753168
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [libjvm.so+0x3a8500]
========================================================
The content server version is 10.1.3.3.
And the jar version is cis-application-8.0.0.jar. We are able to use the same jar standalone. What could be the problem? Should we need to upgrade to a diffrent jdk version? I am worried that might cause more problems.
Regards,
PratapThanks for your inputs.
So far I have been looking at only CHECKIN_NEW_FORM and CHECKIN_SEL_FORM services for creating and updating content. items These services require files to be attached. I checked the definitive guide and found that there are 2 other similar services,CHECKIN_NEW and CHECKIN_SEL, that don't need the file to be attached. Instead we can specify the file path of the primary file. Since the xml content file to be checked is in th content server itlsef, these services can be used in my case. Moreover since my content checkin logic is in the context of a service, my code become more simpler.
I began working on it and am calling executeServiceSimple("CHECKIN_NEW") or executeServiceSimple("CHECKIN_SEL") based on whether the content to be checked in is new or to be updated. I am setting all the metadata values of the content file in the m_binder local data of the service object.
I thought this should work cleanly but I am getting the below error
============================================
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.data.DataException: !csCheckinFileKeyNotSpecified,primaryFile
at intradoc.server.DocServiceHandler.addFile(DocServiceHandler.java:3251)
at intradoc.server.DocServiceHandler.addFiles(DocServiceHandler.java:410)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sitestudio.SSClassHelper.invokeRaw(Unknown Source)
======================================================
I printed out all the local data in the m_binder object. The primaryFile value is pointing to the right file path. The file is also been created in the correct location.
The dID, dDocName, dOriginalFile, dRevLabel values are all set properly. But still I am getting this error. I am not able to figure out the cause of this. Please help. Is this approach incorrect?
-Pratap -
Upload / Download document to KM Content Server from WebDynpro Application
I have a requirement where I need to upload / download document into / from KM Content Server from my WebDynpro Application.
Is it technically possible and if Yes, can I get any Sample code for this.Hi Tahzeeb,
first of all i would point you to the JavaDocs for KMC API.
https://media.sdn.sap.com/javadocs/NW04/SPS15/km/index.html
And here is a small example of reading and storing KM resources.
For reading:
* Returns a resource as an InputStream from the KM repository
* at the given path. The IUser is needed for authorization.
* @param user IUser for checking authorisation.
* @param resPath Path to the KM resource.
* @return Requested resource as a stream.
private InputStream getKmResource(final IUser user, final String resPath)
throws ResourceAccessException {
try {
final IResourceFactory factory = ResourceFactory.getInstance();
final RID rid = RID.getRID(resPath);
final IResource kmResource =
factory.getResource(
rid,
new ResourceContext(getDeprecatedIUser(user)));
if (kmResource == null) {
throw new ResourceNotFoundException(
"KM resource not found: " + resPath,
resPath);
return kmResource.getContent().getInputStream();
catch (WcmException e) {
throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
And for writing:
* Stores a resource in the KM repository at the given path with the given name and mimetype.
* Content is taken from the given inputstream.
* @param user IUser for checking authorisation.
* @param resName Name of the resource
* @param resPath Path to the resource
* @param mimeType MimeType of the resource
* @param inputStream Resource content
* @throws ResourceAccessException
private void putKmResource(
final IUser user,
final String resName,
final String resPath,
final String mimeType,
final InputStream inputStream)
throws ResourceAccessException {
try {
final ResourceContext rContext = new ResourceContext(getDeprecatedIUser(user));
final RID rid = RID.getRID(resPath);
final ICollection kmCollection =
(ICollection) ResourceFactory.getInstance().getResource(rid, rContext);
if (kmCollection == null) {
throw new ResourceNotFoundException(
"KM resource not found: " + resPath,
resPath);
else {
IContent kmContent = new Content(inputStream, mimeType, -1);
IResource kmResource = kmCollection.createResource(resName, null, kmContent);
catch (ResourceException e) {
throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
finally {
try {
inputStream.close();
catch (IOException e1) {
throw new ResourceAccessException("Error closing InputStream when accessing " + resPath, e1, resPath);
Hope that helps for a start.
Best regards,
ok -
Content Server on Virtual Machine with VPN
Hello everybody.
I want to create a test-environment with a Content Server. Regarding to the needed Operating System I decided to use VMware Workstation to virtualize the OS and the Content Server.
Host-OS: Windows XP Professional
Host-IP: 192.17.1.151, Port 1090, not used
Guest: Windows 2000 Server
Guest-IP: 192.168.159.128, Port 1090
Goal: The goal is to log in into the company-network, and connect to the local, virtual Content Server from the central SAP-System.
Network:
With VMware it is possible to use different types of network connections. I decided for NAT. With this it is used to share to host´s IP-Adress.
Furthermore it is possible to create a Port Forwarding so that requests defined ports of the Host are forwarded to the guest/VM. For this I created the following port forwarding in VMware:
1090 = 192.168.159.128:1090
Tests:
Now, I tried if it is possible to reach the port.
1. Command on VM: telnet 192.168.159.128 1090 => Port available
2. Command on Host: telnet 192.168.159.128 1090 => Port not available (That´s okay)
3. Command on Hostt: telnet 192.17.1.151 1090 => Port available
Result:
When I am using CSADMIN to connect to IP 192.17.1.151 port 1090 there is the following error message: "Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED"
Test 2:
I created port forwardings for the following ports: 80, 8000, 8080, 1095, 3200, 3300. Still the same error message.
Test 3:
I tried to use the Content Server directly in the Network without VPN. The Content Server works correctly, but this is not an alternative to the VPN-Connection.
Question:
From VMware-Side everything looks okay. I already discussed this with different specialist from a VMware Forum. But now I need to know, why it is not possible to connect to the Conntent Server. Port is available but it is not possible to connect to the Content Server. Have I forgotten something?Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Usually this error shows up when you icm paremeters have not been set, check that icm/server_port_0 is set with value PROT=HTTP,PORT=80
Read,
http://help.sap.com/saphelp_nw04/helpdata/EN/56/2e453cabf4ef6fe10000000a114084/content.htm
Regards
Juan -
Content Server & cFolder Integration via Different Application
Hello,
We have cFolder 3.1 and content server. cFolder and Content Server is integrated. User can add file via cFolder & this file will be visible in cFolder.
But Customer has a different requirement.
They want to upload files to content Server Directly(ie not thru cFolders) using a web dynpro application, after uploading, a Document Link needs to be created in cFolder linking to Content Server. (Please note that this has to be document link and not a Bookmark/Hyper Link ). So that customier will still be able to use his API for reading the file content.
Can you plrease suggest the way forward?
Regards
GeogyHi Geogy,
I think you can try the following way for this:
You need to be able to call the API CFX_API_DOC_CREATE, while uploading the document in the webdynpro application. While creating the document, you can provide the URl instead of original file path and save it.
thanks,
rajesh. -
Demo License key issue in Cisco Content Secuirty managment Virtual appliance
Hi,
I have installed a Cisco content security management appliance for customer evaluation. I have downloaded 45 day demo license key but unable to update the license key neither in GUI nor in CLI. I have referred installation guide and user guide but did not helped at all.
Snapshot from GUIWould suggest to re-copy and paste the XML license - as most likely you have extra white space that is causing the malform when pasting/loading. If using Windows, try avoid using wordpad --- and use Notepad++ or similar.
http://www.cisco.com/c/en/us/support/docs/security/email-security-virtual-appliance/118301-technote-esa-00.html
-Robert -
Utilizing Cisco WAAS (Wide area application server) to optimize CAD traffic
Hi all,
Has anyone used Cisco WAAS (Wide Area Application Server) to optimize CAD traffic for agents sitting at remote site ? if so, does the remote agent really notice any improvement login to CAD or while working in CAD ?
Thanks in advance for any inputs / suggestions !!!
D.Hi,
The push-down, the WAAS will push down the signed SMB traffic to Generic AO.
Be aware that if you turn on SMB signing the optimzations performed will only be TFO/DRE/LZ. The signed SMB/SMBv2traffic is optimized, not accelerated with SMB AO like unsigned SMB/SMBv2 traffic.
We know this is confusing, whence: CSCub42695.
I hope answers at least some of your questions.
Regards,
Abhishek -
How to send the file contents in the application server to ftp server
Hi,
how to send the file contents in the application server to ftp server.
regards,
sreeTest SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'userid'
PASSWORD = MC_PASSWORD
HOST = 'servername'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.
Execute external commands (FTP Scripts)
The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
DATA: ld_comline
LIKE sxpgcolist-name,
ld_param LIKE sxpgcolist-parameters,
ld_status LIKE extcmdexex-status,
ld_output LIKE btcxpm OCCURS 0 WITH HEADER LINE,
ld_subrc LIKE sy-subrc.
REFRESH ld_output.
MOVE 'FTP_DATA_IN' to ld_comline. "Maintained using trans SM69
Execute external command, contained in 'ld_comline'
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = ld_comline
additional_parameters = ld_param "Params passed to script
operatingsystem
= 'UNIX'
IMPORTING
status = ld_status
TABLES
exec_protocol = ld_output
EXCEPTIONS
no_permission
= 1
command_not_found
= 2
parameters_too_long
= 3
security_risk
= 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry
= 13
jobcount_generation_error
= 14
OTHERS
= 15.
IF sy-subrc NE 0.
ENDIF. -
SAP Content Server can be installed and supported on a Virtual Machine
Hi,
I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
Are there any sap notes to support this.
Regards,
RajivSAP support VMWARE
MAXDB support VMWARE.
you are free to go.
I would ask this question in the SAP on VMWARE group at Virtualization on Windows
close message here when you created the message in the proper forum. -
Cisco TelePresence Content Server not transcoding
Recently I discovered that the transcoding engine is not responding in my Cisco TelePresence Content Server. I have tried to restart the windows service and the whole machine with no luck. It will record but not create any outputs that are viewable. I do not have maintenance on this so I decided to post here to get some help.
They all appear to be online.
-
Cisco TelePresence Content Server's server mode is stuck in "Configuration reload, Offline"
My Cisco TelePresence Content Server's server mode is stuck in "Configuration reload, Offline"
I can't dial in or dial out.
I tried to restart Content Service
And I tried to reload the server but I cannot resolve this problem.
Are there people having a idea to resolve it?
Thank you.Hi,
You can check the content engine logs in E:/Logs to find what exact error you are seeing there. If it is indeed complaining about the checksum verification failing, you need to contact Cisco support to get it. You need to provide the serial number and the LAN 1 mac address in the support ticket.
You can verify the Windows registries to check if it contains the checksum or not. The location of the registry is: HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > TANDBERG > TCS.
Regards,
-Deepti -
Content Server 4 - User Guide or Applications Manuals
Hi there,
I'm trying to get a user guide or full manual of Content Server 4, anyone has a link to download PDF or some kind of literature??
Thanks
GonzaloHi there,
I'm trying to get a user guide or full manual of Content Server 4, anyone has a link to download PDF or some kind of literature??
Thanks
Gonzalo -
Oracle Content Server Security with Web Center Suite
Hi all
I've configured Oracle Content Server (UCM) to integrate with WebCenter Spaces (WCS). The document service works on a user's personal page but fails on group spaces and when I troll the logs I find the following error:
<WCS-07006> <run-time error obtaining content repository oracle.webcenter.doclib.internal.view.DoclibJCRException: repository error
Caused By: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000401
Caused By: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
I am using a socket connection, not web or SSL.
UCM is on an external server and not on the same machine as WCS.
UCM is 11g and WCS 11g patchset 2. Yes I know UCM 11g is not "officially" supported to integrate with WCS until patchset 3, but others have gotten it to work, so I'd like to do the same.
On UCM machine OHS (from web tier utilities) is installed and comfigured.
httpd.conf edited as per requirement.
config.cfg and intradoc.cfg edited as per requirement.
Admin user on UCM has admin and sysmanager rights.
I think this may be because the UCM uses the internal default LDAP first (i.e. it is first on the list of providers) because it does not have an admin user in the external LDAP. So even though in the service connection I specify the UCM admin i think it must also be able to find this user in the external LDAP on the WCS side.
I am currently having trouble figuring out how to give an external LDAP user the same permissions on UCM as that which the default internal LDAP admin user has, so that I can use that external LDAP user in the services connection setup instead.
With WCS under the Fusionware EM is simply added an external LDAP user to the domain for the webcenter section, but for UCM I'm not sure where the appropriate place is to add such a user.
I am also not 100% sure if this is actually the issue.
Any advice will be greatly appreciated!
Thanks!
If it helps:
run-time error obtaining content repository[[
oracle.webcenter.doclib.internal.view.DoclibJCRException: Repository error
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:106)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:288)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:177)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.jcr.ItemNotFoundException: Unable to get folder info for dCollectionID = 288463355527000403
at oracle.jcr.impl.ExceptionFactory.itemNotFound(ExceptionFactory.java:587)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:433)
at oracle.jcr.impl.TransientLayer.getResourceByUUID(TransientLayer.java:323)
at oracle.jcr.impl.OracleSessionImpl.getNodeByUUID(OracleSessionImpl.java:279)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getNode(JCRRepositoryLogic.java:178)
at oracle.webcenter.doclib.internal.view.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:849)
... 90 more
Caused by: oracle.stellent.ridc.protocol.ServiceException: Unable to display virtual folder information. Cannot read folder.
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:116)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:92)
at oracle.stellent.jcr.IdcPersistenceManager.getResourceByUUID(IdcPersistenceManager.java:421)
... 94 moreHi, Thanks for response.
1. I have created default webcenter project application.
2. Created content repository connection using File System..
3. Created new page using default Template.
4. Drag drop Document List Viewer TaskFlow and setup the content server connection.
5. After running the application , i can see list of documents link in page..
6. But When I click on any link ..browser automaically close..
7.On server console I am getting above mentioned error..
I am using jdev 11.1.1.5 and running on internal weblogic server...
Thanks
Naresh
Maybe you are looking for
-
HTML style not visible in Peoplesoft But able to view in Preview RTF templa
Hi Team, Anyone help me urgent. I am not able to view the HTML style in HyperLink in Peoplesoft Online. But i am able to view in Preview tab. I am wondering. i.e. My data's are able to view in online but tables that border are not visible. But it wor
-
HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.
After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.
-
Invalid login credentials when install oracle xe
Hi friends, I installed oracle xe version 10.2.0.1.0 correctly, but when i tried to login to adminstration via http://localhost:8080/apex with sys or system and the password (which i have given during the /etc/init.d/oracle-xe configure) It says inva
-
hi, i am in need of document explaining Hap_Document BSP Page Reg, Hariharan
-
How can I reactivate my Photoshop CS ver 8
The help at adobe seems to have no way to contact a live person.