Cisco Could not process the RSN and WARP IE's. station not using RSN

I keep getting this over and over in my syslog. I haven't been able to find anyhting out about it.
Could not process the RSN and WARP IE's. station not using RSN

Sounds like the infrastructure is configured for WPA1 and the client for WPA2.

Similar Messages

When I was updating I Phone version 4 from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

HT1351 I am trying to sync my ipod and it is not showing the options and wont sync. it does not even register that it is connected. Any suggestions?

I am having trouble getting my ipod to register that it's connected so that I can sync it. Any suggestions?

Start by working through each of the suggestions in this Apple support document.
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HT1338 I forgot my administrative password and login. I do not have the CD and every time i try to use single user mode it does not work either. Is their anything i can do to reset this? I don't care about losing the information.

Please help me ive been trying to do this all day by googling it and using apple. HELP PLEASE

Hello, is it an admin Login, or possibly a Firmware Protection Password???
Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Windows setup could not process the Catalog setting

Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
Regards

Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

I had this problem and also was unable to directly access the App store and could not get iMessage to work. I disabled the firewall protection on my third party virus protection software, rebooted and was good to go. iMessage also works and I can directly access the App store, rather than enter via iTunes.

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium

I want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

i want to update my credit card info. I have moved to a new country and can not process the payment. PLEASE HELP

The same Adobe ID can not be used to make payment if you have changed country. To get complete resolution, please contact Adobe support Contact Customer Care.
Regards
Rajshree

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

If the computer iTunes is signed into the same account then contact iTunes:
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

Cisco Could not process the RSN and WARP IE's. station not using RSN

Similar Messages

Maybe you are looking for