Cisco Cube outgoing calls only display the sip-ua number

Hi all,
just configure a cisco cube. Incoming and outgoing calls working fine till now.
Just facing an issue by outgoing calls. Any call will display the sip-ua registered number.
Is there any possibility to send the invite with the calling extension number to the provider ?
Trace:
Sent:
INVITE sip:XXXXXX0705430@REGISTRAR:5060 SIP/2.0
Via: SIP/2.0/UDP IPADR:5060;branch=z9hG4bK1A26DC42
From: <sip:XXXXX8650@REGISTRAR>;tag=610A3424-23E3
To: <sip:XXXXXX0705430@REGISTRAR>
Date: Tue, 01 Apr 2014 13:06:20 GMT
Call-ID: 407F52E0-B8D511E3-AFC2A60F-9EF8485@IPADR
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1082006160-3100971491-2948376079-0166691973
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M4
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Timestamp: 1396357580
Contact: <sip:XXXX8650@IPADR:5060>
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest
username="XXXXX656",realm="sipserver",uri="sip:CALLED NUMBER@REGISTRAR:5060",response="76585ce198a4e979b49506b0ea6c515e",nonce="533abaa600015524028af19f6845968088c38fe616a3cdba",algorithm=md5
This number will the called party see on the phone screen ->
Max-Forwards: 69
P-Preferred-Identity: "Test NextiraO" <sip:XXXXX8650@IPADR>
Session-Expires: 1800;refresher=uac
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 253
Any hint?!
Thanks
Stefan

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12160936/cisco-cube-outgoing-calls-only-display-sip-ua-number

Similar Messages

I have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id

i have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id, can help me?

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

Function in select statement need to be called only for the last record.

Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
resuts:_
State Local Details
AP APlocal details1
UP UPLocal details1
MP MPLocal details1
i) The above query returns 100 records
ii) fun_state_loc_other_details is also getting called 100 times. But I want this function to be called only for the last record that is 100th record.
is there any way to do that?

Thanks amatu.
One more small query. Can I do it on condition based.
Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
Like if one state it need to be called once.
AP -- 50 records
UP - 20 records
MP -- 10 records.
fyi: this record no. varies
I want the function to be called for AP once, UP once, MP once.

My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

Hi sayla,
When you reloaded your software did you do a clean reload (deleting all data)? http://bbry.lv/bpv7DT
If so, you might try doing a resettofactory using the following instructions. http://bit.ly/fMW9I4 This will reset to factory default.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

Pages will only display the first page of text.

Pages will only display the first page of text. New pages are created as usual but blank and pages are visible through quick views. Reinstalling does not fix the problem, I don't know if it is an issue with settings. Pages v 4.1 on OS 10.7.4. Running on new macbook with retina.
This is apparently a retina issue. Update hopefully soon

You have not said but it sounds like you are using a Macbook pro with retina display.
Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
Peter

Mail doesn't display full email text, only displays the subject line

Mail doesn't display full email text, only displays the subject line.
My preview shows first three lines of email, but when I chose the email specifically mail doesn't display any lines of text. Been this way for about ten days. Please help. Ben

Awesome. Rebooting the phone worked. I had never turned the phone off before (for the next guy - you hold down the "sleep" button for longer than you'd think and that'll do a full shutdown). thank you for your help.

TS3274 Email display problem: My email only display the list of emails and a preview (first two lines of the body of the mail). If one click on the message it only shows the heading on the right hand side of the screen, but not the content.

My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4061 my iphone will not do anything...i tried to restart and reset......the phone only displays the apple logo.

my iphone 4 will not do anything....i tried restarting and resetting....the phone only displays the apple logo.

Hello there, Faustinamarfo.
The following Knowledge Base article provides some troubleshooting steps for your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My daugther's ipod only displays the apple on the screen and we cant get it to do anything can anyone suggest what to do please?

my daughter's ipod only displays the apple on the screen and we can't get it to do anything. any suggestions ?

tia,
Click on the following link, which is an Apple tutorial which is related to the problem you are having:
http://support.apple.com/kb/TS3281

DoFilter() method is being called only at the second request

Hi,
I have implemented a simple Filter class
Here is the code
public class BasicFilter implements Filter
FilterConfig config;
public void init(FilterConfig config)
System.out.println("Filter Initialised");
this.config = config;
public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain) throws ServletException,
IOException
System.out.println("In The doFilter() method");
ServletContext sc = config.getServletContext();
sc.setAttribute("Hello","Hell");
chain.doFilter(request,response);
public void destroy()
System.out.println("In the destroy method");
and a simple servlet
public class FilteredServlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Filter Demo</TITLE></HEAD>");
out.println("<BODY>");
out.println(getServletContext().getAttribute("Hello"));
out.println("</BODY>");
out.println("</HTML>");
Now when i start the server (Tomcat 4.0) i find that the filter's init() method is being called which is fine. But when i request the servlet (FilteredServlet) the doFilter() method is not called and only when i "refresh" it or call it a second time that the doFilter() method is actually called. What could be the reason for this.
Help will be greatly appreciated.
Thank You,
Phani Kanuri

Hi jleech,
Thanks for the reply. But deleting all the temporary internet files as also the history files does not seem to have an effect. the doFilter is being called only at the second request. or did i miss anything??
Please help. unable to complete the assignment because of this.
Thank You,
Phani Kanuri

Why the test report's failure chain only display the first failure?

Hi All,
why the test report's failure chain only display the first failure step?how to get all the failure steps in the failure chain?
Thanks a lot.
BR
Johnny

Did a quick search and came across the following links
http://zone.ni.com/devzone/cda/tut/p/id/4563
http://zone.ni.com/devzone/cda/epd/p/id/3326
Regards
Ray Farmer

Itunes on my iPhone 5 only displays the artist list with the UP NEXT feature. How can I change the UP NEXT feature on my iPhone 5 to display the next songs that are to be played on my play list?

Itunes on my iPhone 5 only displays the artist list with the UP NEXT feature. How can I change the UP NEXT feature on my iPhone 5 to display the next songs that are to be played on my play list?

Hi Sarah,
It sounds like the songs have either not yet synced over to the iPhone, or something went wrong when attempting to sync to the iPhone. My recommendation is to uncheck the "Sync Music" checkbox.
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following articles:
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Thanks,
Matt M.

Using WEB Output HTML Gallery and uploading using ftp upload the HTML page views correctly but images only display the alt tag?

Using WEB Output HTML Gallery and uploading using ftp upload the HTML page views correctly but images only display the alt tag in the browser window?

After a little investigation, I discovered that PNGs also do not render correctly in IE7 in similar circumstances.
I ended up using Levels in Photoshop to bring the output blacks up to "5", saved the images as PNGs, modified the HTML from .jpg to .png, and that seems to have covered up the problem well enough.
By the way, I did confirm that IE8 beta 2 renders the images correctly.
Brian

Pie Chart Only Displays the Data of the First Row of the Table

Hi Experts,
I have a problem that the pie chart will not change when click on a second row or other rows on the table. It only displays the data of the first row of the table. How can I set up to make it reflect on any rows when I click the table? Please help, and I would very appreciate that.
Thanks,
-Don

Thanks a lot for your response. I have realized that the pie chart behaves that way, so I just use the filter to see the specific data that I want. Also, you can drag the row and drop it right at the first row to see the data in the pie chart.

Cisco Cube outgoing calls only display the sip-ua number

Similar Messages

Maybe you are looking for