Cisco CUE AA Editor

Im new on this, I install the AA Editor 2.3, I hit new, but after that, I can't drag and drop anything.
What is the problem?
thanks.

Hi Rafael,
Sorry to hear this my friend. Can you please try the much newer CUE Editor version 3.1.1
http://www.cisco.com/cgi-bin/tablebuild.pl/cue-311-utilities
Hope this helps!
Rob

Similar Messages

  • CUE Script Editor

    Hi anybody,
    Looks like my cco account cannot even download the CUE Script Editor application from the website. Can anyone provide that and zipped up ?
    Need that desperately for amend some scripting. Many Thanks

    You need to acquire the software through cisco.com for tracking purposes.
    If you don't have access to certain software on your cisco.com account, then try:
    Customer Service: 1-800-553-6387
    1) Old option- 1
    2) Then option-4
    3) Then option- 3
    4) lastly option-6
    Please note that this support is not the regular GCC support. This is
    the customer service for all issues non-techinal or semi-technical in
    nature and they use their own Service requests so do not recommend
    customer to refer TAC Sr's.

  • Cisco WCS Map Editor- Any suggestions???

    Does anyone here on the forum have any suggestions to make the Map Editor function in Cisco's WCS easier to navigate??  I have been trying to set the "light walls" on the floor plan I uploaded and it keeps coming out a mess.  Also, when I am done adding the interior walls how do I stop editor for outlining?
    Any suggestions would be great.  Ready to scream!
    Thank you.
    Rgds,
    Vicky

    I used to double click the mouse when i finish drawing  a wall it seems to work but yea it is quite hard. You should be able to click save button on top of the editor to stop and you can outline. Is that what you want to know?
    cheers

  • CUE Script Editor 3.1 Download

    Hi,
    I am looking for the software, but cannot find it in the normail downloading area. Can someone please put a link here?
    Thanks.

    Hete you go: http://www.cisco.com/cgi-bin/tablebuild.pl/cue-311-utilities
    brandon

  • CUE 231 editor installation issue

    I am installing CUE editor 2.3.1 on a company laptop. When I run the program the window just pops up and goes away.
    Am I missing something like a version of java?

    Yes I do, it installs but doesnt run.
    I see the opening page flash and go away.

  • Cisco Unified CCX Editor service on CCX

    Hi all,
    How to active subj on CCX  7.0(1) ? I couldn't  find how to do it.

    What Aaron means is that it is normal that the CCX Edit service is in a stopped state.
    As far as being unable to save files to the CCX system, I assume you mean you can't access the Script Repository. Are you sure you are logging on successfully? If you log on anonymously, you won't be able to save the file.
    If that isn't the issue, can you check to see if you can save a file to the Script Repository using the CRS Editor on the UCCX system. If you can, then I would ask if you had any network ACLs floating around that may be problematic.
    HTH.
    Regards,
    Bill

  • Debug Error in Cisco Unified CCX Editor

    The error is, "Task:29000012458 AcceptStep: Trigger is not a ContacApplication Trigger".
    My impression, reading the documentation, is that the Accept trigger is ubiquitous in these types of scripts.
    What happens if I get rid of it?

    The Accept step answers the audio call for JTAPI-based contacts. Any step that interacts with a contact (e.g. Accept, Get Call Contact Info, Play Prompt, etc) will fail if you're doing an step-through debug. You will need to load the script, start a reactive debug, and then call the application trigger. This way your audio call is a contact that the Accept script can process.

  • Cisco ISE Anyconnect Profile editor

    I want to wired user's authenticate from ISE device and  to use authentication protocol EAP_FAST. In PC need to install Cisco Anyconnect Profile Editor.
    where and how i get anyconnect profile editor.
    Thanks.

    It's one of the packages listed in the AnyConnect download location.
    Go here and click on Download Software.

  • Convert Cisco WebEx .WRF and .ARF files for Mac OSX to .WMV

    Since the Cisco WebEx Recording Editor doesn't appear to support Mac OSX, is there a way to convert Cisco WebEx recordings, .WRF and .ARF files, to .WMV or .SWF for a Mac OSX users?

    Hi Ben,
    Here is a copy/paste from the Arcsoft site:
    What is a PHB file?
    Question
    What is a PHB file?
    Answer
    PHB files are proprietary album files used by some of our programs, namely PhotoBase. Albums do not store your images. They serve as links to files stored on your computer or removable drive. If you delete the original file, the thumbnail in the album basically becomes a dead link. For example, if you have files on a floppy disk and create an album, you'll always need to have that floppy in the drive whenever you want to view the full images. Likewise, if you have a digital camera that is read as a removable drive, you would need to have it connected if you create the album directly from the camera. The best thing to do is copy all of your images into a folder on your computer, then create the album referencing those files. Albums are useful because they let you preview and organize files on your system in a convenient fashion. It is also from albums that slide shows are made with some of our programs.

  • How to install more CUCCX Editor versions on the same PC?

    Hello,
    is there a workaround to install more CUCCX Editor versions (e.g.: 4.x, 7.x, and 8.x) on the same PC?
    In fact, when a CUCCX Editor is already installed, we have to uninstall it before installing another version.
    TIA and Regards.

    Hi,
    I am hoping that you are trying to install Editor on some client PC, because you can not install Editor on the UCCX box, as you know that by default UCCX install has installed the Editor also.
    Do not manually install the Cisco Unified CCX Editor on a server that is running Cisco Unified CCX. The Cisco Unified CCX Editor application is installed by default when you install Cisco Unified CCX and you will receive an error message if you try to reinstall it.
    Reference:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/installation/guide/uccx70ig.pdf
    Hope it helps.
    Anand
    Please rate the helpful posts!!

  • CUE AUS Language Pack

    Hi all,
    anybody knows if there is the language pack in the suject for CUE 8.6?
    I'm looking for it but no luck.
    Any help is appreciated.
    Thank you in advance.

    Hi Stefano,
    You are most correct my friend. Sadly, there is no Aus. language pack
    Languages Supported
    Cisco Unity Express 8.6 supports 24 different languages for the  telephony user interface and the VoiceView Express user interface.  However, the GUI pages, command-line-interface (CLI) commands, and the  Internet Message Access Protocol (IMAP) interface are only available in  English.
    Multiple languages can be installed on the system at one time. You can  install up to five languages at one time on the NME-Cisco CUE,  ISM-SRE-300-K9, SM-SRE-700-K9, SM-SRE-710-K9, SM-SRE-900-K9, and  SM-SRE-910-K9. You can install up to two languages on the AIM2-Cisco CUE  and ISE-Cisco CUE.
    Cisco Unity Express 8.6 supports the following languages:
    •Arabic
    •Chinese (Hong Kong)—Introduced in Cisco Unity Express Release 8.6.1
    •Chinese (Mandarin)
    •Chinese (Traditional for Taiwan)—Introduced in Cisco Unity Express Release 8.6.1
    •Danish
    •Dutch
    •English (United Kingdom)
    •English (United States)
    •French (Canada)
    •French (Europe)
    •German
    •Hungarian
    •Italian
    •Japanese
    •Korean
    •Norwegian
    •Portuguese (Brazil)
    •Portuguese (Portugal)
    •Russian
    •Spanish (Europe)
    •Spanish (Latin America)
    •Spanish (Mexico)
    •Swedish
    •Turkish
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#wp306873
    Cheers!
    Rob
    "I don't know how, I don't know when
    But you and I will meet again " 
    - Tom Petty

  • CUE script edit problem

    Hi..
    I have cue script editor 6.1. I have written a new script and have uplaoded the script into the CUE but I donot see the Edit otion for the script I have written.
    The below image is the screenshot of the CUE. The Bergentowncentre.aef was created by our vendor, the below one-test.aef is the one I created and as u see I donot have the Edit option there.
    Please suggest.

    You can hire a reputable professional to help you.

  • UCCX 10.5(1) Script Editor Refuses to launch

    Greetings,
    Last week it worked fine, this week when I click the Cisco Unified CCX Editor icon to launch the script editor I get a flash of the splash screen then nothing.  I have uninstalled/reinstalled.  Uninstalled and gone back to delete any directories, cleaned any reference to wfavvid out of the registry and reinstalled.  Reinstalled Java.  All to no avail.  I am trying to figure out if there were any windows up dates that were applied since the last time I had this working.  Something is definitely being unpleasant.
    Windows 7 Professional x64
    2GB RAM
    Thanks!

    Hello Ahochau
    Have a look at the following post as its a possible solution:
    https://supportforums.cisco.com/discussion/12285941/ccx-105-script-editor-not-working-win7-enterrpise-64-bit
    Regards
    Hoai

  • Multiple Schedules and Auto Attendant in UC560

    Dear all,
    I have configured two schedules in UC560 using CCA 3.0.1 (office_hours and break_time).  I have then configured two auto-attendants. AA1 is used for office_hours and AA2 for break_time.  AA1 is working fine.  However, when it is break time, AA2 is not being used, instead the menu for closed hours in AA1 is used.  If I swap office_hours and break_time as AA2 and AA1, then break_time is ok while office_hours settings do not work.
    Internally, I can dial both AA extension numbers and get the correct prompt.  The problem is when an external call comes in.
    Any ideas what I may be doing wrong?

    Hi Tiziana,
    Sorry, I should have been more specific. What you have there is the built in script editor express. You can download the standalone CUE script editor here:
    http://www.cisco.com/cisco/software/release.html?mdfid=282825559&softwareid=282774364&release=7.0.6&relind=AVAILABLE&rellifecycle=&reltype=latest
    Edit to add: I think there are also some sample scripts that may help you out there as well. Here is also the Unity Express Script Editor guide.
    Best,
    David

  • How to save current date into a veriable

    I am using Cisco Unity Express Editor 3.2.1
    I want get the current date, today, from the ssytem and then save into a "date" veriable.
    How can I do that?

    options (skip=2)
    load data
    badfile 'C:\CAP_SPS\Batchscripts\psafixbad.txt'
    discardfile 'C:\CAP_SPS\Batchscripts\psafixdiscard.txt'
    append
    into table sps_psafix
    when record_layer='Project'
    fields terminated by ','
    trailing nullcols
    record_layer position(1),
    file_name,
    attr1,
    attr2 filler,
    attr3 filler,
    attr4 filler,
    attr5 filler,
    attr6 filler,
    attr7 filler,
    attr8 filler,
    read_flag constant '0',
    date_column_name SYSDATE
    )SY.

Maybe you are looking for

  • Binding UI element in a table

    Hi I have a table UI based on a context mapped to Adaptive RFC Model. I would like to add another column with buttons and to be able to manipulate their 'enable' property based on values in the table. I created new context node with attribute value o

  • Error in AET in SAP CRM 7.0 EHP1

    Hi All , I have created new table using AET in SAP CRM ehp1 and it  has created new z-component and z-table succusfully. When I opened the component and view and i noticed it has been created two context nodes. One is Parent and another is z-context

  • Help: question on send XML file from java client to java server

    Hi, I am now to Java, and now I am going to set up a simple network in the lab. I have created a random array of data and transferred to XML file on my client. Now, I would like to send it to the server. I am wondering how I can put the XML file into

  • TOC, streaming video and screen size

    Hello,  A recent project is shaping up to be a video based course.  The purpose of the project is to introduce and explain a sales software package. Before I start to work I need to ensure Captivate 7 can cover three basic requirements; 1. The end us

  • DBMS_XSLPROCESSOR and xsl:import

    Hi all! I'm using Oracle 9.2 and DBMS_XSLPROCESSOR to transform my XML to HTML. I build XML using DBMS_XMLDOM methods, build stylesheet using dbms_xslprocessor.newstylesheet, then try to transform it using DBMS_XSLPROCESSOR.processXSL. It work fine.