Cisco CUPS High Availability Issue
Hello,
Any one please could help with the below error i'm facing on CUPS 8.5.2
It's always in Initialization mode
And notification tells nothing
All,
Being stuck in the "initializing" state typically has to do with name resolution of the other server (especially in different subnets). I haven't narrowed down the EXACT requirements, but I believe it to be one of the following is required:
1) @domain.com
2) @SIPProxydomain.com
Where domain is the domain configured on the underlying linux system and can be found via the command "show network eth0 detailed". SIPProxy domain is the instant message domain that all the users have. This can be found under System -> Cluster topology -> Settings. While you are in this menu and your CUPS nodes are in different subnets please ensure the routing mechanism is changed to "router to router" and restart the XCP Router.
You can verify the 2 lines above can be resolved from the CUPS node CLI by the command: "utils network host "
Regards,
Jason
Similar Messages
-
Backup DB's on High Availability issue
I have an issue with backing up the DB's from cluster server that have 2 nodes on him.
I have a Cluster server with High Availability (for Active/Active cluster) and I trying to take a full backup from him but it says that :
The selected backup type is not supported on a "Always on secondary replica"...
And sending me to Microsoft webpage :
http://go.microsoft.com/fwlink/?LinkId=208213
Active Secondary's: Backup on Secondary Replicas.
All I want to do is to backup the primary node with Full Backup type on nightly basis and shrink the log file . (without un-synchronizing every day)
Thank youUse copy_only for full backup on secondary.
Backup Types Supported on Secondary Replicas
BACKUP DATABASE supports only copy-only full backups of databases, files, or filegroups when
it is executed on secondary replicas. Note that copy-only backups do not impact the log chain or clear the differential bitmap.
Differential backups are not supported on secondary replicas.
BACKUP LOG supports only regular log backups (the COPY_ONLY option is not supported for log
backups on secondary replicas).
A consistent log chain is ensured across log backups taken on any of the replicas (primary or secondary), irrespective of their
availability mode (synchronous-commit or asynchronous-commit).
To back up a secondary database, a secondary replica must be able to communicate with the primary replica and must be SYNCHRONIZED or SYNCHRONIZING.
https://msdn.microsoft.com/en-us/library/hh245119.aspx -
Cisco Unified Presence 8.5 High Availability problem
As we have two Cisco presence version 8.5 node as subcluster and configure as High Availability in a Subcluster . Once i click enable HA on the
presence server . its give the below messages as meniton
Primary server :
node state : Running in backup mode
node reason : peer down during initialization
Seconary server :
node state : unknown
node reason : High Availability not enabled.
Even All the service are up and running.
So please advice hightly appreciate for you response.Hi,
Are both the CUP servers in different subnets/networks? If yes, then there is a setting under cluster topology page that has to be modified. It must be in Settings under cluster topology page. The default parameter will be 'MDNS'. This has to be changed to 'Router to Router' if the servers are in different subnets.
-Sankar
Sent from Cisco Technical Support iPad App -
File Adapter vs BPEL interaction issue on high availability environment
Hi all,
i would really appreciate your help on a matter i'm facing about a composite (SCA) deployed on a clustered environment configured for high availability. To help you better understand the issue i briefly describe what my composite does. Composite's instances are started by means of an Inbound File Adapter which periodically polls a directory in order to check if any file with a well defined naming convention is available. The adapter is not meant to read the file content but only its properties. Furthermore, the adapter automatically makes a backup copy of the file and doesn't delete the file. Properties read by the adapter are provided to a BPEL process which obtains them using the various "jca.file.xyz" properties (configurable in any BPEL receive activity) and stores them in some of its process variables. How the BPEL process uses these properties is irrilevant to the issue i'd like to pose to your attention.
The just described interaction between the File Adapter and the BPEL process has always worked in other non-HA environments. The problem i'm facing is that this interaction stops to work when i deploy the composite in a clustered environment configured for high availability: the File Adapter succeeds to read the file but no BPEL process instance gets started and the composite instance gets stuck (that is, it keeps always running until you don't manually abort it!).
Interesting to say, if I put a Mediator between the File Adapter and the BPEL, the Mediator instance gets started, that is the file's properties read by the adapter are passed to the mediator, but then the composite gets stuck again 'cos even the mediator doesn't seem to be able to initiate the BPEL process instance.
I think the problem lies in the way i configured either the SOA infrastructure for HA or the File Adapter or BPEL process in my composite. To configure the adapter, i followed the instructions given here:
http://docs.oracle.com/cd/E14571_01/integration.1111/e10231/adptr_file.htm#BABCBIAH
but maybe i missed something. Instead, i didn't find anything about BPEL configuration for HA with SOA Suite 11g (all the material i found refers to SOA Suite 10g).
I've also read in some posts that for using the db as a coordinator between the file adapters deployed on the different nodes of the cluster, the db must be a RAC! Is that true or is possible to use even another type of oracle db?
Please, let me know if someone of you has already encountered (and solved :)) a problem like this!
Thanks in advance,
Bye!Hi,
thanks for your prompt reply. Anyway, i had already read through out that documentation and tried all settings suggested in it without any luck! I'm thinking the problem could be related to the Oracle DB used in the clustered environment, which is not RAC while all documentation i read about high availability configuration always refers to a RAC db. Anyone knows if a RAC Oracle DB is strictly needed for file adapter configuration in HA cluster?
Thanks, bye!
Fabio -
Cisco WLC in High Availability over WAN
Hi my name is Ivan i have a trouble perhaps could you help me...
I have two cisco wlc 5508. I wan to install them in two differents site. One WLC in the site A and the another WLC in the site B.
Site B is the WAN of the site A. The site A is the headquarter.
But i need to configure them in High Availability. For example if the Cisco WLC in site A goes down, the ap's have to registered in the WLC of the site B.
Then the traffic LWAPP have to pass over the WAN between site A to site B.
I have to configure two cisco wlc in HA over a WAN . Please could help me to do this?. Is ok configure the roamming L3 intercontroller?
Thanks for your answers
Regards
Ivan,
AP'S - WLC - SITE A ----WAN-----WLC - SITE B - AP'S
WLC SITE A DOWN = AP'S SITE A REGISTERED IN WLC SITE BHi Surendra thanks for yoru answer.
Surendra, if the ap in the site B (in the WAN) goes down then the traffic lwapp have to pass over the wan,
what will should i do to ensure access point can register on to the cisco wlc in the WAN, moreover to configure the mobility groups in both wireless lan controllers?
or i only have to configure in the wlc the mobility groups? Could you explain me what things have i to do to ensure this
SITE A - (ACCESS POINT M) - LWAPP -----PASS OVER WAN---- SITE B - CISCO WLC - (ACCESS POINT M)
STATUS: REGISTERED IN SITE B
Thanks for your answer
IVAN
Regards -
– Enable high availability and redundancy for Cisco WAAS
How this is available
– Enable high availability and redundancy for Cisco WAAS appliances in data centers.
Thank you.Hi,
You can serially cluster two WAE devices with the Cisco WAE Inline Network Adapter installed to provide higher availability in the data center if a device fails. If the current optimizing device fails, the inline group shuts down, or the device becomes the overloaded, the second WAE device in the cluster provides the optimization services. Deploying WAE devices in a serial inline cluster for scaling or load balancing is not supported.
More deatils here: Clustering Inline WAEs
Hope this helps.
Regards.
PS: Please mark this as Answered, if this answers your question. -
Cisco ISE in High Availability mode
Hello
Need some help, I have hardware cisco ISE 3315, want to go for high availability now, my question is that;
1. Is Cisco ISE available on Hyper V ?
2. Is it possible to configure 1 hardware , and other virtual (VMware / HyperV {If available}) in high availability mode ?
Thank you very much.While ISE may run in Hyper-V, it will definitely not be supported so I recommend staying away from doing that. The only supported virtual environment is VMware. If you only have Hyper-V then you will have to get another appliance. Do keep in mind that the 3315s are EOL/EOS. The replacement models for those are the 3415.
As it was already stated above Charles and Karsten, you can mix virtual and physical appliances. So if you do en up going with a supported virtual solution make sure that the resources for the ISE nodes are dedicated/reserved and that thin provisioning is also NOT supported.
Hope this helps!
Thank you for rating helpful posts! -
Outlook Anywhere, high availability cas issue.
We are beginning a deployment of a 3 node exchange 2013 dag/cas group and have hit a snag with outlook anywhere.
the configuration:
SIDHEX01A - DAG member and CAS
SIDHEX02A - DAG member and CAS
SIDHEX03A - DAG member and CAS
We have one live database running on SIDHEX02A with passive copies on 1 and 3. We have 5 live users functioning as a test group.
DNS: we have internal DNS set to resolve mail.domain.net as all three servers. We have public DNS set to resolve mail.domain.net to an external ip on our firewall. From there we forward ports 25, 80, and 443 to server SIDHEX02A.
All 3 servers have Certs for mail.domain.net applied to iis and smtp.
We have set the external ( and internal names) of all the exchange services to mail.domain.net including owa, ecp, outlook anywhere, oab, activesync, and ews.
Our next step plan was to replace the direct port forward with a load balancer completing the high availability cas, when we hig hthe following snag:
The DAG works prefectly.
OWA, activesync, ecp, oab, ews all function fine.incomming and outgoing mail works perfectly. we simulate cas load balancing by changing the port forwarding to direct to a different cas server.
We are however experiencing some weird behavior with outlook anywhere.
We have a large number of users that work completely off-prem and will be using outlook with out ever connecting to the internal network at all. When we try to configue outlook to connect to the CAS we are trying to use the following:
server: mail.domain.net
exchange proxy: mail.domain.net
This doesn't work, the outlook client never finds the server.
testexchange reports that it is unable to ping the proxy server (it is pingable) after corectly checking certs and doing all the other communications.
Attempting to ping RPC proxy mail.domain.net.
RPC Proxy can't be pinged.
Additional Details
A Web exception occurred because an HTTP 404 - NotFound response was received from Unknown.
Headers received:
request-id: e9462008-75e2-4990-9d0f-a6c5514f5bce
X-CasErrorCode: EndpointNotFound
Persistent-Auth: true
X-FEServer: SIDHEX02A
Content-Length: 0
Cache-Control: private
Date: Mon, 30 Dec 2013 02:46:34 GMT
Server: Microsoft-IIS/8.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 21308 ms.
Now if we tell the outlook client to use SIDHEX02A as the server name outlook will resolve the mailbox and everything apears great, except for two issues.
With a load balancer implimented we wouldnt know what the target server name was.
Secondly, we see some sort of link in outlook to the internal server name. On a cas failover outlook functions perfectly until it is closed and reopens with around a 60 second "trying to connect" before finally resolving the mailbox. This apears to
be permanent, if we start an outlook profile on sidhex03a for example, it will have 60 sec delays on 01 or 02, but never 03. Its as if the client is looking for its "home server" before considering alternitives.
Its posible that the load balancer would resolve some of this and we are happy to do that, we have also looked at ARR since this blog post seems to imply its required.
http://blogs.technet.com/b/exchange/archive/2013/07/19/reverse-proxy-for-exchange-server-2013-using-iis-arr-part-1.aspx but we dont want to add complexity over a problem until we understand why its needed.
Also of note: we dont have a cert for autodiscover.domain.net, nor is it publicly resolvable.
we dont have any 2010 servers, this is a clean 2013 envroment.
Thank you for taking the time to review this issue, I will provide any follow up info I can.Hi,
Firstly, I’d like to explain, the host name autodiscover.domain.com should be in the certificate to ensure Autodiscover service can work externally.
And I’d like to confirm if the test users are used internally and how about directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Additionally, according to your description, you forward ports 25, 80, and 443 to server SIDHEX02A.
Then to understand more about the issue, I’d like to confirm if you set all SMTP,HTTP and HTTPS requests forward to the server SIDHEX02A and how to achieve that. Maybe this is the key point of the issue.
Thanks,
Angela Shi
TechNet Community Support -
High Availability Installation issue (ASCS instance did not stop)?
Hi,
We are facing an issues in High availability system installation. (ERP ECC6.0 EHP5) We have completed Node A installation.
We are installing based on Virtual IP.
Node A Installation:
Steps 1: ASCS instance
Step 2 : DB Instance
Step 3: Enqueue replciation Server istance
Step 4: Central instance
I have complete these steps successfully. But We have started Node B installation. We have faced error in Node B. Error is on ASCS instance.
Error Details: "SID/ASCS00(partially) did not stop. " In ASCS instance 5th phase, we are getting this error.
Due to this error, We are not able to continue the process.
Could you please help to solve this.
Thanks!!!Hi Sir/Madam
I have one to install SAP cluster with two node with window server 2003 x64 R2, SQL server 2005.
below it is my step.
1. assume my window cluster and sql server are working fine.
2. I have start install ASCS on virtual disk from node 1.
3. i have install First MSCS on virtual from node 1.
4. I have install Database instance on virtual disk from node 1.
5. I have install Second MSCS on virtual from node2.
6 I have install ERS on physic disk on node 1.
7. i have instgall ERS on physic disk on node2.
8 i have install CI on physic disk on node 1
9 i have install DI on physic disk on node 2.
this is procedure that my consultant have set up on my real sap system . but when I try to install on lab . i got error when i finish on step 5 above .
could you please tell me the above step is correct or not ?
thanks . -
Cisco Prime Infrastructure 2.1 High availability Question
Hello All,
I am configuring high availability for two prime infrastructure 2.1 servers. I have configured manual HA between the servers. I need to know what will be the configuration in the devices ( switches,routers etc.) for proper working of the HA. For example
Should we need to configure both the prime infra servers as snmp hosts in the devices??. If we have to when an event happens the switch well unnecessarily send the traps to the secondary even when the primary is alive??.
If anyone has a copy of the configuration of such a set up please share it with me.
Thanks and Regards
ShabeebHi Shabeeb,
You are correct on that part that unnecessarily devices will try to send traps to the secondary server if you specify that in the device's config. I don't think it should be a concern , this is expected.
otherwise you need to configure them later once the PI server fail over to secondary .
If you have any other doubt ,kindly ask.
Thanks-
Afroz
***Ratings Encourages Contributors *** -
Cisco Prime LMS High Availability
Hi,
I am trying to setup prime LMS 4.2 with a pair of soft appliance. As I understand that HA is possible with the use of veritas/vmware for windows/solaris; I was wondering what are the possible high availability options available with a pair of prime LMS appliances? Can it form active/secondary with data synchronization/data redundancy of the LMS on top of the traditional backup/restore of the lms?
Any input is appreciated.
ThanksAs iceman said, in VMWare it is not needed to have a pair of host machines to configure HA. Pairs are managed using third party HA services like veritas.
In VMWare's HA concept all Host machines are pooled into one cluster and in case of host failure the entire cluster is moved to another host. vMotion can also help to move the entire vm to another host.
This is when the host fails where vm resides. In case of failure of vm itself, the HA can be set for various actions lilke Automatic restart when hardware or OS failure is detected. OR it can restart another backup host in other cluster when failure is detected.
You need to check availble HA option on VMWare and you can consider HA options via third party applications like veritas as well.
-Thanks
Vinod
**Support Contributors. Rate them. ** -
High availability error on presence
Good Day,
I have problem with HA on cisco presence cluster , the error is showing that Node status for the high avaliability is (Running in Backup Mode) and Node Reason (Peer Down During Initialization).
I have restart Sip proxy service as request from document but it's the same Any Help ASAP please
please see the attached
Regards
AymanHello
It seems that the checkbox "Enable High Availability" just above your screenshot is not checked.
See status message and solutions with this link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_6/english/install_upgrade/deployment/guide/dgcupc.html
You can try
- Utils system restart of CUPS Publisher
- Wait 10 minutes
- Utils system restart of CUPS Subscriber
Then when both servers are up
- Uncheck HA and Save
- Check HA and Save
- Click on Rebalance users if load sharing is needed
JC -
Advice Requested - High Availability WITHOUT Failover Clustering
We're creating an entirely new Hyper-V virtualized environment on Server 2012 R2. My question is: Can we accomplish high availability WITHOUT using failover clustering?
So, I don't really have anything AGAINST failover clustering, and we will happily use it if it's the right solution for us, but to be honest, we really don't want ANYTHING to happen automatically when it comes to failover. Here's what I mean:
In this new environment, we have architected 2 identical, very capable Hyper-V physical hosts, each of which will run several VMs comprising the equivalent of a scaled-back version of our entire environment. In other words, there is at least a domain
controller, multiple web servers, and a (mirrored/HA/AlwaysOn) SQL Server 2012 VM running on each host, along with a few other miscellaneous one-off worker-bee VMs doing things like system monitoring. The SQL Server VM on each host has about 75% of the
physical memory resources dedicated to it (for performance reasons). We need pretty much the full horsepower of both machines up and going at all times under normal conditions.
So now, to high availability. The standard approach is to use failover clustering, but I am concerned that if these hosts are clustered, we'll have the equivalent of just 50% hardware capacity going at all times, with full failover in place of course
(we are using an iSCSI SAN for storage).
BUT, if these hosts are NOT clustered, and one of them is suddenly switched off, experiences some kind of catastrophic failure, or simply needs to be rebooted while applying WSUS patches, the SQL Server HA will fail over (so all databases will remain up
and going on the surviving VM), and the environment would continue functioning at somewhat reduced capacity until the failed host is restarted. With this approach, it seems to me that we would be running at 100% for the most part, and running at 50%
or so only in the event of a major failure, rather than running at 50% ALL the time.
Of course, in the event of a catastrophic failure, I'm also thinking that the one-off worker-bee VMs could be replicated to the alternate host so they could be started on the surviving host if needed during a long-term outage.
So basically, I am very interested in the thoughts of others with experience regarding taking this approach to Hyper-V architecture, as it seems as if failover clustering is almost a given when it comes to best practices and high availability. I guess
I'm looking for validation on my thinking.
So what do you think? What am I missing or forgetting? What will we LOSE if we go with a NON-clustered high-availability environment as I've described it?
Thanks in advance for your thoughts!Udo -
Yes your responses are very helpful.
Can we use the built-in Server 2012 iSCSI Target Server role to convert the local RAID disks into an iSCSI LUN that the VMs could access? Or can that not run on the same physical box as the Hyper-V host? I guess if the physical box goes down
the LUN would go down anyway, huh? Or can I cluster that role (iSCSI target) as well? If not, do you have any other specific product suggestions I can research, or do I just end up wasting this 12TB of local disk storage?
- Morgan
That's a bad idea. First of all Microsoft iSCSI target is slow (it's non-cached @ server side). So if you really decided to use dedicated hardware for storage (maybe you do have a reason I don't know...) and if you're fine with your storage being a single
point of failure (OK, maybe your RTOs and RPOs are fair enough) then at least use SMB share. SMB at least does cache I/O on both client and server sides and also you can use Storage Spaces as a back end of it (non-clustered) so read "write back flash cache
for cheap". See:
What's new in iSCSI target with Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn305893.aspx
Improved optimization to allow disk-level caching
Updated
iSCSI Target Server now sets the disk cache bypass flag on a hosting disk I/O, through Force Unit Access (FUA), only when the issuing initiator explicitly requests it. This change can potentially improve performance.
Previously, iSCSI Target Server would always set the disk cache bypass flag on all I/O’s. System cache bypass functionality remains unchanged in iSCSI Target Server; for instance, the file system cache on the target server is always bypassed.
Yes you can cluster iSCSI target from Microsoft but a) it would be SLOW as there would be only active-passive I/O model (no real use from MPIO between multiple hosts) and b) that would require a shared storage for Windows Cluster. What for? Scenario was
usable with a) there was no virtual FC so guest VM cluster could not use FC LUs and b) there was no shared VHDX so SAS could not be used for guest VM cluster as well. Now both are present so scenario is useless: just export your existing shared storage without
any Microsoft iSCSI target and you'll be happy. For references see:
MSFT iSCSI Target in HA mode
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
Cluster MSFT iSCSI Target with SAS back end
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
Guest
VM Cluster Storage Options
http://technet.microsoft.com/en-us/library/dn440540.aspx
Storage options
The following tables lists the storage types that you can use to provide shared storage for a guest cluster.
Storage Type
Description
Shared virtual hard disk
New in Windows Server 2012 R2, you can configure multiple virtual machines to connect to and use a single virtual hard disk (.vhdx) file. Each virtual machine can access the virtual hard disk just like servers
would connect to the same LUN in a storage area network (SAN). For more information, see Deploy a Guest Cluster Using a Shared Virtual Hard Disk.
Virtual Fibre Channel
Introduced in Windows Server 2012, virtual Fibre Channel enables you to connect virtual machines to LUNs on a Fibre Channel SAN. For more information, see Hyper-V
Virtual Fibre Channel Overview.
iSCSI
The iSCSI initiator inside a virtual machine enables you to connect over the network to an iSCSI target. For more information, see iSCSI
Target Block Storage Overviewand the blog post Introduction of iSCSI Target in Windows
Server 2012.
Storage requirements depend on the clustered roles that run on the cluster. Most clustered roles use clustered storage, where the storage is available on any cluster node that runs a clustered
role. Examples of clustered storage include Physical Disk resources and Cluster Shared Volumes (CSV). Some roles do not require storage that is managed by the cluster. For example, you can configure Microsoft SQL Server to use availability groups that replicate
the data between nodes. Other clustered roles may use Server Message Block (SMB) shares or Network File System (NFS) shares as data stores that any cluster node can access.
Sure you can use third-party software to replicate 12TB of your storage between just a pair of nodes to create a fully fault-tolerant cluster. See (there's also a free offering):
StarWind VSAN [Virtual SAN] for Hyper-V
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
Product is similar to what VMware had just released for ESXi except it's selling for ~2 years so is mature :)
There are other guys doing this say DataCore (more playing for Windows-based FC) and SteelEye (more about geo-cluster & replication). But you may want to give them a try.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
SharePoint 2013 High Availability - BI Semantic
SharePoint 2013 High Availability
Hi all,
Settings
Two Sites connected via tunnel, no issue in networking – Single farm
SQL2012, two DB with mirroring
SharePoint 2013, two servers in the farm, each server is APP & WEB
Issue, this has been designed against full site failure (e.g. losing connection to other site, which means losing 1 SQL and 1 SP server)
When users try to view some reports from the BI page, they can’t , we have confirmed that SQL mirrors are failing correctly, the issue (we think to be to access the SharePoint reporting services DB which we have mirrored as well), any help will be great.
RegardsOkay, if you've validated that you have the 1Gbps and 1ms over 10 minutes average, then you're in a supported scenario. How did you configure the SSRS databases to use mirroring within SharePoint? With SSRS databases, you'll need to use PowerShell:
$database = Get-SPDatabase | where {$_.Name -eq "ReportingServiceDbName"}
$database.AddFailoverServiceInstance("InstanceName")
$database.Update()
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Transaction Log Truncate not working on Sql Server 2012 High Availability Groups
Hi Everyone
Firstly I have tried to search the forum for similar issues but can't seem to find any that match our situation.
We have a SQL Server 2012 High Availability Group with 2 Nodes
Node 1 = Primary
Node 2 = Secondary
Backup Schedule as follows
Full Database Backup @ 00:00
Transaction Log Backup every 30 minutes from 00:30:00 till 23:59:59.
These backups are run by Maintenance Jobs, but we have also tried doing direct backups in SSMS using Backup Database and Backup Log commands.
Before we configured the High Availability group the transaction log backups worked fine.
After we configured the High Availability group we performed a Full Backup and the T-Log schedule did the T-Log backup. The 1st T-log backup truncated the log (Used space Decreased) as expected.
However subsequent T-Log backups do not truncate the T-Log.
This happens both in our acceptance and Live environments. This also happens when running the backups as a Backup operator and sysadmin, this does not seem to be a permissions issue at all.
We have tried running the Backup on the Primary and Secondary Replica.
What about High Availability groups could stop Transaction Log Backups from not truncating the log?
Thanks
JamesHi Sean
Thank you for your reply, please see the output of the sys.databases query below, and some others which you may find usefull.
Query: select database_id,recovery_model_desc, log_reuse_wait, log_reuse_wait_desc from sys.databases
where database_id = 5
Result: database_id recovery_model_desc log_reuse_wait log_reuse_wait_desc
5
FULL 0
NOTHING
I also ran the following
select database_id, truncation_lsn, last_received_lsn, last_commit_lsn, last_hardened_lsn, last_redone_lsn,*
from sys.dm_hadr_database_replica_states
go
database_id
truncation_lsn
last_received_lsn
last_commit_lsn
last_hardened_lsn
last_redone_lsn
database_id
group_id
replica_id
group_database_id
is_local
synchronization_state
synchronization_state_desc
is_commit_participant
synchronization_health
synchronization_health_desc
database_state
database_state_desc
is_suspended
suspend_reason
suspend_reason_desc
recovery_lsn
truncation_lsn
last_sent_lsn
last_sent_time
last_received_lsn
last_received_time
last_hardened_lsn
last_hardened_time
last_redone_lsn
last_redone_time
log_send_queue_size
log_send_rate
redo_queue_size
redo_rate
filestream_send_rate
end_of_log_lsn
last_commit_lsn
last_commit_time
low_water_mark_for_ghosts
5
1231833000417170000000
1231833000418880000000
1231833000418880000000
1231833000418890000000
1231833000418880000000
5
1391A499-3F9A-47D5-BCE0-70BC204E2A5B
7E8BFC2E-363F-4C48-86F0-C276D3E0C8D9
0581E17A-6B7B-4B8F-9288-BF765BFBCE77
0
2
SYNCHRONIZED
1
2
HEALTHY
NULL
NULL
0
NULL
NULL
4294967295429490000000000
1231833000417170000000
1
41863
1231833000418880000000
41863
1231833000418890000000
41863
1231833000418880000000
41863
0
25541
0
84404
75304
1231833000418880000000
1231833000418880000000
41863
441019861
5
1231833000417170000000
NULL
1231833000418880000000
1231833000418890000000
NULL
5
1391A499-3F9A-47D5-BCE0-70BC204E2A5B
83B9F00E-D63F-4AC0-98FC-35E48FFA2C6F
0581E17A-6B7B-4B8F-9288-BF765BFBCE77
1
2
SYNCHRONIZED
1
2
HEALTHY
0
ONLINE
0
NULL
NULL
4294967295429490000000000
1231833000417170000000
NULL
NULL
NULL
NULL
1231833000418890000000
NULL
NULL
NULL
NULL
NULL
NULL
NULL
NULL
1231833000418880000000
1231833000418880000000
41863
441019861
And
dbcc loginfo
go
RecoveryUnitId
FileId
FileSize
StartOffset
FSeqNo
Status
Parity
CreateLSN
0
2
458752
8192
1231828
0
128
0
0
2
458752
466944
1231829
0
128
0
0
2
458752
925696
1231830
0
128
0
0
2
712704
1384448
1231831
0
128
0
0
2
19398656
2097152
1231832
0
128
1229654000000040000000
0
2
10199171072
21495808
1231833
2
128
1229656000000010000000
0
2
10199171072
10220666880
0
0
64
1229656000000010000000
0
2
10199171072
20419837952
1231827
0
64
1229656000000010000000
0
2
10199171072
30619009024
0
0
128
1229656000000010000000
0
2
10199171072
40818180096
0
0
128
1229656000000010000000
0
2
10199171072
51017351168
0
0
128
1229656000000010000000
0
2
10199171072
61216522240
0
0
128
1229656000000010000000
0
2
10199171072
71415693312
0
0
128
1229656000000010000000
0
2
10199171072
81614864384
0
0
128
1229656000000010000000
0
2
536870912
91814035456
0
0
64
1229989001661260000000
0
2
536870912
92350906368
0
0
64
1229989001661260000000
0
2
536870912
92887777280
0
0
64
1229989001661260000000
0
2
536870912
93424648192
0
0
64
1229989001661260000000
0
2
536870912
93961519104
0
0
64
1229989001661260000000
0
2
536870912
94498390016
0
0
64
1229989001661260000000
0
2
536870912
95035260928
0
0
64
1229989001661260000000
0
2
536870912
95572131840
0
0
64
1229989001661260000000
0
2
536870912
96109002752
0
0
64
1229989001661260000000
0
2
536870912
96645873664
0
0
64
1229989001661260000000
0
2
536870912
97182744576
0
0
64
1229989001661260000000
0
2
536870912
97719615488
0
0
64
1229989001661260000000
0
2
536870912
98256486400
0
0
64
1229989001661260000000
0
2
536870912
98793357312
0
0
64
1229989001661260000000
0
2
536870912
99330228224
0
0
64
1229989001661260000000
0
2
536870912
99867099136
0
0
64
1229989001661260000000
0
2
536870912
100403970048
0
0
64
1229995000058520000000
0
2
536870912
100940840960
0
0
64
1229995000058520000000
0
2
536870912
101477711872
0
0
64
1229995000058520000000
0
2
536870912
102014582784
0
0
64
1229995000058520000000
0
2
536870912
102551453696
0
0
64
1229995000058520000000
0
2
536870912
103088324608
0
0
64
1229995000058520000000
0
2
536870912
103625195520
0
0
64
1229995000058520000000
0
2
536870912
104162066432
0
0
64
1229995000058520000000
0
2
536870912
104698937344
0
0
64
1229995000058520000000
0
2
536870912
105235808256
0
0
64
1229995000058520000000
0
2
536870912
105772679168
0
0
64
1229995000058520000000
0
2
536870912
106309550080
0
0
64
1229995000058520000000
0
2
536870912
106846420992
0
0
64
1229995000058520000000
0
2
536870912
107383291904
0
0
64
1229995000058520000000
0
2
536870912
107920162816
0
0
64
1229995000058520000000
0
2
536870912
108457033728
0
0
64
1229995000058520000000
0
2
536870912
108993904640
0
0
64
1230004000028400000000
0
2
536870912
109530775552
0
0
64
1230004000028400000000
0
2
536870912
110067646464
0
0
64
1230004000028400000000
0
2
536870912
110604517376
0
0
64
1230004000028400000000
0
2
536870912
111141388288
0
0
64
1230004000028400000000
0
2
536870912
111678259200
0
0
64
1230004000028400000000
0
2
536870912
112215130112
0
0
64
1230004000028400000000
0
2
536870912
112752001024
0
0
64
1230004000028400000000
0
2
536870912
113288871936
0
0
64
1230004000028400000000
0
2
536870912
113825742848
0
0
64
1230004000028400000000
0
2
536870912
114362613760
0
0
64
1230004000028400000000
0
2
536870912
114899484672
0
0
64
1230004000028400000000
0
2
536870912
115436355584
0
0
64
1230004000028400000000
0
2
536870912
115973226496
0
0
64
1230004000028400000000
0
2
536870912
116510097408
0
0
64
1230004000028400000000
0
2
536870912
117046968320
0
0
64
1230004000028400000000
0
2
536870912
117583839232
0
0
64
1230012000103140000000
0
2
536870912
118120710144
0
0
64
1230012000103140000000
0
2
536870912
118657581056
0
0
64
1230012000103140000000
0
2
536870912
119194451968
0
0
64
1230012000103140000000
0
2
536870912
119731322880
0
0
64
1230012000103140000000
0
2
536870912
120268193792
0
0
64
1230012000103140000000
0
2
536870912
120805064704
0
0
64
1230012000103140000000
0
2
536870912
121341935616
0
0
64
1230012000103140000000
0
2
536870912
121878806528
0
0
64
1230012000103140000000
0
2
536870912
122415677440
0
0
64
1230012000103140000000
0
2
536870912
122952548352
0
0
64
1230012000103140000000
0
2
536870912
123489419264
0
0
64
1230012000103140000000
0
2
536870912
124026290176
0
0
64
1230012000103140000000
0
2
536870912
124563161088
0
0
64
1230012000103140000000
0
2
536870912
125100032000
0
0
64
1230012000103140000000
0
2
536870912
125636902912
0
0
64
1230012000103140000000
0
2
536870912
126173773824
0
0
128
1230338000973820000000
0
2
536870912
126710644736
0
0
128
1230338000973820000000
0
2
536870912
127247515648
0
0
128
1230338000973820000000
0
2
536870912
127784386560
0
0
128
1230338000973820000000
0
2
536870912
128321257472
0
0
128
1230338000973820000000
0
2
536870912
128858128384
0
0
128
1230338000973820000000
0
2
536870912
129394999296
0
0
128
1230338000973820000000
0
2
536870912
129931870208
0
0
128
1230338000973820000000
0
2
536870912
130468741120
0
0
128
1230338000973820000000
0
2
536870912
131005612032
0
0
128
1230338000973820000000
0
2
536870912
131542482944
0
0
128
1230338000973820000000
0
2
536870912
132079353856
0
0
128
1230338000973820000000
0
2
536870912
132616224768
0
0
128
1230338000973820000000
0
2
536870912
133153095680
0
0
128
1230338000973820000000
0
2
536870912
133689966592
0
0
128
1230338000973820000000
0
2
536870912
134226837504
0
0
128
1230338000973820000000
0
2
536870912
134763708416
0
0
128
1230338001901440000000
0
2
536870912
135300579328
0
0
128
1230338001901440000000
0
2
536870912
135837450240
0
0
128
1230338001901440000000
0
2
536870912
136374321152
0
0
128
1230338001901440000000
0
2
536870912
136911192064
0
0
128
1230338001901440000000
0
2
536870912
137448062976
0
0
128
1230338001901440000000
0
2
536870912
137984933888
0
0
128
1230338001901440000000
0
2
536870912
138521804800
0
0
128
1230338001901440000000
0
2
536870912
139058675712
0
0
128
1230338001901440000000
0
2
536870912
139595546624
0
0
128
1230338001901440000000
0
2
536870912
140132417536
0
0
128
1230338001901440000000
0
2
536870912
140669288448
0
0
128
1230338001901440000000
0
2
536870912
141206159360
0
0
128
1230338001901440000000
0
2
536870912
141743030272
0
0
128
1230338001901440000000
0
2
536870912
142279901184
0
0
128
1230338001901440000000
0
2
536870912
142816772096
0
0
128
1230338001901440000000
0
2
536870912
143353643008
0
0
128
1230346000103040000000
0
2
536870912
143890513920
0
0
128
1230346000103040000000
0
2
536870912
144427384832
0
0
128
1230346000103040000000
0
2
536870912
144964255744
0
0
128
1230346000103040000000
0
2
536870912
145501126656
0
0
128
1230346000103040000000
0
2
536870912
146037997568
0
0
128
1230346000103040000000
0
2
536870912
146574868480
0
0
128
1230346000103040000000
0
2
536870912
147111739392
0
0
128
1230346000103040000000
0
2
536870912
147648610304
0
0
128
1230346000103040000000
0
2
536870912
148185481216
0
0
128
1230346000103040000000
0
2
536870912
148722352128
0
0
128
1230346000103040000000
0
2
536870912
149259223040
0
0
128
1230346000103040000000
0
2
536870912
149796093952
0
0
128
1230346000103040000000
0
2
536870912
150332964864
0
0
128
1230346000103040000000
0
2
536870912
150869835776
0
0
128
1230346000103040000000
0
2
536870912
151406706688
0
0
128
1230346000103040000000
0
2
536870912
151943577600
0
0
128
1230355000086930000000
0
2
536870912
152480448512
0
0
128
1230355000086930000000
0
2
536870912
153017319424
0
0
128
1230355000086930000000
0
2
536870912
153554190336
0
0
128
1230355000086930000000
0
2
536870912
154091061248
0
0
128
1230355000086930000000
0
2
536870912
154627932160
0
0
128
1230355000086930000000
0
2
536870912
155164803072
0
0
128
1230355000086930000000
0
2
536870912
155701673984
0
0
128
1230355000086930000000
0
2
536870912
156238544896
0
0
128
1230355000086930000000
0
2
536870912
156775415808
0
0
128
1230355000086930000000
0
2
536870912
157312286720
0
0
128
1230355000086930000000
0
2
536870912
157849157632
0
0
128
1230355000086930000000
0
2
536870912
158386028544
0
0
128
1230355000086930000000
0
2
536870912
158922899456
0
0
128
1230355000086930000000
0
2
536870912
159459770368
0
0
128
1230355000086930000000
0
2
536870912
159996641280
0
0
128
1230355000086930000000
0
2
536870912
160533512192
0
0
128
1230364000070870000000
0
2
536870912
161070383104
0
0
128
1230364000070870000000
0
2
536870912
161607254016
0
0
128
1230364000070870000000
0
2
536870912
162144124928
0
0
128
1230364000070870000000
0
2
536870912
162680995840
0
0
128
1230364000070870000000
0
2
536870912
163217866752
0
0
128
1230364000070870000000
0
2
536870912
163754737664
0
0
128
1230364000070870000000
0
2
536870912
164291608576
0
0
128
1230364000070870000000
0
2
536870912
164828479488
0
0
128
1230364000070870000000
0
2
536870912
165365350400
0
0
128
1230364000070870000000
0
2
536870912
165902221312
0
0
128
1230364000070870000000
0
2
536870912
166439092224
0
0
128
1230364000070870000000
0
2
536870912
166975963136
0
0
128
1230364000070870000000
0
2
536870912
167512834048
0
0
128
1230364000070870000000
0
2
536870912
168049704960
0
0
128
1230364000070870000000
0
2
536870912
168586575872
0
0
128
1230364000070870000000
0
2
536870912
169123446784
0
0
128
1230373000054750000000
0
2
536870912
169660317696
0
0
128
1230373000054750000000
0
2
536870912
170197188608
0
0
128
1230373000054750000000
0
2
536870912
170734059520
0
0
128
1230373000054750000000
0
2
536870912
171270930432
0
0
128
1230373000054750000000
0
2
536870912
171807801344
0
0
128
1230373000054750000000
0
2
536870912
172344672256
0
0
128
1230373000054750000000
0
2
536870912
172881543168
0
0
128
1230373000054750000000
0
2
536870912
173418414080
0
0
128
1230373000054750000000
0
2
536870912
173955284992
0
0
128
1230373000054750000000
0
2
536870912
174492155904
0
0
128
1230373000054750000000
0
2
536870912
175029026816
0
0
128
1230373000054750000000
0
2
536870912
175565897728
0
0
128
1230373000054750000000
0
2
536870912
176102768640
0
0
128
1230373000054750000000
0
2
536870912
176639639552
0
0
128
1230373000054750000000
0
2
536870912
177176510464
0
0
128
1230373000054750000000
0
2
536870912
177713381376
0
0
128
1230382000038660000000
0
2
536870912
178250252288
0
0
128
1230382000038660000000
0
2
536870912
178787123200
0
0
128
1230382000038660000000
0
2
536870912
179323994112
0
0
128
1230382000038660000000
0
2
536870912
179860865024
0
0
128
1230382000038660000000
0
2
536870912
180397735936
0
0
128
1230382000038660000000
0
2
536870912
180934606848
0
0
128
1230382000038660000000
0
2
536870912
181471477760
0
0
128
1230382000038660000000
0
2
536870912
182008348672
0
0
128
1230382000038660000000
0
2
536870912
182545219584
0
0
128
1230382000038660000000
0
2
536870912
183082090496
0
0
128
1230382000038660000000
0
2
536870912
183618961408
0
0
128
1230382000038660000000
0
2
536870912
184155832320
0
0
128
1230382000038660000000
0
2
536870912
184692703232
0
0
128
1230382000038660000000
0
2
536870912
185229574144
0
0
128
1230382000038660000000
0
2
536870912
185766445056
0
0
128
1230382000038660000000
The create LSN column seems to have been truncated so here is is again, sorry for the bulky reply.
CreateLSN
0
0
0
0
1229654000000041600001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229656000000012000001
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229989001661260800316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1229995000058525600316
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230004000028405600295
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230012000103148800147
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338000973824800555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230338001901449600555
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230346000103044000554
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230355000086934400510
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230364000070872800554
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230373000054757600431
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
1230382000038664800234
Thanks
James
Maybe you are looking for
-
How do I configure the 2504 Wireless controller with AP?
I recently purchase the 2504 wireless controller and the 1602i AP. I was able to do the basic setup of the controller and can now access the web interface, but the AP is not being detected and I am unable to add it.
-
JPGs exported from Lightroom 5.6 will not open in other applications
Recently I have noticed that jpgs exported from Lightroom 5.6 can not be opened in Canon DPP 3.14 and can not be resized using Image Resizer plugin. Both of these I use frequently. I have seen mention of this issue re other applications also. Does an
-
How to get the backup of photos from i cloud id ?
plz provide me the answers as soon as possible.
-
Hello Everyone, Is there a way to delete the SMQ2 queues in SRM? We have thousands of records and we do not want to delete each queue manually. Any help to get this? Regards, Khushbu.
-
SQL server compatible with Epson Scanner
I have Windows SQL server 2012 RS and can not get my Epson Scanner to connect. I know that Epson does not have a driver for this OS but wondered if there was some type of work around for me to be able to use my scanner. thanks! Brianna