Cisco DCNM 6.2 does not support most of the switches in my network

Hi All,
I have just installed Cisco DCNM 6.2. I have run a discovery using SNMP v1 my core switch which is a 3750G stack. DCNM discovers all my switches but does not support the 2960 and 3750 switches. The only switches I can select to manage and are supported are a 4510 and 3550. I have also run another discovery using SNMPv3 on a different core switch (Nexus 3K) at one of our remote sites. DCNM found all the other 2960s in that network but I can only select the two Nexus switches in the core to manage. What do I need to do to be able to manage all my switches switch?
Thank you in advance.

Hello,
DCNM is meant for data centre network management and as such only supports the MDS, Nexus and the 6500 series switches, see the RN under supported Cisco platforms and software:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/dcnm/release/notes/dcnm_6_2_5a_relnotes.html#pgfId-314209
For the discovery issue DCNM should 'see' the other devices so you need to have a look at your SNMP and CDP (used for neighbour discovery on a per hop basis) settings on each of the devices.
For an software package to manage LAN/WAN environments you really need to be looking at Cisco Prime LMS.
We are going through the same problem, it would be nice to be able to manage the DC and LAN from DCNM.
Regards
Daniel Hunter

Similar Messages

  • Re: Satellite Pro A300 - DVD drawer does not open most of the time

    I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
    Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
    Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
    Can anyone tell a novice what I need to do to sort this out please?

    Have you noticed this when you try to open drawer using eject button in the drawer itself?
    Almost every player has integrated eject button. Can the drawer be opened using this eject button?

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

  • After downloading album covers (some not found) itunes does not show most of the covers.

    After downloading album covers into iTunes iTunes does not show most of the covers. It showas blank white boxes except for those where "cover not found" (music notes).
    You have any idea how this happens, perhaps with location of the files.

    iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
    By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
    You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
    With best regards,
    lyravega, goekhan.

  • Captivate 7 App packager Browser does not support some of the content message

    Hi
    I have succesfully creating a training app using the app packager for IOS (and to a certain extent android), however when you start the app a message starts up saying :"This browser does not support some of the content in the file you are trying to view.  Use IE 9 or later, Safari 5.1 or later etc. "  The interesting thing is that I am using the latest versions of both safari and chrome?
    I checked out the javascript and and althouth there is an "if then" test, clearly it is not testing correctly.  Has someone got a fix for this e.g. modifications to the code to make it work?
    Regards
    Mark

    Hi Phani
    Attached please find the ini file as requested.
    I look forward to your response.
    Kind regards
    Mark
    Geometric Progression
    Cutting thru complexity
    Tel:   (+2721) 794 8332 or (0861) 000-615
    Fax:   (+27 11) 252 8089 
    Website:  <http://www.gpifm.com/> http://www.gpifm.com
    Authorised FSP (Licence No: 43224)
    Bankseta accredited (No:557066)
    BOTA accredited
    <http://lnkd.in/sybY4S> linkedin3

  • Leopard does not support reading/writing to SD card via network?

    I have a Pixma MX700. I can read and write to SD cards using the card reader built into this machine ... IF I use Windows XP. Leopard will mount the card and allow me to view it contents but the minute I try to import a file to my iMac, I get error code 1401.
    I've been told by Canon support that the new MP Navigator EX driver for Leopard disables reading from the memory card over a network. They claim Leopard does not support this function and reading the posts from others having the same issue using different multi-function printers, this would appear to be a Leopard issue, not a Canon issue.
    Can anyone confirm this and/or offer a fix?
    Thanks!

    Hi,
    Could you check for SAP Note   1952701 - DBSL supports new HANA version number
    Regards,
    Gaurav

  • HT201401 My iphone 5 volumn down button does not work most of the time. it feels fine.  in an otterbox defender. this is my second iphone that it is doing the same thing.

    i have a iphone 5. the volume button going down only does not work.  this is my second phone with the same problem.  i have had otterboxes for both phones.

    Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.

  • CS6 & OSX 10.6.8 - saving files directly to the server does not work (most of the time)

    Hi there,
    we just switched from OSX 10.5.8 to 10.6.8
    OSX was installed on a new partition of the harddisk
    Then installed CS 5
    Then installed CS 6 via (adobe creative cloud)
    With CS6 we got also the problem with saving files to the server (program error)
    It happens mostly with photoshop, sometimes with Illustrator.
    I read a lot of posting regarding the same problem but didn´t found a real solution yet.
    I am also wondering that there seems to be no solution for this now, because most of the posting i read are 1 year old.
    Working locally is not really an acceptable workaround for us or anyone who needs to work with Creative Suite in a professional way.
    Our MACs…
    MAC Pro 4.1
    OSX 10.6.8
    Virtualized Server Solaris 10 with Helios UB+
    connected to server with afp://Server IP Adress
    Adobe Software
    CS 5 & CS 6
    Here´s some additional information from the osx system profiler:
    Hardware-Übersicht:
      Modellname:          Mac Pro
      Modell-Identifizierung:          MacPro4,1
      Prozessortyp:          Quad-Core Intel Xeon
      Prozessorgeschwindigkeit:          2,26 GHz
      Anzahl der Prozessoren:          2
      Gesamtzahl der Kerne:          8
      L2-Cache (pro Kern):          256 KB
      L3-Cache (pro Prozessor):          8 MB
      Speicher:          10 GB
      Geschwindigkeit für Prozessorverbindungstyp:          5.86 GT/s
      Boot-ROM-Version:          MP41.0081.B07
      SMC-Version (System):          1.39f5
      SMC-Version (Prozessormodul):          1.39f5
      Seriennummer (System):          CK9120Z98Q0
      Seriennummer (Prozessormodul):          J590807P51LUC    
      Hardware-UUID:          30149BDB-582E-583A-B776-59A6DEA2A32C
    Ethernet 1:
      Typ:          Ethernet
      Hardware:          Ethernet
      BSD-Gerätename:          en0
      IPv4-Adressen:          192.9.200.120
      IPv4:
      Adressen:          192.9.200.120
      Konfigurationsmethode:          Manuell
      Schnittstellen-Name:          en0
      Netzwerksignatur:          IPv4.Router=192.9.200.203;IPv4.RouterHardwareAddress=00:30:48:ba:70:30
      Router:          192.9.200.203
      Teilnetzmasken:          255.255.255.0
      DNS:
      Such-Domains:          floramedia.int
      Serveradressen:          192.9.200.7, 194.25.0.68
      Ethernet:
      MAC-Adresse:          00:23:df:df:96:e1
      Medienoptionen:          Voll-Duplex
      Medien-Untertyp:          1000baseT
      Proxies:
      Ausnahmeliste:          *.local, 169.254/16
      Passiver FTP-Modus:          Ja
      Reihenfolge der Dienste:          0
    Überblick über die Systemsoftware:
      Systemversion:          Mac OS X 10.6.8 (10K549)
      Kernel-Version:          Darwin 10.8.0
      Startvolume:          MAC_OSX_10_6_x_SNOW-LEOPARD
      Startmodus:          Normal
      Gerätename:          Freelancers Mac Pro 10.6.8
      Benutzername:          DENNIS (freelancer)
      Sicherer virtueller Speicher:          Nicht aktiviert
      64-Bit-Kernel and -Erweiterungen:          Nein
      Zeit seit dem Start:          8:09

    Hi franverdi-
    It sounds like you've run into issues from the upgrade. I've found a Support article that helps with issues of not being able to connect after an upgrade:
    [[Cannot connect after upgrading Firefox]]
    I hope that helps!

  • Hold switch does not keep on - is the switch broken?

    Hi. My faithful 5th gen. iPod started to stand on its own - it didn't like to obey my wish for keeping hold switch on or off. It is on, all the time. So, is this a sign for independence or resignation? In other words, is the switch physically broken or not? I've done all those restarts etc. Regards, T.

    Thanks for the quick reply. I have performed all the R's except Restore. When I try to restore the process begins, the status window opens, then an "Auto Play" window opens in the upper left side of my computer screen and I can see song titles from my Library flashing by. After a few seconds the "Auto Play" window closes, the status window closes, and and error message window appears saying that the restore process has ended due to an unknown problem. I've tried to run the Restore process several times with the same result. I am running iTunes 7.0.1.8 and the summary info in iTunes says that my iPod is up to date. Where do I go from here?

  • Please tell me all the sound specs i need to set up in logic x to have success recording; my output channel does not output most of the time; i use analog lab as well

    please help me set up all the sound specs/preferences both hardware and software wise for logic x on mac book pro...i am unable to hear any audio playback when i record a track...no activity in output channel

    itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
    if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

  • Weblogic does not support failover for the admin server.

    There is a single point of failure in the current weblogic architecture. If the
    admin server dies there is no automatic alternate admin server.

    That is true, and we plan to fix it in one of the next major releases. Currently
    the story is not as bad as it appears to be for following reasons:
    1. Failure of admin server doesn't mean failure of already running managed server.
    2. You can start a new server as admin server of domain with discover flag=true and
    it will recognize all already exisiting managed server.
    Viresh Garg
    Principal Developer Relations Engineer
    BEA Systems
    naresh gupta wrote:
    There is a single point of failure in the current weblogic architecture. If the
    admin server dies there is no automatic alternate admin server.

  • My home button does not respond most of the time. Is this a hardware failure?

    I've had quite a bit of difficulty with getting my home button to respond. Sometimes, the only way to get back to the home screen is to do a hard reset. I constantly close any open apps, thinking that this might be the problem (memory issue).
    Hoping you can help!
    Thanks!

    See:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button

  • IMac PC does not support latest Adobe FP/can't watch Youtube/Only solution=new computer??

    I can no longer watch You Tube because the latest version of Adobe Flash Player
    will not download to a PPC. I run Tiger 10.4.11 (I know that's ancient but it works
    very well!) Does this mean the only way to view You Tube would be to buy a new
    computer? Everything runs perfectly except You Tube. I've never been a big fan of the site
    I still would like to have access to it but buying a new computer to get one site seems
    like a bridge too far. I have Adobe flash Player and but not the latest version.
    This problem only happened recently which seems strange. I even have a
    couple of videos on the site and have access to my account. I can get the site and my account but
    first the sound stopped playing a month or two ago but the videos still played. Now the videos
    don't play at all. From what I've heard, only a computer with Intel can accept the latest version of
    Adobe. Any thoughts or tips??

    It will work on a PPC Mac running Leopard, but not Tiger:
    I am in the same boat. I run a G5 PPC iMac and I cannot watch flash videos on the BBC website or on BBC iPlayer, and it struggles on YouTube.
    For reasons that passeth all understanding, they all work with the PPC version of Firefox, called TenFourFoxG5.app, once you have enabled plug-ins, as it does not natively support Flash.
    You can download TenFourFoxG5 from here:
    http://www.floodgap.com/software/tenfourfox/
    Now for the interesting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
    http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    But there is a workaround!
    Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
    Look/search (scroll down) for: tenfourfox.plugins.enabled
    Set it to true. (Double click it to toggle it)
    Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
    I am using Flash 11.5.502.55 in TenFourFox and it works just fine. Here is how to get a working version of Flash Player:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*.
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Front Row does not support Airtunes in Leopard

    Can anyone tell me if I am just doing something wrong or if Leopard does not support airtunes in the new and improved Front Row?

    I'm having the same problem, and it's a big one as one of the main uses for my Mac Mini is as a media centre controlling iTunes via the remote!
    I think the root of the problem is that previously (on 10.4) Front Row launched and used iTunes in the background and so it respected whatever setting was current in iTunes.
    It seems to now be using something else (maybe QuickLook) to play it - at least I haven't noticed the same delay when using Front Row when iTunes isn't launched...
    This is something that needs to be rectified soon because one of the driving reasons for my upgrade was the 'new' AppleTV-like Front Row.
    This upgrade has made my Airport Express useless and is tempting me to downgrade and ask for a refund - removing functionality is not a way to get new customers!

  • PSE 8 does not support Nikon 7000D RAW files?

    I just got a Nikon 7000D, and when I tried to open up one of the .NEF (RAW) files in PSE 8, it wasn't supported.  I researched the Camera RAW plug-in, and from what I can tell, PSE 8 is only compatible with Camera RAW up to version 6.2.  It looks like version 6.3 is only useable with PSE 9.
    Camera RAW 6.2 does not support files from the Nikon 7000D, or at least the list I saw does not show it, so I did not download 6.2.  Is my only choice for being able to use PSE 9 with my 7000D to spend the money on PSE 9?   -Bill C

    You could also download the standalone DNG converter and make DNG files (which you may be able to process in 6.2), or use the Nikon software to convert your files and do any additional editing in PSE.

Maybe you are looking for