Cisco devices that support Multicast traffic?

Folks,
I am looking for list of Cisco devices that support Multicast traffic. Does anyone know how to get this information?
Thanks,
Nagesh

Cisco Feature Navigator

Similar Messages

Does anyone know if movies I purchase from itunes will also work on an android device that supports mp4?

Does anyone know if movies I purchase from itunes will also work on an android device that supports mp4?

They will not.
They ONLY work on itunes/apple devices.

Change hostname on Cisco devices that are in production

I'm new to Cisco devices and to my current job as network analyst. Mostly in an attempt to establish consistency and to ease identification, I'd like to change the hostname of most of our Cisco switches and routers. However, I don't want to create any other problems.
If I proceed with the hostname change on our Cisco devices that are in production, would there be any negative impact that I may expect?
Thanks in advance!

Hi
Couple of things spring to mind
1) DNS resolution. How do you resolve the hostnames for your routers/switches now ?. if you do it via DNS then you need to update it to reflect the new name.
2) Any scripts etc. that you may use to automate taks on your network may need updating although if they use DNS to resolev just see 1
3) SSH. If you are using SSH to manage your routers/switches and you change the hostname the ssh key will become invalid. You will need to regenerate the key.
HTH
Jon

Cisco switches that support IPv6 L2 security

I'm looking for Cisco switches that support IPv6 layer 2 security. The following features are required:
MLDv2 snooping [RFC4541]
DHCPv6 snooping [RFC3315]
DHCPv6 messages must be blocked between subscribers and the network so that false DHCPv6 servers cannot distribute addresses.
Router Advertisement (RA) filtering [RFC4862, RFC5006]
RA filtering must be used in the network to block unauthorised RA messages.
Dynamic "IPv6 neighbour solicitation/advertisement" inspection [RFC4862]
There must be an IPv6 neighbour solicitation/advertisement inspection, as in IPv4 "Dynamic ARP Inspection". The table with MAC-address and link-local and other assigned IPv6-addresses must be dynamically created by SLAAC or DHCPv6 messages.
Neighbour Unreachability Detection [NUD, RFC4861] filtering
There must be a NUD filtering function to ensure that false NUD messages cannot be sent.
Duplicate Address Detection [DAD, RFC4429] snooping and filtering
Only authorised addresses may be allowed as source IPv6 addresses in DAD messages from each port.
Source: http://www.ripe.net/ripe/docs/ripe-501
I've looked around in some configuration guides for some Cisco access switches but I can't seem to find any switch supporting these functionalities.

See if this helps.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
You may also want to consult with your sales team.
What is the application?

Devices that supports JAVAFX

Hi,
Please tell me mobile devices that support JavaFX.

A search on this forum will probably give more precise answers, but I have seen recently in a thread that JavaFX is currently supported only by devices with Windows Mobile 6.5.

MPLS to support multicast traffic

Dear Gurus,
Does EoMPLS passes multicast traffic? Before my customer can pass multicast traffic (video) thru our Metro-Ethernet network. What we did is migrate the connection to our EoMPLS network, and then suddenly the video is not working.
Thanks.
Jeff

Hi Laurent,
Its just modulator that converts some analog videos to digital but uses multicast, the multicast data are transmiited by the modulator and received on the other end by the demod. Below is the topology
Before:
Modulator----metro-ethernet----metro-ethernet----demodulator
Current Setup:
Modulator----metro-ethernet---MPLS-ROUTER-----------------MPLS-ROUTER---metro-ethernet----demodulator
tia.

2012 LG TV devices that support Adobe Air?

Do all of the 2012 line of LG devices support Adobe Air for TV?
If not, is there a list of devices that do and don't?

I posted the same question of LG's TV developer site (http://developer.lgappstv.com) and someone (who I think worked for LG) responded saying that all devices of the 2012 line support Air for TV. What's more, their documentation implies that LG supports the latest version (3.0) of Air for TV.

Can Cisco Device Manager Support ACS Authentication?

Background:
My company has approximately 500+ devices all across the country (mainly 2801's, 2924's, 2950's, and 2960's) and approx 3 people that have a real idea of how to configure the devices, and 2 or 3 that have a general clue about how to do it. I am in the process of moving all of these devices to use ACS authentication for signing into the device. While I am doing this I am establishing a strong password for the secret password to provide as a backup.
Problem:
My supervisor would like the cisco device manager to be available to the people that don't have the in depth cli experience. However in my testing, it will only accept the strong password for its authentication, and does not try the ACS server for authentication. Is this possible?

Hi,
Actually, there is a difference as from where the authentication is picked from for HTTP authentication,
With HTTP v1 server, same method list is picked, that is used by VTY lines.
With HTTP v1.1 server, but before the integration of fix for bug CSCeb82510, the method list defined for console is checked.
After the fix of the above mentioned bug, we have some different sent of commands that we can use.
I would suggest you to give this a try,
aaa authentication login CONSOLEandHTTP tacacs+ local
aaa authorization exec CONSOLEandHTTP if-authenticated
ip http authentication aaa
line con 0
login authentication CONSOLEandHTTP
authorization exec CONSOLEandHTTP
For detail please refer,
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a008069bdc5.shtml
Regards,
Prem

Managing Cisco Devices That Are Often Offline

In my environment, there are remote network devices that are turned on/off on an as-needed basis. Since we can't know when they'll be on the network, they cause failure alerts in Ciscoworks ( say RME tried to inventory them while they are offline ). Is there a best practice for handling this case? My idea is to create a user group of devices that are excluded from schedule inventory/configuration backups so that we can prevent the alerts.from being generated. However, I don't know if CiscoWorks has this capability .

Hi
Couple of things spring to mind
1) DNS resolution. How do you resolve the hostnames for your routers/switches now ?. if you do it via DNS then you need to update it to reflect the new name.
2) Any scripts etc. that you may use to automate taks on your network may need updating although if they use DNS to resolev just see 1
3) SSH. If you are using SSH to manage your routers/switches and you change the hostname the ssh key will become invalid. You will need to regenerate the key.
HTH
Jon

List of devices that support streaming video?

Does anyone know of a list that details which devices support
streaming video under Flash Lite 2, and ideally what codecs they
support?
I was excited to see Flash Lite 2.1 support for Windows
Mobile, but my T-Mobile SDA doesn't support streaming video through
FL2.

I have a related issue with my T3030 system. The loudspeakers still work fine but the remote volume control cable has a problem, probably a broken lead or faulty contact as in the beginning the sound went away on and off and by twiggling the cable it came back. Now it's completely dead but the green LED still comes on. I went to several CL shops and nobody could help me except to offer me buy a new system but I don't want to do that! So does anyone if I can order the volume control cable separately? Maybe the newer system such as the T300 have the same cable?
Thank you
Johan

Device that Supports WiFi/802.11n Connectivity to ISP.

Hi,
I am looking for an access-point or a router that has DHCP-client enabled on its Wireless side. Imagine all computers/devices are wired and don't support wireless. Here is a diagram:
Service Provider----)))))))) Wi-Fi/802.11a/b/g/n (((((((((((((------Device-I'm-looking-for ------------------ wired computers.
Please advise.
Thanks.

I would think that an 881W would be a good choice here. You can enable DHCP under the wireless interface, and then NAT out of it. then the 881 would provide DHCP to your wired clients.
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Cisco platforms that support TTCP

I would like to test through-put from my routers to a managment station using TTCP. Does anyone know which platforms support TTCP. I am unable to test through-put using TTCP on Cisco 827's.

According to next document:
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094694.shtml
"TTCP requires Cisco IOS® Software Version 11.2 or higher and Feature Sets IP Plus (is- images) or Service Provider (p- images).
Note: The ttcp command is a hidden, unsupported, privileged mode command. As such, its availability may vary from one Cisco IOS software release to another, such that it might not exist in some releases. Some platforms, for instance, require the Cisco IOS Enterprise feature set in order to perform this activity."
HTH

Why doesn't Adobe market an ereader device that supports PDF?

Why do I have to have my books converted to epub format, when customers would just as soon read pdfs, which would be much easier for me to create? I'm told it's because Kindle and the rest of the players aren't supporting pdf. So why doesn't Adobe support it and market it as an ereader platform? They could make money with ereader devices and marketing channels that do support pdf. Adobe's response was to bring out their ereader software, but there are too many of those platforms already. PDF on the other hand has the biggest customer base in the world. Is Adobe missing out here, being focused too exclusively on software and not aware of the kind of opening Amazon jumped on? Kindle has come from nowhere to dominate the market. Adobe could have a good share by marketing a pdf reader. Granted PDF doesn't wrap lines, but if you make the pages small, to fit in an ereader window, there are a lot of advantages to having page numbers too.

I'm also waiting for this feature.

HT201335 Devices that support mirroring on apple tv

i have a macbook pro from sept of 2011 will mirroring work on it

Yes
http://www.apple.com/osx/specs/

Auto Smartports with non-Cisco devices

I have used auto smartports in the past and have been successful creating macros that use mac-addresses.
My question is can I create a macro that works with non-Cisco devices that are CDP capable?
We have Motorolla access points that use CDP and I would like to use auto smartports to put them on their own VLANs.
Can it be done using CDP? What version of the IOS would I need to be on? Currently the 3750-Xs are on 12.2.(55).
Are there any guides or configuration examples? I've searched but have been unsuccessful in find anything so far.
I have seen some articles that reference device sensors and device profiles, but have no idea where to begin.
Thanks in advance for your support.

You may need to create a Cisco TAC case for this.
If not, then move this thread to the EEM section. If the Moto AP supports CDP then you can get someone (like Joe Clark) to build a small EEM script.
EEM is supported up to the 3560/3750.

Cisco devices that support Multicast traffic?

Similar Messages

Maybe you are looking for