Cisco dynamic configuration tool

Currently cisco dynamic configuration tool is not working. What can I do?

Richard,
The power supplies in the 6120 / 6140s are auto sensing for 120-240 VAC. Please see Table 9 in the Nexus 5000 document for all supported cables:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-461802.html
Thank you,
Matthew

Similar Messages

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Configuration tool question

Hi there is a tool where you can assambly a device, I mean put the IOS and check if all the components I want are compatibles.
Can somebody help to find out this tool. Is free but I can not locate it.
Thanks

Hello,
are you referring to the Network Assistant ? Check this link:
Cisco Network Assistant
http://www.cisco.com/en/US/products/ps5931/
Or the Online Configuration Tool:
Cisco Dynamic Configuration Tool
http://www.cisco.com/appcontent/apollo/configureHomeGuest.html
HTH,
GP

Dynamic Configuratio tool

I can't find dynamic configuration tool, has it been removed?

Hi there,
The End of Life or "retirement" of DCT was September 2013;
http://www.cisco.com/E-Learning/gbo-ccw/cdc_bulk/Misc/Legacy_Retirement_for_How_to_Buy_Page.pdf
I believe the replacement is CCW
http://www.cisco.com/E-Learning/gbo-ccw/cdc_bulk/CCW_Configuration_Quick_Reference_Guide_for_Partners.pdf
Cheers!
Rob
"Your life is worth much more than gold."
- Bob Marley

Dynamic configuration of listener in 10g

how can i dynamically configure listener?
if using Oracle configuration tools, then how can i start Oracle configuration tools?
Thanks in advance

See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/listenercfg.htm#i490264
Cheers,
Colin

Dynamic configuration of properties/descriptor files?

Hello all,
I am trying to use configuration files used in j2ee applications (property files, deployment descriptors) in a more dynamic manner. I have been searching for a suitable solution for some time now.
I have come across the following syntax within a configuration or properties file in a legacy project that I am to maintain.
<some-tag>
<some-config value=${theVariable}/>
</some-tag>
Notice the JSTL-like syntax ${theVariable}
The above code comes from an xreg config file, read at startup.
I do not think that there is custom code that parses the file so that it is updated, but I think that this is a pretty cool mechanism for dynamic configuration of applications especially if the properties come from the shell environment variables and can be set at will, or from the java -D option.
If anyone knows anything about this technique please respond to the present mail or to [email protected]
thank you,
Joe
Joe

Hi,
I have very similar requirement, In my scenario I need to pick up files from 4 static locations and based on the file name and pick up type(file/ftp) I can find out the destination's connectivity information from a Cross-Referencing table(Based on MS-SQL Database table- I can get this using look API) in this table we maintaining more than 100 destinations(host/user_name/password etc).
Now I need to set the connectivity information dynamically at runtime. I know this is not possible with Standard XI but does anyone thinks this is possible by any technical way using with XI.. Adapter Modules or Java Proxies?
This is very Critical to win the war with other middleware tools. Please let me know your thoughts and comments...
thanks,
Laxman Molugu

Dynamic Configuration Header is Missing

Hi,
Am getting this following when I tried a simple UDF in mapping, please let me know your thoughts
"Exception caught by adapter framework: Dynamic Configuration Header is Missing."
UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSMessageProperty0");
conf.put(key1,a);
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSMessageProperty1");
conf.put(key2,"123");
return a;
Thanks in Advance for the help
Ashok

Hi ASHOK,
1.You will be able to see DynaicConfiguration Header automatically in Moni only if your PI is usin service Pack >= 14.in this case you jus need to check ASMA atributes in Communication channel to capture them in the UDF that you have written and need not configure the Dynamic configuration bean.To see the Service pack that you are currently using follow the navigation path.
open the PI through Log on Pad(ABAP engine) -> on the tool bar click utilities>status--> Mote details by clicking magnifying lens symbol then you will be able to see all the services packs and basis components too.
2.In case if the service pack is not SP ! >= 14 then you will have to follow the procedure of using Dyna,ic configuration Bean as experts mentioned above.
Thanks,
Ram.

Provisioning/configuration tool for multiple ATAs

Would anyone know of a provisioning/configuration tool that can be used for, hundreds possibly thousands of ATAs?

The Internetwork Performance Monitor application within CiscoWorks LAN Management Solution can do this. You can download a 90-day eval copy of LMS from http://www.cisco.com/go/nmsevals .

Weblogic Portal Samples-Dynamic Visitor tools sample

Hi,
For configuring the DVT samples at weblogic portal it is mentioned that 'The DVT Sample is not supported for a production environment'. We are not clear with this point.
Will it work only for testing environment?
Is it require to take any licence for this at production environment?
We have used the DVT for Streaming Desktop and it works only when we enable the Dynamic Visitor tools sample in bea workshop while Adding the DVT Facet.
Please clarify the same.
Regards
Himanshu

Hi Himanshu
It should work for Production Env also and as far as I know you DO NOT need any extra or separate license just to support this DVT samples. As the word itself mentions "DVT Samples", since its a kind of sample utility, BEA/Oracle officially do not support it. It can be used freely either in Dev/Test or Prod Env. Just incase if you run into any major issues, which really breaks DVT and if it do not work, then Support may say it is not supported. But still I guess they will not leave it in the air. So best thing is, do full regression testing in Dev/Test Env and then move to the Production Env. It should work for any Env as far as you install the Samples while installing WLP 10.x and Enable this facet when you create the Portal Domain.
Thanks
Ravi Jegga

Help with Cisco Output Interpreter tool!!

Hi All,
I am experiencing a problem with Cisco Output Interpreter tool.
While the tool is working fine and displaying the "CONFIGURATION COMMAND REFERENCE NOTIFICATIONS (if any)" very effectively but I am unable to use the hyperlink to get an understanding about a particular command.
When I click on a particular command(hyperlink) it pops up another window and the below error is displayed.
Not Found
The requested URL /cgi-bin/Support/Cmdlookup/ios-command-lookup.pl was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Anyone else had/have this particular error. Could you please help me with this.
Apologies if this topic does not belong to this group.
Thanks in advance
Sam

Noone to help me on this?

ColdFusion 9 Web Server Configuration Tool problem

I am using:
ColdFusion 9.01
Oracle iPlanet Web Server 7.0.13
Windows 2008 R2 Standard
When I try to use the Web Server Configuration Tool, I get the following message:   warning "connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll". Could it be an incompatability with the versions of software that I am using? Has anyone successfully configured ColdFusion 9.01 with Oracle iPlanet Web Server 7.0.13?
I can't get past this message (see below).
The wsconfig.log file has the following:
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\magnus.conf
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\obj.conf
02/14 00:39:57 error connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
java.io.FileNotFoundException: connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
    at jrunx.connectorinstaller.JarUtils.extractToFile(JarUtils.java:72)
    at jrunx.connectorinstaller.CIUtil.extractConnector(CIUtil.java:274)
    at jrunx.connectorinstaller.iPlanetInstaller.installConnector(iPlanetInstaller.java:136)
    at jrunx.connectorinstaller.ConnectorInstaller.installConnector(ConnectorInstaller.java:341)
    at jrunx.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstaller.java:275)
    at jrunx.connectorinstaller.ConnectorInstaller.main(ConnectorInstaller.java:765)

I'm using Solaris 10 SPARC, iPlanet 7.0.15, and I'm not going to use Apache!
Note: I made a slight modification to the LD_LIBRARY_PATH_64 reference in the startup script for iPlanet.
You have to do this to make the virtual server use the 64-bit libraries.
vi /sun/webserver7/https-<config_name>/bin/startserv
look for this line:
    LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}"; export LD_LIBRARY_PATH_64
and change it to this line:
    LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}:/us r/sfw/lib/sparcv9"; export LD_LIBRARY_PATH_64
I'm moving from CF8 ENT to CF9 ENT.
Here's the problem: iPlanet virtual server is configured for 64-bit operation; the connector in CF9 is 32-bit.
Question: What Program is Making this file ---> libjrun_nsapi.so ??
I'm assuming CF is creating it, so try to follow my logic here.....
CF9 doesn't want to produce libjrun_nsapi.so in 64-bit mode.
The file is located here:
/opt/coldfusion9/runtime/lib/wsconfig/1/libjrun_nsapi.so
Instead it spits out a 32-bit file....
# file libjrun_nsapi.so
libjrun_nsapi.so:       ELF 32-bit MSB dynamic lib SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped, no debugging information avail
It's supposed to look something like this:
# file libjrun_nsapi.so
libjrun_nsapi.so:       ELF 64-bit MSB dynamic lib SPARCV9 Version 1, dynamically linked, not stripped
I found out that when I use CF8, the installer asks for 64-bit configuration during install,
AND the initial startup makes the 64-bit connector.
In CF9...no such menu item; it doesn't mention 32/64 bit anything.
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
This creates the 32-bit file...
cf_root/runtime/bin/wsconfig -server coldfusion -ws sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
When I add -ws64 it breaks the script....
cf_root/runtime/bin/wsconfig -server coldfusion -ws64 sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
FYI: I grabbed the libjrun_nsapi.so file from my CF8 ENT install, and used it in my CF9 ENT install.
No errors from the web server, but it's running dirt-slow now.
Could be the file because the libjrun_nsapi.so was created to connect with CF8, not CF9 !?
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?

Getting an error in Dynamic Configuration

Hi Guys,
I need to dynamically post the file into different directories based on the file in the source payload.
In Receiver File Communication Channel
Target Directory : *
Filename : *
Checked the ASMA Attributes for filename and directory
Iam refering this weblog
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
In the mapping
<filename> ---> UDF --> topnode of target message.
My UDF is as below
public String Directory(String a,Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "Directory");
String FileName = conf.get(key);
FileName = a;
conf.put(key, FileName);
String Directory = conf.get(key1);
Directory = "/SAPInterface/XI/PPD/DHX/out";
conf.put(key1, Directory);
return " ";
But in runtime(moni) iam getting error as
com.sap.aii.af.ra.ms.api.MessagingException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
Please suggest me how to correct this.
Thanks
Srinivas

Hi Srinivas,
You said you are having dynamic directories to post the file. But I see you hardcorded or put constant for directory which is /SAPInterface/XI/PPD/DHX/out. I think you need to put //SAPInterface/XI/PPD/DHX/out.
Try this in udf:
public String Directory(String a,Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "Directory");
String FileName = conf.get(key);
FileName = a;
conf.put(key, FileName);
Directory = "//SAPInterface/XI/PPD/DHX/out";
conf.put(key1, Directory);
return " ";
Put FileName and Directory in file name and directory paramters in receiver communication cahnnel and cehck.
Regards,
--Satish

Two FileName in Dynamic Configuration

Hi All,
I have a very rare problem. In an interface which uses BPM, where file is the sender and Proxy is the target,
there is an ABAP Class in the mapping which uses Dyanmic Configuration to retrieve the FileName and create a Proxy structure and posts it to the ECC. In this scenario, Multiple files are picked from different folder using advanced Selection and sent to BPM which uses the ABAP Class.
When i run the interface with 5 different files placed at source, In SXMB_MONI, I can see that after 3 files are processed successfully with a single filename in the Dynamic Configuration, the 4th or the 5th one wil have 2 filenames in the dynamic configuration out of which the first filename will be the copy of the earlier processed filename and the second one wil be the actual required filename. The above behaviour keeps on chainging.
How can this be possible as the Context Object 'FileName' can have only single filename through out the interface instance, as there is no setting of the filename done in dynamic configuration.
Please reply if anyone has a solution to the above problem.
Thanks.

Hi Jaideep..
Thanks for the reply.
Yes.. its a serial processing. Let me explain a bit more.
as i said above, after the 3rd BPM instance (Just as an example.. keeps on chainging), the 4th instance has a unique filename compared to before 3. but after processing, the Dynamic Configuration in SXMB_MONI will have 2 fileNames. which will have a copy of any one of the earlier filenames along with actual filename.

Acces dynamic configuration variable (e.g. filename) in ABAP mapping class

Hi experts
I am searching for a possibility to acces a dynamic configuration variable (DCV) in an ABAP mapping class. Since I could not find a solution in SDN and other sources, I hope somebody in this forum can help me.
What I already found is the following code which can be used to set a DCV, but what I would be interested in is how to read a DCV.
Any help is appreciated.
Markus
METHOD if_mapping~execute.
DATA l_record type mpp_dynamic.
* copy payload
result = source.
* add an adapter specific attribute
l_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_record-name = 'FileName'.
l_record-value = 'test.xml'.
dynamic_configuration->add_record( l_record ).
ENDMETHOD.

Hi Markus,
you can find everything in my blogs
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Regards,
michal

Dynamic configuration required in sender file - Adapter Module

Hi Everybody,
I am developing an Adapter Module in the file adapter (sender) using Adapter Specific Message Attributes.
I am using Dynamic configuration inside the Module Process method in the adapter module.
We are getting an error saying Dynamic Configuration cannot be resolved.
Can anybody tell me the package to be used.
Thanks,
Zabiulla

You can access the dynamic configuration in adapter module like this:
Message msg = (Message) inputModuleData.getPrincipalData();
String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File", "FileName");
You do not need any addition library besides the adapter module API.
Hope that helps
Stefan

Cisco dynamic configuration tool

Similar Messages

Maybe you are looking for