Cisco Fabric Manager database stops and refuses to start again

The database process - FMPersist - of Cisco Fabric Manager (3.02a) fails then I can't get it started again.
We're running on a Linux server and I'm attaching the FMPersist.log.

Part of our problem has been that the database is not robust enough to handle a large fabric like we have. We upgraded to version 3.12a and split the load across two servers (and database) - test on one and production on another - so the database doesn't shut down any more, but the continuing problem has been that it will stop refreshing data. We bounce the processes once a week to update the fabric information. We are not collecting any performance data.

Similar Messages

  • TS1424 Does anyone know about a problem 12001 downloading a movie?  The download was stopped and will not start again.

    This occurred whilst downloading.  The download stopped and now I can't start it again.  Even if I try to purchase it again I can't, as it says 'downloaded' instead of the price tag.  I'd love to know the answer as we are in the middle of the third season of 'Game of Thrones'! Thanks.

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • Difference between Cisco DCNM and CISCO Fabric Manager

    Hello Everyone,
    I am new to Cisco SAN and just would like to know the differences between cisco DCNM and Cisco Fabric manager and which one is latest as of now.
    regards
    VINAY

    Hi Viany,
    Fabric Manager was renamed DCNM starting at 5.2.
    Fabric Manager only monitors SAN Fabrics, while DCNM 5.2 and above can monitor both SAN Fabrics and Ethernet LANs.
    Regards,
    David

  • Cisco Fabric Manager silent installation

                       Hello,
    I'm trying to deploy the Cisco Fabric Manager to a bunch of users and I would like to know if there is a way to automate the installation?
    Defaults are fine (also default passwords for the postgreSQL database)
    Has anyone done this or is it even possible.
    Thanks in Advance
    Edit: Verison of Fabric is 4.2.7a

    Hello,
    Release notes. Refer to Table 4 -
    http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_507.html#wp727733
    Windows Server 2008 64 bit
    Download link (once you are logged into Cisco.com with your cco userid) -
    http://software.cisco.com/download/release.html?mdfid=282731430&flowid=18002&softwareid=282762464&release=4.2%289%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Path -
    Downloads Home
    Products
    Storage Networking
    Cisco MDS 9000 Multilayer Directors and Fabric Switches
    Cisco Fabric Manager
    Thanks,
    Arun

  • Cisco Fabric Manager 5.0.7

    Dear Team!
    I have software Cisco Fabric Manager 4.2a (in SAN management server based on Windows Server 2003) Standalone version, which managed our existing fabrics (we have 2) now. In case of OS "Windows 2003 server" going to End of Life/Support, we started prepare new SAN management server based on Windows Server 2008. On this new server I installed new version of software Cisco Fabric Manager 5.0.7 Standalone.
    Question: Is it possible to manage by old Cisco Fabric Manager 4.2 our fabrics after discovere our (existing) fabric, from new SAN management server with C.F.M 5.0.7? Or after discovere management function of fabrics will take new server? Can I manage one fabric from two different servers with Cisco Fabric Manager Standalone software (I mean we have production SAN management server with C.F.M. and SAN management server with C.F.M. for DR site)?

    Hello,
    Thanks for your reply!
    I need two servers with FM as temporary, for implementation and test period only. After that, we will decommission old server and use only one. I asked because I never do discovery existing fabrics in FM, and not sure that if after discovery our fabrics from new server I can manage them from old server. In this case I raised this question.
    As I understood that I can manage our fabrics from two different servers (with different version of FM), but not at one time. Please can you confirm.
    Thanks

  • TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
    Have you tried quitting Pages completely and the restart the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • My Apple Mobile decive doesn't recognise my iPhone and refuses to start.

    My Apple Mobile device doesn't recognise my iPhone and refuses to start, I've tried all the trouble shooting options on here and none of them have worked, culd someone help me out please?

    Make sure you have the Latest version of iTunes installed on your computer...
    http://www.apple.com/support/itunes/install/
    Are you running as an administator...
    Have you ever used this phone with this computer before...

  • Download stopped and can't download again

    Download stopped and can't download again at 97%. Using Bitcomet HTTP download..
    Go to site and wanna download again, after fill the order number and password the page say
    "Sorry,
    You tried to download too many times."

    From your duplicate thread it appears you are trying to download Photoshop CS6.  Please try the steps listed at http://forums.adobe.com/thread/981369 to initate a direct download.

  • HT1379 I can't turn on my Mac Book Pro. If I press the power button will beep 3 times (won't turn on) stop and beep 3 times again. What can I do?

    I can't turn on my Mac Book Pro. If I press the power button will beep 3 times (won't turn on) stop and beep 3 times again. What can I do?

    Three beeps at startup almost always indicate bad RAM. You probably need to get your RAM replaced. Bring it in to Apple for a definitive diagnosis if you are unable to run the Apple HardwareTest
    Using Apple Hardware Test - Support - Apple

  • I cant download apps on my iphone 5, it takes me to set up 3 security questions where i am always timed out and made to start again??

    i cant download apps on my iphone 5, it takes me to set up 3 security questions where i am always timed out and made to start again??

    Call apple.This happened to me in August when i bought mine. They will reset the 3 passwords.

  • HT1414 i dropped my iphone 4 and it doesnt start again

    i accidentaly dropped my iphone4 and it doesnt start again and no signal..how to fix it?

    Some folks have reported success dropping it onto a carpet from a low height, but you do this at your own risk. You can also try a reset: hold down the home button along with the sleep/wake button until you see the Apple, then let go.

  • I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

    Hello!
    I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
    But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
    The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
    Please Help me!
    MacBook Air (11-inch Mid 2009)

    Welcome to Apple Discussions
    You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
    Also remove any attached peripherals.
    Reboot in Repair mode (command-R at start)  and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
    You must have more than enough (not just enough) empty (free) disk space for the update.

  • If a call comes in while adding a contact or editing a contact all info is lost and have to start again.

    If a call comes in while adding a contact or editing a contact all info is lost and have to start again.

    If it's happening on multiple devices the only thing I could suggest is a downgrade to 10.2.1 if the issue becomes too bothersome. Make sure to do a backup before downgrading as you will lose all information.
    1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
    2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

  • My iPhone 5 started acting wierd earlier and the touched lived its own life. Suddenly it began the iPhone started to turn itself on and off several times, before it got a blue screen and wouldn't start again. What do I do?

    My iPhone 5 started acting wierd earlier and the touched lived its own life. Suddenly it began the iPhone started to turn itself on and off several times, before it got a blue screen and wouldn't start again. What do I do?

    press and hold the home button and the lock button together for atleast 10 secs or till the time u see the apple logo,once you see the apple logo,let go off the keys... good luck

  • Cisco Call Manager 5.1 and Cisco VoIP Gateways

    Hi,
    I have Cisco Call Manager 5.1 with Cisco 2800 series routers as a ISDN gateways and Cisco VG224/ATA 186 as POTS gateways. While Cisco Call Manager collects call statistics from 7900 series SCCP handsets managed by the Call Manager (number of VoIP packets, dropped frames etc.), it shows only one side of the call as it does not collect statistics from the Cisco routers (configured as H.323 gateways), the Cisco VG224 (with ports configured as H.323 gateways and as a SCCP devices) and Cisco ATA 186 (configured for SCCP).
    Is the collection of these statistics possible? What needs to be done?
    Thanks,
    Paul

    Update: Logging of QoS/Call Management Records (CMR) to Call Manager CDR database is not possible with H.323 gateways; only MGCP gateways:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a008020650a.shtml#qa4
    Anyone know how to get the Cisco router gateway to log these statistics anyway using standard router logging mechanisms (e.g. syslog)?
    Anyone know about calls to SCCP ports on Cisco VG224 or ATA 186?
    Thanks,
    Paul

Maybe you are looking for