Cisco Fax 9.4 and CCM7

Hello, I trying to intergate Cisco Fax 9.4 with CCM7,
Schema is    E1--> GW2921 -->H323 --> CCM7 --> H323 --> FAX.
                     FAX --> H323 --> CCM
GW config:
HQ#sh run | s dial-peer
dial-peer voice 1 pots
description ---Incoming_Calls_From_PSTN---
incoming called-number .T
direct-inward-dial
port 0/0/0:15
forward-digits all
dial-peer voice 3 voip
description ---To_CCM---
destination-pattern ^222222$
session target ipv4:10.52.205.2
dtmf-relay h245-alphanumeric
codec g711ulaw
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
dial-peer voice 2 pots
description ---v_Gorod---
destination-pattern 9......
port 0/0/0:15
forward-digits 6
dial-peer voice 6 pots
destination-pattern 98..........
port 0/0/0:15
forward-digits 11
Cisco Fax Server - is H323 Gateway on CCM 7
Fax Server is pointing to CCM this way:
Brooktrout Conf Tools -> H.323 -> Primary Gateway (CCM IP)
I have 1 dialing rule:
     Pattern: +
          Number Adjustments
               Prepend this: @CCM IP
And I have two Users created in Right Fax Enterprise Fax Manager:
First - route code 7000
Second - route code 7001
I trying to sent fax from FaxUtil of first user to FaxUtil of thw second user.
First user (route code 7000) push New Document button in the FaxUtil and fill rows:
Name: "First"
Fax Number: 7001
push "Send" button
and status of fax message is stucked in "Sheduled to be Sent" status.
I see that user 7001 have 1 Faxes, but that is no actions more.
Please, if some one know what is a problem, help,
Thanks.

You, also, have the dreaded and EVEEL MacKeeper installed. Git rid of eeeet!!!
Here is the way to properly uninstall MacKeeper.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Here is some more pertinent info about MacKeeper and its ilk.
Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary OR needed. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
These types of  system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and important data is too great a risk!

Similar Messages

  • Cisco Fax Server (Captaris) and Cisco Fax Relay

    Hello all!
    i know that Captaris Cisco Fax Server works well with T.38 Fax Relay...and what about Cisco Fax Relay? Is it compatible?
    thanks,
    met

    Hi!
    Please check the following link, specially Pg. 9 "ISDN/MGCP Cisco Fax Relay Mode" . You'll see the deployment models of the Cisco Fax server: IP T.38 Fax Relay, ISDN E1/T1 Direct Connection and ISDN/MGCP Cisco Fax Relay Mode:
    *** Installation Guide Supplement for Cisco Fax Server ***
    www.cisco.com/en/US/docs/voice_ip_comm/fax_server/90/faxigsup.pdf
    Hope this helps!
    Regards,
    Teresa.
    If it helps, please rate! :)

  • MGCP Gateways and Cisco Fax

    We are considering adding a fax solution to our IPT infrastructure using Cisco Fax (Captaris RightFax). Ideally we would like the same voice gateways to terminate the fax calls (internal voice calls use QSIG and external calls use Q.931). Can this be achieved with MGCP-controlled Voice gateways? Can T.38 fax be configured with an MGCP gateway. I have seen examples where H.323 dial-peers are required to talk SIP to the Fax Server.
    If not, is an alternative to use a back-to-back PRI connection between a voice gateway port and the Fax Server ISDN card, with appropriate route patterns in CallManager to route the fax calls to Fax Server, using Cisco Fax Relay?

    with cm 4.2.3 there is mgcp t.38 support implemented.
    see release notes cm 4.2.3
    http://www.cisco.com/application/pdf/en/us/guest/products/ps6729/c1178/ccmigration_09186a0080724724.pdf
    regards
    mehmet

  • Cisco Fax Server

    I have a new install running Cisco Fax Server (Captaris 9.0) and I'm having the issue enabling the OCR converter. Fax Server is up, receiving faxes and sending to exchange if OCR is disabled on the user's mailbox. If I enable the OCR option on the user's Default Receive Settings then the faxes just sit in the OCR queue and never get serviced. Here are the steps I've done.
    * Enabled the OCR service on the Workserver
    * Validated my licensed features have the OCR converter option (assuming it does cause it's listed in licensed features)
    * Given my user OCR permissions
    * Configured automatic OCR conversion on the user's fax/mailbox.
    These are all the steps referenced in the docs.
    http://www.cisco.com/application/pdf/en/us/guest/products/ps6178/c1945/ccmigration_09186a008040f768.pdf
    Anyone know if the Event Viewer is the only logging for this application. Turned up both system and database logging to verbose and still no luck.
    Thanks
    Fred

    The problem was fixed by deleting the Workserver and re-adding it. All the configuration was correct but the work server was just not functioning correctly.
    Debugging can be turned on by issuing this command when the workserver service is stopped.
    worksrv d -1 -sworksvr1 > debug.txt
    (worksvr# is the number of your workserver)
    Thanks
    Fred

  • Configuring utilies on the Cisco Fax Server 9.4

    Hi,
    I'm trying to configure the cisco fax server 9.4, but I can't find any documentacion that explain how to configure, exntesions, dialing rules etc. Somebody knows where can I find the documentation?
    Regards,
    Vinicius S Ramos

    Hi Marco,
    Now I can navigate at the CFS.
    Sorry my question got a little confusing. Now they are working.
    Yesdarday I did the re-installation of the Windows 2003 Server and CFS. 
    Today I went to activite the license of Broothrout (SR140-4-R3), at the end of the activation show me the message that the license is invalid.
    Do you know if the problem with the license , because a uninstall the CFS and after I install again, once that I already actived the license ?
    More one question. Do you have some documentation that explain how to configure CFS. How to configure user's and extension inside of CFS ?
    I open the TAC and I sent the e-mail for license to try solve that problem with the invalid license.
    Regards,
    Vinicius

  • Integration of Cisco Fax Server with CUCM

    Need some help with regards to the setup of Cisco Fax Server. I have Cisco Fax Server 9.4 Enterprise Suite which will be installed on Cisco 7816 server. Now my concern is with the integration of Fax server with CUCM. I have CUCM Ver 7. Could anyone tell me what configuration is required on CUCM and I believe we need to have dial-peer on the Voice gateway as well pointing to the Fax server. If anyone has deployed then please let me know the configuration on CUCM & the voice gateway.

    Hi..
    Thank u so much guys. I was mostly looking out for the integration of Fax server with CUCM, so i think this document should help. I has this document with me but had few doubts. Hopefully it should be cleared now. I will be doing the implementation later next week so i will keep you updated. Anyway thank u so much once again.
    Regards,
    Joy

  • Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

    Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
    Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
    Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
    Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
    Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
    Jason is a subject matter expert with the following products and features:
    Cisco Prime LAN management solution
    Cisco Prime infrastructure
    CiscoSecure ACS
    Cisco Prime Network Registrar
    Cisco Process Orchestrator
    Cisco Prime Service Catalog
    Cisco IP SLA
    Embedded Event Manager
    SNMPv3
    onePK and OpenFlow
    Cisco UCS
    Device instrumentation
    VMware ESX, ESXi, and vCenter
    ITIL
    Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
    Remember to use the rating system to let Jason know if you have received an adequate response.
    Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

    Hello Jason,
    Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
    That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
    Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
    ---- Quote from the Cisco Prime Service Catalog Data Sheet
     Today’s end users want self-service and easy access to IT tools and services.
    Simultaneously, organizations are seeking ways to extend their cloud management
    platforms beyond self-service delivery of virtual machines and infrastructure resources
    while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
    Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
    which all types of IT services are ordered and fulfilled, not just infrastructure requests
    ---- un quote ---
    I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
    As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
    Let’s say, a user wants to deploy a new email services, or in your example,  extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
    Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
    Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
    Out if interest; Is this product also known as Mozart? (project code within Cisco?)
    I hope query is ok.
    Best wishes
    Markus

  • How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

    Hello, 
    I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.  
    I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
    to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
    there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
    How can implement this for this sending outgoing faxes as well?
    I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server. 
    Any help is appreciated. Thanks!

    Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
    http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
    The article is so easy to understand with detail procedure and guideliness
    Exchange Queries

  • I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

    I want to integrate SMS gateway to Cisco ISE 1.2 and my question is 
    SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor 

    I'm not sure I understand the question.  Do you want to log in to the Sponsor Portal using AD credentials?
    Create an Identity Source Sequence using AD as an Authentication Source.  Go to Administration > Identity Management > Identity Source Sequences.  Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
    Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings.  Double-click Sponsor from the Left Menu and click Authentication Source.  Choose the Identity Source Sequence.  Click Save.
    I hope this helps.
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Set default fax to black and white

    I have been sending faxes by sending doc files to print and selecting the Officejet fax as my printer option.
    Annoyingly, it keeps reverting to "send color" . I would like to set "sending black and white faxes" as the default. 
    How can I set the default to Black and white?
    I cannot find, in the manual, any reference to setting the default.
    Thanks for any insight--even a page number in the manual would be helpful.

    Hi @deepthinker,
    Welcome to the HP Forums!
    I noticed that you are trying to set default fax to black and white instead of color with your HP Officejet 5610 on Windows 8.1 (64-bit). I am happy to look into this for you!
    I would recommend to open your HP Solution Center (should be a printer icon on your desktop.) Then click on Settings, then click on Printer Settings,  click on the Features tab at the top of the screen, look for the Color Options section near bottom left, and click on Print in grayscale, click the down arrow on High Quality, and select Black Ink Only.
    Here is an image of what I am seeing.
    If that doesn't work try the following:
    Open the HP Solution Center, select Send A Fax, and then look for Black and White only.
    Here is another image to illustrate.
    Hope this information helps, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Ask the Expert: Cisco Nexus 2000, 5000, and 6000 Series Switches

    with Cisco Expert Vinayak Sudame
    Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions how to configure and troubleshoot the Cisco Nexus 2000, 5000 and 6000 Series Switches with Cisco subject matter expert Vinayak Sudame. You can ask any question on configuration, troubleshooting, features, design and Fiber Channel over Ethernet (FCoE).
    Vinayak Sudame is a Technical Lead in Data Center Switching Support Team within Cisco's Technical Services in RTP, North Carolina. His current responsibilities include but are not limited to Troubleshooting Technical support problems and Escalations in the areas of Nexus 5000, Nexus 2000, FCoE. Vinayak is also involved in developing technical content for Cisco Internal as well as external. eg, Nexus 5000 Troubleshooting Guide (CCO), Nexus 5000 portal (partners), etc. This involves cross team collaboration and working with multiple different teams within Cisco. Vinayak has also contributed to training account teams and partners in CAE (Customer Assurance Engineering) bootcamp dealing with Nexus 5000 technologies. In the past, Vinayak's responsibilities included supporting MDS platform (Fiber Channel Technologies) and work with EMC support on Escalated MDS cases. Vinayak was the Subject Matter Expert for Santap Technologies before moving to Nexus 5000 support. Vinayak holds a Masters in Electrical Engineering with Specialization in Networking from Wichita State University, Kansas. He also holds Cisco Certification CCIE (#20672) in Routing and Switching.
    Remember to use the rating system to let Vinayak know if you have received an adequate response.
    Vinayak might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the  Data Center sub-community, Other Data Center Topics discussion forum shortly after the event.
    This event last through Friday July 12, 2013. Visit the community often to view responses to youe questions of other community members.

    Hi Vinayak,
    Output of "show cfs internal ethernet-peer database"
    Switch 1
    ETH Fabric
    Switch WWN              logical-if_index
    20:00:54:7f:ee:b7:c2:80 [Local]
    20:00:54:7f:ee:b6:3f:80 16000005
    Total number of entries = 2
    Switch 2
    ETH Fabric
    Switch WWN              logical-if_index
    20:00:54:7f:ee:b6:3f:80 [Local]
    20:00:54:7f:ee:b7:c2:80 16000005
    Total number of entries = 2
    Output of "show system internal csm info trace"
    Switch 1 in which "show cfs peers" show proper output
    Mon Jul  1 05:46:19.145339  (CSM_T) csm_sp_buf_cmd_tbl_expand_range(8604): No range command in buf_cmd_tbl.
    Mon Jul  1 05:46:19.145280  (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
    Mon Jul  1 05:46:19.145188  (CSM_T) csm_sp_handle_local_verify_commit(4291):
    Mon Jul  1 05:46:19.145131  csm_continue_verify_ac[597]: peer is not reachable over CFS so continuing with local verify/commit
    Mon Jul  1 05:46:19.145071  csm_tl_lock(766): Peer information not found for IP address: '172.16.1.54'
    Mon Jul  1 05:46:19.145011  csm_tl_lock(737):
    Mon Jul  1 05:46:19.144955  (CSM_EV) csm_sp_build_tl_lock_req_n_send(941): sending lock-request for CONF_SYNC_TL_SESSION_TYPE_VERIFY subtype 0 to Peer ip = (172.16.1.54)
    Mon Jul  1 05:46:19.143819  (CSM_T) csm_copy_image_and_internal_versions(788): sw_img_ver: 5.2(1)N1(2a), int_rev: 1
    Mon Jul  1 05:46:19.143761  (CSM_T) csm_sp_get_peer_sync_rev(329): found the peer with address=172.16.1.54 and sync_rev=78
    Mon Jul  1 05:46:19.143699  (CSM_T) csm_sp_get_peer_sync_rev(315):
    Mon Jul  1 05:46:19.143641  (CSM_EV) csm_sp_build_tl_lock_req_n_send(838): Entered fn
    Mon Jul  1 05:46:19.143582  (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
    Switch 2 in which "show cfs peers" does not show proper output
    Mon Jul  1 06:13:11.885354  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 77 seq 482
    Mon Jul  1 06:13:11.884992  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 357 seq 369
    Mon Jul  1 06:13:11.884932  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 357 seq 368
    Mon Jul  1 06:13:11.884872  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 357 seq 367
    Mon Jul  1 06:13:11.884811  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 357 seq 366
    Mon Jul  1 06:13:11.884750  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 352 seq 365
    Mon Jul  1 06:13:11.884690  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 352 seq 364
    Mon Jul  1 06:13:11.884630  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 352 seq 363
    Mon Jul  1 06:13:11.884568  (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 352 seq 362
    Mon Jul  1 06:13:11.884207  (CSM_EV) csm_sp_acfg_gen_handler(3011):  Preparing config into /tmp/csm_sp_acfg_1733916569.txt
    Mon Jul  1 06:13:11.878695  csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
    Mon Jul  1 06:13:11.878638  (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
    Mon Jul  1 06:12:29.527840  (CSM_T) csm_pss_del_seq_tbl(1989): Freeing seq tbl data
    Mon Jul  1 06:12:29.513255  (CSM_T) csm_sp_acfg_gen_handler(3106): Done acfg file write
    Mon Jul  1 06:12:29.513179  (CSM_EV) csm_sp_acfg_gen_handler(3011):  Preparing config into /tmp/csm_sp_acfg_1733911262.txt
    Mon Jul  1 06:12:29.508859  csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
    Mon Jul  1 06:12:29.508803  (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
    Mon Jul  1 05:53:17.651236  Collecting peer info
    Mon Jul  1 05:53:17.651181  Failed to get the argumentvalue for 'ip-address'
    Mon Jul  1 05:40:59.262736  DB Unlocked Successfully
    Mon Jul  1 05:40:59.262654  Unlocking DB, Lock Owner Details:Client:1 ID:1
    Mon Jul  1 05:40:59.262570  (CSM_T) csm_sp_del_buf_cmd(1713): Deleting comand with Id = 1
    Mon Jul  1 05:40:59.262513  DB Lock Successful by Client:1 ID:1
    Mon Jul  1 05:40:59.262435  Recieved lock request by Client:1 ID:1
    Mon Jul  1 05:40:41.741224  ssnmgr_ssn_handle_create_get: Session FSM already present, ID:1
    Mon Jul  1 05:40:41.741167  ssnmgr_handle_mgmt_request: Create/Get request received for session[process_n5kprof]
    show cfs lock gives no output.
    Just to further clarify, we have 4 5548UP switches in the same management vlan. 2 switches are in one location lets say location A and they are CFS peers and are working fine.
    These two switches which are having problem are in location B. All the switches are in the same vlan. Essentially the all CFS multicast messages will be seen by all 5548 switches as they are in the same vlan. I am assuming that this might not create any problems as we specify the peers in the respective configurations. Or do we have to change the CFSoIPv4 multicast addresses in location B or may be configure a different region.
    Regards.

  • Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

    Hi,
         I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
    FQDN: active.test.com
    Domain Name : test.com
    User : ccasso
    2011-02-05 12:00:30.225 +0700 WARN  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server was not running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server starting server ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server is now running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - SPN : [ccasso/[email protected]]
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - done building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - KDC(s) :[10.0.240.100]
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - creating login context ...
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - created login context ...javax.security.auth.login.LoginCon                                                                           
    text@5ad7b2
    2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer                                                                                           
    - Unable to start server ... KDC has no support for encryption type (14)
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Notifying GSSServer status Stopped
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - server is exiting .

    Hi,
    This error means that your DC does not support the encryption method the ACS wants to use.
    Usually this happens when you run 2008 Server with 2003 functionality...
    You will need to run ktpass.exe according to the DC you are running:
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
    For Windows 2008 Server at 2003 Server functional level:
    ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
    PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring

    Hi all,
    I am implementing Cisco Prime Collaboration to monitor the quality of the VoIP call.
    I am following all the steps that I have to do to accomplish this task at this link:
    http://docwiki.cisco.com/wiki/Setting_up_Devices_for_Prime_Collaboration_Assurance#Configuring_Unified_Contact_Center_Enterprise_Devices
    And now I am arrived on this step:
    Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring
    Not all the Cisco devices that I have on the network are "Mediatrace, IP SLA and Performance Monitoring" capabilities. The core switch is one of them.
    What will happen if some devices are configured with these capabilities and some are not?
    Are the data provided from Cisco Collaboration still reliable?
    Thanks in advance.
    Luigi

    I can't see a reason why the 2 features won't work together. The 2 features will work just fine with each other.
    Unfortunately there is no sample config with both feature in the same document, but it will work just fine.

  • Dear All, I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me. Thanks Vijay

    Dear All,
                         I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
    Thanks
    Vijay

    Hi Vijay,
    If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you 
    HTH,

  • Cisco Fax Server 9.4 - Available Space for Fax DB per SQL

    We have two Cisco Fax Servers 9.4, using an SQL cluster. On the RightFax Enterprise Fax Manager, we have "Available Space for Fax DB per SQL" with only 4%, even though we have 200GB free on the SQL cluster.
    Any ideas?
    I think this is keeping all outbound faxes on the "Waiting for Phone Expansion" state...

    Hi Sir,    
         My fax server has the SAME status. Is it normal? What is the condition of your FAX server? Are the FAX servers running smooth even it indicate the space for DB per SQL have 4%?
    Your input will be much apprecivated!!
    Michael.

Maybe you are looking for

  • Adding a check box in scripts

    Hello experts,          i got a requirement like to add a check box to the form. is it possible in scripts. if yes can u tell me how can we add a check box in the form(scripts). thanks is advance

  • Upgrading from CS3 to CS5 issues

    I work at a medium size College on a pretty small team, 1 editor/writer, 1 communications coordinator, and 1 designer (me). I've been using InDesign (ID) for 5 years now and we added on the InCopy (IC) workflow a few years ago with CS3 (both of us th

  • BPC cannot connect to ABAP server

    Hello Experts, I'm facing the following issue when installing SAP BPC NW 7.5 SP04 When the installation is done (succesfully) I try to login to the server manager and get following error message: "Cannot connect to ABAP server; Check your ABAP server

  • How to distribute Modelview to external system such as Webmethods

    Hi All, I have a scenario like this  I  have to send Delivery idoc to two external systems                    Triggered through SAP               output 'ZEXA'. system        -> DESADV ->     External system (A)                     Triggered through

  • How to reinstall Premiere Elements 11? [was:2014 MacBook Pro no cd drive to download programs]

    Hello techy and computer savvy people. I recently bought a new Retina MacBook Pro and it doesn't have a cd drive. I already own premier elements 11 and I want to get it on my new mac. Since premier elements 12 has come out they don't have a download