Cisco IAC 3.1 - problems running Conf Wizard

Hi all
Following the configuration guide for Cisco IAC 3.1, I have all steps required for executing the configuration wizard in place but, for some reason, it fails to discover the infrastructure items through the wizard. I could discover and register the infrastructure items through the Manage Cloud Infrastructure portlet.
During the discovery process, I should expect communications between CP and CO, right? I see no new process starting at PO during the discovery process.
Any hints on what might be happening ?
Thanks in advance

Yes. The documentation actually indicates that PowerCli is a requirement. It is installed along with all the other requirements.
I believe this conf wizard issue comes from the SE 3.0.1 release. It was know that one had to log out, close the browser and then log back in so that the next wizard step could be performed. Terrible for a UI experience but hope it will be fixed soon.
Thanks for your support.

Similar Messages

Error to run Configuration Wizard weblogic 12.1.2 # error is java virtual machine launcher error could not create the java virtual machine

hi
Error to run Configuration Wizard weblogic 12.1.2
my system is windows xp by 2 gig ram
and jvm version
C:\Program Files\Java\jdk1.7.0_25\bin>java -version
java version "1.7.0_25"
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) Client VM (build 23.25-b01, mixed mode, sharing)
how resolve this problem and how find log file weblogic to this error?

In user environments where the path to java is not already established as an system-level environment variable, the service is unable to determine where to find java and this error will occur.
This could occur, for example, in environments where there is more than one JDK installed, or where the default JDK is different from the JDK which needs to be used by WLS.
Try to set the environment variable in windows i.e JAVA_HOME=C:\Sun\Java\jdk1.7.xx.x. to point to jdk 1.7 and run the configuration wizard.
Hope it helps!!
Thanks,
Vijaya

Re run Configuration Wizards

Hello:
I've installed ESR on CE and ran the configuration wizard "Configuration of ESR in CE"
I missconfigured the sld host, appending the "http//" prefix, and now ESR attempts to connect to http:
http:
host:50000\sld
how can I re-run the configuration wizard so I correct this situation?
Thanks
Alejandro

Hello Alejandro
Unfortunately, with the SP3 release of ESR, it is not possible to run re-run the Configuration Wizard. But you don't have to do so to fix the problem - The configuration wizard only takes you through the step-by-step process.
You can change the settings manually by modifying the ESR properties. The post installation documentation is available here
[http://help.sap.com/saphelp_nwesrce/helpdata/en/46/b3a7d01b475a62e10000000a11466f/frameset.htm|http://help.sap.com/saphelp_nwesrce/helpdata/en/46/b3a7d01b475a62e10000000a11466f/frameset.htm]
Hope this is helpful.
regards
Rathish

Cisco 801 ISDN Router Problem

Hi at all,
I need your experience with this device! I will implement a remote connection to a customer.
Following constellation:
My PC --> Our ISDN NTBA --> provider --> Phone System customer --> S0 --> ISDN 801 Router --> End Device
My problem is when I call the phone number with my mobile phone the call takes place, the router brings up the channel and hold this for a few seconds.
The he kick me out than he can´t speak with my end device.
When I do this with my remote pc nothing happens only this.
He hangs up and I must restart this application to do the next attempt. How can I fix this problem?
The debug isdn q931 shows this:
00:34:24: ISDN BR0 Q931: RX <- SETUP pd = 8 callref = 0x01
Sending Complete
Bearer Capability i = 0x8890
Standard = CCITT
Transer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0083, 'xxxxxxx'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '69'
Plan:Unknown, Type:Unknown
00:34:24: %DIALER-6-BIND: Interface BR0:2 bound to profile Di1
00:34:103079215104: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:34:24: ISDN BR0 Q931: TX -> CALL_PROC pd = 8 callref = 0x81
Channel ID i = 0x8A
00:34:24: ISDN BR0 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x01
Channel ID i = 0x8A
00:34:24: ISDN BR0 Q931: TX -> ALERTING pd = 8 callref = 0x81
00:34:24: ISDN BR0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
Cause i = 0x85D1 - Invalid call reference value
00:34:24: ISDN BR0 Q931: TX -> CONNECT pd = 8 callref = 0x81
00:34:24: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to xxxxxxxx
00:34:24: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
00:34:24: %DIALER-6-UNBIND: Interface BR0:2 unbound from profile Di1
00:34:24: ISDN BR0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
Cause i = 0x85D1 - Invalid call reference value
00:34:24: ISDN BR0 Q931: L3_Go: L3_GetUser_NLCB returned NULL cid 0x0 cr 0x81 ev 0x5A ces 1 -- Message ignored
00:34:24: ISDN BR0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
Cause i = 0x85D1 - Invalid call reference value
00:34:24: ISDN BR0 Q931: L3_Go: L3_GetUser_NLCB returned NULL cid 0x0 cr 0x81 ev 0x5A ces 1 -- Message ignored
00:34:27: ISDN BR0 Q931: RX <- DISCONNECT pd = 8 callref = 0x01
Cause i = 0x8090 - Normal call clearing
Facility i = 0x91A11302029372020122300AA1053003020100820101
- ETSI Supplementary Service, Invoke, AOC-D Charging Units: 0
00:34:27: ISDN BR0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
And this is my configuration on the Cisco 801 ISDN Router:
sh run
Building configuration...
Current configuration : 1539 bytes
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname customer
boot-start-marker
boot system flash c800-y6-mw.123-3i.bin
boot-end-marker
logging buffered 4096 debugging
enable secret 5 $1$4sbt$qMDQoozleDqJstTzC2P8I1
username admin password 7 01000505571F0303
aaa new-model
aaa authentication login default local
aaa authentication ppp default local
aaa session-id common
ip subnet-zero
no ip domain lookup
isdn switch-type basic-net3
interface Ethernet0
description connection
ip address 192.168.1.254 255.255.255.0
no keepalive
interface BRI0
description connected to Dial-inPC (ISDN)
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn incoming-voice data
isdn answer1 12
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface Dialer0
description connected to Dial-inPC (ISDN)
ip unnumbered Ethernet0
encapsulation ppp
no ip split-horizon
dialer pool 1
peer default ip address pool test
no cdp enable
ppp authentication chap
ppp multilink
router rip
version 2
network 192.168.1.0
no auto-summary
ip local pool test 192.168.1.10 192.168.1.11
ip classless
no ip http server
dialer-list 1 protocol ip permit
line con 0
exec-timeout 0 0
transport preferred all
transport output all
stopbits 1
line vty 0 4
transport preferred all
transport input all
transport output all
no rcapi server
end
I hope anyone have or had this constellation too with a solution that works.
Many Thanks in advance,
Mario

Hi at all,
We found a solution for this Problem !!
We always and always got this error:
%PQUICC-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
The problem was the cable! The following pin-out is required:
                                        1 ----- 1
                                        2 ----- 2
                                        3 ----- 6
                                        4 ----- 5
                                        5 ----- 4
                                        6 ----- 3
                                        7 ----- 7
                                        8 ----- 8
We used this and the fault has disappeared!!
The only problem that still exists:
After the first connection the router must be rebooted because otherwise no more additional session is established.
Thanks for all answers.
Regards,
Mario

Cisco RV1200W strange Arp problem

Hi,
I have just bought a new Cisco Rv1200w router, which is running the very latest firmware V1.0.2.6.
My problem is that since swapping my router, my HP server can no longer see the default gateway (now the cisco), however it can see anything else on the LAN. I've done a trace with Wireshark (attached) and when I ping the default gateway from the server (10.10.52.9) I see an arp broadcast asking who is 10.10.52.254, then the router responds with its mac address but my server just completely ignores the reply and keeps asking.
I've tried upgrading the drivers on the server but its made absolutely no difference, I didn't have any problem before swapping my router.
Any ideas ?
Thanks Pat

Patrick,
That is very strange behaviour; to get a better understanding on whats going on please give the Cisco SBSC a call @1-866-606-1866 and open a support ticket. I haven't heard or seen of the issue you are currently having.
Thanks,
Jasbryan
Cisco Support Engineer
.:|:.:|:.

How to run dunning wizard using DIAPI

Dear Friends
In a requirement i have to run dunning wizard using DI API but i am unable to find any DI object.
Could you help me please !

Vinit,
This is currently not an option using the DI API.
Apologies,
Eddy

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh Painuly

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Problem running Lex in project created with Forte C++

I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
Ron

I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Yes, try in google.com
Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Trouble printing something out. Getting error message: There is a problem running Adobe Acrobat Reader. If it's running please exit and try again. 6:6

Getting message: There is a problem running adobe Acrobat Reader. If it's running, please exit and try again. 6:6

Hi garryw,
What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
Let us know how it goes.
Best,
Sara

Error while running Payment Wizard

Dear Friends,
While i m running payment wizard , I get a follong error in Recomondation Report( STEP 6 of 8).
<b>Error</b>-----
Number of document in payment is grater then then maiximum defined.
Need help urgently,
Thanks.

Dear Arpit,
What you have to do is go to
Administration>System Initialization>Document Settings>Per Document Tab>now select "Outgoing Payment" from the drop down list against to "Document" and now you have to enter the number in the box provided for "Maximum No. of Documents in Payment".
I hope this works for you.
good day

Cisco IAC 3.1 - problems running Conf Wizard

Similar Messages

Maybe you are looking for