Cisco IME Reporting Issue

Hi,
Cisco IME 7.2.7 is able to get events from IPS sensor but during report generation we get "No records found"
Reports are getting generated for last 400 hrs for BASIC TOP SIGNATURES.
We have events for last 100 hrs with HIGH severity level but for those NO report of TOP Signatures with high severity were generated for last 100 hr.
Please if there is something we are missing in configuring IME or there is some other issue with report generation do let us know ASAP.
Thanks in advance.
Regards,
Gurjit Singh
Network Engineer
Spooster IT Services

Hi all,
P.S:Please find attached captures for Events in last 100 hrs with high severity, reports for 100 hrs, Report for 400 hrs.
The events are generated with high severity but there are no corresponding reports.
What all reasons can be there?
Regards,
Gurjit Singh
Network Engineer
Spooster IT Services

Similar Messages

CCX Historical Reports issue

Hi everyone,
Hope everything is going ok. I have an issue with the Cisco Historical Report Tool with UCCX 7.0 Premium version.When I opened the tool I only see 3 reports. I only see the Application Performance Analysis, Traffic Analysis or Detailed Call by Call CCDR reports. Ive checked permissions and everything but Im not able to see the rest of them. Yesterday, I was able to see them.
If you have any ideas PLEASE let me know
Thanks for your comments.
Fred

Hi
Firstly I'm assuming you've sanity checked that the server/client PC times are correct, user is entering sensible time/dates, and sensible filters?
Does this affect all reports?
I've seen this happen when replication fails; sometimes putting in the other server IP when you run HRC may turn up the results. Maybe try that?
Also go into Appadmin/System/Datastore Control Centre and report back the status of the replication - primarily the Historical datastore.
Aaron
Please rate helpful posts...

Cannot open CISCO IME

Hi everyone
I'm having some issues trying to open the CISCO IME on my computer, I just double click on the icon but nothing happen, even it won't appear on the TASK MANAGER > PROCESSES. I was thinking that maybe the problem could it be with the JAVA version but I have the v6.17 I don't know if I need to upgrade the version but as far as i know it won't work with V7.
I post this problem here because I didn't find anything on google hope you could help me.
Regards.

CCP Express is the version to be run on the router only. For your PC, you should download and install CCP PC version (2.7 dated 15 April 2013 is the most current as of this writing) from this link:
http://software.cisco.com/download/release.html?mdfid=281795035&softwareid=282159854&release=2.8&relind=AVAILABLE&rellifecycle=&reltype=latest

Cisco Aironet 1140 Issues (Dropping clients, 5GHz issue, AP Switching)

Greetings,
We've been having issues for a while with these Aironet 1140's. We have two of them in the office and the issue is similar to the first issue displayed in this post:
https://supportforums.cisco.com/docs/DOC-26228
The only difference is that I can't do this since we don't use a controller.
We're using Mac clients on Lion/Mt. Lion. We have no issues connecting to the access points, but occassionally the user will drop off one of the AP's(Access Point 2). Recently I changed the setup from TKIP/WPA to AES-CCM/WPA to get the PHY address to 802.11N instead of 802.11G. I got the speeds working fine, but I suppose this caused an issue of people dropping off at different times. I noticed if I remove the SSID from the preferred list and reconnect it goes from WPA to WPA2. Not sure if this is relevant information, just trying to list what I can to resolve this issue. I haven't had any reported issues with the other Access Point(Access Point 1).
Another issue we have is getting the radio to work on 5GHz for Access Point 1. It seems when a user is connected to the 5GHz signal, it will not load any web pages. Can ping out just fine, and ping internally as well. I've checked to see if the client is getting an IP address, and it is. It also has DNS set to 8.8.8.8 and another DNS IP we use. The other Access Point seems to work just fine with 5GHz enabled. Both work with 2.4GHz with no issues at all.
Lastly, clients are not switching Access Points to the strongest signal. I've tried this test with 5+ machines running different OS's from Snow Leopard to Mt. Lion. The client will not switch over passively, the Laptop must be closed and reopened to re-establish the connection to grab the closest signal. This isn't a huge issue, but it's something I'd like to get fixed. This could have been an ongoing issue before I switched the AP's to AES-CCM, but I've only noticed it after the fact.
If there's any additional information needed that could help resolve these issues, let me know.
Thanks!

The wireless clients/devices decides which WAPs to join. It's not a "Cisco thing". It's the standard.
That's what I figured, it's just an issue we have been having lately and trying to rule out the possibility it might be an Access Point issue.
Did you enable WPA and WPA2??? Apple does not like to "choose". You have to either use WPA OR WPA2.
Actually, yes I should have included my steps of trying to resolve the issue. For some reason, the SSID would not appear in the listing of SSID's so I removed the preferred connection, which was WPA, and manually added it to be WPA2 Personal on the client. Still saw some issues with a few users, others seem to have rectified or they're not telling me.
I checked the event logs on the device and saw this:
Packet to client e0f8.4735.c16e reached max retries, removing the client
After some research, it was recommended to raise the packet retry value to 128. I haven't received any complaints from the 3 people that usually complain about dropped wifi yet, but it's still too soon to say.
The only thing I can think of is the signal strength. Disable the 2.4 Ghz and see what signal strength you are getting with the 5.0 Ghz.
It should not be signal strength since I am about 10 feet away on my test machine which has the issue as well as any other clients in any distance long enough to grab the connection. I will try turning off 2.4 when there's nobody in the office tomorrow in the morning to see if that actually works. I would like to have it dual band though since we're not all at 5GHz here. With this issue, I was actually fearing that there just may be an issue with the 5GHz radio hardware. We also have an extra 1140 laying around I used for testing; the 5GHz radio worked with identical settings to the one not working.
Thanks for the reply! I will take a look at what you suggested a little further and keep this updated if increasing the packet retry value actually rectified the problem just in case someone else has the same issue.

Cisco Historical Report no displays data after an CCX update

Hi team.
I have an issue with the Cisco Historical Report.
On December 14 we performed a version update of UCCX:
New Version 8.5.1.11004-25
Old Version 8.5.1.10000-37
Now I am informed by the Call Center Supervisor can not generate reports in the CHR with dates before 14 December.
When you request a report, for example, the 1st to March 31, 2012, the error "No report data to display the specified date range." (See attached image Cisco Historical Report (4). JPG).
When asked the same report, but from the 1st to 31 January 2013, the report is generated successfully and the Supervisor can see the data.
Anyone have idea why this happens?. You should not miss the update data to make and less with the UCCX server restart. Or can it?.
Thanks in advance.
Best regards.
Ernesto González

Up

Cisco Historical reports Data Mismatches

dear all
i need to ask you about cisco Historical reports, i am using UCCX 8.6 and CUCM 8.6
i am collecting data of calls presented handled and Abundant from these three reports:
ccdr Call detail
csq detail
call abandont detail
from all these reports data is different and difference is around 1000 calls of all month, abundant presented and handle all three are showing data mismatched,
Second question is which report i should use to get data of: presented calls, handled calls abundant calls and per agent abundant calls, please suggest
please help me to resolve this issue

Kindly read the following for better understanding of their relationship
a) UCCX Reporting Guide - Data reconciliation between reports
b) UCCX Report Developer Guide - Interpret Database Records
Thanks!
-JT-

Stage Analysis Report Issue

Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
Sharat

Hi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon

GR/IR GL Reporting Issue

1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
Mallikarjuna

Hi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu

BW Reporting Issue

Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]

Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna

User report issues in 1.1.0.21.97

A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsema

We have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue

Can't open packets in Wireshark from Cisco IME. Please Help.

Hello,
I am using the Cisco IME with a 4240 IPS. I am unable to "trigger" packet or open any of the packets in wireshark when I'm looking at an event. The little Wireshark button on the bottom right corner is just grayed out. Can anyone possibly help? Thank you in advance.

Are you using the latest IME version?
Have you tested this from a compute with a different OS?

Cisco IME express 7.1.1, service crashes every time I reboot Windows

Cisco IME express 7.1.1, service crashes every time I reboot Windows
Event Type:    Error
Event Source:    Application Error
Event Category:    (100)
Event ID:    1004
Date:        12/14/2011
Time:        7:37:35 AM
User:        N/A
Computer:    ABN-WELLS-HP
Description:
Faulting application IMEServer.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 49 4d 45   ure IME
0018: 53 65 72 76 65 72 2e 65   Server.e
0020: 78 65 20 30 2e 30 2e 30   xe 0.0.0
0028: 2e 30 20 69 6e 20 75 6e   .0 in un
0030: 6b 6e 6f 77 6e 20 30 2e   known 0.
0038: 30 2e 30 2e 30 20 61 74   0.0.0 at
0040: 20 6f 66 66 73 65 74 20    offset
0048: 30 30 30 30 30 30 30 30   00000000

Upgrade to 7.2.1 seems to have corrected problem

RESOLVED : Windows Phone – Download reporting issue related to 11/1/14 – 11/9/14 data

Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick

Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick

Odd Reporting Issue (ENTERPRISE)

I have a client with some users experiencing a rather odd reporting issue. The report runs fine, but only shows values for the totals and not the line items that make up the total.
For example, when I run the report (logged in as admin as well as under their ID), I see:
Net Sales 1,234
Cost Of Sales (1,111)
Gross Margin 123
When they log in on their machine, they see:
Net Sales
Cost Of Sales
Gross Margin 123
Very odd. I figured maybe it was an application setting, but the INI didn't look off anywhere particular.
They are running Enterprise 6.3.1 (yeah, insert comment here on the upgrade needed).
Any thoughts???

Check their Effective rights, and reset them, that has worked out for me. Otherwise, try copying the user and paste it as a new user and retest; I had to delete users and recreate them to correct problems of this nature.

Cisco ips ssm -- with cisco IME -- logs

Hi, can any one tell me how do i pull the logs from SSM mo
dule to the cisco IME server for log analysis.
i know that syslog is not supported in SSM and the only option is to have IME server...
-Rajesh

You will need to add the IPS-SSM module to your IME, and it will automatically pull logs from the module once it has been added to your IME.

Cisco IME Reporting Issue

Similar Messages

Maybe you are looking for