Cisco IOS supporting both voice and vpn

Hi Friends
i have one 2821 router.Can any one suggesting which ios will support both voice and vpn?

Questions like this are better/faster answered by checking feature navigator.
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
My suggestion is to run an MD release.
Also a big dated document:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_tech_note09186a00800fb9d9.shtml
For old software and hardware you can also check out Figure 1 here:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_506007.html
M.

Similar Messages

  • Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

    Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

    hello - I have just moved your post to the Topic forums - you had posted your question in an obscure non-visible promotional community  Hopefully our community users will see your question now.

  • Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel

    Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel.

    Hi Johnny,
    Per my understanding you can. It is equivalent to running 2 IGP and installing the entry in RIB table based on administrative distance. 
    -Nagendra

  • 881 IOS support for IPSEC and OSPF

    Is there an IOS image for the 881 that contains IPSEC feature set AND support for OSPF? I recently purchased an 881 and it came default with this system image "c880data-universalk9-mz.152-4.M4.bin", however this image does not support OSPF. I need an IOS image that supports both OSPF and IPSEC feature sets. Please advise.

    hi,
    according to cisco's FN, you might need a c880data-universalk9-mz.153-2.T1.bin.

  • Page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

    page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

    The viewport on a computer is adjustable by the user. iWeb sets the viewport width to the page width that you chose in the layout menu. No matter what the end user does, the page width is static and a reasonable compromise for the width of a web page that will be viewed on these devices is 980 to 1024 px.
    Safari on iOS devices cannot set the viewport. The viewport on mobile devices is fixed and its width depends on the orientation of the device. The iPhone in portrait mode has a viewport width of 320px. This means that the 980px wide iWeb built page will be squashed down to about one third of its desired size making it unreadable and difficult to navigate.
    Setting the viewport meta tag so that width equals the device width is a futile gesture since Safari on iOS will do that anyway. Its only useful if you add some initial scaling like...
    <meta name = "viewport" content="initial-scale=0.7">
    In the case of a 980px wide website, the initial scale is about 0.3 so any value higher than this will magnify the initial view of the site.
    Here's an example of a 980px wide page that has been given and initial scale of 0.7 which allows an iPhone user to see one column of a two column layout...

  • Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.

  • Mini DisplayPort to support both audio and video coming soon?

    So I notice that Apple updated the MacBook Pro Mini DisplayPort implementation to support BOTH audio AND video.
    Think this will make it’s way to the Mac mini soon, or an update still a long way off?

    Probably in the next refresh, but the mini was refreshed twice last year, so another refresh in less than a year would probably be too much for which to hope!
    There is always this US$49 wonder;
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2
    Dah•veed

  • [svn:osmf:] 15252: 1) SMILPlugin - SMILMediaGenerator class modified to support both live and vod smil files .

    Revision: 15252
    Revision: 15252
    Author:   [email protected]
    Date:     2010-04-06 16:57:34 -0700 (Tue, 06 Apr 2010)
    Log Message:
    1) SMILPlugin - SMILMediaGenerator class modified to support both live and vod smil files. SMILLoader modified to retain original resource metadata.
    2) AkamaiBasicStreamingPlugin refactored. This includes improved support for all types of streams while the plugin is loaded, added support for plugin metadata that can override built in defaults for a) live stream time out; b) whether or not the plugin should try to reconnect to a live stream if both primary and secondary encoders fail; c) the interval at which the retry should occur.  Added support for resource metadata for specifying connect-level and stream-level auth tokens so that these tokens do not need to be part of the URL (although this is acceptable also).
    3) AkamaiPluginSample app updated to support auth tokens which are not part of the URL (these are passed to the Akamai plugin via resource metadata).
    Modified Paths:
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
        osmf/trunk/plugins/SMILPlugin/org/osmf/smil/loader/SMILLoader.as
        osmf/trunk/plugins/SMILPlugin/org/osmf/smil/media/SMILMediaGenerator.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/.actionScriptProperties
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/AkamaiBasicStreamingPlugin.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/AkamaiBasicStreaming PluginInfo.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ion.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ionFactory.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetLoader. as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetStream. as
    Removed Paths:
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/

  • Understanding that the iPhone 5 won't support simultaneous voice and data transmissions over Verizon and Sprint LTE networks will it ever be able to support VoLTE (Voice over LTE)?

    Understanding that the iPhone 5 won’t support simultaneous voice and data transmissions over Verizon LTE network will it ever be able to support VoLTE (Voice over LTE)? Could Apple add VoLTE support later on? It seems pretty clear the MDM9615 chip supports VoLTE but the baseband software by Apple does not. Could Apple add it to the baseband later on? When will Verizon turn-on/enable VoLTE?
    Referral Link: https://discussions.apple.com/message/19614226#19614226

    Well in my research Verizon is already testing Voice Over LTE in select markets via a few news releases, and rumor has it that a few smartphones are already VoLTE ready. http://news.verizonwireless.com/news/2011/02/pr2011-02-09f.html

  • I have a BE6000 server, is it possible to me to make it do a DHCP for both voice and data? Kindly guide me through

    I have a BE6000 server, is it possible for me to make it do a DHCP for both voice and data? Kindly guide me through. Thanks

    CUCM can perform DHCP functions, but it's not meant to replace this functionality from a router or switch, which are the most common places to configure DHCP.
    I assume you'll have at least one of those, why not configure it there??

  • Which handheld devices support both J2ME and Wi-Fi?

    Which handheld devices support both J2ME and Wi-Fi?

    Hi,
    Got the Lumia CYan update yesterday hoping that it would fix my bluetooth problem. I have Cortana on my Hong Kong country variant but still bluetooth issue is not resolved.
    After pairing instance, the bluetooth does not re-connect on subsequent attempts (it does try to reconnect). On reconnect attempt it fails and presents "tap to pair" under the bluetooth network.
    Please help.
    Daman
    Lumia 1520
    Past: Icon, 928, 720, N9, N97(ugh)

  • Cisco Presence/Jabber both internally and externally

    We have installed the Cisco Presence server and intergrated it with our Microsoft Exchnage for ldap, Cisco Unified Communications Manager, and Cisco Unity Connection for phone and voicemail support.  It is all installed inside our corporate network and with my testing, I have found it to be available outside our Corporate network as long as I have a VPN configured and active from outside.
    However, management wants the enitre thing accessible from both within and from the outside without having to have a VPN connection. Does anyone know of a method for doing this or could point me to some good documentation as to what would be required?
    Thanks in advance.
    Gene

    If you are using Jabber onPrem with CUPS, the only way this will work (for now) is using VPN.  This will give the external using IM/Presence/CUCM.  You cant really open CUCM or CUPS via 5060 Ports and expect it to work.  The problem is the internal/external IPs are not proxied correctly and presence will not work.
    If your management really wants to have this seamless inside and out, the best solution right now is to use Jabber Cloud and use VPN back for CUCM call control on the client. (mobile or PC/Mac).
    Hopefully sooner than later we will see a "Presence gateway" that will sit in the DMZ and connect external IM clients to the internal CUPS server,

  • When will you make iOS app ADOBE VOICE and ADOBE SLATE for iPad usefull for iPhone too ?

    I want to use Voice and Slate on my iPhone : will it be possible soon ?

    I've also noticed that crashes increase with hand-animations, especially with embedded sounds. I think the reason behind this is that Macromedia in its latter year or so started a trend that Adobe has continued: to emphasize the performance of objects created and managed through code over ones created and managed on the timeline.
    I find that version control is a great way to handle this. Even if you aren't set up to use a central repository and don't want to be, both Git and Subversion support local repositories that will give you revision points to go back to without copies all over the place. If that's too much overhead, Dropbox also keeps a revision history and I have heard/read that you can go back to previous versions you have stored there. However, I don't know the specific details of how it works.

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

  • Is there a single sever supports both Jdev11 and Froms/Reports to deploy

    is there a single server to support both jdeveloper 11 and forms/reports to deploy on web.
    We currently have ias 10.1.2, deployed 10g forms/reports on web. we are developing new module in jdeveloper11. Can some one guide us, best way to integrate both? (we also have to implement ldap/sso soon for secuirty reasons)
    Thanks
    Lalitha

    Thanks for the reply.
    We have currently IAS 10.1.2 with forms/reports on sun machine.
    We also have brand new sum machine for other reasons. Now if we choose to use this new machine to deploy only new module which we developed in Jdev11, what would be the best steps we can take and eventually migrate/transfer old forms/reports modules to new machine.. can you please give your advice?
    Thanks
    Lalitha

Maybe you are looking for