Cisco ip phone 7960 cannot connect to call manager express

The 7960 ip phone seems not to connect to the call manager express
router and i have already put the firmware and configured the tftp
server,the rest of the phones the 7911`s are all working ok,i have tried
to reset the phone but it doesnt respond to the # key so as to reset to
factory defaults.
I have tried all the options of resetting it but to no avail.
could someone give me some techie tips on this ? could it be a hardware issue ?? please assist.

Go to the phone and check if the TFTP server is correct (should be the CME IP address). Also check the DHCP address.
Resetting 7900 Series IP Phones to Factory Defaults:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
Check the bug:
CSCed93627: Not able to reset 7970 back to factory defaults

Similar Messages

Login to cisco CME as Administrator failed check your call manager express

Hi Experts
CME and CUE in one router. when i access the CUE from the IE , i put the CUE username and password and i get in. After that it asks me to enter CME username and password to run the wizard. whenever i put the password i get this crappy message "Login to cisco CME as Administrator failed. check your call manager express config" i have cheked my config many times. Please let me know if someone has faced this problem or any suggestion on this. today is the 2nd time i have faced this problem , last time I cud not solve it and end up wasting 6 hours...
please help

Hi friend,
Here is the Prerequisites for Installing Cisco Unity Express Software. As David describes, may be the CME admin account is missing:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/installation/guide/prereq31.html#wpmkr1112912
Try this, and let us know.
Best regards,
- AdriÃ¡n.

Changing the Compact Flash on Cisco 2821 Call Manager Express

Hello All,
I'm gonna have to swap the compact flash on a Cisco 2821 who is serving as the Call Manager express and the Dialling Router.
What's the best way of approaching this? As far as i know it doesn't have a second slot? And i just can't plug it in and copy everything from 1 flash to another.
Must i copy all of the files on the flash to my tftp or? How can i be sure that everything will be copied to the new flash? I will be creating downtime i suppose? since when i'm copying towards the new flash the router will not properly work with the previous configuration

So i figured out that i can use the archive tar /create command:
To copy the entire flash towards TFTP:
archive tar /create tftp://X.X.X.X/flash.tar flash:
Now i will have to insert the new flash and probably format it first towards the correct file systems. Then i will have to use the next archive command:
archive tar /xtract "Here i am unsure of the syntax, i want to be copying and extracting the tar I backed up from the old flash"
After these steps are complete can i just reboot the router with the new flash card, won't there be any issues, since the startup config is on the NVRAM it will load the config properly, and i haven't seen any boot parameters but they shouldn't pose any issues since i'm not changing the flash slot.
Thanks for your assistance

TS1363 hi ive been given a second hand i phone but cannot connect it to i tunes i get a itunes error (OxE8000084). also cannot unlock phone thanks

hi ive been given a second hand i phone but cannot connect it to i tunes i get a itunes error (OxE8000084). also cannot unlock phone thanks

This may help:
http://support.apple.com/kb/TS3221
Regards.

What is The difference between Cisco Ip phone 7960 & 7960G

What is the difference between Cisco Ip phone 7960 & 7960G?

The 7960G is a 6 button Global phone where all the buttons are the icons and there is no writing on the phone.
For more information,
http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a0080091984.html
The only GB capable phone out today is the 7971G -GE.
http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet0900aecd801c5c4a.html

Cannot connect the call

Hello - I'm subscribed to skype to go and have been making calls for a few days without problems. All of a sudden i cannot connect any calls since last night. What should I do??

mariah-mtl wrote:
What should I do??
contact customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Add failed. [4911] Cannot connect to License Manager

Hello
I am facing a strange problem with our CCM, i cant add new phones (auto registration or manual add) although i still have 82 DLU's free
Always getting the error Add failed. [4911] Cannot connect to License Manager
I have tried restarting the Call Manager servral times and still same error appears
can anyone help ?

Hi mpagacz
I have checked the license manager service and it was the problem , it wouldn't start but i wasnt related to hardware issue
I found out from other community that it is a bug in my version 7.1.3 that when license exceeded certain limit that license service doesn't work
so i resolved the issue by deleting some licenses files
Also this issue was reported solved in 7.1.5 so i and doing the upgrade
anyway i have bought version 10.5 and will do the migration
thanks

Grid installtion failing with error Cannot connect to Node Manager. : Conf

I am trying to install Grid, however its failing with following error
I installed Weblogic server 10.3.4 and 11g R2 database
==============================================================
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 1>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
SEVERE: Exception: during stop of admin server
Thu Mar 03 21:49:03 IST 2011
Name of Exception: main.WLSTException
Thu Mar 03 21:49:03 IST 2011
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 2>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
Node Manager is not running
Mar 3, 2011 9:49:03 PM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:301)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:249)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx41.stopManagedServer$6(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py:142)
at org.python.pycode._pyx41.call_function(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py)
at org.python.core.PyTableCode.call(Unknown Source)

I am still getting error, even after installing Weblogic server 10.3.2
ar 4, 2011 10:44:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at node1.slksoft.com:7,403.
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:525)
at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
and also i am getting below error.
oracle@node1 grid]$ export ORACLE_SID=prod
[oracle@node1 grid]$ emctl status agent
EM Configuration issue. /u01/oracle/product/11.2.0/db_1/node1.soft.com_prod not found.
[oracle@node1 grid]$

Starting a Cisco call manager express

I have a cisco 2651 with Cisco call manager express.
I have too 15 IP telephones 7902G
The configuration is in factory default.
Ì have to create an IP pbx and extensions of a municipality with that components.
I's like that anybody helps me in the starting configuration, Where can I find good documentation about a tipical case like this?
I have a lot experience in networking and IP telephony but I'm newbie in CCME.
Regards

To begin the configuration use "telephony-service setup" command which will prompt you for some of the basic configuration ie how many phones, starting DN, etc. To add additional feature refer to the admin guide provided by Jorge link.
Chris

Phone License for Call Manager express

Dears ,
Is the phone license required for Call manager express or the license on the voice gateway enough for operating the phones ?
Regards,

Hi Ian,
I think I may have given you some bad info here. Sorry about that
Right to Use Feature Licenses
The following licenses do not Cisco software activation and you can begin using the features upon receipt of the Right to Use Notification
Feature License Name
Prerequisites
License Types
CME
IP Base & UC
Feature (Counted)
SRST
IP Base & UC
Feature (Counted)
VXML Gateway
IP Base & UC
Feature (Counted)
CUBE
IP Base & UC
Feature (Counted)
Land Mobile Radio
IP Base & UC
Feature
You should be good to go. But a quick note to
[email protected]
would be a fair idea.
Cheers!
Rob

Error occured while performing nmConnect : Cannot connect to Node Manager.

Hi There,
I am trying to connect to my node manager via WLST, however when I try to do so I get the following exception:
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : Read channel closed
I have searched Google for the reason behind this exception, but I couldnt find anything that explains why I am getting it.
Could someone help me out? All I want to do is connect to the node manager and then kill one of the nodes.
I should point out that the AdminServer and the node are the same machine.

The nodemanager will not accept SSL connections, I checked the config on WL itself.
I can confirm that it is also in nodemanager.domains
I have restarted the service and also bounced the box, but this hasnt helped. I get the following when running this command:
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<27-May-2013 14:08:43 o'clock CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<27-May-2013 14:08:44 o'clock CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Should it be going through all of this if I am trying to connect with plain text?

WLSTException: Cannot connect to Node Manager

Hello,
I am trying to connect to my nodemanager via the WLST rather than the service and get the following error. (I am using custom keystores instead of Demo)
wls:/offline> nmConnect('weblogic','1234',' xx.xx.xx ','5556','base_domain',':/Oracle/Middleware/user_projects/domains/base_domain','ssl')
Connecting to Node Manager ...
<Oct 17, 2012 4:52:38 PM PDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certifica
te parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. -For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupp
orted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Oct 17, 2012 4:52:41 PM PDT> <Warning> <Security> <BEA-090542> <Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configurati
on to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS se
rver behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : [Security:090542]Certificate chain received from xx.xx.xx - yy.yy.yy.yy was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore= DemoTrust on the command line for this client.
Thanks..

Yes Node Manager is running fine. I was able to overcome the above error, by using the following parameters while running Weblogic.WLST:
"java -Dweblogic.security.TrustKeyStore=CustomTrust -Dweblogic.security.CustomTrustKeyStoreFileName=<name>.jks weblogic.WLST"
Thanks,

FAX Machine like using Call Manager Express

Hi to all,
Let me share to your my problem, before we have this analog phone which connect to the our printer to have this fax machine to send fax letters, but since the phone line we used to send fax has been cut, so my boss wants me to set up a fax service using the extension number that we have in our CME (Call Manager Express) VOIP. can any one help me how to configure and set up one extension number of the VOIP using the Call manager Express Gui v7.1 or using the CLI. since i only have a basic knowledge in networking.
This topic first appeared in the Spiceworks Community

Much of Cisco's early SIP work involved proof of concept-proving that SIP worked in an IP telephony environment, with traditional features such as caller ID, call hold, call transfer, and three-way calling. Capabilities such as announcing a call transfer to the recipient before connecting the call (which involves setting up a media stream prior to connecting the call) had to be tested to make sure they would work through RTP streams and SIP-to-public switched telephone network (PSTN) gateways. Similarly, TDM out-of-band signaling (which passes information such as caller ID data) had to be passed via the SIP network.
Most of the early adopters of SIP technology were young service provider companies looking to differentiate themselves by providing IP-based services. They include Vonage, the IP-based telecommunications services provider that used Cisco SIP gateways and SIP analog telephone adapters (ATAs) to launch its service in 2001, and B2, a Swedish IP-based telephony service provider. But even companies such as Microsoft saw the promise of SIP as far back as 2001, when it launched the SIP-enabled Windows Messenger Update for its MSN .Net initiative. The Windows Messenger Update enabled MSN users to make SIP-enabled voice over IP (VoIP) calls from the MSN Messenger client, with Cisco providing the SIP infrastructure to Microsoft service provider partners.
Try URL:
http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_white_paper0900aecd80131325.shtml

Toll fraud traffic pumping on a Call manager express and unity express with an 800 toll free number.

I have a customer with a call manager express and a unity express. They have an 800 toll free number that rings in to an auto attendant on the CUE. The problem is something called toll fraud traffic pumping. The caller, always from a different number, reaches the auto attendant by dialing the 800 number. They then somehow manage to keep the line connected for up to 12 hours by somehow staying in the auto attendant. I opened a TAC case and was informed that it is not in Cisco's hands to create a way to disconnect a call that is connected to the CUE. I need a way to have a call that stays in the auto attendant or voicemail after 3 to 5 minutes. I can't see a way to do it in the auto attendant script. Can someone help with a method that will disconnect the caller if they stay in the CUE for a period of time?

Thank you for the response Jaime.
That is what TAC told me. I am not familiar with TCL scripting and I have been looking at some guides on it. Any advice on a source to go to for assistance with that, possibly someone to help?

Service application development with Call manager express

Hi everybody,
I just wanted to know is there anyway to push a message to ip phone when using Cisco call Manager express?
Thanks,
Parisa

Hi,
thanks for your reply. I have not worked with CME but we have an application for CM and want to be abale to use it for CME customers as well. and therefore I need to ask some more questions:
-Can we edit authentication URL on phone? As i knew, Authentication url on CM is not editable from phone. It is set on enterprise parameters on Call manager administration. Is it possible to edit this value directly on phone in CME?
-If I redirect authentication url to my application, what should it return back?
Thanks,
Parisa

Cisco ip phone 7960 cannot connect to call manager express

Similar Messages

Maybe you are looking for