Cisco IPT and Microsoft System Centre Operations Manager

Hi All
Does anybody used Cisco IPT with System Centre Operations Manager?
Does System Centre Operations Manager supports Cisco CallManager OS and Hardware for monitoring?
Thanks
VKS

Hi David,
Thanks for your reply. I have gone through the links which you have mentioned. As per the Overview of Operations Manager 2007 R2 section in What's New & Improved in Operations Manager 2007 R2 document it is clearly mentioned the below points:
Delivers monitoring across Windows, Linux and Unix servers–all through a single console.
Extend end to end monitoring of distributed applications to any workload running on Windows, Unix and Linux platforms.
The Cisco Servers are also Windows and Linux Based.
Thanks & Regards,
Vaijanath

Similar Messages

System centre operation manager 2012 exam paper code

Hi,
Can anyone please let me know what is the System centre operation manager 2012 exam paper code?
Regards,

Hi,
What do you mean by Exam paper code?
If you are looking for SCOM learning resource, you may refer to the links below:
https://technet.microsoft.com/en-us/library/hh205987.aspx
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/06/19/system-center-2012-self-study-guides-part-5-operations-manager.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Upgrade System Center Operations Manager 2007 R2 CU6 -- 2012 RTM issues (Assembly related exception in log)

Hi guys
I am currently performing a distributed, complex upgrade with a customer:
4 management servers (1 being RMS), both databases (OM & DW) on a single SQL Server (2008 R2 SP2)
We moved over the RMS role to another server and decomissioned the old one due to it being a 2003 server.
Then we upgraded all non-RMS management servers.
We had some issues with them as well (same error in the log), but when we reinstalled the 2007 R2 binaries & patches and redid the upgrade it came through fine.
The RMS however keeps throwing the same error. Things I tried:
- Full clean of the server including momclean and msizap, then reinstall the RMS and retry the upgrade
- Reregister of the msiexec server
I am suspecting some issues with assemblies and / or GAC, but no clear proof on that, only that it crashes after performing assembly operations.
Below an extract from the RemoveMOMServer.log (the error occurs when uninstalling SCOM 2007 R2)
Can anyone help out or give me some pointers on possible causes?
Many thanks in advance!
MSI (s) (F4:CC) [15:43:55:259]: Executing op: UpdateEstimatedSize(EstimatedSize=0)
MSI (s) (F4:CC) [15:43:55:261]: Executing op: ProductCPDisplayInfoRegister()
MSI (s) (F4:CC) [15:43:55:263]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommit,,)
MSI (s) (F4:CC) [15:43:55:264]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommit,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitUninstall,,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitUninstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,CustomActionData=C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager,
Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager.Common, Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.Foundation.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.ConsoleFramework.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
update /queue€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe update /queue€500)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitInstall,,)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitInstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:270]: Executing op: ActionStart(Name=PublishFeatures,Description=Publishing product features,Template=Feature: [1])
MSI (s) (F4:CC) [15:43:55:270]: Executing op: FeaturePublish(Feature=MOMServer,,Absent=3,Component=@+h863e0NAgaZ7OoE1)HM[lp(tNC_AUZ$SF(D`%aFTE9fFyfs=F=$JG3?U4%Jg+a[OgIJ9l,ltBUJ6}nEPr^ulwB]8CeSrDJOg^Dv6-5{b^j}@^?vz.j7,3M6C%7,*@eo93k8pr6&&N9$znhtI3,f=ds,sbkr{FsK5s,aat+W9Luq^c2T)%]NK-`Nh95Q?1j(Dg@M-ujVqmWklfnQ9{a+G7w.5xHY-FhkL+vZAB~5y'c@}'jr8WIsm`xe=5orHD{+mjmr3jr^W2UX?7PmxUa@v*Z]~U%@4u.j?-mBUeMsh74(}?767KRj@A72,VR{&Ndp=1kRf[ZQAWW2Vmir6O-EYNi`aVy0=sY*I`g=~^zgj-K41CWIAn3+(O4}ZvX8=hVDIvD^A&7iGA]RjL$JKo'QVT)b@Y@NcD-awAKEm,xN7,?,Ad7cW2b8}K?@`XVc]R`h8k*+PKa=CULr]CV`GY24=J**5wT+^.,Yw,vNCs'_A95dR?W8yIC[JXIm!nzq@5?Enk}PZewbi(r&t1H!94?5m0NzSd96@yq+0'^.?}G.RFEU^J@e`)a-_.e4@W?a@,yfmDTR]^+cbWf.=hV2Lk`!5yfUciqXO0JF?wIvuYFC{LBr*ENyKNMv9@3O~EdzJ!$jxy*dl]uq8{j_GLM1aC_g[-UdCQiC90o{ZS=lW(WUciqXme3eSKW@5fYZQ*R{[[yk0@XZAwJAUIK=yaPrb5j3zZII9*^7LD'L6,,V{p7-suLJ?`v(5R1a5&ko,1X$zkt~8Ic75fYZQ*RaE1v.2pOX8dqQ4PWI)'Vx5^d6cT~W@m1M]xA+z~*JWKX5swUG9JO-4h}&rH2H%obQfhOk?@2$kky4Qx]3yC3vPpLx@bP%U&2$(719F%lc[~}z8HzR.HDHZ)c]{SAz-boA9DSkLX$,eI5Tm1KmpVu+AzEhUp4Ka@(9k~3kSgQX@N@a@gaH@B-,TlvgYR`J9ET02Ay.r4F*v&OktBzm?8g^(@8)Udj
MSI (s) (F4:CC) [15:43:55:273]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
MSI (s) (F4:CC) [15:43:55:273]: Executing op: CleanupConfigData()
MSI (s) (F4:CC) [15:43:55:273]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=0,Remove=0)
MSI (s) (F4:CC) [15:43:55:276]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=1,Remove=0)
MSI (s) (F4:CC) [15:43:55:280]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=80035200)
MSI (s) (F4:CC) [15:43:55:280]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager,fileVersion="6.1.7221.99",version="6.0.4900.00",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",
AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:280]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:281]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:289]: Verifying accessibility of file: Microsoft.EnterpriseManagement.OperationsManager.dll
MSI (s) (F4:CC) [15:43:55:291]: Using source file security for destination.
MSI (s) (F4:CC) [15:43:55:304]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:304]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:305]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:306]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:306]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:307]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:308]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:308]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:310]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:310]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:310]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:312]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:59:483]: Internal Exception during install operation: 0xc00000fd at 0x0000000077C24EDC.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for silent install.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for non-console install.
MSI (s) (F4:CC) [15:43:59:483]: Internal MSI error. Installer terminated prematurely.

Thanks for you updating! For SQL related issue, please post on the following forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Yan Li
Regards, Yan Li

Management pack version difference in System Center - Operations Manager 2012 R2 - Help us.

Hi,
I have SC Operation manager 2012 r2 in my environment. It has managed with multiple management servers.
I have import some unsealed MPs through Ops SDK code and by manually using Operation manager console.
Here with i tried to install higher version of MPs and upgrade its version from 1.1.0.0 to 6.0.0.0.
case 1:
After successful installation of some MPs and check Operation manager console, it showing newly upgraded version(6.0.0.0).
Then i have import that MP and checked its version inside it showing 1.1.0.0(older version).
Here the imported MP has 1.1.0.0 version and console showing its version as 6.0.0.0.
Why it showing different versions in imported MP(inside xml) and Operations manager console view?
case 2:
After that i tried to import other MPs using console. But it showing below error;
Verification failed with 1 errors:
Error 1:
Found error in 2|Monitoring.ActiveDirectory_server|6.0.0.0|Monitoring.ActiveDirectory_server|| with message:
Could not load management pack [ID=Monitoring.Base, KeyToken=9e875220a3987e0b, Version=6.0.0.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Monitoring.Base, 9e875220a3987e0b, 1.1.0.0]) requested from the database was version 6.0.0.0 but the actual version available is 1.1.0.0.
Its happened in multiple management servers scenario. So Is any possibility to happen because of multiple management servers scenario?. There is no issues in this same MPs while i tried in single management server. These same MPs are imported and working
fine in single management server scenario.
Help me to solve these 2 issues!!
Thanks,
satheesh

1) At first, you should make sure that the imported MP has correct version. I will open the XML of the imported MP and check its current version e.g.
When you open the xml file of imported MP, the version number is shown as
<Manifest>
    <Identity>
        <ID>Microsoft.SystemCenter.Visualization.Component.Library.Resources</ID>
        <Version>1.0.0.2</Version>
    <Identity>
    <Name>Resources library</Name>
    <References>
        <Reference Alias="System">
        <ID>System.Library</ID>
        <Version>1.0.0.1</Version>
From the above sample, the imported MP version number is 1.0.0.2.
2) I am using operation console to import the management pack and check the version number in operations console whether it is updated to new version 1.0.0.2
3) Using operations console to export the MP which has imported in step 1) and open it to check what is the version number of MP. Make sure that the version is 1.0.0.2
4) If the above procedure provide a prefer match of version number, re-import all problematic MP.
5) At last, you may use the following SQL to check whether the correct version number of MP is stored in DB successful
select version, friendlyname from managementpackview where friendlyname like 'Microsoft.SystemCenter.Visualizatio%'
Roger

Planning System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster

Dears,
I'm planning to deploy System Center Operation Manager 2012 R2 on SQL 2012 Active/Passive Cluster which have other sql instances running for other applications. And i'm planning to create a new instance for SCOM, kindly provide me recommendation
whether i can install all sql databases for SCOM on same sql instance or does it require separate instances for opsmanger database , dw database and ACS database?
Thanks in advance..

Hi,
Yes, all SCOM SQL databases can run on the same instance of SQL server.
As well, look at some helpful posts for the topic:
http://technet.microsoft.com/library/dn281933.aspx
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
This is the included information.
Problem Event Name: CLR20r3
Problem Signature 01: setupchainerui.exe
Problem Signature 02: 7.0.9538.0
Problem Signature 03: 509042f2
Problem Signature 04: System
Problem Signature 05: 4.0.30319.18022
Problem Signature 06: 506a7689
Problem Signature 07: 1cf5
Problem Signature 08: 72
Problem Signature 09: System.UriFormatException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 79c6
Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
Additional Information 3: 88ec
Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
The only error I get in the log file is this.
Error: :Error:IsReportingValidToInstall failed SRS instance not provided
I don't understand why I would be getting an SRS error, our reports run fine.
Thanks,
Gary

Hi Gary,
Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
App Log Errors:
Application: SetupChainerUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
Stack:
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
   at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x638
Faulting application start time: 0x01cf9a697847d9c8
Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
Faulting package full name:
Faulting package-relative application ID:

System Center Operations Manager 2012 R2 Evaluation version.

hi can any one help me with the link to download the iso file for System Center Operations Manager 2012 R2 Evaluation version.Thanks

Hi,
Download Link:
http://care.dlservice.microsoft.com/dl/download/evalx/sc2012r2/SC2012_R2_SCOM.exe
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Extending System Center Operations Manager Classes & Discovery SCOM 2007 R2

I want to add some additional attributes to SCOM that are populated from information in another database.....for example.
I have a CMDB that contains information about the support level for each server (i.e. gold, silver, bronze), i want to be able to display this information in the SCOM console. This needs to cover both Windows and Unix/linux servers.
I have played around with creating a custom MP and have created a new class, and custom script discovery using a vbscript to query the CMDB SQL database containing the info that i want....I have got to the point where i can see the new column in SCOM console
but cannot get it to populate with any data.
any help would be appreciated.
thanks

Hi,
Here are some good articles about extending SCOM classes, please go through them:
Extending System Center Operations Manager Classes & Discovery
http://blogs.technet.com/b/stufox/archive/2008/07/23/extending-system-center-operations-manager-classes-discovery.aspx
Extending Windows Computer Class using Visual Studio Authoring Extensions (VSAE)
http://blogs.technet.com/b/emreguclu/archive/2012/11/07/extending-windows-computer-class-using-visual-studio-authoring-extensions-vsae.aspx
http://blogs.msdn.com/b/steverac/archive/2011/09/16/extending-a-class-in-the-authoring-console.aspxRegards,
Ya Li
Regards, Yan Li

How System Centre can manage Azure ?

Hi
How System Centre can manage Azure in better way?
Is there any better tool available in market, which can manage Azure.. ?
Thanks, Kk

only two possibilities i see here
make these VM part of your network so they are visible to the System center, this can be done by creating a vpn or use system center that allow you to manage cloud VMs without having them in vpn, which i believe is called "System
Center Management Pack for Windows Azure"
The System Center Management Pack for Windows Azure enables you to monitor the availability and performance of resources that are running on Windows Azure. The management pack runs on a specified resource pool and then uses various Windows Azure APIs to remotely
discover and collect instrumentation information about a specified Windows Azure resource, such as a Cloud Service, Storage or Virtual Machine. The Management Pack for Windows Azure provides no functionality on import. For each Windows Azure subscription that
contains Azure resources you want to monitor, you must configure discovery and monitoring by first using the Windows Azure wizard in the administration section of the OM Console, then the Windows Azure Monitoring template in the authoring section of the OM
Console.
you can download it from
here
Hope this helps
Please mark as answered if it helped
Vishal Narayan Saxena http://twitter.com/vishalishere http://www.ogleogle.com/vishal/

System Center Operations Manager 2007

Hi,
Is there anyone who is monitoring their IronPort C-series with System Center Operations Manager 2007?
If so, is there anything I should look out for implementing it?
/Fredrik

Hi
If scom supports SNMP, then we can monitor Ironport devices. We can monitor Ironport via Solarwinds and Hp openview.

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

Cisco NAC and Microsoft NAP

Dear all,
I need to know what are the differences between Cisco NAC and Microsoft NAP ?
Can NAP be used instead of NAC or not ? why ? why not ?

I really do not know if you will find the answer that you are looking for. From what I remember NAP was an option that was available with the ACS via a special patch. This is only supported for vista clients if memory serves me correct.
Here is the link that will help you with the basics.
http://www.cisco.com/en/US/netsol/ns466/index.html
We do not get much case volume or exposure to the NAP solution and with ACS 5.2 and ISE around the corner it might be too late to go through this setup and then run into issues with acs 4.2 possibly hitting eol/eos.
Thanks,
Tarik

Microsoft System Center Configuration Manager 2012 R2 Reports

Hi ;
I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
all , i don't have any problem with queries.I am waiting for your helps.
Sincerely yours ,

Hi,
It sounds like this should be the solution for you, changing the account for the SRS service.
http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Interesting SCOM Reports and "Microsoft System Center Virtual Machine Manager 2012 R2 Reports" MP Issue , Some reports appear others don't

Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
with scvmm and I’m having issues with the chargeback reporting.
I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.

Hi,
Hope the below link could be helpful:
Enabling Chargeback in a Service Provider Cloud by Kristian Nese
http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
Regards,
Yan Li
Regards, Yan Li

Agent Failover and AD Integration in Operations Manager

Hi
I got some queries around SCOM agent failover and AD Integration:
Does the discovery wizard differentiates between domain-joined and workgroup systems in terms of deploying agent on them?
Why do we ever need Active Directory Integration with Operations Manager as described here
http://technet.microsoft.com/en-us/library/hh212922.aspx
- is it required for non-domain joined Windows systems or any other systems? All the other documents I read are saying that Windows agents can failover to other available MS in resource pool if their currently assigned MS fails and fails back automatically
as soon as it comes back online.
Is the automatic failover applicable to agents installed using client push (Discovery Wizard) Or it applies to agents installed manually using MOMAgent.msi?
Also referred to this article
http://blogs.technet.com/b/meamcs/archive/2013/05/10/is-ad-integration-or-manual-scom-agents-required-to-allow-automatic-windows-agent-failover-between-multiple-scom-management-servers.aspx
but doesn’t seems to be having grip on it so far. Request some details on the above points.
Thanks
Taranjeet Singh
zamn

Hi,
For the first question, I don't think we can use discovery wizard to install agent on non-domain joined computers. Please refer to the below links for how to deploy SCOM agent to non-domain computers:
http://blogs.technet.com/b/quenguyen/archive/2011/07/13/monitoring-non-domain-servers-using-scom.aspx
http://blogs.technet.com/b/stefan_stranger/archive/2012/04/17/monitoring-non-domain-members-with-om-2012.aspx
For the second question, as we can read from the below link:
http://blogs.technet.com/b/meamcs/archive/2013/05/10/is-ad-integration-or-manual-scom-agents-required-to-allow-automatic-windows-agent-failover-between-multiple-scom-management-servers.aspx
SCOM windows agents automatic failover does not require AD integration or PowerShell scripting or Configuration Manager or manual agents installation specially for small to medium environment and agents distribution between different SCOM management servers
can be accomplished through push agents wizard, and windows agents failover can be simply verified from event viewer.
Regards,
Yan Li
Regards, Yan Li

Cisco IPT and Microsoft System Centre Operations Manager

Similar Messages

Maybe you are looking for