Cisco iron port

dear sir
i have a project for Iron port c170 and s170 the problem our customer need two c170 and two s170 to make clustering or redundancy.when i am searching i did not see any validation design clustering for c170 or s170 can you help me please
best regard

Additionally if the application is using the proxy settings but using some non standard port it might be blocked. Verify the port is allowed to go through by checking the Web Security Manager -> Access Policies -> Protocols and User Agents -> HTTP Connect ports. If the port is not allowed in there, it will not allow the application to create a connection.
Christian Rahl
Customer Support Engineer
Cisco Web Content Security Appliance
Cisco Technical Assistance Center RTP

Similar Messages

Cisco iron port feature activation code error how to resolve that?

cisco iron port feature activation code error how to resolve that?

I have fixed this problem successfully.
The problem was with the referral attribute of the cfldap tag.
After adding this (referral="yes") attribute to my code I am able to login into my website.
<cfldap action="QUERY" server="#application.LDAPServer#" port="#application.LDAPPort#" start="#application.LDAPBase#" name="search" attributes="alias, dn, uid, technicalCareerLevel, locationorgunit, givenName, sn" filter="#filter#" scope="SUBTREE" maxRows="2" referral="yes">
Any way thanks for your assistance!!!!!

2 Cisco Iron Port (Cisco C370) Email appliances Solution Required

Hi All,
I NEED THE
technical proposal based on below requirements:
2 Cisco Iron Port (Cisco C370) Email appliances with below options for 3000 users licenses:
1) Anti-spam
2) Anti-virus
3) Content Filtering
4) DLP
5) Encryption (Optional)

Any technical proposals will need to be provided from your Sales Ops/Account team - or reseller. I would suggest opening a dialouge with them, in order to get the answer you are looking for. It will not come from the support forums.
http://www.cisco.com/web/services/order-services/index.html
https://grs.cisco.com/grsx/cust/grsCustomerSurvey.html?SurveyCode=4161&KeyCode=195185_1
http://www.cisco.com/en/US/products/ps10154/index.html
Hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

2 Cisco Iron Port (Cisco C370) Email appliances solution

i need
technical proposal based on below requirements:
2 Cisco Iron Port (Cisco C370) Email appliances with below options for 3000 users licenses:
1) Anti-spam
2) Anti-virus
3) Content Filtering
4) DLP
5) Encryption (Optional)

Any technical proposals will need to be provided from your Sales Ops/Account team - or reseller. I would suggest opening a dialouge with them, in order to get the answer you are looking for. It will not come from the support forums.
http://www.cisco.com/web/services/order-services/index.html
https://grs.cisco.com/grsx/cust/grsCustomerSurvey.html?SurveyCode=4161&KeyCode=195185_1
http://www.cisco.com/en/US/products/ps10154/index.html
Hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

Cisco Iron port ESA licensing

Hi Team,
We are using 20,000 mailbox/user Antispam/Antivirus license for cisco ironport email security appliance. Customer want to know the impact on email scanning if they rduced their user count to 10,000.
will this affect the volume of traffic being scanned and processed by the appliance concurrently or not ?
As we are not configuring mailboxes on the ironport devices ,how come the ironport device calculate usercount/mailbox ?
does the user count means simultanious connection per second?
please help me to find a solution
Regards
Muhammad

Ironport ESA and WSA licensing is trust-based: you should purchase the amount of licenes that reflects the amount of users behind an Ironport device (email gateway or web proxy), but the actual users aren't counted.
Sent from Cisco Technical Support iPad App

How to tag spam mails in iron port and foreword to junk folder?

How to tag spam mails in iron port and foreword to junk folder?

As Dave has suggested.
Positively identified spam recommended actions would be to Drop it -- if you would like to review these emails and manually remove it, then send it to the spam quarantine
This can be changed under the GUI > Mail Policies > Click on Incoming or Outgoing mail Policies and edit the anti-spam settings per policy if needed.
Ideally suspected spam to be sent to the quarantine for further review.
If you do not wish to use a quarantine or drop the email, you can prepend the email as Dave also suggested and send it to the end recipient under [Suspected Spam] <Subject> for the end user to determine it.
However the IronPort will not make specific rules to deliver it to the MUA's Junk mail folder.
This type of setup is normally down to each specific end user to work with on their own MUA (outlook, lotus, safari etc.)
I hope this helps.
Regards,
Matthew Huynh

SMTP+Iron port out going mail issue

Hi,
One of the EBiz instance is configured with Iron port SMTP server for outgoing workflow mails.
Th IRONPOrt mails are relayed using round robin technique.
From the EBiz server OS if i fire mails the mails mails are relying using the round robin technique but from Oracle if i am firing some test mails all of them are relying though only smtp server where the scenario should be both the Iron port server should fire mails in a round robin fashion.
Just want to know if there is anything from Ebiz notification mails side we need to take care.
Ajay

Outgoing mail shouldn't be using port 993, that's an incoming mail port (IMAPS). Outgoing should be using either port 25, 587, or in some cases, 465.

Does Solaris 10 support cisco Virtual Port Channels over IP?

Does anyone know if Solaris 10 support cisco Virtual Port Channels open IP?

Hi user11114413,
The issue you are seeing actually has little to do with VIP, and more to do with there being multiple IP addresses for us to choose from on your box. For such multi-IP boxes, you'll want to tell us the IP to use, and in your case you want to tell as a VIP. This can be done either by editing your operational configuration file, and including an <address> element within the <unicast-listener> element, or via the tangosol.coherence.localhost system property. For example:
<unicast-listener>
    <well-known-addresses>
        <socket-address id="1">
            <address>1.2.3.260</address> 
            <port>8088</port>
        </socket-address>
    </well-known-addresses>
    <address>1.2.3.260</address> 
    <port>8088</port>
</unicast-listener>or
java ... -Dtangosol.coherence.localhost=1.2.3.260If you are using the same operational configuration on all nodes in your cluster then the system property approach is likely preferable, and would only be necessary on the two machines sharing the VIP.
As for using VIP or an extended WKA list, the choice is yours, either will work. If you do go the VIP route, it would obviously be a very bad idea to simultaneously use the same VIP and port at the same time from the two machines.
thanks,
Mark
Oracle Coherence

How to search/Scan Vlan of cisco switch ports

Can any one tell me how i can scan/search vlans of cisco switch port through any monitoring tool (orion/solarwinds).
Consider this scenario as i have no access to switch and i want to know below things:
1-Vlans created on switch?
2-which switch port belongs to which vlan id?
Thanks

Hi,
You can do it only with hub in between and also please note that when sniffing with Wireshark on Windows the OS would remove VLAN tag so you may need to use Linux machine.
Regards,
Aleksandra

Find IP address/machine connected to a cisco switch port

hello,
I need to know which IP/device is connecetd to a cisco Switch port.
I can get the mac-address of that switch port using sh mac-add command, but with the mac address how can i find that which ip belongs to this mac.
is there way i can do this, i know i can do the other way meaning with IP i can find to which port its connected ,but dont know how to find this MAC to IP with switch without the need for additional tools

Hey Anantha ,
Hop u r doing good,
If u dont know ip address of devices present on specific vlan and wanted to track end device ip address please try
follow this below
steps 1:ping it to brodcast ip address of subnet
for ex
R1--SW1--SW2--(H1
                             --H2
R1..1.1.1.1/24
H1..1.1.1.2/24
H2.1.1.1.3/24
So u r brodacast ip is 1.1.1.255
ping 1.1.1.255
Sending 1000, 100-byte ICMP Echos to 1.1.1.255, timeout is 2 seconds:
Reply to request 8 from 1.1.1.2, 28 ms
Reply to request 9 from 1.1.1.3, 64 ms
u will get reply from all host present on that segment and ur arp table will get flood with ip and respective mac on
your L3 device...(R1 in this example)
Step2: then u can use command
sh ip arp ..to see ip and respective mac associate with it
R1#sh ip arp
Protocol Address          Age (min) Hardware Addr   Type   Interface
Internet 1.1.1.1                 -   c000.2498.0000 ARPA   Vlan2
Internet 1.1.1.2                 0   c003.2498.0000 ARPA   Vlan2
Step3: see the mac learned from specific port
R1#sh mac address c003.2498.0000
Destination Address Address Type VLAN Destination Port
c003.2498.0000          Dynamic       2     FastEthernet1/1
Step4:If u have all cisco devices then u can use CDP
to check wht device connect to ur interface
R1#sh cdp ne fa1/1 detail
Device ID: SW1.lab.local
Follow this way, hop u will trace devices present on ur network
Hop this informative,
Regards,
Ashish shirkar

Iron Port S370 Hard Drive activity lights

Hi
We have a S370 Iron port and one of the hard disk light Flash green twice and the 3rd time it goes amber. What doe sit mean!! please help. All our other Iron ports hard disk lights flash green.
How can we check? Please advice.

The hard drive is failing. Call TAC and get it replaced.
(PS. its a Dell server, so any hardware troubleshooting, their docs are applicable.)

Cisco 4-Port ISDN-BRI Network Module

Cisco 4-Port ISDN-BRI Network Module
what does the BRI mean?
I have this module in a 2600 series router. Can it be used for basic LAN connection (like a hub)?

First, to answer your question: No, you cannot.
ISDN is a Telco technology and protocol suite.
"BRI" stands for "Basic Rate Interface," also described as "2B+D" for two Bearer channels and a "D" channel, which is used for control signaling in some configurations, and additional bandwidth in others.
Max throughput is either 128K (2 X 56K or 64Kbps per channel) or 144Kbps (2B+16K that may be available in the D channel depending on your config.
ISDN requires an intermediate telco-style switch between the clients and can't be used back-to-back directly.
Good Luck
Scott

Airport Extreme dropping connection with a Cisco 5 port Giga switch

I've connected a Cisco 5 port Giga switch SG100D-05 to one of the LAN ports of the Airport Extreme and for some reason the connection is being dropped or it fails to connect. Any idea of why this is happening and how can it be fixed?

If you have not already done so, you might want to do some basic troubleshooting to try to isolate the cause of the issue.
To do that, temporarily disconnect the switch and power it off. Connect a computer with an Ethernet port on it to the LAN port on AirPort Extreme and turn off the wireless on the computer.
Test to see you can get a good Internet connection this way.
If you can, then you know that the LAN port on the AirPort Extreme is functioning correctly and your troubleshooting efforts will need to focus on testing each port on the Cisco switch.
If you cannot get a good connection with the computer connected directly to the AirPort Extreme, try another Ethernet cable that you know is working to eliminate the possibility of a bad Ethernet cable, which is the culprit more often than you might think.
Please post back on the results of your testing.

Iron port S370 authentication issues.

Hi All,
Noticed the following errors in the iron port device.
Users are having issues with network printers..
PROX_AUTH : - : NTLM CRAP authentication for user [] returned NT_STATUS_ACCOUNT_EXPIRED (PAM: 17)
PROX_AUTH : - : Login for user [EE]\[user] failed due to [Account expired]
PROX_AUTH : - : NTLM CRAP authentication for user [] returned NT_STATUS_ACCOUNT_EXPIRED (PAM: 17)
PROX_AUTH : - : Login for user [EE]\[user] failed due to [Account expired]
PROX_AUTH : - : NTLM CRAP authentication for user [] returned NT_STATUS_ACCOUNT_EXPIRED (PAM: 17)
PROX_AUTH : - : Login for user [EE]\[user] failed due to [Account expired]
PROX_AUTH : - : NTLM CRAP authentication for user [] returned NT_STATUS_ACCOUNT_EXPIRED (PAM: 17)
PROX_AUTH : - : Login for user [EE]\[user] failed due to [Account expired]
Not an expert...any help appreciated..
Thanks..

Hello Sir,
Finally Its Done!!!
now all the DC users are integrated in ironport, but i have one more issues with this..
i have crerated one access policy for single computer in which i have given a specific AD group..
whenever i am trying to access the internet on that computer it is asking for username passowrd..but it works with any AD user....only specified groups member should get authenticate..but it will get auteticate with any AD user other than specified group of users..
basically i wanted assign internet access as per the group..so only specified groups should get authenticate...not all
can you please help me in this...
Thanks

Cisco IPS (global correlation) is downloading lots of updates from the iron-port website

I have query on Global correlation.
Following is the observed behavior
Scenario 1:
Global Correlation Inspection: ON (Standard)
Reputation Filter: ON
Result: Global correlation downloads in bytes or KBs (observed on proxy)
Scenario 2:
Global Correlation Inspection: OFF
Reputation Filter: ON
Result: Global correlation downloads 4-5 MB every 5 Minutes (observed on proxy)
This behavior has been observed on both IPS devices one by one. What we wanted the clarity on is why is does global correlation download so much of data when it is OFF, and downloads only minimal data when ON. The equation does not seem to be right.
Request you for your prompt response.
Regards,
Neal

Both global correlation and reputation filtering retrieve updates from the SensorBase network, or IronPort. By default, they communicate with the network every five minutes. This value cannot be changed by the IPS administrator.

Cisco iron port

Similar Messages

Maybe you are looking for