Cisco IronPort Alert Notification 12/15/2011

To Cisco IronPort customers:
License key notification emails that were sent from Cisco IronPort yesterday between 11am and 4PM PST and that appear to have incorrect end dates can be disregarded. The key information within those emails contained old data. Customers can view their correct license key information through the Cisco IronPort appliance GUI.
We sincerely apologize for any confusion this has caused.
Best regards,
Cisco IronPort

Hi, this is a (XML) report generated by AutoSupport feature. It contains information about alerts, uptime, output of status command etc.
AutoSupport is used by Cisco to better support and design future system changes and it can be used for some troubleshooting purposes also.
AutoSupport can be enabled/disabled in System Administration -> Alerts -> Alert Settings.
You can choose to send these reports only to the Cisco and not to send weekly reports to system users configured on the appliance by removing checkbox "Send copy of weekly AutoSupport reports to System Information Alert recipients.". Reports are sent to users configured to receive system alerts (info level).

Similar Messages

Cisco IronPort AsyncOS 6.7.6-068 for Management GA Notification

Cisco is pleased to announce the General Availability (GA) of a new major release of AsyncOS 6.7.6-068 for
Management to all customers. This release applies to all our Security Management Appliances (M-Series).
AsyncOS 6.7.6-068 for Management enables Centralized Tracking and Reporting for the new features introduced in AsyncOS 7.0 for Email.
New Features and Enhancements in AsyncOS 6.7.6-068 for Management
New Feature: Centralized support for the reporting and tracking changes in the AsyncOS for Email release 7.0:
RSA Data Loss Prevention
Marketing Message Detection
New Feature: Reporting by ESA Groups
Enhanced: Domain-Based Executive Summary Report now configurable by:
Domain of Email Server
Domain of Email Address
Fixes in AsyncOS 6.7.6-068 for Management
Fixed: MemoryError after losing Housekeeper thread [Defect ID: 52048]
Fixed: The Show Details link results in a timeout [Defect ID: 51558]
Fixed: Safelist/Blocklist should be exportable via CLI [Defect ID: 43360]
Fixed: LDAP Query strips spaces [Defect ID: 46099]
Fixed: Tracking database time does not update after system timezone is changed [Defect ID: 49407]
Fixed: Application error when accessing Online Help from the End User Spam Quarantine page [Defect ID: 52395]
This release has gone through our beta program, internal soak tests and is also running in production at our FCS customers.
Please upgrade at your convenience and let us know how you like this new release!
Cheers,
Jakob

Hi,
We identified an issue in AsyncOS 6.7.6-068 for Management that under certain circumstances can cause loss of historical reporting data when reporting groups are configured. To ensure a high quality release, further testing on our side is required.
6.7.6-068 is no longer available for upgrade to your M-Series appliances.
If you already upgraded to 6.7.6-068 we strongly recommend to disable group based reporting to avoid being affected.
We expect to release a new improved build of 6.7.6 shortly and apologize for any inconvenience or confusion this might have caused.
If you are required to upgrade to 6.7.6 before a new build is available, please contact Cisco IronPort Customer Support.
I'll let you know once the new build is available...
Best Regards,
Jakob

Cisco IronPort Customer Support - Alert

Dear Cisco IronPort customers.
As of 2:30PM PST 08/06/2010 the Cisco IronPort Customer Support ticketing system experienced a system problem that may prevent customers from being able to view their open support tickets. If you are encountering a new Cisco IronPort appliance problem or need an update on an existing problem, please call us at (877) 641-IRON or (650) 989-6533.
We hope to have this problem resolved within the hour, and appologize for the inconvenience.
Cisco IronPort Customer Support Management

Update As of 3:32PM PST the Cisco IronPort Customer Support ticketing system problem has been resolved. Customer should be able to view their tickets and ticket updates at this time.

Remote alert notification when s2s tunnel tears down

Does anyone have any insight on how to set up an alert notification (say email) natively whenever a s2s tunnel comes down. Currently experiencing some infrequent s2s issues on an ASA5510 - IOS 8.0(3)

You create a class for that level and then have it emailed to you.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml

Emil Alert Notification

I have created a form that end users can submit through acrobat.com. Is there a way to have a script notify the form administrator (myself) that a form has been submitted by an user as soon Asa they hit the submit button? Any other possible solutions as far as generating a e-mail notification alert with a script?Thanks in advance for all your help!

Hey Try,
Thanks again for the prompt response. How would this read in a script? I'm
trying to have it done silently but keep getting errors with the one I
have.
Thanks for helping a young Acrobat enthusiast here!
From:   try67 <[email protected]>
To:     Omar Lopez Nunez <[email protected]>
Date:   07/22/2011 08:36 AM
Subject:        Emil Alert Notification
You can use app.mailMsg(), but if it's not running from a trusted context,
then you can't use it silently and the user will have to manually send you
the email, which is not ideal...

Application for message profile in alert notification

Dear all,
While creating message profile for alert notificaions we have application e.g. ALEN, AMON etc.
Request to please let us know the significance of these applications? And are these sap standard?
Regards,
mahesh.
Edited by: mahesh m on May 13, 2011 9:45 AM

Hi Mahesh
First of all, thats a good question
You are right, these are SAP standard application ids
Currently the following business applications use the following application ids regarding alert notifications:
u2022     SNC, SPP: ALEN
u2022     EWM: AEWM
u2022     APO: AMON
Different application ids mean different handling of alerts and alert notification profiles, so that they can handle their respective application like SNC SPP alerts and profiles.
In simple way SNC application screens alerts/profiles are grouped under ALEN
Best Regards
Vinod

How to configure ML Server to send Alert Notifications by mail?

Is it possible to configure Mountain Lion Server to send out Alert notification by e-mail without enabling full Mail services?
I don't want to run the Mail service on the Server. I'm quite happy with my ISP's mail service. Besides, I have a dynamic public IP address, hence no rDNS entry (so I couldn't run Mail if I wanted to). And I don't have the expertise to configure and maintain the Mail service. But I would like to get the Server to send me any important alert notifications by e-mail.
I have access to an authenticated SMTP server I can use to relay the outbound alert notification emails. But I don't know how to coerce the alert service into using it. Is it possible to do so, or does one need the full-blown Mail service to be configured (with both dovecot and postfix running) in order to get Alerts to be e-mailed?
Thanks for any help.

@MrHoffman,
Thanks for the pointers and suggestions.
The config for my ISP's SMTP server is correct. I specified the port (:465), and double-checked userid/password. It's the same as used by all our e-mail clients (a half-dozen or so on various Macs, iPhones, iPads, Linux boxes), all of which work fine from my LAN.
As for DNS, it seems OK. (I am indebted to you for the excellent series of articles on servers and networking at http://labs.hoffmanlabs.com/node/1705 )
The changeip command reports:
The names match. There is nothing to change.
dirserv:success = "success"
However, I should point out that I do not have the DNS service enabled on ML Server. I already have a local DNS running on my gateway router. (it's an instance of the dnsmasq process that is part of Tomato firmware). It has local names defined for all the servers and hosts on my LAN, and provides rDNS for them as well.
However, what I haven't done is enabled the Mail service. You've (slightly) misunderstood the core of my plan. My intent is not simply to secure the local mail server against remote access. I don't want either remote or local users from accessing the mail server. I don't want it listening for POP or IMAP connections from anywhere (on my LAN or remotely). I don't want it receiving inbound mail from anywhere. I don't want it relaying outbound mail for any client on my LAN. All I want the ML Server to be able to do is to send me alerts (by e-mail) when it's in need of attention. Other appliances on my LAN (eg. a NetgearReadyNAS) can send me e-mails when they are unhappy, and I hope I can coerce the ML Server to do the same.
I know I don't have the expertise to operate and maintain my own mail server, and I'm quite happy with the mail service provided by my existing network service provider. Plus, I'm behind a cable modem with a dynamic IP address, so I'm unable to establish my own rDNS record (which I understand is required to handle inbound mail).
It looks like the next step is to turn on the Mail service. But I'm sure it's going to be unhappy since there's no MX record set-up. I was hoping there was a way that ML Server could simply send out its own outbound alerts (using my ISP's SMTP relay) without having the incoming part of the mail service active. But perhaps Apple didn't anticipate that sort of configuration.

Alert notification configuration for Deadline

We are in SRM7.0. For Sc and PO,I have to send alert when the workitem is not processed for 48 hours. I did the configuration in SPRO. The system is trying to send the alert. Whne I check the log in SLG1, it is giving the error message as 'No alert category found'.
When I check the SOST, I see mails with subject 'Alert could not be delivered. Please check document &OBJECT_ID&'. All are in
error status. The send method used is 'RML'. I could see the message 'Cannot process message, no route from <user1> to <user2>.
In SCOT, there is no node created under RML.
Can anyone help me in configuring this alert notification for deadline?
Thanks,
Sivagami

Hi
Did you Verify your configuration in IMG > Application Server>Basis Services-->Generic Business Tools --> Alert Management
These configurations are required for you to set up Deadline monitoring
1. IMG activity Define Transaction Types
2. IMG activity Define Events
3. IMG activity Define Alert Categories - In the event schema the alert categories are assigned as Subcategories only to events that are to generate alerts. They determine the recipients and the subscribers ( Subscription) and also the short and long text of the alerts. SRM supplies a predefined alert category for the relevant object type in the classification SRM Alerts and you can copy and modify this.
This is done in Event Control for the Object TYpe and Event Schema Combination in Deadline Monitoring COnfiguration under Process Controlled workflow configuration. Make sure each event which you are scheduling is having a Event Category and Subcategory of the Event. Seems you are missing something here.
For more information, see the Help Portal under
http://help.sap.com/ -> SAP R/3 Enterprise, Release 4.70 -> SAP-NetWeaver Components -> SAP Web Application Server -> Basis-Services / Communication Interface -> Business Workplace and Services -> Alert Management -> Alert Category
4. Then you schedule Background job for generating Deadline Alerts. Job SWWDHEX is schedule for this purpose. This is done in Automatic Workflow Customizing(SWU3) --> Maintain Runtime Environment -->Schedule Background job for Missed Deadlines
See also
Note 1051787 - SRM notifications not displayed in UWL
Regards
Virender Singh

E-mail Alert Notification Action doesn't work

Don't receive Alert notifications on email.
Attributes-> Actions-> Critical Action send to email.
At occurrence Critical Alert of the notification are not sent on email.
If a host or the agent are not accessible, the notification is sent on my email.
How to solve this problem or where see Actions log.
I use the built in module of sending notificationns email.sh.
Whether it's necessary to adjust on each server "Sendmail" for sending notifications or to adjust "Sendmail" on a server where it's installed SunMC.
Enough in that case it's better to use Halcyon PrimeAlert EventAction????
Any Idea?

You're right: if you're using the default out-of-the-box email actions, then you need to make sure sendmail is set up on every system with an Agent.
Quite often production systems are running restricted Solaris installs without sendmail, or are behind a firewall that denies email.. that's when you'd really want EventAction (so you only need sendmail on your SunMC Server).
EventAction really is the way to go for any kind of SunMC notification/integration... ...but I work for Halcyon, so you have to assume I'm a biased vendor :)
Regards,
[email protected]
http://www.HalcyonInc.com

Cisco Ironport Certificate ISsue

Hai All,
We have cisco ironport WSA 370 version 7.5 .
We need to decrypt some https traffic . But the issue is our corporate AD support only 2048 bit cert. But our WSA box only support 1024.
Heared that asycos 7.7 (new release) support 2048 bit cert. When i check the 7.7 guide, its not mentioned. Can you please suggest???

Hi Mohamed,
There is a feature request so the WSA can generate 2048 bit certificate; but you can upload a an Intermediate root signing certificate to the appliance.
Look for "Uploading a Root Certificate and Key"
https://www.cisco.com/en/US/docs/security/wsa/wsa7.7/User_Guide/WSA_7.7.0_UserGuide.pdf
HTH,
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach"
http://www.cisco.com/web/partners/tools/pdihd.html

HTC Trophy Alerts/Notifications

For those that have used the phone, a few questions about various HTC Trophy alerts/notifications--for things like missed calls, voicemails, SMS/MMS messages, emails, etc.: 1. For any of those items mentioned above, is there a way to have an alert/notification that not only appears on a live tile but in some other place (perhaps even where you can read part of a message that was sent and/or see who called for a missed call)? 2. Is it possible to set any of these alerts/notifications to be repeatable? For example, if you have a missed call or a new text message, but you weren't by your phone when you got it, could you set things up so that it alerts you every few minutes or so if you wanted to? 3. There seems to be a notification LED present on the phone, is it used for anything else other than battery charging notifications (perhaps again for something like missed calls, voicemails, messages, etc.)? Is it configurable in any way? Thank you.

Strange, for some reason none of the spacing was retained in my first post and it all just appeared as continuous text.
In any case, now that some people have had the phone for a bit, anyone observed anything in the way of (repeatable) alerts/notifications for missed calls, voicemails, text/picture/video messages, etc. as well as any relationship of those alerts/notifications to the notification LED that should be located essentially within the Verizon logo at the top of the phone?

Will I get an alert/notification on my iphone when i first log into icloud control panel on my PC

Will I get an alert/notification on my iphone when i first log into icloud control panel on my PC

You can only create the account on a Mac or an IOS device. Then you can use it on your PC.

Alert notification whenver stock is posted to a Sto location

Hi Gurus,
My client has following requiremets:
1 An alert notification to be generated to QC department whenever the stock is posted to the sto loc QCH1(inspection lot number should be updated in the alert)
2 An alert to be generated QC department whenevr there is sales good return.(The sto loc is GRN1)
Please guide me how this is possible.
Do we need to use workflow or some enhancements.
Please give details about how to proceed with the enhancements.
Thanks iin advance
Regards
Ankush

Hi
I think you did not understand my earlier reply. Whenever GR is made when you tick print and choose individula slip in genral tab the requirement is triggered for a message. Utilize that for notification. It can be sent as mail or idoc which can be received in 3rd party system as well.
In output determination for your inventory message schema you should have your output type. (config in output determination)
Then maintain condition record in MN21 for your output type, transaction/event type WE, Print version is 1, print item also 1, and choose simple mail option, send immediatly option and in communication give receipient. It will work as a simple mail
Regards
Antony

Ical alert notification issue

I had a .mac account that was converted to mobile me, and then to icloud. Whenever someone sends me an ical invite to my .me address, i do receive an email but not an alert/notification on my iphone. If the invite is sent to .mac address i do receive the alert. In fact, sinceOS5 i dont beleive i am receving any alerts from .me ical. . I have checked all the settings. The only thing that makes sense in in the icloud settings unders account it says @mac.com, instead of me.com. I can not change it, I have tried signing out and signing back in under .me but it switichign account right back .mac. Anyoen else experiencing this? i think this is somethign that apple will need to fix but i dotn have teh slightest how to get them to do it?? any help would be great! thanks!

Yes, there are at least 2 other threads discussing the same problem. This seems to be happening to a lot of people, including me. I have only seen one possible fix (trashing the preference file and starting over), but this seems to be a widespread problem and not one involving personal preferences.

Alert notification is sent with incorrect language

Hello experts,
I have configured technical monitoring in Japanese language.
In the workcenter, the monitoring screen is displayed in Japanese.
But the alert notification is sent in English like following image.
I want to receive the notification in Japanese language.
Could you please tell me how to correct the notification language?
Best regards,
Takashi Nasu

Hi Takashi,
The automatic emails are generated by the background job
'SAP_ALERT_CALCULATION_ENGINE' which created the alerts. This job is
setup in SM37 to run the program 'ACE_CALCULATION_CONTROLLER' in
English language. Hence the email is in english.
Please change the language in the job step to Japenese.
Kind regards,
Roland

Cisco IronPort Alert Notification 12/15/2011

Similar Messages

Maybe you are looking for