Cisco Ironport SMA is not sending reports to my e-mail account

Hi,
We have a centralized system using a SMA M170 as the manager and other two WSAs S170. All the environment is been monitored by the SMA.
I have configured some scheduled reports to send to my e-mail address, but it is not working, because I'm not receiving these reports.
Does anybody has any idea what's going on? Am I forgetting any configuration?
Regards,
Roberto

Do you have a SMTP route specified?

Similar Messages

Can receive but not send email from my domain mail account. Also have two mailboxes with the same name. One has an exclamation mark at the end. I'm unable to delete this mailbox.

Mailbox duplicated with exclamation mark

cape wrote:
Setting up a Gmail account with Leopard Mail is trivial... (as long as you don't want to use IMAP, then it's a bit more involved).
Why would you not want to run IMAP? Setting up Google IMAP with Mail (http://mail.google.com/support/bin/answer.py?answer=77663&topic=12761) or any other program (http://mail.google.com/support/bin/topic.py?topic=12760) is anything but trivial.

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account. Can anyone help with a solution?

You haven't set up the SMTP (outgoing) mail server correctly. You probably didn't enter your user ID and password for the outgoing server. They are needed even though it says "optional".

Why can I not send a photo by e-mail?

I can not send a photo by e-mail. I have tried every thing. What else can I do?

Pudit wrote:
I did all that.
Well ....... good. And those watching over your shoulder can easily tell just what's going on. The rest of us have to work at a disadvantage.
So, try this:
a. Say exactly what you are tying to do (we know that .... send photos in email)
b. Say exactly how you are trying to do it
c. Describe what you expect to happen or to see when you do it that way
d. Describe, completely, what happens instead, including any error messages
e. Give a complete summary of what you've read, what resources you've accessed, and what troubleshooting steps you have already tried.
If you'd done that to start with you'd already have answers targeted to your specific problem. The more of it you do the better others can see what's going on and what the problems and solutions might be.

TS3276 Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.

Is your web browser working normally?

I installed iOS8 on my iPad. Now iCloud does not send emails to my apple mail program on my MacBook Pro.

I installed iOS8 on my iPad. Now iCloud does not send emails to my apple mail program on my MacBook Pro.

Hello agniman,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud mail issues:
iCloud: Troubleshooting iCloud Mail
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

HT201303 Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail the answers or did not make opportunity to have as an option to reset my security questions on line.

Please help me. I have forgotten my security answers on two questions. It is not easy to restore it. Apple support did not send me on my e-mail the answers or did not make opportunity to have as an option to reset my security questions on line.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97776)

My Apple ID verification e-mails are not coming through to my e-mail account.

My Apple ID verification e-mails are not coming through to my e-mail account. How can I fix that?

Hi there Lenore1936,
You may find the troubleshooting steps in the article below helpful.
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620
-Griff W.

Can I retrieve contacts that I deleted from an email account on my IPhone that I no longer have access to? I have synced the contacts with my computer and have not synced since I deleted the mail account on my Iphone. Can I still retrieve the contacts?

can I retrieve contacts that I deleted from an email account on my IPhone that I no longer have access to? I have synced the contacts with my computer and have not synced since I deleted the mail account on my Iphone. Can I still retrieve the contacts on my home computer?

This might be a problem as it is a company mail account that I no longer work for.
Could I...
Plug iphone into pc and click Restore in iTunes?
Then using ICloud, retrieve all the data lost in the restore?

I am not receiving email on my iCloud mail account what should I do?

II am not receiving email on my iCloud mail account what should I do?

iTunes gift cards are only valid on accounts based in the country in which the card was issued - so if you have a US account then you can only use US gift cards. Do you know anybody in the country where you bought it from that you could sell or give it to ? Or you could try selling it on a site such as eBay.

Sending report output via E-mail (excel pivoted format)

Hi all,
i have a written a report where i need to send the report output to somebody via
E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field length should be adjusted as per the output field length.
i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
any idea will be highly appreaciated.
Regards
if not p_email1 is initial.
     perform fill_report_csv.
     perform f_send_internet_mail.
endif.
FORM fill_report_csv.
   data :   l_text(232) type c,
           v_matnr1(21) type c,
           v_matnr(21) type c,
           v_matkl(14) type c,
           v_maktx(45) type c,
           v_ttlstk(14) type c,
           v_verpr(14) type c,
           v_werks(14) type c,
           v_lgort(14) type c,
           v_char(10) type c,
           v_stks type p ,
           v_po(40) type c,
           v_qty(13) type c,
            v_qty1 type sy-datum,
           v_date(15) type c,
           v_date1(15) TYPE C,
           v_name(35) type c,
           v_eknam(18) type c,
           v_lifnr(15) type c,
        l_po(40) type c,
        v_matnr(20) type c,
         l_rate(11) type p decimals 5,
         l_flag type c.
concatenate c_equal c_colon 'PO no.' c_colon
                into v_po.
concatenate c_equal c_colon 'Material no.' c_colon
                into v_matnr.
concatenate c_equal c_colon 'Description.' c_colon
                into v_maktx.
concatenate c_equal c_colon 'Due Qty.' c_colon
                into v_qty.
concatenate c_equal c_colon 'Del Date.' c_colon
                into v_date.
concatenate c_equal c_colon 'Vendor.' c_colon
                into v_name.
concatenate c_equal c_colon 'Buyer.' c_colon
                into v_eknam.
concatenate c_equal c_colon 'Vendor Code.' c_colon
                into v_lifnr.
concatenate
         v_po v_matnr v_maktx v_qty
         v_date v_name v_eknam v_lifnr
         into i_download
         SEPARATED BY con_tab.
append i_download .
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
clear wa_output.
loop at i_output into wa_output.
   on change of wa_output-ebeln.
     clear v_lines.
     loop at i_eket into wa_eket
             where ebeln = wa_output-ebeln.
       v_lines = v_lines + 1.
       clear wa_eket.
     endloop.
**-- Checking of page break
     v_lines = sy-linno + v_lines .
     if 55 < v_lines .
       write:/0(161) sy-uline.
       new-page.
     endif.
clear v_lines.
      loop at i_eket into wa_eket
              where ebeln = wa_output-ebeln.
        v_lines = v_lines + 1.
        clear wa_eket.
      endloop.
*-- Calculating the due qty.
    wa_output-dumng = wa_output-menge - wa_output-wemng.
*-- Writing the Line items of the PO.
    read table i_ekpo into wa_ekpo
          with key ebeln = wa_output-ebeln
                   ebelp = wa_output-ebelp.
     l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
*-- Writing of PO detail
     if wa_output-dumng gt 0 .
     v_qty = wa_output-dumng.
    v_date1 = wa_output-eindt.
    v_maktx = wa_output-maktx.
     if wa_output-maktx+0(1) = '"' .
            concatenate c_equal wa_output-maktx
               into v_maktx .
         else .
            concatenate c_equal c_colon wa_output-maktx c_colon
               into v_maktx .
         endif .
   if wa_output-name1+0(1) = '"' .
            concatenate c_equal wa_output-name1
               into v_name .
         else .
            concatenate c_equal c_colon wa_output-name1 c_colon
               into v_name .
         endif .
    v_name = wa_output-name1.
    v_lifnr = wa_output-lifnr.
     write wa_output-eindt to v_date1 DD/MM/YYYY.
     concatenate '="' wa_output-ebeln '/'
            wa_output-ebelp '"' into v_po .
     concatenate '="' wa_output-matnr '"' into v_matnr .
         concatenate c_equal c_colon wa_output-maktx c_colon
           into v_maktx .
          concatenate c_equal c_colon wa_output-dumng c_colon
           into v_qty1 .
           concatenate c_equal c_colon wa_output-eindt c_colon
           into v_date1 .
          concatenate c_equal c_colon wa_output-name1 c_colon
           into v_name .
            concatenate c_equal c_colon wa_output-eknam c_colon
            into v_eknam .
          concatenate c_equal c_colon wa_output-lifnr c_colon
           into v_lifnr .
          concatenate c_equal c_colon wa_mard-werks '/'
           wa_mard-lgort c_colon
           into v_lgort .
             concatenate '="' wa_output-lifnr '"' into v_lifnr .
condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
     concatenate
         v_po v_matnr v_maktx v_qty
         v_date1 v_name v_eknam v_lifnr
         into i_download
         SEPARATED BY con_tab.
    concatenate con_cret i_download INTO i_download .
    append i_download .
endif.
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
endloop.
ENDFORM.                    " fill_report_csv
*&      Form f_send_internet_mail
      text
--> p1        text
<-- p2        text
FORM f_send_internet_mail.
Variables
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
data : found_receiver type c,
       v_title(80) type c,
       l_text(180) type c.
Fill the document data.
gd_doc_data-doc_size = 1.
Adds text to email text table
append 'Pls see attached open purchase order report.' to it_message.
append '' to it_message.
concatenate 'Note: This is system generated report'
              ', figures may subject to actual physical count.'
              into l_text separated by space.
append l_text to it_message.
Populate the subject/generic message attributes
CLEAR gd_doc_data.
READ TABLE i_download INDEX w_cnt.
gd_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( i_download ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name   = 'SAPRPT'.
if p_asdate is initial .
     concatenate p_title ' '
              sy-datum sy-uzeit into v_title separated by space.
else .
    concatenate p_title ' '
             p_bldat p_cputm into v_title separated by space.
endif .
gd_doc_data-obj_descr = v_title .
gd_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = i_download[].
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = 'XLS'.
it_packing_list-obj_descr = 'OPEN PURCHASE ORDER' .
it_packing_list-obj_name   = 'PO.XLS' .
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
assign SAP user smtp address from successful retrieval.
loop at p_email.
Add the recipients email address
     found_receiver = 'X' .
     it_receivers-receiver = p_email-low.
     it_receivers-rec_type = 'U'.
     it_receivers-com_type = 'INT'.
     it_receivers-notif_del = ''.
     it_receivers-notif_ndel = 'X'.
     append it_receivers .
endloop .
Add default recipient email when unable to locate purc group email
   if found_receiver is initial .
       it_receivers-receiver = p_email.
       it_receivers-rec_type = 'U'.
       it_receivers-com_type = 'INT'.
       it_receivers-notif_del = ''.
       it_receivers-notif_ndel = 'X'.
      append it_receivers.
   endif .
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
Instructs mail send program for SAPCONNECT to send email.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = ' '
                    and return.
endif.
ENDFORM.                    " f_send_internet_mail

Hi,
go through this link,
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
you have some sample programs.
Regards,
Raghavendra

Send Report to several e-mail addresses problem!

Hi,
I want to deliver a report to several e-mail addresses because every page is personalized and has to be delivered to a special e-mail address.What can i do?
Please help!
Thanks in advance.
null

hello,
this functionality is available in reports 9i which will be part of 9iAS Release 2.
regards,
the oracle reports team

IPhone wont send email from a certain mail account

I know the settings are right, but the iPhone wont send mail from one of my mail accounts (hosted by the company i work for, which offers mail hosting as a service, and has hundreds of other iPhone users with the same account settings.)
The progress bar that indicates "sending" zips by suspiciously quickly when I hit Send, but there is no audio confirmation. Then the email is gone - its not in my Sent Items folder, and its not in the Drafts folder and its not in my broom closet.
From what I understand, if one SMTP server isn't available, it should default to the AT&T SMTP server, but it apparently doesn't even get that far, because the phone must think it's sent the message, or it would end up in the Drafts folder (or Outbox, I can't recall), which is what I would normally experience if I had no service at the time I was sending the message. I have two other accounts that work normally on the iPhone. Nothing has been recently changed with the SMTP server in question, which works fine with all my other devices.
I've tried:
• deleting the account and re-adding it manually (four times)
• deleting the account and syncing it with my computer (three times)
• hard resetting the iPhone
• ensuring that the primary SMTP server for this account is, in fact, switched to "On" in Settings->Mail, Contacts, and Calendars, <mail account>-->SMTP (which brings me to another question: how do I edit this list? Is it automatically populated by the accounts in my Mail app?
• screaming from my back porch
Ideas?
Email Account type: IMAP
Authentication type: MD5 with SSL
Port: 587
8GB 3G iPhone, Software version 2.2.1

One thing that might help.
If your primary server is hosted by your company, double check the outgoing settings.
Host Name:
Use SSL:
Authentication:
Server Port:
If it zips through your primary server without effect, try turning the primary server off and one of the secondary on.
If connected to Edge or 3G, you can use ATT's SMTP server.
If issue still persists, then set up a gmail or yahoo account to test with.
Both are free email services.
If still fails, then general troubleshooting might help.
Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/TS1275
You might need to reset and or restore the iphone to resolve any software issues.
Hope this helps.

I cannot send from one specific BT Mail account but can access folders using IMAP.

Thunderbird 31.3.0 on WIndows 8.1 64 bit.
I have two email accounts configured into Thunderbird.
Both are BT accounts and have identical configurations.
IMAP is used for reading mail, SMTP for sending mail.
On one I can read folders, delete emails from the Bulk Mail folder, fetch and send mail.
On the other I seem to be able to do everything except send mail.
I can read mail, delete SPAM, but for some reason not send emails.
Both accounts are using "mail.btinternet.com" as the IMAP and SMTP server.
I am using Thunderbird as a back up email client to deal with a very few messages which cause major problems with my main email client which is Windows Live Mail 2012. I have double checked and the mail server details are the same between the two and my WLM client can send emails to the same SMTP server on the same port as Thunderbird fails on.
I know the password is correct because I can connect over IMAP and delete SPAM using Tbird.
The only difference that I can see between the two accounts is that one is "@btinternet.com" and the other is "@talk21.com".
The symptoms - I see the progress bar with "Connected to mail.btinternet.com..." and green all the way across.
Some time later I get a separate warning saying "Login to server mail.btinternet.com failed".
Because of the time delay I am assuming that the session has timed out.
I am also assuming that if the credentials were wrong the rejection would have been immediate (although the delay may be to reduce the effectiveness of brute force attempts to guess the password).
So I know that the IMAP credentials are O.K. - I can access the mailbox.
I know that the SMTP credentials are O.K. - I can send mail from WLM using the same settings.
Further confusion - I know that it worked in the past because I have a test message in my Sent mail from when I first set up Tbird.
This is all very weird.
Has anyone else seen something similar?
Also, is there a debug option where I can trace the SMTP protocol when the email is being sent?
Cheers
LGC

Update: - I sent two separate test messages and saved both the failing emails as Draft to retry after restarting Tbird.
I've just noticed that they are both in a Drafts folder on my mail server.
Not, however, the Drafts area for emails composed using the web mail client but under a separate Folders tree.
I can't send the email with the web mail client, although I can forward it.
So further proof that the IMAP side is working.

Can't send emails on my yahoo mail account. gets stuck in the outbox. tried deleting and reinstalling but it didn't work., can't send emails on my yahoo mail account. gets stuck in the outbox. tried deleting and reinstalling but it didn't work.

every time i try to send an email from my yahoo mail account it gets stuck in the outbox. i have tried reinstalling my email account but it doesnt work

Have you tried setting up your Yahoo account using Mac Mail instead of dealing with web based mail?
It only takes a minute to set this up.
Open Mac Mail. From the menu bar top of your screen click Mail > Preferences then select the Accounts tab then the Account Information tab.
Click +
Enter your name, Yahoo user name and password, click Create.
If you'd rather not do that, it would help to tell us which Mac OS X you have installed and which version of Safari in your reply.

Cisco Ironport SMA is not sending reports to my e-mail account

Similar Messages

Maybe you are looking for