Cisco ise 1.1.3 patch 3 and Windows 8

Hello,
Cisco NAC Agent does not display on my windows 8 computer. I have Cisco ise 1.1.3 and Nac Agent 9.8.0.52. Can you help me?

I suspect the below listed defect here:
CSCue41912 Posture : NAC agent not triggering on WIN8.
~BR
Jatin Katyal
**Do rate helpful posts**

Similar Messages

ISE 1.2 EAP Chaining and Windows 8 - Auth failures

Hi All,
I've got a couple sites that appear to have issues with EAP chaining, ISE 1.2 and Anyconnect client on windows 8 enterprise.
Basically the windows 8 machines authenticate intermittently and randomly but largely fail auth.
Often the client will work perfectly for a boot even after a few reboots etc and then might stop working. Other clients won't work at all no mater what settings you configure.
Outer Method - EAP-FASTv2
Inner Method - MSChapV2
ISE 1.2 with Patch 1 (latest)
Windows 8 Enterprise - with patch http://support.microsoft.com/kb/2743127
Anyconnect Client 3.1.0466 (latest)
Machine and User Auth Against AD.
Cert checks disabled for testing.
Clients using same configuration.xml file
Symptom is Anyconnect prompts for username / password instead of using existing credentials. Typing credentials doesn't work.
Logs show failed "anonymous" authentications or client EAP timeouts.
Cheers
Peter.

Hi Peter,
It sounds like the Inner Method is not being negotitated properly so its only reading the Outer Method which by default is set to show "Anonymous" in AnyConnect Profiles.
Is it possible to upload a PDF version or copy paste the output of the failure from ISE's perspective?
Kind Regards,
Vlad

Cisco ISE 1.1.4 Patch 7 (Internal Endpoint Mac Addresses Getting Disppeared)

Hi Folks,
I am having issue that mac addresses which we are trying to add under Internal Endpoint Group for MAB getting disappear automatically after few minutes. We tried multiple mac addresses but result same. We can see the mac address which we added earlier but new mac address getting disappear. Is there any limit to add mac address under Internal Endpoint. We have following licenses.
L-ISE-ADV-1K-M= Cisco ISE 1000 EndPoint Advanced + Base Migration License
Thanks

Tabish,
We'll update the latest patch and then look for the work around from any one of our Cisco experts

Cisco ISE 1.2 AD Auth and Internal Auth on Same SSID?

Hello everyone... I'm fairly new to Cisco ISE 1.2 and am looking to try and setup a certain configuration. I'm trying to figure out how to create what amounts to a BYOD dmz'd wireless network that is PEAP based (or tls) but authenticates known users (employees from AD groups) but for users not found in those AD groups uses the internal user database and/or Web Auth? Make sense?
So, I of course can get the Authentication/Authorization policies configured for PEAPTLS and make to AD based on group and provide a VLAN number. No problem... I'm having trouble wrapping my head around how to combine the internal users or web auth users in this mix on the same ssid? I know by reading the ISE statement that the authentication policy if PEAP/TLS, ect is used, then a user not found is rejected and does not continue... Can someone provide an example as to how to accomplish this?
As a side note in 1.2, is there the ability to limit the number of consective logins as in ACS, outside of guess access only? What about in 1.3, which makes me nervous to upgrade in reading the instructions and the 'newness' of it.
Thank you for any help, it's greatly appreciated.

I'd like to confirm if the required changes in the VM server were
made, as there are a few changes in the ISE OS. The changes required are
listed in the release notes, under "VMware Operating System to be
Changed to RHEL 5 (64-bit)". Here's a direct link to the relevant section:
http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.html#wp384531
Other causes can be :-
certificate issue on ISE or not enough disk space.

Cisco ISE 1.2 and Cisco ACS 5.4 patch 6 and support for snmp version 3

does anyone know if cisco ISE version 1.2 patch 8 and Cisco ACS 5.4 patch 6 support snmp version 3?
ciscoISE/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
ciscoISE/admin(config)# snmp-server
Ciscoacs/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
Ciscoacs/admin(config)# snmp-server

No support SNMP v3 on ISE v1.2 and 1.3 except for profilling
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/cli_ref_guide/ise_cli/ise_cli_app_a.html#12768
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/cli_ref_guide/b_ise_CLIReferenceGuide/b_ise_CLIReferenceGuide_chapter_0100.html#ID-1364-00000d30

Cisco ISE guests and Ironport

Hi All,
I'm currently writing a HLD for a Cisco ISE rollout in my organization, and I've come across sort-of-an-issue:
I'm planning on getting the guests in through the ISE Guest portal, but I also want to push them through an authenticated proxy(for accounting purposes) instead of a transparent one... however, I can't seem to find a way to somehow integrate Ironport and ISE in order to achieve some sort of an SSO, to avoid users having to enter their credentials twice(guest portal and ironport)- has anyone got a working solution for this?
Any constructive input appreciated!
Thanks!

Thanks for the swift responses and suggestions!
I'll most certainly have a look at the proposals...
However, I still want the guest users to go through the S370, as it's not only for accounting purposes, but I want them to authenticate, since it would make tracing and pinning events to a person way easier - that's the main reason why I'm trying to find a solution that might act like an SSO. The business side stated that signing in twice(ISE guest portal, then proxy) is unacceptable. I know that there's no direct integration between ISE and Ironport at the moment, and I am going to put in a feature request for that, but for the time being, I am really keen on getting this to work somehow...
BTW - I'm currently using a virtualised ISE, release 1.1.4., And I've got the 3395's on order...

Cisco ISE with EAP-FAST and PAC provisioning

Hi,
I have search with no result on this topic. So, Does anyone have implemented Cisco ISE authentication with EAP-FAST and PAC provisioning ?
Since I have an issue with internal proxy, user required to authenticate with an internal proxy before granting access to the internet.
If you have any documents, it would be appreciated for me.
Thanks,
Pongsatorn

From what I understand a Internet proxy PAC and a eap-fast PAC are two different purposes.
Is that what you are trying to get clarification on.
Basically eap fast PAC provisioning is a PAC that s provisioned when a client authenticates successfully. The client provides this PAC for network authentication and not proxy authentication.
Sent from Cisco Technical Support iPad App

Cisco ISE trying to posture a device that should not be able to be postured

Overview:
Cisco ISE version 1.1.4. Windows PC will be postured using Web NAC agent. Mobile devices (Apple/Android) can't be postured and will be exempted from posturing. Mobile devices will be exempted using the condition EndPoints:PostureApplicable EQUALS No. This worked fine and mobile devices will be caught by this condition while Windows device will be caught by another that sends to posturing.
Mobile device authorisation policy configured:
Problem:
A few days later, mobile devices doesn't seem to end up in the policy that has EndPoints:PostureApplicable EQUALS No. After having a look at monitoring, Cisco ISE is classifies mobile devices as Posturable. The Posture Status previously was "NotApplicable" now shows up as "Pending". See below.
Troubleshooting:
I tried a total of 4 different mobile devices. 2 Apple and 2 Android. All of them have the Posture Status of "Pending". Interestingly after a few tries, both the Androids starting working and have the PostureStatus of "NotApplicable", no configuration changes were made. The 2 Apple device still doesn't work and show up as "Pending".
I have restarted ISE, Access Point and Apple device. I have also tried other Apple device. All with the same problem.
Have any of you guys experienced this before?

Hi,
I have also experienced the same issues as yourself and would recommend opening a tac case. However I have used the device registration web portal to redirect all previous detected mobile devices to accept the aup and have them statically assigned to an endpoint group so they do not hit this scenario.
I know it is a workaround but its the only way i could get this to work and not affect devices that were one time detected as such.
Tarik Admani
*Please rate helpful posts*

Cisco ISE integration with AD fails

Cisco ISE Ver: 1.1.2.145
Windows : Win 2003 Server
I am attempting to integrate ISE with AD, but ISE won't join AD and joining attempts fails, though I am able to add same domain as external LDAP identity store ?
1.user used to join the domain has admin permission on AD
2. ISE resolved the domain correctly
3.There is a firewall inbetween ISE (192.168.100.10) & AD (172.16.100.1), but all the traffic are permited.
4. No NATing taking place, Firewall is forwarding all trafic between ISE & AD
Can't really understand why AD connection fails
From ISE Interface - Detailed Test Connection
Adinfo (CentrifyDC 4.5.0-357)
Host Diagnostics
Uname: Linux Iseadn 2.6.18-274.17.1.el5PAE #1 SMP Wed Jan 4 22:49:48 EST 2012 I686
OS: Linux
Version: 2.6.18-274.17.1.el5PAE
Number Of CPUs: 1
IP Diagnostics
Local Host Name: Iseadn
Local IP Address: 192.168.100.10
FQDN Host Name:iseadn.gnet.cp
Domain Diagnostics
Domain: Gnet.cp
Subnet Site: Default-first-site-name
    DNS Query For: _ldap._tcp.gnet.cp
    Found SRV Records:
      Gnet.cp:389
Testing Active Directory Connectivity:
    Domain Controller: Gnet.cp
      Ldap:      389/tcp - Good
      Ldap:      389/udp - Good
      Smb:       445/tcp - Good
      Kdc:        88/tcp - Good
      Kpasswd:   464/tcp - Good
      Ntp:       123/udp - Good
Domain Controller: Gnet.cp:389
    Domain Controller Type: Windows 2003
    Domain Name:            GNET.CP
    IsGlobalCatalogReady:   TRUE
    DomainFunctionality:           2 = (DS_BEHAVIOR_WIN2003)
    ForestFunctionality:           0 = (DS_BEHAVIOR_WIN2000)
    DomainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
Forest Name: GNET.CP
    DNS Query For: _gc._tcp.GNET.CP
Testing Active Directory Connectivity:
Forest Name: GNET.CP
Kerberos Error: Rc=-1765328377 SASL Bind To Ldap/[email protected] - GSSAPI Mechanism With Kerberos Error : Server Not Found In Kerberos Database
Computer Account Diagnostics
Not Joined To Any Domain
System Diagnostic
Not Joined To Any Domain
Centrify DirectControl Status
Not Joined To Any Domain
Licensed Features: Enabled
SELinux Status:                 Disabled
Amavis1.1.0
Ccs1.0.0
Clamav1.1.0
Dcc1.1.0
Dnsmasq1.1.1
Evolution1.1.0
Ipsec1.4.0
Iscsid1.0.0
Milter1.0.0
Mozilla1.1.0
Mplayer1.1.0
Nagios1.1.0
Oddjob1.0.1
Pcscd1.0.0
Postgrey1.1.0
Prelude1.0.0
Pyzor1.1.0
Qemu1.1.2
Razor1.1.0
Ricci1.0.0
Smartmon1.1.0
Spamassassin1.9.0
Virt1.0.0
Zosremote1.0.0
From Ad-agent log

Hi Jallaluddin
I work for Centrify Support and saw your posting. Here our analysis on checking the adlogs.txt.zip:
Server not found in Kerberos database" (reference base/adbind.cpp:495 rc: -1765328377)
That error is likely coming from the KDC - meaning there is some problem with server side SPNs
We need the following:
1) A network trace.
2) adcheck output.
3) adinfo --support output
4) Run dcdiag or netdiag on the server side.
Also we partner with Cisco and so would it possible to work with your partners and I am pretty sure they have seen this before with DC issues etc. Can you please work with them and see?. TIA
Best Regards
Raghu Srinivasan

Cisco ISE Guest Login

Hi,
I have a weird problem; after a guest user account has been created on Cisco ise 1.1.4 patch 8; when the guest user is redirected to the ise guest portal; the first login is always unsuccessful. Upon entering the login credential and password correctly; the client would be redirected to the same login page. Upon retrying the process a few times; it would succeed after 2-3 times.
On the ise authentication; I see a guest authentication error; "Guest Authentication Failed : 86020: Unknown exception" with only a single step seen on the logs for troubleshooting "5431 Guest Authentication Failed"
I would like to check if anyone has seen such an issue/behaviour?
Any suggestions is appreciated.
Thanks.

No it doesn't, you can test the same , while editing the wireless SSID profile, opting authentication method as smart card other than PEAP/EAP.

Cisco ISE Active Endpoint Usage Reset

Hi,
I have a Cisco ISE running version 1.1 and I was wondering if it may be possible to reset the license usage/active endpoint shown on the dashboard? This was noticed after a restore of ISE due to replacement of hardware and I noticed that the license usage count/active endpoints does not seems to go down.
The following methods have been tried however without any success:
1. Reboot ise server/service
2. Disable all network devices making use of ise such that there are no clients/devices accessing it; example switch/wlc/etc...
3. Deleted all endpoints usage in identies/identies group
4. Disable profiling on ise
As the ise has been installed with a base license; not too sure if it may be either a bad restore (all service/application are working though) / bad radius accounting which does not timed out on the ise / etc...
Any help is appreciated on how to reset the active endpoint/license usage.
Thanks.

Here is a method for removing the stale records. Please give this a try:
http://www.cisco.com/en/US/docs/security/ise/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1072950
Thanks,
Tarik Admani
*Please rate helpful posts*

Cisco ISE - General Info. & capabilities

Hello All,
I've read quiet a bit of ISE features, but would like to know the following:
1. Can ISE provide/track details of user activity, like which servers/websites he accessed over a period of time?
2. Can it provide details of how much data was transferred from a particular server to a specific client?
3. For a 1500 user env. (1000 desktops and 500 wireless devices) which model of ISE would be appropriate?
4. How would having ISE be different from already deployed authentication services like Active Directory or built-in application authentication for solutions like Oracle ERP systems?
5. I see ISE as being marketed primarily for wireles devices (BYOD), but how would it help for wired devices (or does it become and unecessary authentication level apart from AD, switch based 802.1x, etc)
Thank you.
Regards,
Adnan

Cisco ISE is a consolidated policy-based access control system that incorporates a superset of features available in existing Cisco policy platforms. Cisco ISE performs the following functions:
•Combines authentication, authorization, accounting (AAA), posture, and profiler into one appliance
•Provides for comprehensive guest access management for the Cisco ISE administrator, sanctioned sponsor administrators, or both
•Enforces endpoint compliance by providing comprehensive client provisioning measures and assessing device posture for all endpoints that access the network, including 802.1X environments
•Provides support for discovery, profiling, policy-based placement, and monitoring of endpoint devices on the network
•Enables consistent policy in centralized and distributed deployments that allows services to be delivered where they are needed
•Employs advanced enforcement capabilities including security group access (SGA) through the use of security group tags (SGTs) and security group access control lists (SGACLs)
•Supports scalability to support a number of deployment scenarios from small office to large enterprise environments
The following key functions of Cisco ISE enable you to manage your entire access network.
Provide Identity-Based Network Access
The Cisco ISE solution provides context-aware identity management in the following areas:
•Cisco ISE determines whether users are accessing the network on an authorized, policy-compliant device.
•Cisco ISE establishes user identity, location, and access history, which can be used for compliance and reporting.
•Cisco ISE assigns services based on the assigned user role, group, and associated policy (job role, location, device type, and so on).
•Cisco ISE grants authenticated users with access to specific segments of the network, or specific applications and services, or both, based on authentication results.
ISE 3315 can support 1500 users with appropriate license.

Cisco ISE 1.2 Ise Application doesn´t install

Hello,
I am trying to install Cisco ISE on a VMWare Paltform, and the installation goes OK for the ADE-OS (The Os is installed, but the ISE application doesn´t install.
Any Hint in how to solve that ?
BR,
Julio

Hi all,
Thank for your answers, the problem was that the ISO image on the Cisco software repository was corrupted. I finally did a md5 check, and downloaded the image 4 times.
The for images download matched the md5 checksums between themselves, but not the Cisco webpage. Finally a TAC engineer had to publish the image form me, and when downloaded from this link It matched the CCO md5 and it worked fine.
BR,
Julio.

Cisco ISE with multiple Network interface

Hello,
I am deploying Cisco ISE 1.2 in a distributed deployment and the requirement is to use external Radius proxy feature. ISE PSNs are designed to have 2 L3 NIC's, Eth0 for administration and Eth1 as client side facing NIC for Radius requests. I am interested to know would Cisco ISE in version 1.2 use Eth1 interface to send RADIUS authentication request to external RADIUS Proxy server.
Could not find above information in Cisco SNS-3400 Series Appliance Ports Reference.
http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_app_c-ports.html
Thanks
Kumar

Thanks Ahmad for the reply.
Cisco ISE uses standard RADIUS authentication and authorization port to send request to Exteranl RADIUS proxy. As per the interface/port refrence guide of version 1.2 this is listed that is causing a confusion :-
Eth0
Eth1
Eth2
Eth3
Policy Service node
Session
•UDP:1645, 1812 (RADIUS Authentication)
•UDP:1646, 1813 (RADIUS Accounting)
•UDP: 1700 (RADIUS change of authorization Send)
•UDP: 1700, 3799 (RADIUS change of authorization Listen/Relay)
External Identity Stores
and Resources
•TCP: 389, 3268, UDP: 389 (LDAP)
•TCP: 445 (SMB)
•TCP: 88, UDP: 88 (KDC)
•TCP: 464 (KPASS)
•UDP: 123 (NTP)
•TCP: 53, UDP: 53 (DNS)
(Admin user interface authentication and endpoint authentication)
In external Identity Stores and Resources it says Eth0 is used for (Admin user interface authentication and endpoint authentication), where under sessions it lists that all ports can be used for RADIUS Authentication and Authorization.
I am not sure what I am missing to understand between the two if you can highlight that.
Thanks
Kumar

Cisco ISE doesn`t send packets to AD

Hello!
I`ve tried to configure authentication through AD. Intergation Cisco ISE with AD is successful and I can retrive all groups from AD. I`ve configured dot1X authentication (Policy>Authentication) to use at first AD, then Internal Users.I`ve configured the rule for one group in authorization policy (Policy>Authorization), I`ve added this group from AD (Administration> Identty Management> External Identity Sources> Active Directory> Groups).
When the user tries to connect to LAN and enters credentials from AD, Cisco ISE always uses only Internal Identity Source and doesn`t try to seach user in AD. I don`t see any packets to AD in Operations>Authentication and TCP Dump, Cisco ISE only checks Internal Identity Source.
Does anybody know how to solve this problem?
Thank you!

Problem was in wrong configuration Authentication.
Now I have the folowing problem, ISE can`t authenticate wired guest user through Central Web Access.
Guest Portal sends message about succeful authentication and after that redirect again in Guest Portal.
I have two rules in Policy>Authorization (attach: Auth).
In Operations>Authentication I see folowing (attach: Guest)
In defaultguestportal I have "Both" authentication and sequence from 3 Identity Stores (Intetnal Users, Internal Endpoint, AD)

Cisco ise 1.1.3 patch 3 and Windows 8

Similar Messages

Maybe you are looking for