Cisco ISE and ATA 188 profiling.

I have tried to profile cisco ATA 188 adapter, based on cdp attribute;
Platform: Cisco ATA 188
and assigned to a create a same identity group. I am not able to see device profiled according to identity group assigned. Instead of it its always assigned to "cisco - device" group.
On cisco switch side, i am seeing device being in data domain instead of voice domain, but strange enough its getting ip address from voice dhcp pool. If dot1x configs are not applied on port device is getting ip address from voice vlan and working fine.
Any suggestion for this case?

Can you post a screenshot of the custom profiling policy that you configured?
Also, what version of code do you run on the switch and ISE

Similar Messages

  • Cisco ISE and authentication for 802.1x printer

    Hello
    What is the best practice to authenticate a 802.1x printer in Cisco ISE?
    The printer can store a certificate for authentication and support EAP-TLS.
    Thanks for answer.
    Marco

    EAP-TLS is the way to go. It is way way way more secure than MAB and profiling. However, the question is "How much of a hassle is it going to be to put a certificate on each printer?" Moreover, "What methods do I have (if any) to renew those certificates when they expire?" If have to manually generate a CSR and install a cert on each printer then it can quickly become an administrative overhead nightmare. With that being said, you can use MAB and profiling but just make sure that you lock down the access that those printers get. For instance, do they need access to the internet? Do they need access to anything else but the print server and/or open to all IPs access but only on the printing ports. 
    I hope this puts you in the right direction!
    Thank you for rating helpful posts!

  • Cisco ISE windows workstation endpoint profiling

    Hi all,
    i am configuring cisco ISE to autenticate wireless clients using 802.1x . AP's are all lightweight managed by a cisco 5508 WLC . I would like to discriminate users accessing that wlan using mobile phones or tablet from users connecting using windows workstations. ISE profiles all mobile devices in the right way, iphones and ipad are profiled as apple devices and even MAC OSX devices are profiled correctly. The problem is that all windows workstation are profiled as unknown devices.In ISE i'm using windows workstation default profile configuration.
    what can i check to make windows workstation profile working correctly?
    Thanks in advance.
    Regards

    i noticed that default profile for microsoft workstations uses dhcp probe to profile devices, so i solved the issue adding in our core switch, to the vlan interface used to tag dot1x wireless lan,  ise ip address as ip helper-address. I don't know if that is the best solution or there's something i can do on WLC to avoid adding ip helper-address on vlan interface but this worked for me.
    Thanks to all for helping me.
    Regards

  • Cisco ISE and SecurID Integration Questions

    I'm looking for some clarity trying to understand something conceptually. I want to integrate Cisco ISE with RSA SecurID, the idea being that if the user authenticates with RSA SecurID they end up on one VLAN, however, if they don't authenticate with (or don't use, or don't have) SecurID they'll end up on another VLAN. Note that I'm not using SecurID for wireless access...all PCs are wired to Ethernet.
    We have been using RSA SecurID for a while and are currently on version 8.0. Our users are authenticating via the RSA Agent typically on Windows 8.1. Instead of the usual Windows login prompt, the RSA Agent first prompts for the username and passcode (they use an app on their smartphones to get the passcode), then after a moment or two, it prompts for their Windows domain password.
    We have recently installed Cisco ISE version 1.3. With the help of a local Cisco engineer and going through the "Cisco Identity Services Engine User Guide", I have it set up and running along with a few 'test' ports on our Cisco 6809 switch, it basically works...as a test it's simply set up that if they authenticate they're on one VLAN, if not, they end up on another (this is currently without using RSA...just out-of-the-box Windows authentication).
    The Cisco engineer was unable to help me with RSA SecurID, so pressing on without him, out of the same user guide I have followed the directions for "RSA Identity Sources" under the "Managing Users and External Identity Sources", and that went well as far as ISE is concerned; I am now ready to get serious about getting ISE and SecurID working together.
    My mistake in this design so far was assuming that the RSA agent on the Windows client PCs would communicate with Cisco ISE...there doesn't seem to be a way to have them point to a non-RSA SecurID server for authentication. The concept I'm missing is what, or how, the end-user machine is supposed to authenticate taking advantage of both ISE and SecurID.
    I have dug deeper into the Cisco ISE documentation but it seems heavily biased towards Wi-Fi and BYOD implementations and it's not clear to me what applies to wired vs wireless. Perhaps it's a case that I'm not seeing the forest for the trees, but I'm not understanding what the end-user authentication looks like. It apears that as I learn more about ISE, it should become the primary SSO source, that SecurID becomes just an identity source and the PC clients would no-longer directly communicate with the SecurID servers. That being the case, do I need to replace the SecurID client on the PCs and something else Cisco-ish fills this role? An agent for ISE? How do they continue to use their passcode without the RSA agent?
    Thanks!

    The external db not operation indicates that there is no communication between ACS and RSA. Did you fetch the package.cab file to analyse the auth.log file?
    Have you already gone through the below listed link?
    http://www.security-solutions.co.za/cisco-CSACS-1113-SE-4.2-RSA-Authentication-Manager-Integration-Configuration-Example.html
    Regards,
    Jatin Katyal
    - Do rate helpful posts -

  • Inline Posture between Cisco ISE and Wireless LAN Controller

    Hi,
    I was looking into Cisco ISE solution for deploying NAC.
    I have a question about the network topology.
    In  the user guide documents of cisco ISE, it is written that for Wireless  LAN Controllers (WLC) and VPN devices, an additional server, Inline Posture, is needed.
    However, in the following integration document, there is not an inline posture between WLC and Cisco ISE server.
    https://supportforums.cisco.com/docs/DOC-18121
    I  want to know if Inline Posture is a requirement, if not a  requirement, what are the benefits of having it between Cisco ISE Server  and WLC.
    Thanks & Regards
    Sinan

    Hello,
    Please go through below mentioned links which might be helpful for you.
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ipep_deploy.html
    http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_deploy.html
    Best Regards,

  • Cisco ISE and WLC Access-List Design/Scalability

    Hi,
    I have a scenario whereby wireless clients are authenticated by the ISE and different ACLs are applied to it based on the rules on ISE. The problem I seems to be seeing is due to the limitation on the Cisco WLC which limit only 64 access-list entries. As the setup has only a few SVI/interfaces and multiple different access-lists are applied to the same interface base on the user groups; I was wondering if there may be a scalable design/approach whereby the access-list entries may scale beside creating a vlan for each user group and applying the access-list on the layer 3 interface instead? I have illustrated the setup below for reference:
    User group 1 -- Apply ACL 1 --On Vlan 1 
    User group 2 -- Apply ACL 2 -- On Vlan 1
    User group 3 -- Apply ACL 3 -- On Vlan 1
    The problem is only seen for wireless users, it is not seen on wired users as the ACLs may be applied successfully without any limitation to the switches.
    Any suggestion is appreciated.
    Thanks.

    Actually, you have limitations on the switch side as well. Lengthy ACLs can deplete the switch's TCAM resources. Take a look at this link:
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/68461-high-cpu-utilization-cat3750.html
    The new WLCs that are based on IOS XE and not the old Wireless/Aironet OS will provide the a better experience when it comes to such issues. 
    Overall, I see three ways to overcome your current issue:
    1. Shrink the ACLs by making them less specific
    2. Utilize the L3 interfaces on a L3 switch or FW and apply ACLs there
    3. Use SGT/SGA
    Hope this helps!
    Thank you for rating helpful posts!

  • Cisco ISE and Fast User Switching

    Greetings,
    In our deployment, we are interested in utilizing the "Fast User Switching" that is contained within the Windows Functionality.   After searching for quite a while, I see that the native Windows supplicant is not compatible with Fast User Switching.   It does not appear that Anyconnect is either.   Can you please inform me as to what suppluicant I would need to research in order to allow for the User Switchign Functionality?
    We are currently using ISE 1.2 Patch 4.
    Thank You for any assistance.
    David

    The  NAC Agent for Cisco ISE does not support Windows Fast User Switching  when using the native supplicant. This is because there is no clear  disconnect of the older user. When a new user is sent, the Agent is hung  on the old user process and session ID, and hence a new posture cannot  take place. As per the Microsoft Security policies, it is recommended to  disable Fast User Switching.
    Source:
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_pos_pol.html

  • Cisco ISE and forest trusts vs domain trusts

    Hi All,
    Is there any issues with forest trusts with Cisco ISE ?
    I have a customer that had external trusts and ISE was working ok for PEAP MSChapv2 user auth across domains.
    They recently removed external trusts and changed to forest trusts.  Now auth doesn't work.  Initial error was authc ok, authz fail.
    I can search and get lists of AD groups ok for the remote domain. 
    Using the attribute tab, I can't get attributes for users in remote domain.  I'm thinking since I can't see the memberof attribute, none of my authz pollicies will work.
    I have done "leave" and "join" domain again.
    In my lab, I have forest trusts and it actually works ok.  A previous poster talked about kerberos issues across forest trusts ?
    Cheers
    Peter. 

    http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_ug.pdf
    Kindly find the steps on the page no.170

  • Cisco ISE and Switch 3560-X

    Good Morning,
    I am conducting an implementation of Cisco ISE version 1.2.1.198 with all its features on a switch 3560-X and in the ISE compatibility chart the minimum version for this switch would be the IOS v 15.0.2-SE2 (ED).
    My doubt is whether i need the feature ipbase or just the lanbase would be sufficient to meet all the features of 802.1x for the Cisco ISE.
    I appreciate the attention and Thanks,

    Please see the "Cisco Secure Access and Cisco TrustSec Release 5.0 System Bulletin".
    It notes that the 3560-X requires IP base license for all the 802.1X features.

  • Cisco ISE and NDES?

    Wanting to use Cisco ICE in front of Windows Server 2012 or R2 NDES.  The following article states that NDES should NOT be clustered or load balanced and setting a single password is not supported.
    https://social.technet.microsoft.com/wiki/contents/articles/12610.network-device-enrollment-services-ndes-frequently-asked-questions-faq.aspx#Can_I_use_a_Static_Passphrase_across_multiple_NDES_servers_and_then_load_balance_them
    The Cisco article says to disable the password altogether and lock the IPs down to the ISE devices in IIS that will access NDES.
    http://www.cisco.com/en/US/products/ps11640/products_tech_note09186a0080bff108.shtml
    If NDES is configured this way and dedicated to Cisco ISE will this be a supported configuration by Microsoft?  If the password is turned off altogether can two NDES servers then be load balanced as the password generation is not an issue.
    Thanks

    Hi,
    Please refer to this article.
    CA cluster and NDES
    http://blogs.technet.com/b/techniatures/archive/2011/07/07/ca-cluster-and-ndes.aspx
    Regards,
    Mike
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Cisco ISE and external syslog server

    Hi Security Experts,
    We are starting with deploying cisco ISE (Identity Services Engine) in our network. We have allocated 250GB space for (Admin+Monitor) ISE node.
    I want to know if we can send the logs from monitoring node to external syslog server after a defined time interval.
    For example, logs which are more than 10 days old should be sent to external syslog server. So basically our monitoring node will have logs which are at the max 9 days old. Is it possible? Could you point me to some doc which explains configuration of the same?
    Thanks,
    Kashish

    No this isnt possible via syslog. What you are looking for is database purging, so that the monitoring database is purged after a specific time interval. Here is a guide that will help shed some light on this:
    http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_mnt.html#wp1054328
    Tarik Admani
    *Please rate helpful posts*

  • Cisco ISE and NAM profile

    Hi,
    Is there any way to push configuration.xml created localy via NAM configuration profile tool to all clients dot1x then they connects to Cisco Catalyst Swithes and make AAA with ISE-->AD.
    Cisco ASA can do it for VPN client (push them xml profile), any similar things with ISE possible?
    thanks

    You have the ability to push a file with ISE, however after you modify the configuration.xml file you then have to select repair device, which you can not do that easily. You can try to have ISE deploy a script where the client downloads the file from an ftp server and then the script repairs the network adapter.
    That will however require some knowledge on scripting.
    Thanks,
    Sent from Cisco Technical Support iPad App

  • HTTP Error 403 - Forbidden on Cisco ISE and SCEP RA

    Dear Experts,
    We are in process of deploying ISE 1.2 in our environment for BYOD.
    The initial step of this process is to configure ISE as an SCEP Proxy and it requires certain configuration on the local CA. We have done all the required configurations on the local CA server.
    Now, when we try to connect ISE with the local CA using SCEP RA Profiles, it gives "HTTP Error 403 - Forbidden". The URL we are using is http://ipaddress/certsrv/mscep/mscep.dll.
    It seems that the local CA is not letting the ISE access the mscep.dll file. Now I dont understand how to allow ISE to access this file or the url. Please advise if there is any step by step process guide. Although, I have followed the ones from Cisco but it doesn't state how to give ISE the required rights for accessing mscep.dll.
    Thanks in advance.
    Jay

    Jay,
    You should use this URL:
    https://ipaddress/certsrv/mscep
    If you try to get the cert from an http address, you will get an error.  You should be using https.  Also, the mscep.dll should not be part of the URL.
    You can test this connectivity from any browser by putting that URL in the sddress bar.  You should see a page similar to this:
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Cisco ISE and WLC Timeout Best Practices

    I am fairly new to ISE. Our Cisco WLC is using 802.1x and ISE is configured for PEAP with all inner methods enabled.
    I am looking for some guidance around where I should be configuring timeouts. There is a PEAP Session timeout in ISE, a session timeout on the WLC and a RADIUS reauthentication timeout that can be set in the Authorization profile results object in ISE.
    Currently I have the WLC configured for its default 1800 second timeout and ISE PEAP timeout at the default 7,200 value.

    I ended up answering my own question. The authorization session timeouts should be set in ISE if at all.
    Once I removed the session timeout value from the WLC and used the re-auth value in the ISE policy I had less complaints about disconnects.
    The session timeout on the PEAP settings has not caused any ill affects at it's default. The session resume has taken a huge load off of AAA though. Its worth turning on.

  • Cisco ISE and Authentication Failed VLAN

    I am trying to setup ISE to assign a VLAN to unauthorized computers. I tried using "authentication event fail action authorize vlan 666" command but unfortunately I'm using multi-auth because we have users with bridged VMs and Cisco does not support it (http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/configuration/guide/sw8021x.html#wp1454875).
    Is there a way to make an Authorization/Authentication profile within ISE to assign the VLAN to failed devices?

    You can set endpoint protection status to quarantine, and establish policies  that assign different
    authorization profiles, depending on the status of the  endpoint.
    Quarantine essentially moves an endpoint from its default VLAN to a  specified Quarantine VLAN. The
    The Quarantine VLAN must be previously defined  by a network administrator and supported on the
    same NAS as the endpoint.  Unquarantine reverses the quarantine action, returning the endpoint to  its
    original VLAN.
    The quarantine and unquarantine actions are performed  as a result of established Authorization Rules
    that are defined to check for  EPSStatus
    http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_eps.html#wp1219979

Maybe you are looking for